Mandrel tube bending machine

Transfluid DB 40100ST

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec Gedoxcuicspfx Agrjub total power requirement 2,4 kW weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Condition: repair required (used), functionality: not functional, Year of construction: 2004, CNC Tube Bending Machine Manufacturer: Schwarze-Robitec Model: CNC 80 E-MR Gujdsxzubvspfx Agrsb Year of manufacture: 2004/2006 Condition: Needs repair CNC: PC control Beckhoff Technical Specifications: - Maximum tube diameter x wall thickness: 80 mm x 3 mm - Minimum tube outside diameter: 16 mm - Minimum bending radius (to tube centre): 25 mm - Maximum bending radius (to tube centre): 240 + 50 mm - Maximum bending angle: 180° - Maximum tube lift length: 1000 mm - Bending direction: right - Machine weight: 7000 kg - Total installed power: 39 kW - Voltage: 400 V / 50 Hz - Amperage: 100 A - Machine dimensions (L x W x H): 6.2 x 3.2 x 2 m Equipment / Accessories: - Hydraulic pressure and feed for slide rails - Automatic tube feed and rotation device - Electric mandrel bending device - Pneumatic mandrel rod safety device - PC control Beckhoff - Automatic central block lubrication - Laser scanner, safety guard Machine requires repair: The planetary gearbox of the transport trolley is defective and must be replaced. Spare parts costs according to offer: planetary gearbox €1,674 + gearbox flange €1,850 + pinion €850 + VAT Without installation. Cheap sale in current condition – sale as is. Immediately available, free loading onto truck included.

Condition: good (used), Year of construction: 1997, functionality: fully functional, oil tank capacity: 220 l, pressure: 300 bar, ID43737 Year: 1991-1997 Press machines with capacities from 60 tons to 80 tons Brand: Hydro-Presses Gusdpfxjwhcmpo Agrjb 2 units with 60 ton force PH600 Hydraulic cylinder stroke: 600 mm Maximum hydraulic cylinder force: 60 tonnes at 300 bar 5 units with 80 ton force PH800 Hydraulic cylinder stroke: 600 mm Maximum hydraulic cylinder force: 80 tonnes at 300 bar

Condition: used, functionality: fully functional, YEAR 1990 Gujdpfx Ageummkaereb Power rating 15 kW Shaft diameter ø 120 mm Roller diameter ø 400 mm Resistive moment Cm 333 Cm3 IPN capacity 240 x 106 mm Capacity HEB 120 x 114 mm Capacity Pipe wall thickness x Ø 139 x 5 mm Capacity flat 125 x 25 mm Hydraulic / Mechanical Hydraulic

Condition: used, Bending capacity: Ø45 mm Bending angle: 0 - 180° Revolver-adjustment: 8-fold adjustable angles Mandrellength: 4000 mm Sets of bendingdies: 1x Ø 16 mm 2x Ø 17 mm Guedpfjq Nipyex Agrjb 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Featured with: - 4 Mandrels - Mandrel retraction unit Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Condition: ready for operation (used), Max. air supply: 5bar, operational temperature: -10 to 50°C, max. connected load: 200W, with documentation. Godpfxeiu H Itj Agrjub

Condition: new, Cesurbend Mandrel Tube Bending Machine / Pipe Bending Machine PBNC-51 Technical Specifications Max. Tube Diameter: 51 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Rate (rpm): 7-10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Tube Length (mm): 3000 Bending Motor Power (kW): 5.5 Hydraulic Motor Power (kW): 3 Machine Width (mm): 1400 Machine Length (mm): 4215 Machine Height (mm): 1450 Machine Weight (kg): 1600 Features Gedpext Rc Tofx Agrsub • In this process, the jaw clamps the tube after it is inserted into the machine. The tube is bent over the die to half its diameter. When using a mandrel and wiper, better results are achieved for bends requiring higher quality, with thinner wall thickness and smaller radii. • This is a three-piston machine with a hydraulic spool located behind the hydraulic boom.

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool Gedpfx Agsf Nrp Tereub -Pipe bending tool: 2 pieces -Profile diameter: 65/49 mm -Recording: dimensions see photos -Price: complete -Dimensions: 195/400/H220 mm -Weight: 42.7 kg

Year of construction: 2006, condition: good (used), Welding fume extractor,dust collector,self-cleaning filter,pneumatic,vacuum RITTER brand. For welding, grinding, sandblasting and all kinds of dry dust. Cartridge filter in good condition. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. Guodpohyg Ivefx Agrsb The device for continuous operation Fan in sound absorbing housing with power 2,2 Kw Capacity 1200 m3/h Filtration surface 10 m2 Additionally equipped with automatic spark detection and extinguishing system. The spreading of sparks is usually caused by the operation of production machinery or material contamination. The result is downtime and loss of business, and often a serious threat to human life. Therefore, in order to eliminate such risks, pneumatic and mechanical conveyor systems must be monitored for sparks and protected by spark extinguishing systems.

Condition: used, Year of construction: 1988, gebraucht 1988 090151 prompt, Zwischenverkauf v Italien 12800 € 1 42 mm 4665 mm 800 mm 1160 mm 1470 kg 42 x 2,5 mm 40 x 1,2 mm 30 x 40 x 1,7 mm 40 x 30 x 1,3 mm 255 mm 22 mm 180 ° 90 °/s 5,5 kW 120 l Gjdsxx A Ekspfx Agrsub Capacity specifications refer to 400 N/mm² Maximum bending radius with pipe guide rollers: 255 mm Maximum bending radius with pipe guide slide: 175 mm Minimum bending angle: 4° Maximum usable length without positioning device: 3900 mm Maximum usable length with positioning device: 3370 mm Adjustable mandrel extension travel from 8 mm Opening and closing travel of the counter-clamping jaws: 0-45 mm Opening and closing travel of the rollers or slides: 12-22-42 mm Operating manual in German Machine does not comply with AMVO or UVV regulations Tools not included