Moulder

WEINIG UNIMAT 30 EL

Condition: good (used), Shrink tunnel from a German manufacturer: -Tunnel opening approximately 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m / min. Ndodsh U A I Rspfx Af Ssf -Choice of fixed or co-rotating tunnel bars. -By means of deflectors, the hot air streams at the top and in the middle can be adjusted separately. -Bottom air can be switched on separately. -The machine can be pushed or fixed in place by means of lockable castors.

Condition: like new (used), Weinig Hydromat H22N four-side planer - German production - DTR - year of production 1992 - two rollers in the tabletop, milled before the first head - for wet wood TECHNICAL PARAMETERS: - planing width 220 mm - planing height 140 mm - spindle diameter 50 mm 1 lower head 7.5 kW 2 legal head 7.5 kW 3 left head 11 kW 4 upper head 7.5 kW 5 lower head 11 kW hydraulic feed pump motor power 15 kW feed speed smoothly adjustable up to 60 m/min feed on cardan shafts electric height adjustment pneumatic pressure five pulling rollers in the countertop eight steel upper pulling rollers one upper rubber pulling roller rests on horizontal spindles jointer on the lower spindles Ndsdpepvi Skefx Af Sef Transport dimensions 500x200x160 cm weight 4 tons

Condition: ready for operation (used), Technical characteristics Affûteuse WEINIG RONDOMAT 950 Sharpening and manufacturing of profiled irons from raw irons Max. grinding wheel diameter : 225 mm Quick clamping Widths : 2 ; 3 ; 4 ; 10 mm Bore 60 mm 4 rotation speeds : 1500, 1700, 2400 and 3000 RPM Clearance angle : 15° to 35 Cross-bearing table Tool holder Cutting diameter : 100 to 230 mm Tool width : 240 mm Copying device with constant axial system Système de mesure OPTICONTROL Flying circle diameter : 0 to 300 mm Tool length : 0 to 330 mm Shaft diameter 40 mm Electronic digital display of tool radius and height Projector for optical data acquisition Measurement and display system for optical tool measurement Nsdpfx Afet D Su Sj Sedf Checks correct positioning of cutters on heads Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions

Year of construction: 2002, condition: ready for operation (used), Nominal voltage: 400V, connected load: 3kW, with roller conveyor, an inspection is possible. Njdpfxjnucnuj Af Sjdf

Year of construction: 2006, condition: ready for operation (used), Controls: SIEMENS SIMATIC OP7, operational hours counter: ca. 1700h. Ndsdpoin E Tasfx Af Ssf

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Weinig Rondamat 960 Tool Grinder Year of Manufacture: 2001 Technical Condition: Very good Description: The Weinig Rondamat 960 is a high-quality tool grinder designed for the professional sharpening of tools used in four-sided moulders and other woodworking machines. It enables fast, precise, and repeatable sharpening of various knife profiles and shapes. --- Nedpfx Ajwanrnef Sodf Technical Specifications: - Grinding wheel diameter: up to 300 mm - Spindle diameter: 40 mm (standard) - Sharpening angle range: from -5° to +35° - Main drive motor power: approx. 2.2 kW - Cooling system: liquid cooling system (standard) - Approximate machine dimensions: - Length: 1400 mm - Width: 1000 mm - Height: 1600 mm - Weight: approximately 700 kg --- Machine Features: Sharpening of straight and profiled knives Easy operation and quick setup Stable and rigid construction for the highest sharpening precision Cooling system ensures longer tool life Possibility to use various tool holders and clamping systems