Multisaw

SCM M 3

Condition: excellent (used), CATALOGUE NUMBER 8029 TECHNICAL DATA - track width 300mm - working width of the roller 300mm - max. blade diameter 350mm - blade bore diameter 70mm - max. cutting height 120mm - table width with extension 760mm - table length 1540mm * from above: - ejectors (barrier protecting against material kickback) - sliding roller, metal, pressure roller - ejectors/pawls - sliding roller, metal, pressure roller - saw mandrel - 2 smooth, metal sliding rollers * from below: - guide rail - ejectors/pawls - track - central track lubrication - stepless feed speed adjustment - feed motor 1.1kW - main motor 18.5kW - diameter of dust extraction nozzle 180mm - overall dimensions L/W/H 2250x1450x1600mm - weight 1570kg Pgodsztv Saopfx Appst ADVANTAGES - Made in Italy - Very good condition - Used multi-blade saw Net price: 36900 PLN Net price: 8581 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Corner jointing machine, Pressta 4000 Shipping within the EU: approx. €350 Pgedjl Skl Dopfx Appet

Condition: excellent (used), CATALOGUE NUMBER 7901 Technical specifications: - track width 300mm Podpfjzul Aksx Appsgt - working width of the roller 300mm - max. disc diameter 350mm - disc bore diameter 70mm - max. cutting height 120mm - table width with extension 750mm - table length 1530mm - from above: - ejectors (barrier to prevent material from moving backward) - sliding roller, metal - ejectors - sliding roller, metal - roller with saw blades - 2 smooth sliding rollers, metal - from below: - guide strip - ejectors - track - central track lubrication - stepless feed speed adjustment - feed motor 1.5kW - main motor 22kW - brake - diameter of the dust extraction nozzle 200mm - overall dimensions L/W/H 2300x1370x1570mm - weight approximately 1700kg ADVANTAGES - Made in Italy - Very good condition - DTR documentation - Used multi-blade saw Net price: 32900 PLN Net price: 7651 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8028 TECHNICAL DATA - Track width 300mm - Roller working width 300mm - Max. blade diameter 350mm - Blade bore diameter 80mm - Max. cutting height 120mm - Table width 750mm - Table length 1540mm * From above: - Kickback pawls (barrier to prevent material from recoiling) - Metal feed roller, pressure roller - Kickback pawls/ratchets - Metal feed roller, pressure roller - Roller with saw blades - 2 smooth metal feed rollers * From below: - Guide rail (pneumatically adjustable) - Kickback pawls/ratchets - Track - Central track lubrication - Smooth feed rate adjustment - Feed motor 1.1kW - Main motor 25kW - Dust extraction nozzle diameter 1x200mm, 1x120mm - Overall dimensions L/W/H 2430x1530x1450mm - Weight 1540kg ADVANTAGES – Made in Italy – Guide rail – pneumatically adjustable – Very good condition Pgedpfx Ajzmfr Aoppst – Used multi-blade saw Net price: 38900 PLN Net price: 9047 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: used, machine/vehicle number: 007984, Max. machining width: 1300 mm Min. machining thickness: 4 mm Working Table: Fixed pass height Podpfx Aewqdbmsppogt Vacuum feed belt: yes No. Operating units: 4 Nr

Condition: excellent (used), CATALOG NUMBER: 7947 Technical specifications: - track width 300mm - working width of the roller 300mm - max. blade diameter 350mm - blade bore diameter 70mm - max. cutting height 120mm - table width with extension 750mm - table length 1540mm – from above: - deflectors (barrier to prevent material from retracting) - sliding roller, metal - deflectors - sliding roller, metal - roller with saws - 2 smooth sliding rollers, metal – from below: - guide strip - deflectors - track - central track lubrication - stepless feed speed adjustment - feed motor 1.5kW - main motor 37kW - diameter of the extraction nozzle 200mm - overall dimensions L/W/H 1800x1550x1500mm - weight approximately 1700kg Advantages: - Italian made - very good condition - DTR documentation Pgsdjzw Dw Sepfx Appot - used multi-blade saw Net price: 33900 PLN Net price: 7884 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8031 TECHNICAL DATA - track width 300mm - working width of the roller 300mm - max. disc diameter 350mm - disc bore diameter 70mm - max. cutting height 120mm - bed width with extension 1030mm - bed length 1740mm * from above: - deflectors (barrier protecting against material kickback) 2 rows - sliding roller, metal, pressure roller - deflectors/pawls - sliding roller, metal, pressure roller - roller with saws - 2 smooth, metal sliding rollers * from below: - guide rail - deflectors/pawls - track - central, electric track lubrication - stepless feed speed adjustment - feed motor 1.1kW - main motor 25kW - diameter of the dust extraction port 1x200mm, 1x120mm Pjdpfx Aeztv Rieppogt - overall dimensions L/W/H 2550x1800x1450mm - weight 1770kg ADVANTAGES - Made in Italy - Unpainted - Very good condition - Used multi-blade saw Net price: 57900 PLN Net price: 13465 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with higher fluctuations)

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Podszp Edwspfx Appsgt Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. All specifications according to the manufacturer.

Condition: used, Year of construction: 2019, machine/vehicle number: AB00012078, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 380 V, input frequency: 50 Hz, cutting height (max.): 120 mm, saw blade diameter: 350 mm, actuation type: electric, rotational speed (max.): 4,200 rpm, total length: 2,100 mm, total width: 1,750 mm, total height: 1,600 mm, overall weight: 1,866 kg, table height: 900 mm, Equipment: CE marking, documentation/manual, saw blade guard, Band width 300 mm Maximum blade diameter 350 mm Minimum cutting length 390 mm Feed rate 6-48 m/min Blade holder device diameter 70 mm Spindle rotation speed 4200 rpm Exhaust port diameter 200+100 mm Spindle diameter: 50 mm Bushing diameter: 70 mm Bushing equipped with spacer rings Podpfx Apoz Enhzopsgt Centralized automatic lubrication Four upper pressure rollers Machine dimensions (L/W/H): 210 / 175 / 160 cm Equipped with: Laser device – projects the cutting line reference onto the workpiece. Mechanical device / programmable guide, controlled from the mobile screen, for laser-guided cutting. Some typical applications: - Trimming irregular edges without using a guide. - Selecting good portions on boards with knots or cracks, using a fast-moving guide and a single blade.

Condition: good (used), Year of construction: 2000, Multiblade tracked SCM M3 4 - Italian production - year of production 2000 - DTR Pgedpfsg Tdfdex Appet TECHNICAL SPECIFICATIONS: track width 300 mm cutting height 120 mm engine power 25 kW max. blade diameter 350 mm max. workpiece width 1000 mm min. workpiece length 400 mm adjustable feed on the inverter pneumatically adjustable ruler on the right revolver ruler setting of 6 types three rows of anti-recoil pawls possibility of putting on a board - a shoe spindle diameter 50 mm sleeve diameter 70 mm sleeve equipped with spacers automatic central lubrication four upper pressure shafts spigot diameter 180 mm and 120 mm dimensions of the machine (length / width / height) 210/175/160 cm weight 1800 kg

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 0-241-06-5232, functionality: fully functional, operating hours: 12,608 h, cutting height (max.): 125 mm, cutting width (max.): 2,200 mm, cutting length (max.): 4,300 mm, Panel Saw Holzma HKL11/43/22 Max. cutting width: 4300 mm Pjdexfvp Ajpfx Appogt Max. cutting length: 2200 mm Max. cutting height: 125 mm The saw is in continuous operation, so viewing during operation is possible. The machine will be available from 02/03/2026.

Condition: excellent (used), Catalog number 7863 TECHNICAL DATA - track width 300mm - working width of the roller 300mm - max. blade diameter 350mm - blade arbor diameter 70mm - max. cutting height 120mm - table width with extension 750mm - table length 1530mm - from above: - ejectors (barrier to prevent material from recoiling) - sliding roller, metal - ejectors - sliding roller, metal - roller with saw blades - 2 smooth, metal sliding rollers - from below: - guide strip - ejectors - track - laser - central track lubrication - smooth feed speed adjustment on a frequency inverter - feed motor 1.5kW - main motor 26kW - brake - dust extraction nozzle diameter 200mm - overall dimensions L/W/H 1700x1400x1600mm - weight approximately 1700kg ADVANTAGES Podpfxeztaano Appegt – Made in Italy – With laser – Very good condition – Used multi-blade saw Net price: 39900 PLN Net price: 9279 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER: 7946 Pgjdpfxjzr U Hts Appet Technical data: - track width: 300mm - working width of the roller: 300mm - max. blade diameter: 350mm - blade bore diameter: 70mm - max. cutting height: 120mm - table width with extension: 1030mm - table length: 1840mm – Top: - ejectors (barrier protecting against material kickback): 2 rows - sliding roller, metal, pressure roller - ejectors - sliding roller, metal, pressure roller - roller with saw blades - 2 smooth, metal sliding rollers – Bottom: - guide strip - ejectors - track - laser - central track lubrication - stepless feed rate adjustment - feed motor: 1.1kW - main motor: 18.5kW - dust extraction port diameter: 200mm - overall dimensions (L/W/H): 1900x1800x1600mm - weight: 1770kg Advantages: - Italian made - with laser - unpainted - very good condition - used multi-blade saw Net price: 55900 PLN Net price: 13000 EUR Net price calculated using an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: used, Year of construction: 1970, Year of manufacture: 1970 Total pressing force at 320 atü: 80 tons Pressing cylinder: 6 pistons Motor power: 1.1 kW Heating-up time approx. 20 min. Price ex works. Pgsdpfx Aewx Rrnjppjt

Condition: used, Technical specifications: Track width: 300 mm Pedpfozzbfzox Appegt Max. cutting height: 120 mm Max. saw blade diameter: 350 mm Continuously adjustable feed rate Automatic lubrication system Anti-recoil protection Culaga Dust extraction port: 200 Safety switch Power supply: 380 V Main motor power: 25 kW Overall dimensions: Length: 1730 mm Width: 1490 mm Height: 1440 mm