Band saw

Stenner VHM36

Condition: refurbished (used), saw band length: 6,980 mm, saw band width: 100 mm, total height: 2,200 mm, total length: 90 mm, total width: 80 mm, table height: 82 mm, working height: 82 mm, roll diameter: 200 mm, height adjustment type: mechanical, space requirement height: 2,200 mm, power: 18 kW (24.47 HP), saw blade length: 6,980 mm, Wheel diameter: 915 mm, Blade width: max. 100 mm, Max. roller blade opening: 230 mm, Feed unit Motor: 18 kW, Bcjdoxy Id Iopfx Af Sot Variable speed from 10 to 45 m/min, Cutting angle: 0-45°, Requires a small pit

Condition: new, Main features of the machine: The TOP CUT 500 bandsaw offers high quality features and great opportunities, especially for companies, woodworking on various scales. The machine provides unparalleled stability and solidity. -touch panel with electronic display of cutting height -Control panel on the front of the machine for easy and convenient operation - electronically controlled and programmed cutting thickness - cutting unit lifted on two motorized pistons - feeding and return belt driven by a hydraulic variator -hydraulic cutting band tensioning system -pneumatic lubrication of the cutting band -Pneumatic system of pressure rollers ensures the accuracy of guidance -stable, steel construction of the machine guarantees precise work -accuracy and repeatability of cutting up to 0.01 cm Technical data: Bcodjiim Tqopfx Af Sjt Maximum dimensions of the workpiece: 520x300 mm Transport belt width: 495 mm Transport belt length: 5535 mm Max cutting height: 300 mm Minimum element height: 5 mm Saw band diameter: 711 mm Saw wheel width: 45 mm Extraction port diameter: 100 mm Feed speed: 0 - 13 m / min Saw dimensions: 5200 x 35-55 x 1.6 mm Voltage: 380V Main engine power: 18.5 kW Total power: 21.5 kW Weight: 2400 kg Dimensions: 2800x2400x2000 mm

Condition: good (used), Reasaw Stenner Type:Stenner VHM 36 Saw line including lifting tables ,infeeding conveyor, reasaw Stenner 36,outfeeding conveyor 7m Toatal lengt approx. 12 m Tech. info: Reasaw Stenner Bandsaw wheel 36´(900mm) Saw blade width 75, 90, 100mm Fence to saw blade 250mm Feed roll to saw blade 250mm Max cutting hight 400mm Motor 15 Hp, 400 volt, 50 Hz, 3 phase Hydraulic lifting table: Brand: Hymo Bcsdpfx Ajqzh Nwjf Sjt Capacity: 4000 kg Work table size: 3500x1400 mm Hydraulic lifting table size:1200x900mm Input conveyor: Length: 4200 mm Width of roller: 500 mm Outfeed belt conveyor 8000mm Stock no:2001941BXM

Year of construction: 1997, condition: excellent (used), A used very good condition cold circular saw from EISELE equipped with 370mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant device and documentation. Bcsdpfskfp D Tsx Af Set Speed: 17/ 34 rpm Cutting range: Round 90°/ 45° r. l./ 30° r. 130/ 130/ 105mm. square 90°/ 45° r. l./ 30° r. 120x120/ 100x100/ 90x90mm rectangle 90°/ 45° r. li/ 30° r. 200x100/ 140x100/ 100/100mm Pneumatic connection 7 bar working height 900mm Machine dimensions WxDxH 865x1332x2175mm Weight 460kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to Bcjdpfjvuhumex Af Set the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: used, Year of construction: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of construction: 2001 Commission no.: 0682-10 Rotary current: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Bcsdpfx Ajwtgcxef Sst Nominal output: 11 kW Fuse protection: 25 A Condition: used

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: SKKYTT 1500, Automatic skate nailing line Bcjdpfxsvgqlrj Af Sjt Automatic heel cutter Skate nailer Skate stacker

Condition: like new (used), Year of construction: 2004, HYDRAULIC PRESS FOR GLUING WOODEN ELEMENTS TO THE THICKNESS OF HSKG Category: VI - Hydraulic presses for gluing wooden parts. The HSKG device is used for gluing wooden cut-thickness parts under high pressure of hydraulic cylinders. The range of achievable crushing forces per cylinder is 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is carried out in a stack with the dimensions of the loading field. Stack forming is carried out by hydraulic compression between the sliding vertical beams and the vertical slats of the transverse cylinders. Both stack forming elements are equipped with wooden or metal inserts corresponding to the profile of the slat stack. Bcjdetrl R Aopfx Af Sjt Gluing wooden elements from the thickness improves the quality of the frames, reduces the cost of machining, reduces the amount of wood waste. Technical and operational data ( of standard execution HSKG - 6m ) Number of loading fields pcs 4 Dimensions of a single loading field - loading height - length of slats in one field mm mm 1140 1530 Maximum width of slats mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electricity supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of actuators on one field: mm mm O 50x100 - 3 pcs. O 80x100 - 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Weight of the device kg 4800 At the request of the customer, we also make other configurations of pressure actuators control depending on the expected length of glued elements, as well as other lengths of individual working fields in different quantities in the whole press set, and working width of up to 220 mm maximum with increased pressure force.

Condition: new, Year of construction: 2025, operating hours: 2 h, functionality: fully functional, working width: 400 mm, brushing unit diameter: 210 mm, total length: 1,350 mm, total width: 900 mm, total height: 1,540 mm, height adjustment type: mechanical, overall weight: 500 kg, extraction nozzle diameter: 100 mm, workpiece height (max.): 315 mm, workpiece width (max.): 400 mm, Aging and brushing machine VALMEC Master 400 Specification: • Condition – new • Manufacturer – VAL.MEC • Model – Master 400 • Working width – 400 mm • Max working height – 315 mm • Brush diameter – 210 mm • First brush – steel • Second brush – tynex • Motor power – 2 x 3.0 kW + feed 0.37 kW • Motor startup – 0-1 • Conveyor speed steplessly adjustable via inverter, range 4–12 m/min • Rear brush rotation direction reversible • Independently adjustable height for each unit • Dust extraction outlet – 100 mm diameter • Weight – 500 kg • Complete documentation from the manufacturer • Overall dimensions 135 x 90 x 154 cm (L x W x H) Additional information: • Machine is brand new, in factory condition • The pictures shown accurately represent the actual condition of the item for sale • Machine available within 7 business days Bcsdsuwdb Eopfx Af Sjt

Condition: reconditioned (used), functionality: fully functional, Milling motor dimter Bsdpsm Sgvzefx Af Sjct for finger joint milling machine HK200 and HK400 50 kW