Used Gea Meat Processing for sale (210)

Year of construction: 1993, condition: used, Two-stage plate heat exchanger. First stage - Heating: hot water / product Product inlet approx 61-62°C, outlet approx 72°C, flow rate 600 hl/h; Hot water inlet approx 72,5°C, flow rate 750 hl/h Second stage - Regeneration: product / product Product inlet approx. 0-4°C, product outlet approx. 61-62°C, flow rate 600 hl/h; Product inlet approx. 72°C, product outlet approx. 11-14°C, flow rate 600 hl/h Additional title: 2-stage heat exchanger Capacity: 600 hl/h Hot water: 750 hl/h Operating pressure: 21 bar Operating temperature: 100 °C Length: 2,15 m Width: 0,95 m Height: 2,15 m Dkedpfx Asztzckjpiew Weight: 5000 kg Material: EPDM HT / NBR / 1.4439

Condition: like new (used), Bought new in 2022 and only used for a few months before the factory went Bankrupt. As new condition. 1 year guarantee. Dkjdpsyivtqsfx Apijw

Condition: excellent (used), Year of construction: 2022, operating hours: 800 h, Equipment: documentation/manual, Top specification forming coating and frying line. B ought new in 2022 and only used for a few months. Fryer 6m x 650mm has 800 running hours. Dsdpozii N Dofx Apiskw

Condition: refurbished (used), The GEA Westfalia MZB10 continuous quark mixer is used within a quark line for continuous mixing of fat quark, fruit quark or spiced quark as well as for continuous dosing of cream. The two components to be mixed (quark and cream) are intensively mixed with the rotating mixing blades as they flow through the mixing head in the mixing cylinder. The mixture goes out of the unit by the outlet / drain pipe on top. The quark mixer is rotating at constant speed, produces a uniform cream quark of fine texture from the low-fat quark and cream which are fed to the mixer at constant rate. At regular intervals samples should be taken from the quark leaving the mixing blade is attached directly to the motor shaft. A hermetically shaft seal, seals the mixing chamber from the motor compartment. The mixing head can be dismantled in just a few steps and easily cleaned without the need for specialist personnel. Because of their solid consistency, fruit concentrates or spices must be mixed into a carrier liquid, usually cream, and added using a lobe pump. Because the fruit concentrate can contain whole fruits, the mixture must be combined with the low-fat curd before the mixer using a T-piece built into the low-fat curd line. The quark mixer is cleaned inline with the CIP. Capacity of end product: up to 3.000 kg/h depending on mixture composition. Motor: 4 kW - 380 V - 955 rpm - 9,3 A - 50 Hz - 3 Ph. Motor speed / mixing unit speed: 955 rpm. Specification for the dosing pump for cream (pump itself excluded): maximum feeding capacity: 990 ltr/h. Dkjdpfs Ah R Rgsx Apiow Machine Type: Mixer Output Capacity: up to 3.000 kg/h depending on mixture composition Mixing unit speed: 950 rpm Motor Current: 4 kW - 380 V - 955 rpm - 9,3 A - 50 Hz - 3 Ph Dosing Pump Cream: Maximum feeding capacity: 990 ltr/h Condition: Good

Condition: excellent (used), Almost new former direct from closed meat free facility. New in 2022 and only used for a few months. Hours to be confirmed but defintely less than 900. We also have the matching coating and frying line to go with this if needed. Dkedpfszkia Sjx Apiew

Condition: used, Year of construction: 2022, functionality: fully functional, A GEA decanter CF 3000, year of manufacture 2022, is available for sale at our location in 55569 Monzingen. The decanter is used and has minor signs of wear. Currently, the decanter is still connected to the power supply and can be inspected by appointment. Djdsz I S R Sspfx Apiokw If you are interested, we will gladly send you a data sheet with detailed information about the system upon request. Dismantling, loading, and transport are the responsibility of the buyer.

Condition: good (used), 1500 litre heated oil storage tank, was used in European food factory in conjunction with a GEA fryer. Electrically heated and jacketed. Dkedpfszkuxmsx Apisw

Condition: used, Unused GEA Niro type F01A stainless steel rotary atomiser suitable for use with GEA Niro Mobile Minor spray dryer. No atomiser wheel included. Dkodpfxe Agvz Nj Apijw

Condition: used, High spec batter enrober. 600mm wide. Dkjdpfxsyivykj Apiew

Condition: like new (used), Gea CFS Koppens Thermal oil fryer BR 3500/600 Suitable for thermal oil heating; Net belt length: 3.500 mm Net belt width: 600 mm Machine dimensions (LxWxH): 6.000x900x1.600 mm Dkodpfskvni Aox Apisw Machine weight: 750 kg. Capacity: 250 kg/h in 600 liter oil

Condition: good (used), Electric fryer direct from European meals factory. Perfect for frying burgers and nuggets. Electrically heated. Top hold down belt. In lovely condition. 4.5m frying length, high power - 305Kw model. Dedpfozkuwpjx Apiekw

Condition: used, conveyor belt width: 1,000 mm, GEA CFS Koppens inline fryer, heated by thermal oil. 3m frying length, 1000mm wide belt. Auto canopy hoist, top hold down belt. Older machine, has been in storage for a long time, previously used for frying onion bhaajis and pakora. Dsdpfx Asx Av Dujpiskw

Condition: used, GEA MultiFormer with upgraded controls by GEA. In lovely condition. Dkedpfx Apjyivyqsisw

Condition: used, Continuous fryer. Thermal oil heated, Teflon infeed etc. In nice condition but needs new control screen and plc. Dkodpoyivr Tjfx Apiow

Condition: good (used), Year of construction: 2017, Insulated cyclone by GEA, model CYCLONE CHE 394. Year 2017. With 2 reinforcement brackets. Bottom outlet DN100. Top inlet Clamp 1". Dsdpsy Hfxrjfx Apiekw Side inlets Clamp 1" and 4". No documentation available. Cyclone dimensions: Length: 650 mm Width: 560 mm Height: 1510 mm

Condition: excellent (used), GEA FlowCook 8000/600. 8 metre cook length, 600mm wide. Excellent condition, has had very little use. Electrically heated. 283 KW Dodex Ili Hspfx Apijkw

Condition: used, Year of construction: 1994, Overview  The Centrifugal Separator Type SB80-06-076 from the manufacturer GEA Westfalia was previously used at a brewery in Estonia. Due to a complete shutdown of the production plant, this unit is for sale. Till closing of the factory, the separator was used frequently. Tech Specs  Dkjdpfx Asv N Hcxepiew - 4500 rpm - with self cleaning drum Accessories  - Spare Parts - Tools

Condition: excellent (used), WetCoater 600 in lovely condition. Uprated model with HD heavy duty pump. Dodpfx Apox Hbfhoiekw

Condition: used, Year of construction: 1999, Capacity: 350 hl/h Djdpfxszty Tue Apiokw Operating over pressure: 24 bar Desing temperature: 104 °C Length: 1,6 m Width: 0,85 m Height: 2,2 m Weight: 5000 kg Features: product pump H: 9,8 bar (Hygiana CN II, GEA, 350 hl/h), booster pump H: 4,7 bar (EURO Hygia CN II, GEA, 350 hl/h), hot water pump H: 1,3 bar (Maxa -DIN 80-2ßß 4/4, GEA, 700 hl/h)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, power: 301 kW (409.25 HP), We offer a complete package of process vessels and key equipment forming part of an industrial ammonia refrigeration machine room, including one twin-screw compressor unit for -40°C operation, together with the main NH₃ vessels and auxiliary equipment, all manufactured in 2007. The set is suitable for industrial refrigeration applications including compression, oil cooling, intercooling, oil separation, liquid separation, condensation, liquid distribution, and oil collection. Main equipment included: Twin-screw compressor unit GEA Grasso Duo-Pack PB-3A for -40°C operation — complete compressor package with two screw compressors mounted on a common frame. Technical data from the attachment include: refrigerant NH₃, refrigeration capacity 301 kW (with economizer), shaft power 2 × 104 kW, motor power 2 × 132 kW, speed 2940 rpm, evaporating temperature -40°C, condensing temperature +35°C, economizer temperature -22°C, dimensions 3830 × 2370 × 2300 mm, weight 6380 kg, suction connection 2 × DN 125, discharge connection DN 100, and oil charge 160 kg. Oil cooling system: ammonia thermosyphon. Control system: GSC Oil cooler for screw compressor unit, serial no. 170049, design pressure 23/23 bar, volume 96 / 70 dm³, temperature range 0/+60°C and 0/+100°C, working media ammonia / oil + NH₃. Economizer / intercooler vessel, serial no. 19103, allowable pressure 12 bar, volume 1000 dm³, temperature range -40/+100°C, working medium NH₃. Oil separator, serial no. 5281, design pressure 23 bar, volume 0.620 m³, temperature range +5/+110°C, working medium NH₃ + oil. Horizontal liquid separator, serial no. 19102, allowable pressure 12 bar, volume 3400 dm³, temperature range -40/+50°C, working medium NH₃. Evaporative condenser coil, serial no. H070979, design pressure -1/23 bar, volume 638 dm³, temperature range -20/+120°C, working medium NH₃, capacity 745 kW. Thermosyphon / liquid receiver, serial no. 19100, allowable pressure 18 bar, volume 620 dm³, temperature range +1/+100°C, working medium NH₃. Dkedpsyrrpyofx Apiew Oil drain tank, serial no. 19104, allowable pressure 18 bar, volume 70 dm³, temperature range -40/+150°C, working medium oil + NH₃. The equipment is suitable for reuse in industrial refrigeration systems, retrofit projects, or as a source of high-value NH₃ machine room components, subject to technical verification and local compliance requirements. Important note: The installation is dismantled.

Condition: excellent (used), OptiAir unit to extract dust when predusting food products with fine flour. Dkjdsx Hamqopfx Apiew

Condition: good (used), 400mm wide screw feed former with control screen upgrade by GEA. Has been used for production of vegetarian burgers. Can be supplied with other machines to make a complete coating and frying line. Dsdpfx Apjx Almfjiokw

Condition: good (used), Compact GEA Eurotek spiral freezer for sale. Refurbished in 2021. 16 tiers, 130mm pitch, 110mm max product clearance. 500mm wide belt with 450mm useable belt width. North South configuration. Can be seen 'in situ' through November. Being removed 5th December. Dksdpfx Aeu Iw H Nepiow

Condition: excellent (used), GEA CFS OptiCoater 600 batter enrober available for immediate sale. Dodpfx Apex Hak Neijkw

Condition: used, Year of construction: 2012, GEA Milk Separator MSE 100-06-177 Year of manufacture: 2012 Maximum permissible drum speed: 7200 rpm Maximum permissible feed density: 1.0 kg/dm³ Heavy liquid: 1.0 kg/dm³ Solids: 1.1 kg/dm³ Min./max. feed temperature: 5/100 °C Max. throughput: 30 m³/h Dedpjwayr Tjfx Apiskw