Pillar Drilling Machine

WEBO 296/5B16

Condition: good (used), Year of construction: 1970, Ref. -No.: 10575 Manufacturer: VDF BOEHRINGER Fodexmd Uvjpfx Ahdjpn Type: T 11 Year of construction: 1970 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 40XXX Turning Diameter: Ø 700 mm Turning Length: 3000 mm Spindle Diameter: Ø 750 mm Spindle Bore: 70 mm Swing diameter over cross slide: Ø 450 mm

Condition: used, Year of construction: 1982, Center height: 220 mm Center width: 1250/1300 mm Swing diameter: over bed 440 mm Spindle bore: Spindle mount: Fodpfx Ahevzn Itodspn Tailstock taper: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/transverse 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space required: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg

Condition: used, Year of construction: 1969, turning diameter over bed 500-600 mm turning length 2800 mm bore diameter 130 mm Fpedpfx Ajvdx I Aohden weight of the machine ca. 5,25 t required space / m

Condition: used, Year of construction: 1967, Center height: 300 mm Center width: 1000 mm Swing diameter: over bed 610 mm Spindle bore: 71 mm Spindle mount: size 8 Fodpfx Ahjvzn E Ssdjpn Tailstock taper: 5 MK Spindle speeds: approx. 11.2 - 1800 rpm Feeds: longitudinal/transverse 0.014-16/0.063-7 mm/rev Thread pitches: 0.1 - 112 mm Electrical connection: 380 V, approx. 5.5 kW Space required: 2900 x 1450 x 1750 mm

Condition: ready for operation (used), Year of construction: 1996, LZ lathe, make SASTA STANKO, type: SA562M, year of manufacture 1996 Swing diameter above bed: 500 mm Swing diameter above plan support: 290 mm Tent length: 1500 mm Spindle speeds: 16 2000 rpm Spindle bore: 55 mm Chuck diameter 250 mm Forkardt tool holder Multifix size C. Machine with rapid traverse X and Z axis Good general condition. Fodsvkuaujpfx Ahdopn For further information see data sheets.

Condition: excellent (used), turning diameter over cross slide: 580 mm, spindle bore: 84 mm, turning diameter: 870 mm, turning diameter over bed slide: 870 mm, Geminis lathe model GE 870 with 4000mm between centers, swing over bed 870mm, swing over cross slide 580mm, swing over gap 1100mm, gap length 340mm, speeds from 13-1000rpm, spindle bore diameter 84mm, equipped with a 3-jaw chuck diameter 315mm, independent 4-jaw chuck diameter 800mm, fixed steady rest, the lathe is generally in very good condition. Fjdpfx Ahey Swmredspn

Condition: used, Year of construction: 1967, turning diameter over bed 0560 mm turning diameter over slide rest 300 mm turning length 1500 mm spindle bore 65 mm Fpjdpfx Asw H Di Aehdjn spindle turning speed range 12- 1150 U/min total power requirement 5 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,6 x 1,6 m With multifix holder, chuck and turning center.

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: X1T132/23, turning diameter over cross slide: 350 mm, turning length: 650 mm, turning diameter: 350 mm, spindle bore: 42 mm, WOHLENBERG V 1000 Lead and Feed Screw Lathe (Universal Lathe) 3000 mm, year 1985 3-axis digital readout from Heidenhain Feed on top slide Fedpfx Aeylbldohdepn Coolant system Swing over bed: 1000 mm Swing over cross slide: 760 mm Turning length: 3000 mm Spindle speeds: 4.5 - 900 rpm Centre height over flat bed: 500 mm Workpiece weight between centers: max. 5000 kg Workpiece weight in steady rests: max. 7100 kg Bed width: 560 mm Spindle bore: 104 mm Voltage/Frequency: 380/50 V/Hz Total power requirement: 32 kW Dimensions: 5520 mm x 2200 mm x 1775 mm Machine weight approx. 9 t Control: conventional

Condition: used, Year of construction: 1989, centre distance 2000 mm Fpedpfx Asyi Hvvehden 600 weight of the machine ca. 3,2 t Passage 49 mm Digital Lynette

Year of construction: 1985, condition: good (used), Offer 22428 Technical data: - Drilling capacity in steel ST 60: 18 mm - Drill spindle mounting: MK 2 - Drill spindle stroke: 120 mm - 10 drill spindle speeds: 90 - 1450 rpm - Overhang: 280 mm Fpsdpfx Ahoimbmcoden - Table with 2 T-slots: 350 x 400 mm - Max. distance table - drill spindle: 410 mm - Drilling machine with height adjustment via rack and pinion with hand crank - Lighting - Drive: 400 V / 1.5 kW - Table base - Space requirement: approx. W 500 x H 2000 x D 850 mm - Weight: approx. 350 kg - Includes: - Machine vise - Quick-change drill chuck - 10 pcs. HSS drill bits 8 - 20 mm