Cut-to-length-lines

SCHLEICHER

Year of construction: 1993, condition: ready for operation (used), A complete cutting line for sheet metal processing is available. 1) Decoiler Schleicher H-B4-1250, year of manufacture: 1983, power: 11kW, max. load capacity: 12500kg, strip thickness range: 0.5mm-1.25mm, max. strip width: 1100mm. 2) Straightening machine Schleicher RM 8-53/160, year of construction: 1980, power: 7.68kW, strip thickness range: 0.5mm-1.25mm, strip width range: 300mm-1000mm. 3) Trimming shears. 4) HSK HSKW/SF shears, year of manufacture: 1993, max. strip thickness: 1.5mm, max. material width: 1280mm. 5) Stacking line Schleicher, year of manufacture: 1980, max. load capacity: 1000kg, strip width range: 300mm-1000mm, strip thickness range: 0.5mm-1.25mm, feed length range: 200mm-1250mm, power: 1.5kW. On-site inspection is possible. Gisdpfjw Az Rpsx Afaen

Condition: ready for operation (used), total length: 900 mm, total width: 400 mm, total height: 1,100 mm, empty load weight: 140 kg, gasleiding: Ø50 x 3,91 mm stalen buis: Ø60 x 3 mm roestvrijstalen buis: Ø60 x 2 mm koper/alu buis: Ø64 x 4 mm massieve staaf: Ø35 mm massieve rechthoekige staaf: 60 x 10 mm vlakke staaf (hard): 60 x 16 mm platte staaf (gemakkelijk): 60 x 30 mm doosdoorsnede: 60 x 30 x 4 mm maximale straal: 200 mm buigsnelheid: 1,25 2,5 rpm Gijdsxllirspfx Afasn video klik hier Motor power: 1,5 kWt

Condition: used, machine/vehicle number: 48111, Mitring machine Schleicher F7Serial-No. 48111- Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Gijdpfsh Axthsx Afajn

Condition: used, Year of construction: 1970, material width 200 mm material thickness 0,5 - 3,0 mm no. of straightening rolls 6 straightening roll diameter 70 mm number of draw-in rolls 2 diameter of draw-in rolls 160 mm Gjdpfx Afevzxm Heasin power requirement 3,1 kW weight 1,1 t dimensions (WxDxH) 1,5 x 1,2 x 1,9 m as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1999, sheet width 3000 mm plate thickness 3 mm 3 support arms 1 angle stop pneumatic hold-down device Giedpfxjr Ngtij Afajn Backgauge to be operated by hand

Condition: used, Year of construction: 1983, material width 200 mm material thickness 0,8 - 3,0 mm no. of straightening rolls 6 straightening roll diameter 53 mm number of draw-in rolls 2 Gedsvuk R Rjpfx Afaoin diameter of draw-in rolls 96 mm material cross-cut 400 mm² speed 3 - 15 m/min power capacity 0,75 kW weight 0,5 t Dimensions (WxDxH) 1,0 x 1,0 x 1,4 m with infinitely variable drive, straightening rolls individually manually adjustable, coil loop control can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min Giodpfx Afovuugieajn power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: excellent (used), Year of construction: 1980, strip width: 1.500 mm Gedpfx Afsqw Akmeasin strip thickness: 3 mm coil weight: 10 t

Condition: used, Year of construction: 1971, material width 300 mm coil weight 2,0 t material thickness 1,0 - 5,0 mm coil internal diameter 440 - 520 mm coil external diameter 1320 mm Gsdpfxovut Dte Afajin no. of straightening rolls 6 straightening roll diameter 70 mm number of draw-in rolls 2 diameter of draw-in rolls 70 mm power requirement 1,1 kW weight of decoiler 2,0 t dimensions decoiler (WxDxH) 2,0 x 2,0 x 1,7 mm weight of straightening machine 1,3 t dimensions straightener (WxDxH) 2,7 x 1,3 x 2,4 mm Straightening machine RM-S 300 with infinitely variable drive, pneumatic intermittent lifting, hydraulic inlet table, bending roll, alligator opening, coil loop control Decoiler H 2 with auxiliary drive, pneumatic snubber roll, hydraulic expansion, manually shiftable as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: good (used), Safety relay, relay, contactor, semiconductor contactor, contactor -Type: SSP 34 -Re1: 220 V 50 AC -Re2: 220 V 50 AC -500W max. 380V max. 6A max. Quantity: 1 piece available Gjdpfx Afeb A S Naeajin -Weight: 0.7 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, load capacity: 180 kg, arm reach: 2,900 mm, Model: KR210 (L180)-2 2000 Payload: 210kg or 180kg Arm Reach: 2700 mm or 2900 mm Condition: Used & Tested & Painted Year: 2005 (Multiple Options Available) Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets + Teach Pendant Gjdpfx Aeq Hfahefaein As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs.

Condition: used, PLC control, digital input, digital input, input module -Manufacturer: Schleicher, digital input Digital Input 24VDC Gsdpfx Aoqku I Nofaein -Type: UBE 24V 10D 31406792 -Quantity: 3x module available -Price per piece -Dimensions: 150/35/H200 mm -Weight: 0.5 kg/pc.

Condition: used, Contactor, semiconductor contactor, contactor, power contactor, time relay, safety time relay, safety control, motor contactor, auxiliary contactor -Manufacturer: Schleicher, time relay -Type: KZT11 -Article No.: 06001330 149 102 Gisdpfstvhthsx Afajn -Quantity: 3 pieces Reiais available -Price per piece -Dimensions: 100/25/H75 mm -Weight: 0.1 kg/piece

Condition: like new (used), Year of construction: 2025, functionality: fully functional, sheet thickness aluminum (max.): 10 mm, coil weight: 30,000 kg, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness copper (max.): 10 mm, sheet thickness brass (max.): 10 mm, cutting speed: 100,000 mm/min, product height (max.): 6 mm, working width: 2,000 mm, total width: 6,000 mm, total length: 35,000 mm, total height: 3,000 mm, feed roller diameter: 156 mm, Professional Coil Slitting Line 0.3 - 3 mm x 1500 mm x 15 Ton We offer accurate and fast cutting & slitting for coil materials; Stainless Steel, Aluminum, Copper, Galvanized, Brass, and Bronze. BOSPORAS’s Cut to Length & Slitting Line Machinery is a certain solution for various Materials and Dimensions, for your customized projects with heavy coil industries. Easy Operation with High-Level Automation. Gjdpfx Afjwutlveajin High Quality and Maximized Efficiency with Minimized Operation Cost High Capacity with Compact Design Project-Specific Straightening Designs for Top Quality Surface Accuracy Precision Production with Material-Specific Quality Rollers and Transfer System High Quality Cutting without Scrap Automated Stacking System Solutions Double Head Hydraulic Expansion Decoiler with Transmission Box Coil Car Match Leveler Slitting Head Hydraulic Shear Tensioner and Separators Hydraulic Expansion Recoiler Loop with Sensors Automated Hydraulic Bridges Exit Coil Car Quick Slitting Knife Change Coil Tilting Car

Condition: used, Quills, processing unit, automatic drilling machine, drilling machine, standing drill, multi-spindle drilling machine Gsdpfx Afechnx Usajin -2x: quill machining units -1x: Horizontal -1x: vertical -Max. Feed: stroke mm -Speed: rpm -Built-in drill chucks: 1.5-13 mm -Dimensions: 1050/1205/H1550 mm -Weight: 222 kg