Honing machine

Sunnen

Condition: excellent (used), honing diameter 1,5 - 165 mm stroke 80 - 160 mm spindle turning speed range 200 - 2500 U/min stroke speed - under load 80 - 310 Hub/min total power requirement 0,9 kW Ncsdpfxjwva Rnj Ah Ner weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 1,0 x 1,6 m

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm - control panel Nsdsu Ngybjpfx Ah Njcr i.D. *

Condition: ready for operation (used), Year of construction: 2007, A vertical cross grinding machine Sunnen is available. Bore diameter range: 3mm-65mm, max. workpiece length: 250mm, working area dimensions X/Y/Z: 150mm/150mm/150mm, slide speed range: 0.001mm-0.8mm/s, stroke rate range: 30-400, spindle speed: 4000rpm, feed force: 3800N, grinding oil tank volume: 280l. Machine dimensions X/Y/Z: approx. 2150mm/2200mm/2900mm, weight: approx. 2200kg, operating hours: approx. 5000h. Including indexing table and grinding oil tank with magnetic separator and filter. Documentation available. An on-site inspection is possible. Nodpfx Aoy Ax Tnsh Necr

Condition: used, SUNNEN ML2000 Honing Diameter Range: - Manual Stroking: 1.5 mm to 165 mm - Power Stroking: 1.5 mm to 102 mm Spindle Speed: - Infinitely variable from 200 to 3,000 RPM Stroke Rate: Ncedsyf N Adopfx Ah Ner - 60 to 350 strokes per minute Automatic Sizing Range: - 3 mm to 51 mm Oil Tank Capacity: - 106 liters Pneumatic Requirements: - 5.5 bar Machine Dimensions: - Length: 1,600 mm - Width: 1,220 mm - Height: 1,900 mm Weight: - Approximately 725 kg

Condition: refurbished (used), Honing machine SUNNEN ML3500 (like ml5000 ml2000 ec3500 ml 5000 ml 2000) this machine is currently under complete electronic retrofit (Siemens) Ncjdsw Npt Ropfx Ah Nor Touch screen. Loader interface possible

Condition: used, Sunnen 1804 Honing machine, manual very good mech condition The machine can be seen working in our warehouse in Gussago BS. Test run possible Mimu Machine Tools Honing dia (min-max): 1.5-120 Honing length (max): 250 Njdpfxswpw A Ij Ah Njcr

Condition: refurbished (used), Honing machine SUNNEN EC3500 (like ml3500 ml5000 ml2000) SOLD - contact us for alternatives e.g. ML3500 o ML2000 complete electronic retrofit (Siemens / Telemecanique) Touch screen. Loader interface possible Ncedpfxsphvk Ie Ah Njr

Condition: used, Year of construction: 1999, functionality: fully functional, workpiece weight (max.): 5,000 kg, spindle speed (max.): 2,987 rpm, total width: 3,000 mm, total length: 36,000 mm, space requirement height: 2,500 mm, space requirement length: 37,000 mm, space requirement width: 3,000 mm, We are offering this used Sunnen HTC 16000 honing machine, year of manufacture 1999. It can also be adapted for 6m lengths... Manufacturer: Sunnen HTC 16000 Model: HTC 16000 Year of manufacture: 1999 Condition: used Category ID: 222 Type ID: 2524 Machine type: honing machine Ncedpeyx Hazefx Ah Ner • Max. stroke: 12,000 mm • Current working length for tubes: 17,200 mm (divisible into 6 m sections) • Spindle speed (idle): 2,987 rpm • Rated power: 5,500 Watts • Internal diameter range: Ø23.2 mm to Ø205.00 mm • Clamping fixture: prism/chain • Max. workpiece weight (internally used): approx. 5 tons If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2004, functionality: fully functional, Well used Sunnen honing machine with Felsomat loading system. Diameter range (INSIDE Ø)¹: Krossgrinding® tools: 5.46 to 32 mm when loaded with CGT tools TurboHone® tools: 3.81 to 32 mm when loaded with MMT tools Connecting rod tools: 53.8 to 63.8 mm when fitted with CRT tools Larger tools: 25.4 to 101.6 mm Workpiece²: 8 to 150 mm Max. Workpiece weight: 2.0 kg Spindle speed range: 250 to 3,700 rpm, adjustable Standard speed: High torque in the low speed range: 20 to 1,000 rpm, adjustable Stroke speed range: 33 to 500 H/min, adjustable Coolant system Pump motor: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l and 11.2 l/min Coolant requirements: Compressed air requirements: 566 l/min at 4.48 bar, 5.52 bar is recommended Temperature range: 0° to 35° C Floor space requirements: Ncedpfeud Nm Rex Ah Nsr (concrete floor) At least 150 mm thick Machine dimensions: L 2946 mm x W 2971 x H 1829 Color: Pearl grey with pewter grey and burgundy decorative stripes Stand weight: 1,579 kg Noise emissions: < 71 dB (A) continuous load, < 75 dB (A) peak load Special features: Automatic set-up: spindle speed, stroke speed, stroke length, infeed value and sparking Automatic finishing: Standard Machine operating modes Automatic: Manual: Series production Individual production Clamping optional

Condition: not inspected (used), Year of construction: 1996, empty load weight: 800 kg, Diameter 1.5 - 160 mm Stroke 400 mm Weight 800 kg Tools Nsdpewgm Sajfx Ah Necr

Condition: used, functionality: fully functional, Sunnen MBB-1660G Precision Honing Machine. Make - Sunnen Model - MBB-1660 Job Diameter Range - 1.5 mm to 165 mm Max. Job Length - 406 mm Ncsdpfx Aov Sd Nhoh Nsr Max. Spindle Speed - 2500 rpm Machine suitable for any material, regular or odd-shaped parts. Good working condition. Please check out our other listings as well.