Edge banding machine with operator return

SCM OLIMPIC K800

Ideal machine for edge banding of solid wood panels

MACHINING CAPABILITIES:
- Panel height (thickness) to be machined: 8 to 60 mm
- Router pass: max. 90mm², 0 to 3 mm
- Minimum panel length to be machined:
140 mm with an edge thickness >3 mm
200 mm with an edge thickness between 3 and 12 mm
- Panel width to be machined: up to 2000 mm
- Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form
Panel overhang relative to the chain (part protrusion): min. 30 mm
- Edge width: recommended overhang: panel thickness + 4 mm
- Feed system (2 feed speeds)
18 m/min for thin edges
12 m/min for strip edges (solid wood)
- Distance between parts (depending on feed speed): recommended min. 800 mm
MACHINE COMPOSITION:
- Unwinding table, useful diameter: Ø780 mm
- Electric positioning infeed guide
- Chain conveyor belt, work surface height from the ground: 96 cm
- Front extension table with rollers (serves as a support up to 2 m)
- RT-E sanding unit (edge trimmers or routers)
2 x 4 kW, 9000 rpm
- VC gluing unit
Infrared preheating of the edge
Pre-feeder for EVA granules, indicative consumption 8.5 kg/h
"Fastblock" glue pot, pneumatic pre-cutting shear
Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment
- K-SEL end trimming unit
Rotation speed: 12000 rpm, motor inclination from 0 to 15°
Duodjzcpixopfx Adtou
- RFK top/bottom flush trimming unit
Rotation speed: 12000 rpm
- RI 800 chamfering/flush trimming unit with copy pad
Rotation speed: 12000 rpm, spindle inclination from 0 to 25°
- GLC compact sanding unit, 1400 rpm
Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure
- SPN polishing station with textile polishing brush
- Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm
Air cushion track and belt conveyor. Arrival height from the ground: 79 cm
OTHER CHARACTERISTICS:
- General power supply: 400 V, three-phase + N + T, 50 Hz
- Installed power: IN 52 A nominal
- Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars
- Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h
- CE marking, lockable disconnect switch, emergency stop buttons

The listing was translated automatically. Translation errors are possible.