Used Gea Meat Processing for sale (208)

Condition: excellent (used), GEA MegaSlicer for cooked meats. In lovely condition. With outfeed conveyor not shown in photos. Bodpfx Aex Ni H Ejnqjww

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h Bsdpfjvhctwjx Anqjww - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Bsdoyvav Nopfx Anqjww

Condition: used, all stainless steel electrically heated heating separately adjustable in two areas adjustable speed belt width 600 mm hood with electromechanical lifting system Bjdpe Af Iy Hjfx Anqoww Suitable for steam injection (to heat up and to improve product yields) 180 kW / 275 A suitable for CIP cleaning system with extra infeed en outfeed conveyor outside dimensions (l x w x h) : ± 9.500 x 1.900 x 3.700 mm

Condition: like new (used), Year of construction: 2021, Almost brand new condition. Bought in 2021 and only used for a few months before factory Bankruptcy. Great saving on new price. Bwsdpfx Anex Hazusqjw

Year of construction: 2010, condition: ready for operation (used), A high-pressure homogenizer GEA is available. Stroke: 100mm, plunger diameter: 80mm, max. operating pressure: 200bar, throughput capacity: approx. 14000l/h, max. product temperature: 90°C, max. process temperature cleaning/sterilization: 140°C, machine dimensions X/Y/Z: approx. 2250mm/1600mm/1600mm, weight: approx. 3500kg. Including control cabinet and spare parts. The unit has new gearboxes. Documentation available. An on-site inspection is possible. Bwedpfoyx H Hujx Anqew

Condition: used, all stainless steel Bwodpj Afm Iaefx Anqsw mobile adjustable speed belt width 600 mm dimensions (l x w x h) : ± 3.000 x 1.700 x 2.100 mm

Condition: used, plastic belt with flights height of the flights 15 mm distance between the flights 100 mm belt width 400 mm outfeed height ± 1.250 mm infeed height : ± 900 mm Bwsdpfxo Af Iyxs Anqew total dimensions : ± 1900 x 1250 x 1550 mm mobile

Condition: excellent (used), Year of construction: 2012, Large grinder for fresh meat, these models were previously known as Wolfing C250UNI. Excellent condition. With de-gristle unit. Bwodovvn Icspfx Anqsw

Condition: used, A complete line from weigher to shipping case, offered as one set Bodpfx Anjz R Itvjqeww This automatic line weighs products, packs them in bags and places the bags in shipping cases, in one continuous process. On top sits a Yamato Dataweigh multihead weigher in stainless steel, which doses the product accurately into a GEA CFS SmartPacker SX400. This vertical form-fill-seal machine has the Quattro Seal version, for four-side sealed bags that stand up well. The SmartPacker has automatic film unwinding, integrated sealing units and a touchscreen with recipe management. After packing, a BluePrint Automation HVP system from 2003 takes care of product handling and transport, after which a Rembrandt Packaging / Lantech case packer from 2005 places the bags in cases automatically. The associated conveyor systems are included. The line suits a range of dry and free-flowing products, depending on configuration, and is only offered as a complete set. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Complete weighing, packaging and case packing line Weigher: Yamato Dataweigh multihead weigher, stainless steel Packaging machine: GEA CFS SmartPacker SX400 (VFFS), Quattro Seal Product handling: BluePrint Automation HVP, built 2003, serial no. V0784, 16 kVA, 230/400 V 50 Hz Case packer: Rembrandt Packaging / Lantech RCE-I-T-M, built 2005, 400 V 50 Hz, 2 kW, 6 bar Conveying: Associated conveyor systems included Suitable for: Dry and free-flowing products, depending on configuration Offered: As a complete set only

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Equipment: compressor, Manufacturer: GEA Wiegand Year of manufacture: 2001 Infeed capacity: up to 40,000 kg/h Water evaporation rate: approx. 10,000 kg/h Steam compressor Bwsdpfozzyuuox Anqsw - Manufacturer: PILLER - Motor power: 200 kW - New motor installed in 2017 - Includes a new spare motor Previously used for whey processing Control system not included Without preheating (heat exchanger) Condition: very good, fully functional

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Manufacturer: GEA / CFS Type: Smart Packer CX180 Year of manufacture: 2012 Design: Vertical form, fill and seal machine (VFFS) Performance: Bwedpfx Ane Ahrnloqjw Maximum output: up to 85 bags/minute, depending on the product and packaging format Output for mozzarella balls: approx. 65 bags/minute Electrical connection: 5.5 kW Machine weight: approx. 750 kg

Condition: used, Consisting of: “Thermopac - WANSON” thermic oil installation Type 200B 10 FT container natural gas burner power: 233 kW 3 x 400 V, 50 Hz 7.5 kW dimensions (L x W x H): ± 3,000 x 2,450 x 2,600 mm + Thermal oil pump Bathyscaphe Flue gas exhaust stack + “GEA-CFS” fryer Type BR 6000/600 all stainless steel suitable for thermal oil heating infeed height : ± 900-950 mm outfeed height : ± 1.150 mm max. oil level above the belt : 120 mm suitable for fire protection with top hold down belt Oil circulation system Bwedpfx As Aawx Eenqew net belt length 6.000 mm net belt width 600 mm adjustable speed sediment removal system filter lifting unit with electrical hoists dimensions (l x w x h) : ± 8.700 x 2.200 x 3.800 mm “Saval” fire suppression system + Paper filter Type OMR 120-60 50 Hz - 400 V 4.5 kW 525 kg dimensions (L x W x H): ± 2.800 x 1.700 x 2.200 mm + Cooling conveyor with ambient temperature all stainless steel variable speed 50 Hz, 400 V 2.61 kW net conveyor length ± 6.000 mm net conveyor width ± 900 mm wire mesh belt (3 mm) dimensions (L x W x H): ± 7.600 x 1.700 x 2.000 mm

Condition: used, all stainless steel with top hold down belt water circulation net belt length 8.000 mm net belt width 900 mm adjustable speed lifting unit with electrical hoists Bwsdpfx Aez S Hvxsnqjw dimensions (l x w x h): ± 9.000 x 1.800 x 3.850 mm

Condition: used, all stainless steel Bedpfxe Aa Rkuj Anqoww belt width 400 mm mobile adjustable speed filling capacity 27 L weight: 390 kg dimensions (l x w x h): ± 2.860 x 750 x 1.450 mm With adjustable take-over outfeed conveyor

Condition: used, all stainless steel speed up to ± 50 strokes / min. (Depending on the product, shape, temperature and machine settings) mobile with outfeed conveyor belt width 600 mm surface of the dies 570 x 130 mm suitable for dies with a thickness of min. 6 mm and max. 40 mm power 22,8 kW weight 1.750 kg Bwsdpfo Aa Riwox Anqjw dimensions (l x w x h) : ± 2.800 x1.700 x 2.600 mm 3x400v 50 Hz mobile new PLC control (Siemens) HMI Control Touch (digital readout with possibility of storing recipes)

Condition: used, all stainless steel hopper capacity 270L Bjdpfx Ajz Sy Etenqeww die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute (Depending on the product, shape, temperature and machine settings) total power 8 kW air consumption ± 300 L / min. mobile variable speed 3x400v 50hz dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg new PLC control (Siemens) HMI Control Touch (digital readout with possibility of storing recipes)

Condition: used, all stainless steel nett width 450 mm length: 1.800 mm infeed height: 1.350 mm 400V, 50 Hz, 16A Grill opening: 2 mm Bwsdpfx Ane Aawyijqjw dimensions (L x W x H) : ± 1.900 x 1.100 x 1.450 mm

Condition: used, all stainless steel water circulation net belt length 9.000 mm net belt width 900 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 11.500 x 1.600 x 3.000 mm + "IGEFA" tube heat exchanger Type 161U-159-159 Bodpfx Ansz I N Stoqoww 380 kW + Conveyor belt with flights belt width: 800 mm distance between flights: 190 mm height of flights: 50 mm

Condition: used, all stainless steel suitable for thermic oil heating 210 kW thermic capacity frying length 3.000 mm belt width 1.000 mm adjustable speed infeed and outfeed conveyor isolated canopy Bwodpfez Nhpujx Anqew 10 kW sediment removal system filter oil level control low - high oil circulation pump suitable for CIP-cleaning electrical hoists dimensions (l x w x h) : ± 6.650 x 2.300 x 3.500 mm

Condition: used, all stainless steel belt width 1.000 mm adjustable speed Bodpfxsz Rnyvs Anqoww 0,75 kW dimensions (l x w x h) : ± 1.750 x 1.300 x 1.350 mm

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, GEA Niro Soavi 3206 L Separator Bedpfsxb D S Dex Anqoww Manufacturer: GEA Niro Soavi S.p.A. Model / Type: 3206 L Serial Number (S.N.): 3812 Year of Manufacture: 1999 Maximum Working Pressure: 150 MPa (1500 bar) Nominal Capacity: 40 dm³/h (40 liters per hour)

Condition: used, cooking length ± 13.000 mm belt width 600 mm all stainless steel with electrical hoist Bsdez Imw Hjpfx Anqjww steam heated (steam generator not included): 780 kg/h (6bar) temperature distribution in 2 zones dimensions (l x w x h) : ± 14.400 x 2.000 x 2.700 mm adjustable speed

Condition: used, all stainless steel suitable for thermal oil heating heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm total length ± 9.400 mm Bwedpoz Harzsfx Anqew canopy with electric hoists Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 12.609 x 2.098 x 3.400 mm with extra outfeed conveyor: (l x b): ± 2.000 x 1.000 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New thermal oil control station : Pneumatically operated 3-way thermal oil control valves (A, B, AB) By-pass circuit Thermal oil filters Bellows-sealed shut-off valves with handwheel Temperature reading Pressure measurement Stainless-steel frame (protective side panels for hot piping and components) Stainless-steel piping and flanges (for the thermal control station only)

Condition: used, all stainless steel belt width: 650 mm total dimensions: (l x w x h) : ± 2.900 x 1.250 x 2.500 mm Bwjdpfxsz I N Rve Anqew mobile height of the flights 30 mm outfeed height ± 1.000 mm infeed height : ± 2.400 mm