Turning tool holder CNC 10 pieces

WNT-Mastertool C1-40x25

Condition: excellent (used), Grinding diameter: 400 mm Magnetic chuck: Ø 400 mm Grinding wheel: 200 x 80 x 78 mm Rsdjykkhljpfx Abbot 2 table speeds: 20/40 rpm Grinding wheel speed: max. 2850 rpm Max. distance between table and grinding wheel: 205 mm Distance between axes of grinding wheel and column: 315 mm Fine feed: 0.01 mm Grinding wheel motor power: 3 kW Magnetic chuck motor power: 0.33 / 0.48 kW Coolant pump motor power: 0.06 kW Dimensions (L x W x H): 1050 x 950 x 1750 mm Weight: 680 kg Equipment / Special features: • Grinding movement via manual pivot arm • Automatic feed • Rotating magnetic chuck, Ø 400 mm • Dressing diamond with table holder • New cup grinding wheel • Coolant system integrated in machine base • Fine and rapid feed via handwheel The machine comes from a training workshop and is in very well-maintained condition. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Straight bevel gear generator SARATOV 5C276P Max Module 10 Max. gear wheel diameter 500 mm Max. gear wheels cone distance 250 mm Max. gear ring width 80 mm Min. angle of dividing cone (pitch), degrees 5 Number of wheel teeth: 10 - 150 Distance between spindle and machine center, mm - max. (stock angle 5 degrees) 375 mm; - min. (stock angle 90 degree) 75 mm Stroke 100 mm Slider double stroke 48 - 400 spm Rodsuc T Hxopfx Abbjt Motor capacity 4 KW Machine dimensions 2885 x 2570 x 1995 mm Machine weight 8750 kg

Condition: used, Year of construction: 2001, REISHAUER - RZ 362A - 2001 - very good, running machine - standard accuracy TrQ.5 but also TrQ.4 possible, ..... but even TrQ.3 if wanted very-very much after adjusted settings - change gears - books - oil filtering unit - used condition as shown on photos - under power, can be tested - dimensions of machine L2700 x W2260 x H2400 mm - 5500 kg + electric cabinet L3600 x W600 x H2400 mm + oil filter L2000 x W1500 x H2000 + hydraulics L1100 x W800 x H2000 Rjdpfx Aboyl Simebst + change gears box, small

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 200 mm gear width: 50 mm max. module: 6 table diameter: 168,14 mm Rjdpfxexz Avbe Abbot boring diameter: 65,532 mm weight of the machine ca.: 11 t table turning speeds: 0-1.000 U/min length of stroke min./max.: 0-70 mm no. of strokes: 180-1.800 Stück This machine can be used to make tandler gears. However, for helical gearing, a helical guide is also required. *

Condition: used, Year of construction: 1972, Technical details: grinding wheel diameter: 400 mm total power requirement: 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1,5 x 1,4 x 1,3 m Dressing Grinder for gears REISHAUER AM max. width of grinding wheel 104 mm max. dia. of grinding wheel 400 mm max. module 7 min. module 0,5 pressure angle 10 - 30 ° grinding worm dia. 270 - 400 mm width of grinding worm 62/84/104 mm grinding worm turning speeds: at profiling 18/35/70 U/min electrics - voltage/frequency 380 / 50 V/Hz long. movement of crowning device 156 mm * Rsdpfx Aswi Ni Tjbbjt

Year of construction: 2005, condition: excellent (used), driven tool with collet chuck make Benz1114 DA 003 00 E64,1 kg Redpfx Aod Th Euebbjt

Condition: ready for operation (used), Year of construction: 2005, A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible. Redpjxltu Njfx Abbjt

Condition: used, The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies for noise and contact pattern testing on bevel and hypoid gears. Technical Data • Diameter: 540 (400) mm • Hypoid: ±50 mm • Pinion spindle diameter: 90 mm Rodpfx Abexpq Nlsbjt • Dimensions (LxWxH): 1,800 x 1,800 x 1,600 mm • Machine weight: approx. 2,800 kg *Information and data are provided without obligation. Subject to prior sale. Special Features: The machine is intended for noise and contact pattern testing on bevel and hypoid gears of all gear types. By simulating operational conditions, applying various rotational speeds, and switching load states between drive and coast, the optimal installation distance for standstill can be determined. • Digital actual value display for 2 axes • Infinitely variable speed adjustment via frequency inverter • Electrically secured and removable safety guard • Accessories: Large number of workpiece holders • Condition: Very good

Condition: used, Technical details: max. wheel diameter: 600 mm max. module: 6 Rsdpfsya Rhkjx Abbet weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,52 x 0,91 x 1,45 m

Condition: ready for operation (used), Year of construction: 1980, machine/vehicle number: 134B, functionality: fully functional, operating hours: 15 h, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding height: 270 mm, height adjustment type: mechanical, total height: 1,900 mm, total length: 3,450 mm, total width: 1,513 mm, overall weight: 4,900 kg, travel distance X-axis: 1,120 mm, travel distance Z-axis: 190 mm, grinding length: 850 mm, workpiece weight (max.): 80 kg, disc diameter: 125 mm, distance stand to spindle center: 362 mm, distance table to spindle center: 180 mm, feed length X-axis: 1,120 mm, feed length Z-axis: 190 mm, feed rate X-axis: 15 m/min, grinding spindle speed: 7,400 rpm, grinding wheel diameter: 125 mm, grinding wheel width: 16 mm, grinding width: 320 mm, pivoting range: 369 °, rotational speed (max.): 7,400 rpm, rotational speed (min.): 2,880 rpm, spindle speed (max.): 7,400 rpm, spindle speed (min.): 2,880 rpm, table length: 1,000 mm, table width: 250 mm, tank capacity: 127 l, working range: 850 mm, Spline Grinding Machine MSZ 3451Б (Profile grinding machine for splined shafts) The MSZ 3451Б is a specialized spline grinding machine designed for precision grinding of external splines and profiled shafts. Manufactured by МСЗ (Moscow Machine Tool Plant), this machine is intended for industrial applications requiring accurate profile grinding and reliable repeatability. The machine is suitable for workpieces with a maximum length of 1000 mm, while the maximum grinding length is 850 mm. It supports workpieces with a maximum diameter of 320 mm and a maximum weight of 80 kg, making it ideal for medium-sized splined shafts. The machine allows grinding of parts with 3 to 48 splines, covering a wide range of spline configurations. The grinding spindle is designed for grinding wheels with diameters from 25 to 125 mm and a maximum wheel width of 16 mm. The spindle operates at stepped speeds of 2880 / 4550 / 6300 / 7400 rpm, driven by a total installed power of 4 kW. The permissible grinding wheel speed corresponds to the selected spindle speed and wheel diameter, ensuring safe operation. The machine features a rigid worktable with a length of 1000 mm and a width of 250 mm, with a travel distance along the X-axis from 200 to 1120 mm and a Z-axis travel of 190 mm. Height adjustment is performed via a mechanical system, providing precise and stable positioning during grinding operations. With overall dimensions of approximately 1513 × 3450 × 1900 mm and a machine weight of about 4900 kg, the MSZ 3451Б offers excellent stability and vibration damping. The machine operates on three-phase power (3 × 400 V, 50 Hz) and is supplied with factory documentation, facilitating operation, setup, and maintenance. Key Features: *Specialized spline grinding machine *Maximum workpiece length: 1000 mm Rsdjx S Hc Njpfx Abbjt *Grinding length up to 850 mm *Maximum workpiece diameter: 320 mm *Workpiece weight up to 80 kg *Number of splines: 3–48 *Grinding wheel diameter: 25–125 mm *Grinding wheel width: max. 16 mm *Spindle speeds: 2880 / 4550 / 6300 / 7400 rpm *Total installed power: 4 kW *Mechanical height adjustment *Rigid industrial construction (~4900 kg) Typical Applications: *Grinding of external splines *Profile grinding of splined shafts *Precision machining in machine-building industries *Repair and refurbishment of transmission components *Small- and medium-series production of splined parts