Sharpening machine and measuring system

WEINIG RONDOMAT 950 OPTICONTROL 970

Condition: good (used), Shrink tunnel from a German manufacturer: Knedpfxjh U A I Rj Af Ssf -Tunnel opening approximately 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m / min. -Choice of fixed or co-rotating tunnel bars. -By means of deflectors, the hot air streams at the top and in the middle can be adjusted separately. -Bottom air can be switched on separately. -The machine can be pushed or fixed in place by means of lockable castors.

Condition: excellent (used), Catalogue number 6338 TECHNICAL DATA - Maximum working width: 230 mm - Maximum working height: 160 mm 7 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 230 mm, 7.5 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 7.5 kW 7) Universal 360°, 230 mm, 7.5 kW - All spindles adjustable up/down and right/left - Spindle diameter: 40 mm - All spindles equipped with brake - Spindle speed: 6,000 rpm From above: - 6 geared, steel infeed rollers including 2 double rollers - 4 rubber outfeed rollers including 1 double roller - 3 outfeed pressure rollers From below: - Side pressure roller at infeed - Geared, swiveling, steel infeed roller in lower table - 3 smooth steel feed rollers - Pneumatically adjustable rollers - Length of infeed table: 1,190 mm - Centralized table lubrication - Electric planer thickness adjustment - Lifting motor: 0.56 kW - Stepless feed rate adjustment via inverter: 6–24 m/min - Feed motor: 3.7 kW - Cardan shaft roller feed - Enclosed in cabin - Extraction port diameter: 7 x 125 mm - Dimensions (L x W x H): 5,100 x 2,070 x 1,900 mm Knjdpfohp N R Iex Af Sef - Approximate weight: 5,000 kg ADVANTAGES - 7 heads - Universal spindle - Ideal for both wet and dry wood - Spindles equipped with brakes - Full technical documentation (DTR) - Used planer, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR at an exchange rate of 4.2 EUR (Prices may vary with larger fluctuations)

Condition: like new (used), Weinig Hydromat H22N four-side planer - German production - DTR - year of production 1992 - two rollers in the tabletop, milled before the first head - for wet wood TECHNICAL PARAMETERS: - planing width 220 mm - planing height 140 mm - spindle diameter 50 mm 1 lower head 7.5 kW 2 legal head 7.5 kW 3 left head 11 kW 4 upper head 7.5 kW 5 lower head 11 kW hydraulic feed pump motor power 15 kW feed speed smoothly adjustable up to 60 m/min feed on cardan shafts electric height adjustment pneumatic pressure five pulling rollers in the countertop eight steel upper pulling rollers one upper rubber pulling roller Kodpfxspvi Sko Af Senf rests on horizontal spindles jointer on the lower spindles Transport dimensions 500x200x160 cm weight 4 tons

Condition: ready for operation (used), Technical characteristics Working width : 20 to 300 mm Working height : 8 to 120 mm Feeding speed 6 to 46 m/min Heavy drive (15 kW) 9 shafts Superior soundproof option Composition : Lower spindle 11 kW, diameter 50 mm Right-hand spindle 11 kW, diameter 40 mm Left-hand spindle 11 kW, diameter 40 mm Upper shaft 11 kW, diameter 50 mm Lower shaft 11 kW, diameter 50 mm Knedpfx Ajr Av T Hsf Sjf Upper shaft 11 kW, diameter 50 mm Lower shaft 11 kW, diameter 50 mm Upper shaft 11 kW, diameter 50 mm Lower shaft 11 kW, diameter 50 mm Machine sold with input mechanization : chain transfer 6000 x 2500 mm Special configuration, ideal for parquet and deck boards Power and Motors Voltage: 400 V Pluging: Three-phased Power: 114 Kw Motor: 9 x 15 CV Overall dimensions Lenght: 5200 mm Width: 2200 mm Height: 1800 mm

Year of construction: 2002, condition: ready for operation (used), Nominal voltage: 400V, connected load: 3kW, with roller conveyor, an inspection is possible. Kjdonucnuspfx Af Sonf

Year of construction: 2006, condition: ready for operation (used), Controls: SIEMENS SIMATIC OP7, operational hours counter: ca. 1700h. Kedsin E Taopfx Af Ssnf

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Weinig Rondamat 960 Tool Grinder Year of Manufacture: 2001 Technical Condition: Very good Kodpfjwanrnox Af Sonf Description: The Weinig Rondamat 960 is a high-quality tool grinder designed for the professional sharpening of tools used in four-sided moulders and other woodworking machines. It enables fast, precise, and repeatable sharpening of various knife profiles and shapes. --- Technical Specifications: - Grinding wheel diameter: up to 300 mm - Spindle diameter: 40 mm (standard) - Sharpening angle range: from -5° to +35° - Main drive motor power: approx. 2.2 kW - Cooling system: liquid cooling system (standard) - Approximate machine dimensions: - Length: 1400 mm - Width: 1000 mm - Height: 1600 mm - Weight: approximately 700 kg --- Machine Features: Sharpening of straight and profiled knives Easy operation and quick setup Stable and rigid construction for the highest sharpening precision Cooling system ensures longer tool life Possibility to use various tool holders and clamping systems