Nikmann S 350 Panel Saw

Nagema S 350

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Ledpfx Alozp Edwj Tshl Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. All specifications according to the manufacturer.

Condition: new, Year of construction: 2026, DCV6500TC VIBER – Professional Industrial Dust Extraction System with Automatic Filter Cleaning and Heat Recovery The DCV6500TC VIBER is a modern industrial dust extraction system designed for intensive operation in woodworking and manufacturing facilities. It combines high performance, quiet operation, and energy-saving technologies. The unit is equipped with the VIBER system (automatic filter cleaning), TC technology (sound-insulated head housing), REHEAT system (heat recovery), and DAMAGE PROTECT (mechanical rotor protection). Main Advantages of the Machine Automatic VIBER filter cleaning system – effective filter cleaning without interrupting operation. REHEAT heat recovery system – recovers heat from exhaust air and improves thermal comfort. DAMAGE PROTECT system – protects key components against mechanical damage. Fully enclosed TC housing – reduces noise and vibrations during operation. High efficiency of 6500 m³/h – effective dust extraction from multiple workstations simultaneously. Large waste container capacity – 500 litres, reducing the frequency of emptying. Design and Technology The DCV6500TC VIBER has been designed for maximum reliability and long-term operation. The robust steel construction minimizes vibration transfer, while the dynamically balanced metal rotor ensures quiet operation and system stability. The specially designed fan blade geometry improves extraction efficiency while reducing energy consumption. The TC housing with acoustic insulation effectively lowers noise levels in the production area. Precision and Work Efficiency The filtration system, based on 32 polyester filters, captures particles down to 5 microns in size. For even higher filtration efficiency, optional HEPA filters can be installed. Quick-access waste containers and intuitive control via the electrical control cabinet improve operator comfort and increase overall productivity. Applications The DCV6500TC VIBER is an industrial-grade central dust extraction system designed for cooperation with machines such as: sanding machines, panel saws, edge banders, milling machines. It is ideal for continuous operation in manufacturing plants where air quality and the reliability of the extraction system are essential. Lsdpfx Aeuc U N Ujl Tshl Standard Equipment VIBER system – automatic filter cleaning TC insulated housing for noise reduction REHEAT heat recovery system DAMAGE PROTECT mechanical rotor protection Control cabinet with main switch Mobile waste containers with viewing windows – 2 × 250 L Technical Specifications Parameter Value Motor power S1 5.5 kW / 400 V, 50 Hz Motor speed 2900 rpm Extraction capacity 6500 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 280 mm Air velocity 28–32 m/s Filtration area 16 m² Filter material Polyester, 5 microns / filter category "G" Number of filters 32 Waste container capacity 2 × 250 L Dimensions (L × W × H) 2440 × 930 × 2270 mm Weight 440 kg

Condition: new, Year of construction: 2026, DCV8900TC VIBER Industrial Dust Collector – Advanced Extraction System with Automatic Filter Cleaning The DCV8900TC VIBER is a modern industrial dust extraction system designed for intensive operation in professional woodworking plants and industrial production facilities. Combining advanced technology with maximum efficiency, it ensures stable extraction performance while reducing noise and vibration levels. The integrated VIBER automatic filter cleaning system minimizes maintenance requirements and maximizes operational reliability. Key advantages Ledpfxsudaazo Al Tjhl VIBER system – automatic filter shaking and cleaning without interrupting operation. TC acoustic enclosure – effective noise insulation and vibration reduction. DAMAGE PROTECT system – mechanical protection against the intake of hard foreign objects. REHEAT heat recovery system – recovers heat from exhausted air, improving energy efficiency. High airflow capacity of 8,900 m³/h – designed for large industrial facilities. High airtightness construction – cleaner air and reduced heat loss inside the production hall. Construction and technology The extraction unit is equipped with a reinforced metal impeller that is dynamically balanced to ensure stable, quiet, and reliable operation. The fan blade geometry has been optimized for maximum suction efficiency and reduced energy consumption. The integrated REHEAT system enables recovery of thermal energy from discharged air, significantly lowering operating costs and improving the overall efficiency of the ventilation system. Precision and performance The DCV8900TC VIBER maintains a constant suction velocity of 28–32 m/s, even when operating with multiple machines simultaneously. Polyester filters with a filtration accuracy of up to 5 microns, with the option of installing HEPA filters, ensure excellent air quality in demanding industrial environments. The automatic filter cleaning system maintains consistent airflow performance and reduces downtime associated with manual maintenance. Applications The DCV8900TC VIBER is designed for large-scale woodworking, furniture manufacturing, and industrial production facilities. It is ideal for extraction from machines such as: edge banding machines sanding machines panel saws format saws CNC woodworking equipment The unit works perfectly as a central dust extraction system for multiple production stations operating simultaneously. Standard equipment Automatic VIBER filter cleaning system TC acoustic insulated enclosure REHEAT heat recovery system DAMAGE PROTECT protection system Control cabinet Metal waste containers (500 L) Polyester filter cartridges Technical specifications Parameter Value Motor power 7.5 kW / 400 V, 50 Hz Motor speed 3,000 rpm Extraction capacity 8,900 m³/h Maximum vacuum pressure 3,000 Pa Noise level 80 dB Suction inlet diameter 300 mm Air velocity 28–32 m/s Filter surface area 20 m² Filter material Polyester, 5 microns / filter category "G" Number of filters 45 Dimensions (L × W × H) 2400 × 1170 × 2240 mm Weight 500 kg

Condition: new, Type MB506C Working width 600 mm Overall length 2500 mm Lhjdjd Srkbjpfx Al Tjl Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK DC3000 Cyclone Dust Collector – Advanced Sawdust and Dust Extraction System The CORMAK DC3000 is an advanced cyclone dust extraction system designed for intensive dust collection processes in woodworking, furniture manufacturing, and metalworking industries. Thanks to its modern cyclone separator, powerful centrifugal sawdust fan, and dual filtration system, the unit efficiently removes both coarse and fine dust particles from the air. The DC3000 sawdust extractor is equipped with an automatic filter cleaning system, ensuring consistent performance and reduced maintenance requirements. Lsdpfjwwtz Nex Al Tshl Key advantages Automatic filter cleaning system – maintains constant extraction efficiency and reduces downtime. Cyclone separator – effectively separates larger dust particles before they reach the main filter. High-performance centrifugal fan – provides strong suction with low operating noise. Dual filtration system – suitable for both dry and damp sawdust applications. Compact and mobile design – equipped with a durable metal waste container for convenient operation. Precision sealing system – airtight connections ensure high vacuum performance. Construction and technology The CORMAK DC3000 is equipped with a powerful 3 kW three-phase motor (400 V) operating at 2,800 rpm. The centrifugal fan generates high vacuum pressure, enabling efficient extraction even from multiple suction points. An integrated pressure gauge allows real-time monitoring of filter condition and system performance. The cyclone separator reduces the load on the main filter by removing heavier particles before filtration, extending filter life and improving overall efficiency. Precision and performance The cyclone separation system effectively removes larger contaminants, significantly reducing filter clogging. With an extraction capacity of up to 7,000 m³/h, the DC3000 provides efficient operation in multi-point extraction systems and high-dust environments. The combination of two collection containers and four transport wheels improves functionality, mobility, and ease of operation in industrial environments. Applications The CORMAK DC3000 dust extraction system is suitable for: woodworking plants and sawmills furniture manufacturing and flooring industries workshops processing soft metals building material warehouses with high dust levels Standard equipment Automatic filter shaker system Pressure gauge Dual filtration system (pre-filter and main filter) Metal container under the cyclone separator Transport wheels Optional equipment Additional suction outlets with different diameters Pipe distribution systems for workshop-wide extraction networks Protective filter covers Technical specifications Parameter Value Extraction capacity 2,000 – 7,000 m³/h Noise level 75 dB Fan speed 2,800 rpm Suction connections 3 × Ø100 mm / 1 × Ø200 mm Number of containers 2 Motor power 3 kW / 400 V Dimensions (L × W × H) 1300 × 1000 × 2200 mm Weight 219 kg

Condition: new, Year of construction: 2025, I am selling several machines, equipment, etc. for woodworking here, including forklifts, aerial work platforms, as well as accessories and spare parts. Therefore, be sure to check out my other auctions as well! Panel saw, table saw, circular saw, joiner's circular saw, format saw WH Machines Type: Z45 - 400E Professional New wide aluminum format carriage 320 cm with hard metal round bar guide system Width approx. 415 mm Extension table with extendable aluminum rip fence, incl. 2x folding stop Rip length up to approx. 300 cm Electric height adjustment of the saw blade Stable round bar guide for the saw unit. Electric tilting of the saw blade up to 45° with digital display of the tilting angle Precise tilting segment guide for the saw unit. Parallel fence up to 125 cm with fine adjustment Stable 50 mm round bar guide Parallelogram guard with upper extraction can be folded away for vertical workpiece cuts. 2 different speeds adjustable (4000/600 rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scoring saw with 120 mm scoring saw blade and electric height adjustment Motor power main motor 5.5 kW Lhjdpfxeh Hauyj Al Tol with overload protection and thermal monitoring. Motor power scoring saw 1.1 kW Body made of stable 6 mm box construction with reinforcement Stable cast iron worktop incl. rip fence wedge and eccentric workpiece holder The machine can also be purchased through a lease-purchase agreement with a term of 36 months. This offer is a lease-purchase leasing offer via DLL Leasing with a term of 36 months. Credit check and processing are carried out by DLL Leasing. Other terms and conditions available upon request. Please inquire for further data, delivery times and availability. Depending on availability, the machine can be inspected and tested at our warehouse. A prior inspection is highly recommended; simply leave your phone number by email, and I will get back to you regarding an inspection appointment. Subject to prior sale, all information without guarantee. The machines can be picked up by the customer or shipped via freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; depending on the distance and unloading possibilities, they may vary; please inquire. An invoice with VAT will be issued.

Condition: new, Year of construction: 2024, I sell the new fourside moulder LEADERMAC COMPACT 430, New machine year 2024. Showroom machine ! Configuration 4 spindles: Bottom 7,5 kW / 10,0 HP Right 7,5 kW / 10,0 HP Left 7,5 kW / 10,0 HP Top 7,5 kW / 10,0 HP Feeding speed adjustable 6-24 m/min. Feeding motor 7,5 kW / 10,0 HP + inverter Element width max. 15-300mm Element height max. 10-200mm Alle 4 Spindels 6000 rpm. Schneider Touch-Screen EASYSET Electronic programmer for setting the working width, top spinde, aka working height, and height of the pressure zone. Material pressures for short elements. 3-zone pneumatic pressure system for feeding wheels. Total weight 4000kg. Total power 39 kW / 52 HP Fully working. Lhoderfud Iepfx Al Tjl Available immediately Showroom machine, fully NEW ! Incl. CE and complete Documentation !

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DC2200 Model The CORMAK DC2200 is a powerful and robust cyclone dust extractor, designed to efficiently purify the air in woodworking shops, furniture factories, and metalworking facilities. Thanks to its cyclone separator, high-performance radial fan, and modern filtration system, the machine ensures effective particle separation and long-term high efficiency. Main Advantages of the CORMAK DC2200 High extraction capacity – up to 2800 m³/h – effective removal of dust and shavings from multiple workstations simultaneously Cyclone separator – separates larger particles before the filter, extending its service life Powerful 2.2 kW (2200 W / 50 Hz) motor – stable and reliable continuous operation Large 151-liter metal container – convenient and safe waste collection Filtration area of 4.8 m² – ensures high efficiency in capturing fine dust particles Compact, mobile design – sturdy frame with transport wheels for easy movement Quiet operation – optimized fan design reduces noise without sacrificing performance Design and Technology The CORMAK DC2200 is equipped with a 365 mm radial fan, generating a maximum static pressure of 2220 Pa. This allows efficient air suction through long ducting systems and multiple workstations. The extractor offers three suction inlets (3 × Ø100 mm) and one main inlet (Ø200 mm) for flexible setup according to the production area layout. The cyclone separation system effectively removes heavier particles at the inlet, directing only pre-cleaned air to the container. The cylindrical filter (Ø370 × 612 mm) ensures consistent airflow even during intensive operation. Performance and Ergonomics The DC2200 extractor is designed for daily use in small and medium-sized workshops. The 151-liter container (Ø620 × 570 mm) provides long working cycles without frequent emptying. With its compact dimensions (1320 × 900 × 1840 mm) and lightweight design (136 kg net), the unit fits easily into any workspace. Lhedoxrdhaopfx Al Tol Applications The CORMAK DC2200 is ideal for use in: Carpentry and furniture workshops Sawmills and wood-processing facilities Model-making and metalworking shops Production of composite and MDF components Standard Equipment Cyclone separator Cylindrical filter with large filtration surface 151 L metal container for dust and shavings Transport wheels Suction inlets: Ø200 mm and 3 × Ø100 mm Technical Specifications Parameter Specification Motor power 2.2 kW / 50 Hz Airflow (without filter) 3900 m³/h Max. static pressure 2220 Pa Fan diameter 365 mm Inlet diameter 1 × Ø200 mm / 3 × Ø100 mm Container volume 151 L Container dimensions Ø620 × 570 mm Filter surface area 4.8 m² Filter dimensions Ø370 × 612 mm Overall dimensions (L × W × H) 1320 × 900 × 1840 mm Weight (net / gross) 136 / 170 kg

Condition: excellent (used), Hebrock F5 Edge Bander Well-equipped, can be inspected before purchase. PRE-MILLING cutters, Glue application with a roller, Has a glue release mechanism, The glue pot is replaceable. A second glue pot is included. Pneumatic pre-trimming guillotine, Pressure rollers, Final trimming saw, Liquids Top and bottom milling unit, R1 – R2 Profiling cylinder Corner rounding unit Flat cylinder, Polishing unit Pneumatic 3-point adjustment Max. veneer thickness in roll: 3mm, Power consumption: 7.8 KW, Lodpsza Uq Aefx Al Tshl Max. part thickness: 50mm Used machine, very good condition Mileage: 62,000 meters

Condition: new, Year of construction: 2026, Capacity: 7000 m³/h Motor power: 7.5 kW Voltage: 3-phase / 380 V Lhedpfx Aljzx A Hbs Tol Net/gross weight: 800 / 900 kg Dimensions (L x W x H): 2965 x 1160 x 3063 mm Material: Flowerless galvanized steel sheet, zinc coating: 80 g/m² (both sides) Minimum water flow rate: 20 L/min Minimum required pressure: 1 bar Sound power level: 65 - 75 dB(A) Vacuum: 2500 - 2800 Pa Filtration area: 45 m² Dust container: 618 x 555 x 640 mm (0.22 m²) Safety and ATEX compliance Designed for use in potentially explosive environments Dust collection in accordance with ATEX requirements. A robust design and an effective dust extraction system support safe and efficient work in professional industrial applications. Efficient Sawdust and Dust Removal This vacuum sawdust extractor is designed for the effective collection of waste generated during the operation of woodworking machines. The system is ideal for extracting sawdust, shavings, and fine dust in workshops and production plants, improving workplace cleanliness and safety. Vacuum Filtration System The device operates using bag filtration technology using negative pressure generated by a powerful fan. Contaminants are transported into the extractor, where larger fractions fall directly into collection containers, while fine dust is retained on the surface of the filter bags. Automatic Filter Cleaning The system is equipped with a vibration filter cleaning mechanism, which helps maintain high filtration efficiency and stable performance. After the device finishes operating, the cleaning process is automatically activated, reducing dust buildup on the filters and improving user comfort. Universal Application The device is primarily designed for use with woodworking machines and machining lines, where effective removal of light production waste and maintaining appropriate working conditions are essential. Fire Suppression System – Water Sprinkler The extractor is equipped with a fire suppression system with a water sprinkler, permanently connected to the fire protection system via a pipeline maintained under constant water pressure. The sprinkler system must be connected to the fire protection system in accordance with the manufacturer's requirements. Explosion-Resistant Plate The extractor is equipped with an explosion-proof plate, designed to increase work safety in environments with dust explosion hazards. This element allows for controlled release of excess pressure in the event of a sudden increase in pressure within the system, reducing the risk of damage to the device and improving dust extraction system protection.