Used Emco Emcomat Fb-600 Mc for sale (150)

Condition: excellent (used), Emco Super 11 CD Year of manufacture: 2004 (CE) Distance between centers: 650 mm Height of centers: 140 mm Swinging diameter over bed: 280 mm Nwodpfx Amozgrkxsuoh Swinging diameter over cross slide: 170 mm Spindle speeds: 55, 110, 200, 300, 410, 600, 1100, 2200 rpm Longitudinal feeds: 14 (from 0.03 – 0.3 mm/rev) Cross feeds: 14 (from 0.015 – 0.15 mm/rev) Tailstock quill travel: 80 mm Connection: 16 A / 380 V Dimensions: 1,350 x 800 x 1,240 mm (W x D x H) Multifix A Electrically interlocked chuck guard 3-jaw chuck Ø140 The machine is in very good condition.

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: Sinumerik ONE, _____ Nwsdszf T I Ajpfx Amujh Description: Year of manuf. : 2024 Control : Siemens Sinumerik ONE Turning diam. : 500 mm Turning length : 1300 mm Mainspindle: Technology:Belt-driven spindle Speed (max.):2.500 rpm Power (max.):42 kW Torque (max.):1.040 Nm Barcapacity:95 mm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N-400-128 Toolcarrier (X/Y/Z): Technology:Turret with 12 stations Taper:VDI40 Tooldrive:4.000 rpm, 8 kW, 45 Nm Movement in X/Y/Z:318/140/1.360 mm Rapid travers in X/Y/Z:24/12/30 m/min Tailstock: Technology:Towed Tailstock (programmable) with hydraulic Sleeve Stroke:120 mm Sleeve-ø:100 mm Cone:MK4 Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pump with High-pressure, 14 bar Toolbreakagecontrol:Electrical Oilmistseparation:Mechanical extraction, LOSMA Icarus IM Setup operations:Electronic Handwheel Further Accessory:Status lamp, Rinsing pistol

Condition: good (used), Year of construction: 2006, Machine used only for plastic. Technical details shown in attached pdf document. Nsdpfx Amsu Ibihjujwh Parts shown by hand not come.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 310 mm, spindle speed (min.): 60 rpm, spindle speed (max.): 4,200 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,880 mm, total length: 2,852 mm, chuck outer diameter: 210 mm, total width: 1,722 mm, collet bore: 73 mm, spindle nose: KK6, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machine is new and has only been used for demonstrations up to now; it has not yet produced any chips. The machine is set up and operational, and can therefore be inspected. Additional options & accessories: - Preparation for a bar feeder. - Tool measuring arm. - Chip conveyor (available upon delivery, not currently included). - 10 bar high-pressure coolant pump. - Rohm KFD-HE 210/3-KK6 3-jaw chuck. Nodpfx Amezcplyeuowh - Approx. 9 VDI-30 tool holders (7 static, 2 powered).

Condition: good (used), Year of construction: 2021, functionality: fully functional, Emco Maxmill 630, Nodpfx Amezg T I Eeuewh Year of manufacture 2021, Heidenhain TNC 620 control system, Travel range X/Y/Z 500/460/450 mm, NC tilting rotary table, Tilting range B-axis +/- 100°, Rotating range C-axis 360°, Table size 630 x 500 mm, Spindle speed up to 12,000 rpm, High-pressure coolant system, 30 bar, Tool changer with 30 positions, ISO 40, Chip conveyor, 2450 spindle hours.

Condition: used, spindle bore: 36 mm, center height: 165 mm, turning length: 650 mm, Used L+Z lathe EMCO MAXIMAT V13 Center height: 165mm Distance between centers: 650mm Spindle bore: 36mm Spindle speed range: 30-2,500 rpm Tailstock MK3, Multifix base body size A, 1 x 3-jaw chuck, machine light, bed stop, chuck guard with electrical safety interlock, indexing center that rotates with the spindle, and 1 drawer cabinet with additional operating tools. Nwedozb Ihwspfx Amuoh The machine is located in our showroom in 71334 Waiblingen-Beinstein and is available immediately. Please contact us regarding the equipment.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 75 mm, turning length: 325 mm, turning diameter: 180 mm, travel distance X-axis: 56 mm, travel distance Z-axis: 176 mm, TECHNICAL DETAILS Swinging diameter over bed: 180 mm Swinging diameter over cross slide: 75 mm Turning length: 325 mm Travel in X-axis: 56 mm Travel in Z-axis: 176 mm Spindle speed range: 20 - 6,300 rpm Spindle bearing diameter in the front bearing: 50 mm Feed force in Z-direction max.: 3,000 N Spindle bore: 30 mm MACHINE DETAILS Control: Fanuc 21T Main spindle power max.: 3.7 kW Voltage: 400 V Frequency: 50-60 Hz Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,620 mm Machine weight approx.: 1 t EQUIPMENT Automatic chuck Various accessories Nwedpfx Amozb Ekcsujh Interface for bar feeder

Condition: used, Year of construction: 2006, turning diameter 500 mm turning length 1300 mm control Fanuc 18i TB main spindle: Ø95mm mit C-ACHSE turning speed range - main spindle 0 - 3500 min/-1 drive capacity - main spindle 33 kW max. torque 800 Nm number of tool places 12 axial / 12 direkt Pos. tool taper VDI 40 output max. 8 kw max. torque 35 Nm turning speed range - driven tools 0 - 4000 U/min x-travel 318 mm z-travel 1360 mm tailstock quill taper MT 4 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Njdpfx Amezawlcjujwh Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as subject to prior sale reserved!

Condition: as good as new (ex-display), Year of construction: 2026, throat depth: 320 mm, total height: 620 mm, total width: 840 mm, total length: 850 mm, measuring range Z-axis: 400 mm, workpiece weight (max.): 200 kg, height adjustment type: mechanical, DuraVision 30 G5 small load/macro hardness testing machine for Brinell, Rockwell, and Vickers testing, conforming to standards according to EN ISO and ASTM, as well as carbon testing according to DIN. Torsionally rigid gray cast iron base for the main load range 3 kg - 3,000 kg (29.43 N - 29,420 N) PLC measuring and control electronics for monitoring the application of the load with automatic test load change and manual table height adjustment via handwheel 12MPix color camera for 3-stage zoom Motorized pivoting 3-position turret incl. 1 objective lens and 1 indenter adapter Removable clamping jaws with clamping inserts enable unclamped and clamped testing Test height 0 - 400 mm, outreach 320 mm Specimen table, support diameter 90 mm Maximum specimen weight 200 kg High-performance LED incident lighting Capacitive 10" touch display with LED backlight Integrated PC with Win 10 IoT 64-bit and 128 GB SSD storage Interfaces: 4x USB 3.0, 1x Displayport, 1x HDMI, 2x RJ45 ecos Workflow Touch Basic operating software incl. 1 test method ecos IMAGE for fully automatic, standard-compliant image analysis of Vickers, Knoop, and Brinell Automatic brightness control and autofocus with statistics and test report function ecos templates for frequently used settings ecos CODE for reading and creating QR codes ecos EXPORT EDITOR for individual customization of the export data (format: PDF, Excel, XML, CSV) User management for individual customization of access rights in ecos Workflow Touch ecos xChange - standardized data interface for bidirectional data connection (ERP, CAQ) ecos Workflow Calibration Information System supports the execution and documentation of all standard-relevant checks of the hardness tester (periodic and indirect testing of the calibrated methods). Note: An additional hand scanner is required to read a QR code (not included in the scope of supply). NKW28E05Z Ball holder 28 mm length, diameter 6.5 mm with 5 mm ball press-fitted in with certificate (EN ISO) NKW28E10Z Nsdpfx Amezfnpboujwh Ball holder 28 mm length, diameter 12 mm with 10 mm ball press-fitted in with certificate (EN ISO) L25HBDVG5 Objective lens 2.5x with Brinell SmartLight evo incl. adapter for turret for better evaluation of Brinell indentations (for DV 20/30/200/300/250/350 G5) Z46ZR Base / tool cabinet ZRG for seated and standing use max. specimen weight 500 kg Dimensions (WxHxD): 840 mm x 620 mm x 850 mm Maximum load / drawer: 10kg Best regards

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 185 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 200 mm, total height: 850 mm, total width: 780 mm, overall weight: 250 kg, spindle speed (max.): 2,000 rpm, spindle motor power: 750 W, product length (max.): 800 mm, number of axes: 3, This 3-axis EMCO PC MILL 125 was manufactured in 2000. It features an X-axis travel of 185 mm, Y-axis travel of 125 mm, and Z-axis travel of 200 mm. The machine includes an automatic tool changer with 10 stations and a clamping area of 420 x 125 mm. If you are looking to get high-quality machining capabilities, consider the EMCO PC MILL 125 vertical machining centre we have for sale. Contact us for further details. • Tool changer: Automatic, 10 stations Nsdey E S Uqepfx Amuewh • Tool holder: SK 30 (DIN 2080 / DIN 69871) • Feed rate (X/Y/Z): 5–500 mm/min • Rapid traverse: 500 mm/min • Clamping area: 420 x 125 mm • Max. workpiece weight: 10 kg • Power supply: 230 V / 50 Hz Technical Specification Taper Size SK 30

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 200 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 250 mm, controller manufacturer: EMCO, total height: 1,100 mm, table load: 10 kg, overall weight: 400 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 1,100 W, tool weight: 700 g, product length (max.): 1,135 mm, number of axes: 3, This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details. Nwjdpfx Aeyhcfkomujh • Distance spindle nose to table: 95–245 mm • Table size: 420 × 125 mm • T-slots: 2 × 11 × 90 mm • Max spindle torque: 4.2 Nm • Rapid traverse (X/Y/Z): 5 m/min • Feed rate: 0–5 m/min • Max feed force X/Y: 2000 N • Max feed force Z: 2400 N • Positioning accuracy (X/Y/Z): 0.005 mm • Repeatability: 0.005 mm • Tool stations: 10 • Max tool diameter: 55 mm • Max tool length: 50 mm • Tool change time (T1–T2–T3): 9.7 / 5 / 7.5 s • Connected load: 1.4 kW • Required air pressure: 6 bar

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Nedpfx Asxp Hudemuswh

Condition: good (used), EMCOTurn 120 CNC lathe. 160 mm between centers, complete with EMCOTronic T1 control system. Turning diameter: 180 mm, turning diameter over compound slide: 75 mm, spindle bore: 21 mm, speed range: 150-400 rpm, tool turret with 8 stations. Nwedpfx Aou Rd S Rsmuoh Ex-College machine

Condition: used, Year of construction: 2014, machine/vehicle number: S6F143651, FANUC 31iB control system, power 29 kW, main and counter spindle, spindle speed max. 5,000/7,000 rpm, travel distances X/Z = 260/610 mm, 12-position tool changer with powered tools (VDI 40), max. turning diameter/turning length = 320/550 mm, part ejector, operating hours approx. 400 hours. Nedpfx Amoy U R Nxsuswh

Condition: used, Year of construction: 2018, machine/vehicle number: S4E184751, FANUC 18i-TF control system, twin-spindle, travel ranges X/Y/Z = 160/+40/-30/510 mm, 12-position tool turret with driven tools VDI 25, maximum speed 6,000 rpm, chip conveyor, remote control, front-end bar feeder TOP etl 8-50, year of manufacture 2018, serial number 95692, L = 5,000 mm, RITTAL control cabinet, remote control. Nsdpfx Amoy U R N Eoujwh

Condition: used, Year of construction: 2011, machine/vehicle number: S4BZ4751, FANUC 18i-TB control, twin spindle, travel ranges X/Y/Z = 160/+40/-30/510 mm, 12-position tool turret with driven tools VDI 25, maximum speed 6,000 rpm, chip conveyor, remote control, front-end bar feeder TOP etl 8-50, year of manufacture 2011, serial number 92230, L = 5,000 mm, control cabinet RITTAL, remote control. Nsdpfjy U R Rpex Amujwh

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 260 mm turning length: 610 mm facing movement (x-axis): 160 mm longitudinal traverse (z-axis): 610 mm control: Siemens 810D revolution per minute: 1 - 6300 steples U/min max. torque on the spindle: 86 Nm spindle passage: Ø 42 mm external spindle dia. in forward position: Ø 80 mm feed motor: X/Z: 5000 / 7000 N rapid motion - x-axis: X/Z: 16 / 20 m/min tool turret - number of stations: 12 / VDI 30 tailstock taper ISO: MK4 tailstock adjustment: 500 (Hub) mm Main spindle capacity: 7,5 (100%=11kW) kW electrics - voltage/frequency: 3/PE ~ 400V und 50/60Hz V/Hz total power requirement: 20 kVA (11 kW) Weight approx.: 4,0 t dimension machine xH: 3,0 x 2,0 x 2,1 m Further technical specifications: C-axis Distance main spindle - tailstock: 805 mm Power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Coolant device, coolant supply via tool turret Switch cabinet with cooling, Rittal type SK3393100 Workpiece collecting tray Nwedpfx Aju Ixwijmush Machine lighting Accessories: 1x driven tool i.D. *

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 430 mm turning dia. over face-slide: 210 mm turning length: 510 mm facing movement (x-axis): 150 - 160 mm longitudinal traverse (z-axis): 300 - 510 mm control: Fanuc 21T revolution per minute: 6300 U/min max. torque on the spindle: 17,5 Nm external spindle dia. in forward position: 45 mm tool turret - number of stations: 8 Main spindle capacity: 11 kW electrics - voltage/frequency: 400/50 V/Hz total power requirement: 17 KVA Weight approx.: 2,4 t Nwjdpfx Asyw Hmfemuoh dimension machine xH: 2,2 x 1,4 x 2,0 m The EMCO TURN 345 is a compact and powerful CNC lathe designed for the precise machining of individual parts as well as small and medium-sized production runs. It is characterized by its robust construction, high reliability, and ease of operation. Equipped with the proven Fanuc Series 21-T control system, the machine ensures precise and stable process control as well as straightforward programming using standardized G-code. *

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Nodovvtpxepfx Amujwh Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler With hinged chip conveyor Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! *

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 340 mm turning dia. over face-slide: 158 mm turning length: 300 mm facing movement (x-axis): 300 mm Nwsdpfx Ameylt Nzjujh longitudinal traverse (z-axis): 300 mm control: Siemens 810T revolution per minute: 60 - 4.000 U/min max. torque on the spindle: 106 - 145 Nm external spindle dia. in forward position: 80 mm feed motor: 8500 N rapid motion - x-axis: 6 m/min tool turret - number of stations: 8 tailstock adjustment: 120 mm Main spindle capacity: 11/15 kW electrics - voltage/frequency: 380/50 V/Hz total power requirement: 20 KVA

Condition: like new (used), Year of construction: 2022, operating hours: 850 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned and milled parts. Features integrated spindle motors and a water-cooled sub-spindle (preloaded roller guides) with Y-axis on both main and counter spindle. State-of-the-art SINUMERIK ONE control with ShopTurn dialogue programming. Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Turret: - 12-station VDI 30 radial tool turret with directional logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis travel: +/- 40 mm Includes hollow clamping cylinder with draw tube, C-axis on main and sub-spindle, Sinumerik ONE/OPERATE control, 22" multi-touch display, ShopTurn, 3D simulation, residual material detection, USB interface, electrical cabinet climate unit, reinforced coolant unit (24 bar), chuck flushing (additional pump 3.5 bar), part ejector and flushing through sub-spindle. Hydraulic unit, interface for chip conveyor, documentation and CE certificate. Control language: German/English Electronic handwheel EMCO tool breakage and wear monitoring/SINUMERIK ONE Alternating spindle speed Sub-spindle as tailstock: This cycle allows using the sub-spindle with mounted live center for workpiece support, enabling shaft part machining on machines without a tailstock by using the sub-spindle. Max. thrust force limited to 50% of max. axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for robot integration using HARTING connector, signal exchange via Profinet, safety signals two-channel/potential-free. Digitalization package for Sinumerik: Condition monitoring SIEMENS ONE INTERFACE for integration with MDE/BDE systems, standard with the following information: - Machine ON - AUX ON - Automatic operation - Production mode - active program - Program running and override between 95 and 105% - Part count impulse (M30) - Programmable impulse (M300) 3D machine data/MT65-G2: 3D data model of the machine included. Pneumatically operated finished part catcher for gentle unloading – parts are transferred into a catch box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 for connection of EMCO's SL1200 short bar loader. Nwodpfxjx E Dncj Amuoh Further options available… Machine is available immediately!

Condition: new, Year of construction: 2026, functionality: fully functional, turning length: 480 mm, turning diameter over cross slide: 300 mm, turning diameter: 300 mm, spindle motor power: 15,000 W, spindle speed (max.): 7,000 rpm, spindle bore: 45 mm, travel distance X-axis: 160 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 510 mm, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 45 m/min, rotational speed (max.): 6,000 rpm, feed rate Y-axis: 15 m/min, total height: 1,985 mm, total length: 2,680 mm, total width: 1,950 mm, bar diameter (max.): 45 mm, overall weight: 4,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, FANUC 31iT Plus CNC control iManual Guide 15" TFT Touch Screen 2 SAUTER turrets with 12 positions for radial VDI 25 driven tools Y-axis travel: +40/-30 mm Main and counter-spindle power: 15 Kw Main and counter-spindle nose: ASA 5" Bar capacity: 45 mm CE marking MACHINE COMPLETE WITH: - Chip conveyor - 2 high-pressure coolant pumps (14 bar) - Installation materials - Part washing gun - 3D machine model in .stp format - INDUSTRY 4.0 READY package - Part catcher for bar machining - Bar feeder interface - Machine status lamp - Tool load monitoring - MARPOSS tool pre-setter - 2 foot pedals for opening/closing the main and counter-spindle - 2 pumps for high-pressure coolant (24 bar) - Electrical cabinet air conditioner Nodpfx Amozcfb Djuowh

Condition: good (used), Year of construction: 2000, turning diameter 340 mm Njdpjvwgpbofx Amuswh turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders

Condition: used, Year of construction: 2003, control 840D-PCU 50 V1 3 Nwjdpfx Amoqn A Rrjush coolant ja chip conveyor ja kW generator - rated current 110 A connected load 56 kW

Condition: good (used), Year of construction: 2011, operating hours: 4,700 h, functionality: fully functional, machine/vehicle number: S6CZ1151, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 29,000 W, bar passage: 65 mm, Equipment: bar feeder, documentation/manual, Year: 2011 Nwodpfexwp I Aex Amujh Operating hours: 4,700 h (increasing) Turning diameter: 65 mm CNC type: Fanuc 18i-TB Number of turrets: 1 Axes: X, Y, Z, and C Number of turret stations: 12 Number of driven stations: 12 Main spindle and sub-spindle speed: 5,000 rpm Main and sub-spindle motor power: 29 kW Dimensions (L × W × H): 3,302.0 × 2,057.4 × 2,032.0 mm Weight: 5,700 kg Chip conveyor IEMCA MASTER 880r Verso bar feeder (3 m bar + loading magazine) Numerous fixed and driven tool holders included in the sale: _Axial driven tool holder: 3 _Radial driven tool holder: 4 _Swivel driven tool holder 0–90°: 2 _Fixed turning tool holder: 5 _Fixed drilling tool holder: 7 _Cut-off blade holder: 1 2 sets of chucks for jaw passage (main spindle and sub-spindle). The machine is currently in use but can be made available within 4 weeks. The machine is to be collected on site (Saint Pierre en Faucigny). Loading and transport costs are at the buyer’s expense.