Strand-pelletizer cutting lenght adjust

PREVIERO TA 200 NA

Condition: new, Functionality: fully functional, Year of construction: 2025, Our stationary crushing and screening plant, with a capacity of 200-350 tons per hour, consists of a 30 m³ vibrating feeding bunker, mid-screen, CLK-110 jaw crusher, cone crusher, vertical shaft impact crusher, stock and return conveyors, control cabin, and automation system. Products transferred to the feeding bunker are separated from dirt and mud using the intermediate screen and are bypassed with a bypass conveyor. The material above the screen goes to the jaw crusher, while the products on the second level drop onto the jaw discharge conveyor, and the products on the lowest level are discarded as bypass. The jaw crusher has a maximum feeding capacity of 800 mm and crushes the products, which first go to the washing screen. Here, the finest products are sent to the stock area with a screw washer, and the other products are sent to the cone crusher. The products coming out of the cone crusher are directed to the other screen and the vertical shaft impact crusher, allowing the desired products to be obtained from the final screen at high quality. Bm3Jlblmsc TBX-30 Vibrating Feeding Bunker CLK-110 Jaw Crusher TE-2060x3 2000x6000 3-Deck Vibrating Washing Screen HY-800 8000x8000 Screw Washer 20m3 Cone Crusher Feeding Bunker CC-300 Cone Crusher 20m3 Vertical Shaft Impact Crusher Feeding Bunker VSI-900 Vertical Shaft Impact Crusher TE-2060x4 2000x6000 4-Deck Vibrating Screen TE-2060x3 2000x6000 3-Deck Vibrating Screen Dqrhth Conveyor Belts, Control Cabin, Electrical Panel, and Automation System

Year of construction: 2023, operating hours: 1 h, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: S23MythoSarya03, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control Drgfyr

Condition: new, Year of construction: 2024, Functionality: fully functional, type of input current: three-phase, overall weight: 1,150 kg, warranty duration: 12 months, type of cooling: water, space requirement height: 2,320 mm, space requirement length: 2,640 mm, nominal current: 1,000 A, nominal power: 200 kW (271.92 HP), nominal voltage: 230 V, Equipment: type plate available, -Our IGBT-SIC 200 KW induction heating/welding unit is specially designed for straight seam welding. It includes DC power unit, central control unit, water-water (air-water) heat exchange unit and inverter output unit. Field of application: Straight seam welding of steel pipes, aluminum pipes, H-beams and special pipe welds. DC power unit: DC units convert the three-phase AC power supply into regulated DC power supply. They have stable performance, high efficiency and low noise levels. Central control unit: Equipped with LCD screen, power and speed control of the motor. The line can be fully controlled by the central control unit. We use Siemens control system. Water-water heat exchange unit: A. System uses normal water for cooling. B. High efficiency of heat dissipation, low cost. C. Reservoir is used for outdoor water. More stable, reliable and durable: The high voltage and high current of SIC provide a more reliable guarantee for the stable operation of welding machines. In addition, SIC is more durable and reduces the failure rate. Compared with MOSFET high-frequency welding machines, the dielectric strength and current overload margin of SIC high-frequency welding machines are significantly improved (10% higher than those of other manufacturers in the same industry). Compared with MOSFET, the temperature range of SIC is wider; therefore, SIC works more stably and has a longer service life under the same working conditions. High efficiency, less losses, energy saving of 10% compared to MOSFET high-frequency welding machines: Low conduction losses: The resistance of SIC is only about 15% of that of MOSFET, which means that the power losses are only 85% lower than that of MOSFET. At the same time, both heat loss and cooling requirements are reduced. Low switching losses: The high switching speed of SIC reduces switching losses and enables the production of high-frequency welding machines. Low drive losses: The input capacitance and gate charge requirement of SIC is only 20% of that of MOSFET, resulting in low drive circuit energy consumption and a significant reduction in package temperature. Warranty and after-sales service are of course a matter of course. B0Wp2Pfa0G If you have any questions, please contact us using the contact details provided and we will be happy to advise you and provide you with technical details. Longitudinal seam welding machine Longitudinal seam welding machine Longitudinal seam welding system Longitudinal seam welding system Longitudinal seam welder Pipe welding machine Pipe welding machine Pipe and pipe welding machine Pipe and pipe welding system Pipe welding system Pipe welder Pipe welder Pipe welding technology Induction welding machine Induction welding High frequency induction High frequency induction

Year of construction: 2024, Condition: new, Functionality: fully functional, Technical description: The system is designed for weighing standard cars. The loading trolley (200 or 300 litres) is pushed into the system. The free stroke and the weighing process are triggered by a button. The free stroke is carried out via motor drive. In connection with the bending rod weighing cell and the weighing terminal, the weight can be read in the display and passed on to the existing DMS or ERP system. If necessary, the recipe scale can be equipped with casters as a mobile version. The system can be equipped with all common weighing terminals. • Stainless steel base frame in hygienic design • 1 drive unit Boe2Wjpukxe • Button • Shafts, bearings • Height-adjustable feet (alternatively mobile version) • CEE plug

Year of construction: 2023, operating hours: 1 h, Condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control Drgfyh

Year of construction: 2025, operating hours: 1 h, Condition: as good as new (ex-display), Mytho S B83Rrbaj7S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: used, overall weight: 36,000 kg, maximum load weight: 28,210 kg, axle configuration: 3 axles, loading space length: 13,515 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, first registration: 06/2019, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, KNAPEN K 200 sliding floor +/- 91 cbm, Cargo-Floor floor with 21 boards 10 mm, stainless steel wear plate at the rear under the sliding floor, complete emptying (moving bulkhead), push-in/push-out function, KNAPEN radio remote control V1 (for floor, lifting axle, work lights), loading pressure gauge, double-wing door with espagnolette at the rear, access and standing area at the front of the body, service door at the front, side wall protection tarpaulin, roll-up tarpaulin, oil temperature fuse, storage box, work lights, closed side impact protection, ABS, EBS, SAF Intra CD axle(s), lifting axle, disc brake system, aluminum fall supports, air suspension with lifting/lowering device, vehicle can be covered with advertising and/or labeled Drfsr2

Condition: used, Year of construction: 2001, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-fold tool turret VDI30 - Overhauled 2023 - Year of construction 2001 Dqqs9H Technical data Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore of main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feed rates: - Working feed Z/X: 0 - 7000 mm/min - Rapid traverse Z/X: 10 m/min Tailstock: - Tailstock shank Ø: 58 mm - Tailstock shank travel: 155 mm - Morse taper tailstock: 4 Motors: - Main motor power: 7.5 kW - DC motor Z-axis power: 6.8 Nm - DC motor X-axis power: 3.4 Nm - Motor pump power: 0.57 kW Dimensions: - Machine weight: approx. 2300 kg - Dimensions WxHxD: 2980 x 1730 x 1610 mm

Condition: used, Year of construction: 2003, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-fold tool turret VDI40 - Year of construction 2003 Technical data Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm G0Cmy7Z - Bed width: 300 mm Headstock: - Bore of main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: 5 - Spindle speeds: 2 - Constant cutting speed: 0-700 / 700-3000 rpm Feed rates: - Working feed Z/X: 0 - 7000 mm/min - Rapid traverse Z/X: 10 m/min Tailstock: - Tailstock shank Ø: 58 mm - Tailstock shank travel: 155 mm - Morse taper tailstock: 4 Motors: - Main motor power: 7.5 kW - DC motor Z-axis power: 12 Nm - DC motor X-axis power: 4 Nm - Motor pump power: 0.57 kW Dimensions: - Machine weight: approx. 2200 kg - Dimensions WxHxD: 2980 x 1730 x 1610 mm

Condition: excellent (used), Year of construction: 1993, CNG Tank Gas Methane Trailer Natural gas 200 Bar Manufacturer: SAMRO Dpdoup Year: 1993 Tare: 6900 kg We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be happy to provide you with a quotation or give you more information about other pressure vessels.To discuss the possibilities, please contact us by phone or e-mail.

Condition: used, mileage: 673,000 km, power: 158 kW (214.82 HP), first registration: 12/2003, fuel type: diesel, number of seats: 40, gearing type: automatic, next inspection (TÜV): 04/2019, emission class: euro3, color: red, brakes: retarder, Equipment: ABS, air conditioning, parking heater, VDL BERKHOF AMBASSADOR 200 *ANALOG TACHO DEFECTIVE ----STARTER NEW * HIGH PRESSURE PUMP NEW * ALL INSPECTIONS NEW * AUTOMATIC GEARBOX * RETARDER/INTARDER AUTOMATIC * AIR CONDITIONING THERMOKING * LIFTING & LOWERING FUNCTION * MICROPHONES * ANALOG TACHO * SEATS: 40 * STANDING PLACES: 41 * STROLLER PARKING SPACE * WHEELCHAIR PARKING SPACE * WHEELCHAIR RAMP-MECHANICAL Cssdkzqb * DOUBLE WIDTH CENTER DOOR * VEHICLE DIMENSIONS: * L: 11.95M * W: 2.50M * H: 3.09M * CUMMINS ENGINE * GERMAN VEHICLE * AVAILABLE IMMEDIATELY * EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ * * EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ * ----For english please call this number: VEHICLE RESERVATIONS PLEASE ONLY VIA E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID Subject to changes, errors and advance sales! You can find more vehicles on our Sales are subject exclusively to our terms and conditions - see homepage For sales to EU and third countries, a deposit of at least ¤ 500.00 / ¤ 1,000.00 will be charged (For sales to the EU and third countries will be levied deposit/guarentee of at least ¤ 500.00 / ¤ 1,000.00) PLEASE NOTE THAT FOR SOME VEHICLES THE LABELS ARE REMOVED USING PHOTOSHOP

Condition: excellent (used), Year of construction: 2018, We are offering a set that we have never had before U2Gpf27Rm9 Top maintained condition AK folding bench Working length a little over 2m Sheet thickness iron 1,5mm - aluminum 2mm Bending support if desired pneumatically via small lever Depth stop 1m with digital display and adjustable from the front continuous sheet support and finger stop down to approx. 1cm Optional - beading device and hemming device for plug-in seam on rail (for this system there are many other tools such as scissors, lead wavers, beading etc.) Plate shears HS Working width slightly over 2m Material thickness 1.25 mm iron - aluminum 1.75 Depth stop 1m adjustable from the front with digital display Optional sheet metal carriage with chute 2018 new price over 25000 - today significantly more

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: Ft2025 7-2, sheet thickness steel (max.): 30 mm, type of input current: three-phase, sheet thickness aluminum (max.): 20 mm, working range: 30 mm, overall weight: 1,500 kg, sheet thickness (max.): 30 mm, laser power: 6,000 W, total length: 8,000 mm, total height: 1,700 mm, total width: 3,450 mm, table width: 2,000 mm, table length: 7,000 mm, cutting length (max.): 6,000 mm, Equipment: cooling unit, 200 amp cnc plasma cutting machine. Plasma has got water cooling system. working area X axis=2000 mm Y axis=6000 mm 8.5 nm servo motor. Btzpmwhozc FREE software glass program

Condition: excellent (used), Viessmann Vitoplex 200 270Kw Used Bi: 2019Type:SX2A Power: 270Kw Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale Seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information Dqtb0V

Condition: as good as new (ex-display), Year of construction: 2024, Horizontal Bending press Zopf Bubmhlavxb - model T 200 with automatic backgauge - programable backgauge 900 mm with - year of construction 2023 - demo model - length of stroke 185 mm - weight 500 kg Bending capacity flat material mild steel 200x12 mm (with special tooling) with punch radius 5 mm and die V = 100 mm Touch screen with programming of the stroke and backgauge demo model

Condition: good (used), We offer you here a used shelf connector of the manufacturer Jung Heinrich for sale. Technical data of the shelf connector: Manufacturer: Jung Heinrich Type: Esmena Included in delivery: 01x shelf connector used material colour: sendzimir galvanized shelf distance: approx. 200 mm L-profile: approx. 85 x 40 mm Weight/pc: approx. 0.519 kg/pc. 04x hexagon head screws, M8 x 20 8.8. 04x hexagon nut, M8 Bke3Tv8Ge 04x washers, M8

Condition: used, axle configuration: 3 axles, wheelbase: 9,060 mm, first registration: 01/2019, suspension: air, color: green, tire size: 385/65, Year of construction: 2019, Axle configuration Tyre size: 385/65 Axle brand: BPW EAC HD Brakes: disc brakes Suspension: air suspension Rear axle 1: LM rims; lift axle; max. axle load: 9000 kg; tire profile left: 60%; tire profile right: 60% Rear axle 2: LM rims; max. axle load: 9000 kg; tire profile left: 50%; tire profile right: 50% Rear axle 3: LM rims; max. axle load: 9000 kg; tire profile left: 60%; Tire profile right: 60% Dimensions Dimensions (L x W x H): 1404 x 255 x 400 cm Weights Dqxwmd Empty weight: 7,720 kg Payload: 34,280 kg GVW: 42,000 kg Maintenance APK (technical main inspection): checked until 01.2026 Identification License plate: OR-82-NV Further information Contact Bob Beukers for more information.

Condition: new, Model Name TITAN 660 - 2000 Un3Ucjf8Qp

Condition: new, Bernardo universal lathe Titan 660 x 2000 Technical Specifications Centre distance 2000 mm Centre height 330 mm Swing diameter over bed 660 mm Swing diameter over cranking 900 mm Jvgvt3 Swing diameter over cross slide 460 mm Bed width 400 mm Spindle bore 105 mm Spindle mounting DIN 55029, D1-8 Speed range (16) 25 - 1600 rpm Range of longitudinal feeds (25) 0.044 - 1.48 mm/U Plan feed range (25) 0.022 - 0.740 mm/U Metric threads (54) 0.45 - 120 mm inch thread (54) 7/16 - 80 Gg/1″ Pinol diameter 90 mm Sleeve travel 235 mm Sleeve holder MK 5 Engine power 7,5 kW (10,0 PS) Machine dimensions (W x D x H) 3630 x 1200 x 1520 mm Weight approx. 2900 kg Features & Benefits Versatile application possibilities in general mechanical engineering, production, single part production, ... Central, handy switch for feeds and threads with guide and feed spindle Prism bed made of grey cast iron, inductively hardened and precision ground Modern main spindle bearings with angular contact roller bearings in precision design Hardened and ground gears and shafts, also in the feed gear Rapid traverse lengthwise and flat as standard to reduce non-productive times Large spindle bore (105 mm) for large diameter workpieces Soft start due to the mechanical multi-disc clutch Electromechanical foot brake to reduce non-productive time Best cutting performance even during face turning For stiffening the bed guide and for minimizing

Condition: used, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: KM1-1162, overall weight: 7,000 kg, CNC lathe OR (VICTOR TAICHUNG MACHINERY WORKS CO. LTD.) Vturn A200 Machine data Rotation speed: Max. 7,000 rpm Control: FANUC Series 0i-TF Plus Bw3Jhsshoa Weight: 7,000 kg Chip conveyor FONGEX KM-1

Condition: used, axle configuration: 3 axles, first registration: 01/2010, suspension: air, color: yellow, tire size: 385/65R22.5, Year of construction: 2010, Tire size: 385/65R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire profile left: 60%; Tire profile right: 60% Rear axle 2: Max. axle load: 9000 kg; Tire profile left: 50%; Tire profile right: 50% Rear axle 3: Max. axle load: 9000 kg; Tire profile left: 60%; Tire profile right: 60% Curb weight: 7,820 kg Contact Bob Beukers for more information. Drfeot

Condition: used, axle configuration: 3 axles, first registration: 01/2010, suspension: air, tire size: 385/65R22.5, Year of construction: 2010, Tire size: 385/65R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire profile left: 60%; Tire profile right: 60% B2Ujrdsl8G Rear axle 2: Max. axle load: 9000 kg; Tire profile left: 70%; Tire profile right: 70% Rear axle 3: Max. axle load: 9000 kg; Tire profile left: 70%; Tire profile right: 70% Curb weight: 7,820 kg Contact Bob Beukers for more information.

Condition: used, axle configuration: 3 axles, wheelbase: 9,060 mm, first registration: 04/2015, suspension: air, tire size: 385/65R22.5, Year of construction: 2015, Axle configuration Tire size: 385/65R22.5 Axle brand: Mercedes Brakes: disc brakes Suspension: air suspension Rear axle 1: lift axle; Max. axle load: 9000 kg; tire profile left: 40%; tire profile right: 40% Rear axle 2: Max. axle load: 9000 kg; tire profile left: 40%; tire profile right: 40% Rear axle 3: Max. axle load: 9000 kg; steered; tire profile left: 30%; Tire profile right: 30% Dimensions Dimensions (L x W): 1404 x 255 cm Weights Empty weight: 7,850 kg Drdijt Payload: 34,150 kg GVW: 42,000 kg Maintenance APK (technical main inspection): checked until 11.2025 Identification License plate: ON-09-RG Further information Contact Bob Beukers for more information.

Condition: excellent (used), axle configuration: 3 axles, first registration: 08/2024, suspension: air, color: white, tire size: 385/65, Year of construction: 2024, Equipment: ABS, = More options and accessories = - Electronic braking system (EBS) - Rear doors - Air suspension = Remarks = PowerSheet automatic roll-up tarpaulin Also available Knapen 80m3, more info Mark van der Steen Dq0Qcn = More information = Axle configuration Tire size: 5/65 Axle brand: Knapen Brakes: Disc brakes Suspension: Air suspension Rear axle 1: LM rims; Lift axle; Max. axle load: 9000 kg; Tire profile left: 70%; Tire profile right: 70% Rear axle 2: LM rims; Max. axle load: 9000 kg; Tire profile left: 90%; Tire profile right: 90% Rear axle 3: LM rims; Max. axle load: 9000 kg; Tire profile left: 60%; Tire profile right: 60% Weights Empty weight: 6,955 kg Payload: 35,045 kg GVW: 42,000 kg Maintenance, history and condition APK (main technical inspection): checked until 08.2025 Technical condition: very good Visual condition: very good Further information Contact Mark van der Steen for more information.

Condition: used, axle configuration: 3 axles, first registration: 08/2009, suspension: air, color: white, tire size: 385/65, Year of construction: 2009, Equipment: ABS, = Further options and accessories = C93Hxt3 - Rear doors - Air suspension = Further information = Refenmaß: 385/65 Axle brand: DCA Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. Axle load: 9000 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 2: Max. Axle load: 9000 kg; Tire tread left: 70%; Tire tread right: 70% Rear axle 3: Max. Axle load: 9000 kg; Tire tread left: 70%; Tire tread right: 70% Unladen weight: 7,800 kg Contact Bob Beukers for more information.