Used Machining centers (vertical) X-axis travel 400-599mm for sale (230)

Condition: good (used), Year of construction: 2000, Hello I have for sale a 5 axis CNC milling center DECKEL MAHO DMU 50 V evolution. The machine is connected and working. _ Type: 5 axis milling center Manufacturer: DMG DECKEL MAHO Model: DMU 50 V evolution Cgjlqstt Ntfe Eg Tqst Control: HEIDENHAIN TNC430 Country of manufacture: Germany Year of manufacture: 2000 _ Machine parameters: - number of axes: 5 - working table dimensions (length x width): 500 x 380 mm - maximum spindle speed: 18,000 rpm - spindle power: 15 kW - X/Y/Z axis travel: 500/420/380 mm - C/B axis travel: 180/360 degrees - maximum feed rate: 20 m/min - total power: 40 kVa - machine dimensions (L x W x H): 2800 x 2300 x 2600 mm - total weight: 6000 kg

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller model: Fanuc 16i MA, A used Stama Fanuc CNC machining center, type MC 014 i-A with Fanuc control. Main spindle SK 30 Tool positions: 14 X travel: 500 mm (indirect measuring system) Cslq Egsv Ulklo Tqogt Y travel: 380 mm (indirect measuring system) Z travel: 300 mm (indirect measuring system) Air consumption: 1000 l/min Pneumatic pressure: 5-6 bar Control: FANUC 16i MA Connected load: 9 kVA Valve voltage: 24 V DC Control voltage: 24 V DC Operating voltage: 400/50 V/Hz

Condition: good (used), Year of construction: 1998, x-travel 500 mm y-travel 400 mm Colq Egev H Sdvj Tqsgt z-travel 400 mm Control Heidenhain weight of the machine ca. 3,2 t

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Used Haas TL-1 Tool room lathe with CNC control, quick change tool post, operators manual and a 3 jaw chuck. Great used CNC lathe. SPECIFICATION Specification Swing over apron 406mm Swing over cross slide 241mm Celq Ejnq Ddgeg Tqegt Distance between centres 762mm Spindle speed 0-2000rpm Spindle motor 5.5kW Spindle nose A2-5 Spindle bore 59mm MACHINE EQUIPPED WITH:- Operators Manual Quick Change Tool Post and Holders 3 jaw chuck Coolant system Guarding

Condition: used, Year of construction: 2011, operating hours: 30,700 h, Functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 450 mm, feed length Y-axis: 270 mm, feed length Z-axis: 310 mm, controller manufacturer: Siemens, spindle speed (min.): 15,000 rpm, operating hours of spindle: 30,700 h, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 24, Vertical CNC machining center FZ08K W Magnum Drilling capacity in St60 Ø 16 mm Tapping Ø 16 Milling capacity in St60 60 cm³/min Cjlqsv U Um Ao Eg Tqsgt Digital main drive with spindle Air-operated, with tool clamp monitoring 2.2 kW at 100% duty cycle 7.2 kW at 25% duty cycle Travel paths X = 450 mm X = 270 mm Z = 310 mm Tool changer Pick-up chain magazine 24 positions HSK-A 40 DIN 69893 Workpiece changing device 0/180° Clamping surface 2 x 660 x 350 mm With thread and locating holes M16 Ø15H7 Digital feed drive for X, Y, and Z axes With direct drives and Indirect absolute position measuring systems Siemens CNC 840D Windows XP Termocontrol Signal light Coolant system KF 150 / FKA 500 Connection 4x hydraulics / 2x pneumatics High-speed package Rapid traverse speed 70 m/min in the X, Y, and Z axes Acceleration 1.0 g in the X-axis – 1.5 g in the Y-axis – 2.0 g in the Z-axis Speed: 15,000 rpm Chip conveyor Rotary table package AWUP100 – 4th axis Measuring probe Renishaw OMP 40-2LS Scale package in all axes Extraction unit with air purifier

Condition: good (used), Functionality: fully functional, table load: 200 kg, overall weight: 5,200 kg, spindle speed (max.): 12,000 rpm, maximum load weight: 200 kg, Equipment: documentation/manual, rotational speed infinitely variable, Doosan T 3600 D CNC Vertical Machining Center Fanuc control unit Still in operation, can be seen, tried, your body. Specifications: X-axis travel distance: 520 mm Y-axis travel distance: 360 mm Z-axis travel distance: 350 mm Fast X-axis travel: 48 m/min Y-axis rapid travel: 48 m/min Z-axis rapid travel: 56 m/min Max. Spindle speed: 12,000 rpm Max. Spindle power: 13 kW Table length: 650 mm Table width: 375 mm Max. table capacity: 200 kg Number of tool stations: 21 Tool acceptance: BT30 External dimensions: Length: 3684 mm Width: 1729 mm Height: 2507 mm Weight: 5,200 kg Cjlq Ejwbqqcsg Tqegt

Condition: refurbished (used), Functionality: fully functional, travel distance X-axis: 475 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 200 kg, rotational speed (max.): 42,000 rpm, table diameter: 450 mm, 5-axis Röders Tec RXP800DS Cgolqevvlmco Eg Tqet -completely overhauled- The machine is completely overhauled, checked and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Clearance height: 500 mm Tool changer: 52-way Spindle: HSK40E max. 42,000 rpm Tool measuring laser for tool measurement Handbox Minimal quantity lubrication Prepared for extraction system (e.g. for graphite) Spindle compensation Accuracy package Control: Röders RMS6 in current version A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our reconditioned machines on our website or on our Hüttmann YouTube channel.

Condition: used, Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 206328, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 24 m/min, feed length X-axis: 560 mm, feed length Y-axis: 410 mm, feed length Z-axis: 450 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, nominal power (apparent): 30 kVA, controller manufacturer: Fanuc, controller model: Fanuc MXP-100i, table width: 560 mm, table length: 410 mm, table load: 120 kg, overall weight: 3,850 kg, spindle speed (min.): 45 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 475 mm, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 15 [kW] - Spindle speeds : 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 560 x 410 x 450 [mm] - Rapid traverses rates (X/Y/Z) : 36 / 36 / 24 [m/min] - Cutting feed rates (X/Y/Z) : 1 - 10.000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Bras charger Cgjlqswar Sxe Eg Tqot - Tool magazine capacity : 20 PALLET CHANGER - Pallet size : 560 x 410 [mm] - Pallets number : 2 - Maximum weight upon table : 120 [kg] - Distance table / spindle nose (min./max.) : 25 - 475 [mm] POWER SUPPLY - Total installed power : 30 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.095 x 2.500 [mm] - Machine height : 2.470 [mm] - Machine weight : 3850 [kg] EQUIPMENT - CNC : Fanuc MXP-100i - Electronic handwheel - 3 colors status lamp - Coolant tank * with high-pressure pump - Air Blast - Chips conveyor - All machine documentation/books and manuals NOTES: - NEW spindle bearings changed this year - X-axis screw bearing and linear guides changed few year ago - Y-axis screw bearing changed few year ago - Repair history - We will give away all available spare parts. - Sold WITHOUT wises! - Sold WITHOUT oil mist collector! The machine is fully functional and working.

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, controller model: FANUC OM, spindle speed (max.): 12,000 rpm, No reserve price - guaranteed sale to the highest bidder! Celq Egjv Uqz Ae Tqegt TECHNICAL DETAILS X travel: 500 mm Y travel: 350 mm Z travel: 350 mm Spindle Spindle speed: max. 12,000 rpm Tool holder: BT30 Tool positions: 20 MACHINE DETAILS Dimensions: 1,800 x 3,000 x 2,500 mm Machine weight: 5 t EQUIPMENT - 2 pallets - Coolant supply

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, Fanuc Robodrill T14iA Vertical Machining Centre for sale. 1998 model with 8,000 rpm spindle and 14 tool ATC. SPECIFICATION Traverses X Axis 500mm Y Axis 380mm Z Axis 300mm Spindle Nose to Worktable Minimum 250mm Maximum 550mm Work Table Table working surface 650 x 400mm Table loading capacity (uniform load) 200kg Table surface configuration Number of T slots 3 Width 14mm Pitch 125mm Machine Dimensions Width 1550mm Depth 1900mm Height (min/max) 2067 / 2367mm Weight (approximately) 2100kg Spindle Speed range 100 – 8,000rpm Taper BT30 Feedrates Rapid traverse rate 48m/min Feedrate 1 – 30,000mm/min Toolchanger ( MAS BT30 Tools) Tool storage capacity 14 tools Tool change time – cut to cut 0.9 secs (2kg) Tool Diameter 80mm Tool Length 200mm Tool Weight 2Kg Coolant tank capacity 100 litres CNC Control System Fanuc Series 16iM Electrical Supply 415V, 3 ph , 50Hz Compressed Air Supply 5kgf/cm2 (100 litres/min) MACHINE EQUIPPED WITH:- Coolant system Lighting Cgolqjnq Dguo Eg Tqet Enclosed guarding

Condition: good (used), Year of construction: 2013, Functionality: fully functional, Machine type: 3-axis milling machine/machining center Manufacturer: Spinner Model: VC 1000 Year of manufacture: 2013 Control: SIEMENS 840D-sl Dimensions: 4240 x 2270 x 3000 (W x D x H) Weight: 9,200 kg Condition: used - fully functional Cgelq Eg Tjv Auuisqst Operating hours: approx. 21,000 Number of tool positions: 32 Travel paths: X=1000 Y=650 Z=650 mm Rapid traverse: 36 m/min Max. n spindle: 12,000 rpm Spindle mounting system: SK40 Manual digital 3D probe Chip conveyor: yes IKZ: no / preparation available, however

Condition: not inspected (used), Fanuc OM Control XYZ 600x400x460 Celsv Sunnjq Eg Tqjgt Speed 45-6000 Taper ISO 40 Tool station 16 Table 920x320

Condition: as good as new (ex-display), Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain, rotational speed (max.): 12,000 rpm, Vertical machining center YCM NXV600A - demonstration machine Control: Heidenhain TNC620 Spindle: 12,000 rpm SK40 17kW Coolant system with IKZ20 bar Handwheel Cgolq Egsvvuh Ae Tqst Tool changer: 24-way Chip conveyor The machine is located at our location in Soltau and can be viewed in operation at any time!

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : HSK40 - Spindle speeds : 12.000 [rpm] - Spindle power : 7,6 [kVA] LINEAR AXES - Travels on X/Y/Z axes : 500 / 410 / 610 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 26 - Tool exchange time : 0.7 [sec] TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 200 [kg] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 25 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1.640 x 2.100 [mm] - Machine height : 2.274 [mm] - Machine weight : 2.250 [kg] MACHINE HOURS - Number of working hours : 9070 [h] EQUIPMENT - CNC : BROTHER A00 - Electronic handwheel - Interface : RS232 - Workpiece probe : Renishaw OMP 60 - 4th axis : LEHMANN sans variateur Celq Egsuhbt Re Tqsgt - Chips conveyor - Coolant tank - Coolant through spindle : 70 [bars] - Oil mist extractor : AAF Astrosta - Electric transformer - Tool-holders : 42

Condition: used, Year of construction: 2012, Functionality: fully functional, cnc MATRIX,table diameter 500 x 400 mm,travels X 350 mm Y 550 mm Z 510 mm,spindle speed 12.000 rpm,magazine 30 tools CAT 40,4 simultaneous axes 5 eme axis positionné,arrosage center broche,convoyeur a chips. Cjlq Egsvcp Eco Tqsgt

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, machine/vehicle number: 111232, travel distance X-axis: 420 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 305 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, Working ranges: Cgjlqjv U Ehwo Eg Tqet • Axis travel: X: 420 mm, Y: 320 mm, Z: 305 mm • Table size: 600 mm x 300 mm • Maximum table load: 120 kg • Spindle: • Maximum speed: 10,000 rpm (can be increased to 16,000 rpm) • Spindle taper: 7/24 Taper No.30 (BT-30) Rapid feeds: • X, Y and Z axis travel: 50 m/min Automatic tool changer (ATC): • Tool magazine capacity: 14 positions • Maximum tool length: 200 mm • Maximum tool weight: 3.0 kg • Tool change time (tool-tool): 0.9 s • Tool change time (chip-chip): 1.7 s Other features: • Pallet change system: 180° rotary table allowing continuous machining • Control system: Brother CNC-B00 • Machine dimensions: 1,456 mm x 2,644 mm • Machine weight: 2,600 kg

Condition: used, Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 169119, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, number of spindles: 1, number of slots in tool magazine: 30, tool mount: 40 mm, Equipment: documentation/manual, rotational speed infinitely variable, Control: Mazatrol 640 Nexus X-way: 560 mm Y-way: 410 mm Z-way: 510 mm Table size: 900x410 mm Bdsbn T Trokn Dxqokbsa Spindle cone: MAS BT40 Cslsv U T Iljq Eg Tqegt Tool changer: 30 Spindle speed: 12000 1/min

Condition: good (used), Year of construction: 2011, 1 used 5-axis machining center Manufacturer Quaser Type MF 400/12 C Serial no. 306B110024 Year of manufacture 08/2011 Control, Siemens, type 828D, Technical data Cgelqjtr Um Tj Eg Tqjt Spindle mount Bt 40 Spindle speed 12000 rpm Number of tool positions 48 Travel path x 410 mm Travel path y 610 mm Travel path z 510 mm Diameter of rotary table 400 mm Swivel range 30 – 120 degrees axis A Axis B 360 degrees Connected load 21 KVA Own weight 7,300 kg, Dimensions L/W/H = 282x250x307, Equipped with Internal spindle cooling Chip conveyor

Condition: refurbished (used), Year of construction: 2010, Functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 240 mm, overall weight: 6,000 kg, spindle speed (max.): 42,000 rpm, 5-axis HSC milling machine Röders RXP500DSC with linear direct drives in all axes and torque drives in the rotary axes. Travels: X450mm, Y400mm, Z240mm Spindle / table distance: approx. 315mm - Linear direct drives in all axes - wear-free Specification: - Tool changer places: 19 - Cooling unit for drives, motors, spindle and cable cabinet - Measuring laser for the fully automatic measuring of milling tools (length / diameter / contour / cone angle) as well as wear monitoring including tool cleaning before measuring - Handbox - Remote maintenance - Automatic 3D probe including calibration ball in the tool changer - Minimal quantity lubrication - emulsion cooling - Spindle HSK40E with max. 42.000 rpm - Spindle compensation - Zero point clamping system Erowa integrated in the machine table - manual operating of chuck clamping - Automation package for retrofitting the machine with a pallet changer - Handbox Cgolq Ejtt Argog Tqet The machine is overhauled in our house and is now in almost new condition. The machine can be inspected and tested under power after completion at our site. Please make an appointment with us!

Condition: ready for operation (used), Year of construction: 1995, Make: MAZAK Type of machine: V 414 Year of manufacture: 1995 Control system: Mazatrol M32 Machine's weight: 6.450 kg Tool holder: SK 40 x-travel: 560 y-travel: 410 z-travel: 460 Speed range: 50 - 7.000 U/min max. Table load: 500 kg Overall dimensions: 3,20 x 2,80 x 2,50 m Cgelq Eg Tjunq Uxeqjt Table dimensions: 1.100 x 410 mm Number of tools in the magazine: 30 Pl.

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, Equipment: chip conveyor, rotational speed infinitely variable, Control: SIEMENS SINUMERIK 828D Technical specifications and features: x-travel: 550 mm y-travel: 550 mm z-travel: 510 mm Speed range: 20 to 20,000 rpm Main spindle drive power: 13/9 kW Tool holder: SK40 DIN 69871 Tool magazine: 24 positions Table size: 850 x 650 mm Rapid traverse x/y/z: 24 m/min - DMG Mori IoT connector and NETservice - 3D data model in STEP format - Scraper belt chip conveyor, including 200 l tank - Renishaw touch probe kit - Internal coolant supply, 20 bar - Bed flushing via M-function - Mechanical Preparation for oil mist separator - Tropical package - External and internal air blast through the spindle center - Electronic handwheel Operating hours: approx. 4,900 h Spindle hours: approx. 1,700 h Several identical machines are available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale! Cgelqjv D Icps Eg Tqjt

Condition: excellent (used), Vertical Machine Center Chiron FZ12W Magnum Sinumerik 810 M Max RPM 8.000 rpm./min, X = 550 mm Y = 300 mm Z = 425 mm 2 x 4th axis Peiseler RT 160 hydraulik brake Nose tool SK 40, Cooling throw spindel IK ATC 20 pcs Machine is still running the production, and can be inspected any time Cgolq Eg Telng D Ajqet Machine in very good technical condition. I am giving 3 months startup guarranty

Condition: good (used), Year of construction: 2016, X axis travel: 15.75” (400 MM) Y axis travel: 20.47” (520 MM) Z axis travel: 17.72” (450 MM) Cjlq Ejwdq U Tsg Tqjgt A axis travel: + - 110 degrees C axis travel: 360 degrees Table loading area: 10.43” X 8.46” (265 X 215 MM) Allowable table load: 220 pounds (100 KG) Floor Space Required (W x D): 115.35" x 88.98" (2,930 X 2,260 MM) Height: 111.7” (2,830 MM) Machine Weight: 14,300 lbs. (6,500 KG) Standard Power Source Requirement - Fanuc: 205-235 Volts / 3 Phase/60HZ Power Capacity: 65 Amps Minimum (25 KVA) Air Source Requirement: 85 – 115 PSI

Condition: good (used), Year of construction: 2009, For sale: Chiron FZ 08W Magnum High Speed, a high-speed vertical CNC machining center, manufactured in 2009 and equipped with a Siemens 840D control. The machine is located in Armilla, Spain, and is in perfect working condition, ideal for precision machining and series production. Main Features: Brand / Model: Chiron FZ 08W Magnum High Speed Year of Manufacture: 2009 CNC Control: Siemens 840D (PCU 50 / NCU 572.5, 6 axes, 1 channel) Travel Distances: X-axis: 450 mm Y-axis: 270 mm Z-axis: 310 mm Spindle Speed: Up to 15,000 rpm Tool Holder: HSK-A 40 DIN 69893 Spindle Power: 7.2 kW (25% duty cycle) / 2.2 kW (100% duty cycle) Tool Magazine: 24 positions with automatic tool changer Tool Change Time (chip-to-chip): ~1.9 s Cooling System: Internal high-pressure cooling (up to 150 bar) High-pressure pump with dual-switchable 60 µm filter Coolant Filtration System: Automatic continuous paper filter (50 µm) 500-liter coolant tank Chip Conveyor: Chain conveyor with 100-liter chip container Automatic Loading Doors Table Size: 2x660x350 mm Maximum Table Load: 100 kg per side Rapid Traverse Speed: Up to 75 m/min (X, Y, Z) Axis Acceleration: X-axis: 1 g Y-axis: 1.5 g Z-axis: 2 g Additional Features: High-speed package (increased acceleration and faster tool changes) 0/180° Work Area Switching System with intermediate partition 3D Touch Probe Renishaw TS 27R Three-color signal light on the splash guard 230V power socket on the control panel Connection for portable handwheel ("Mini Handwheel") Celq Eg Tsv R Hlijqjgt Integrated electrical cabinet cooling Additional Spare Parts Included: This machine comes with a spare parts package from another disassembled Chiron FZ 08W, making maintenance and repairs easier. The package includes: Complete Peiseler 180° table Complete tool changer system with motor Spindle head (without motor) Operator panel keyboards Doors Various electrical components Power supply for servo amplifiers 2 servo amplifiers Chip conveyor 2 spare motors Condition & Delivery: Machine is fully operational and ready for production. Available for testing at our facility. Regular maintenance performed. Video of the machine in operation available upon request. Location & Shipping: Location: Armilla, Spain Shipping and commissioning can be arranged upon agreement. For more information, contact us via phone or email. We are available to answer any questions and provide additional technical details.

Condition: excellent (used), Year of construction: 2006, FAMUP MCP 45 CNC machining center TECHNICAL DATA axes Number of axes: 3 X-axis: 450 mm Y-axis: 300 mm Z-axis: 400 mm Feed rate Work feed X,Y,Z: 10`000 mm/min Rapid feed X,Y,Z: 30`000 mm/min Working pressure force X,Y: 2000 N Working pressure force Z: 3300 N Pallet Dimensions: 400 x 300 mm Number of grooves: 2 Groove width: 14 mm Groove spacing: 80 mm Max. Table load: 100 kg Cgoloq U Rm Hoq Eg Tqet Changeover time: 9 sec. Spindle Spindle motor power: 5 kW Speed: 10`000 rpm Tool changer Magazine slots: 16 Max. Tool diameter: 63 mm Max. Tool length: 150 mm Max. Tool weight: 4 kg Tool change time: 1.7 sec Weight: Approx. 3000 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.