Band Saw - Automatic - Horizontal

MEP SHARK 350 NC HS 5.0

Condition: new, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height -- mm 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Fully automatic band saws with two-column guide for series cuts in particular materials that are difficult to machine and solid material. With this machine, MEP offers you a machine that is technically on the highest level and by using the highest quality materials one is not has an unbeatable, robust and torsion-resistant structure. An extreme Robust saw bow made of gray cast iron ensures the necessary stability impressive cutting results and the strong cast iron columns which the saw arch slides by means of pre-stressed linear guides take care of themselves at maximum load for the highest cutting precision. The modern Machine control (MEP NC 5.0) offers the user maximum ease of use and ensures trouble-free operation. (Check/evaluation/correction in real time) HIGHEST PERFORMANCE > The 2 operating modes (semi-automatic and automatic) make this possible efficient cutting in all conditions. > The control allows up to 100 cutting programs with each different quantities and lengths and minimizes the Programming time for frequently executed jobs. > The automatically detected start position of the saw head reduces the setting time. > The feed of the saw head via driven hydraulic cylinders Linear guides with preloaded recirculating ball bearings ensures the Reduction of mechanical vibrations during cutting and higher Rcodpfxelf Tu Us Af Ssk Stability. > The automatic alignment of the front saw blade guide head depends on the dimensions of the bars to be cut reduces the processing time. > The saw blade is tensioned by the brushless motor and is constantly controlled and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE > The feed system with 600 mm stroke is repeatable and cuts all lengths. > The vertical pair of rollers allows any type of bar or bundle that to be fed, to hold and to align. > The vector converter for stepless adjustment of the blade speed from 15 to 100 m/min allows cutting of any material. > The motorized chip conveyor can be positioned to the right or left of the cutting area to be assembled. CHARACTERISTICS: Fully automatic control - NC 5.0 -Innovative (Windows CE based) touch screen control with additional software Touch buttons for common operating functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via an in cylinder mounted servo valve, constant monitoring of the preselected torque 4 and with precise feed adjustment in millimeters/minute 5 -Setting / pre-selection of the stepless belt speed in m/min. -Saw band tension with band tension control and indication on the display by means electronic converter -Automatic detection of the beginning of the cut -Large 7" color touch screen to display and select all Machine functions and parameters and programming in a matter of seconds. Advertisement detailed alarm and error messages -Numerous special functions including different lengths + quantities (10 Run programs) as a sequence, clean cut, step execution and much more. -Stable, torsion-resistant and low-vibration cast steel saw frame -Carbide band guides for maximum cutting precision, hinged for easy saw blade change -Largely dimensioned deflection pulleys, adjustable, made of cast steel integrated belt circulation contro...

Year of construction: 1995, condition: ready for operation (used), A CNC rigid board milling and drilling center Bimatec Soraluce is available. Travel X/Y/Z: 2500mm/900mm/1600mm, speed: 2000rpm, spindle mount: ISO40/M16, tool positions: 30, transport dimensions X/Y/Z: approx. 5300mm/3450mm/3500mm, weight: approx. 13500kg, control: Heidenhain CNC 415, operating hours: 31507h. Including fixed table, movable stand, automatically indexing milling head, manual measuring probe, coolant device and filter system. Documentation available. On-site inspection is possible. Redeu T Rgwjpfx Af Sock

Condition: new, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm cutting width 350 mm Control NC 5.0 band speed 15 - 100 m/min capacity 0 degrees: round 350 mm capacity 0 degrees: square 350 x 350 mm table height 860 mm total power requirement 4 kW weight of the machine ca. 2,8 t Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two-column for 0 ° cuts on solid material and profiles made of steel, stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: - Driven chip conveyor, can be installed on the right or left of the machine - Clamping pressure regulation of the vices - Feeder with vertical rollers for lateral material support - Numerically controlled band saw machines, which can also be operated semi- automatically, with the new MEP 50, specially developed by MEP for automatic machines, Windows "CE" based control. Cutting cycle “clean cut” The feeder pushes the workpiece backwards in order to avoid scoring at the cutting surface when the belt moves up again at the end of the cut. - Fieldbus communication system with double microprocessor Rodpfx Aewu Hhdof Sock and serial connection. - The user interface with 7 ”touch screen display and mechanical keys are used for the operating functions of the sawmasc ins, guarantees a reliable, simple and intuitive use, as well as a real-time control of all cutting parameters standard equipment - Shark 350 NC Machine is immediately available from stock, subject to prior sale

Condition: new, MEP SHARK 350 NC HS 5.0 Fully automatic two-column metal band saw Rcsdsi Hmcdopfx Af Sek Item number MEP SHARK 350 NC HS 5.0 Motor power 4,0kW Bench opening 355 mm band dimensions 4640x34x1,1 mm weight 2800 Kg speed 15 - 115 m/min. infinitely variable cutting surface 0° 350 / 350x350 mm cutting surface 45° right cutting surface 45° left cutting surface 60° right cutting surface 60° left Description: Automatic hydraulic band saw machine in two-column design for 0° cuts on solid material and profiles made of steel, stainless steel and steel alloys up to a maximum of 350x350 mm. Numerically controlled band saw machine which can also be operated semi-automatically, with the new MEP 50 Windows 2 "CE" based control system, specially developed by MEP for automatic machines. The standard equipment includes: Driven chip conveyor, installable on the right or left side of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Clamping pressure regulation. 100 programs can be stored. The machine is available with 34 or 41 belt - without extra charge.

Year of construction: 2009, condition: used, 5-axis machining center with tool changer for aluminum or PVC profiles Max. machining length: 10,300 mm Travel Y-axis: 1150 mm Travel Z-axis: 715 mm A-axis swivel angle: 0° - 180° Rodpfx Afjtvrc Ss Ssck Angle C-axis: 0° - 180° Max. CNC, Metalurgia y Fabricación Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Saw blade diameter: 500 mm minimum quantity spraying Tensioner detection and automatic displacement 12 pneumatic material clamps Pendulum operation through two light barrier areas Manual control console Spindle in very good condition Loading is included in the price Weight: approx. 11,500 kg Viewing possible

Condition: used, Year of construction: 1995, x-travel 1200 mm y-travel 600 mm z-travel 600 mm table-size 1300 x 600 mm max. workpiece weight 2000 kg spindle taper ISO 50 spindle turning speed - stepless 30 - 3500 U/min feeds -stepless- 1 - 6000 mm/min rapid traverse 10 m/min power capacity - milling spindle 18 kW max. torque on the spindle 500 Nm distance work spindle /surface of the table 267 - 867 mm Rodsvw Duhjpfx Af Ssck distance table-vertical head 58 - 658 mm voltage 380 V / 50 Hz control voltage 230 V total power requirement 22 kW weight of the machine ca. 6,5 t dimensions 3,6 x 4,2 x 2,3 mm • CNC control DR. HEIDENHAIN TNC 360, • hydr. tool clamping attachment • electr. handwheel, • vertical head manually tiltable, • coolant device,

Condition: ready for operation (used), total height: 3,580 mm, total width: 3,452 mm, total length: 10,345 mm, controller manufacturer: Heidenhain, empty load weight: 23,500 kg, 4 assen gelijktijdig hoge druk koeling door spindel (20 bar) 4e as op tafel (zowel horizontaal als verticaal) Renishaw meetsysteem centraal smeersysteem Gereedschapswisselaar met 24 posities T-sleuftafels Stolle inbegrepen 7000 x 1500 mm Spaantransportband Longitudinal travel X-axe: 6000 mm Crosstravel Y -axe: 1200 mm Travel Z-axe (Height): 1500 mm Dimensions clamping space - table: 7000 x 1500 mm Rodpowaiukjfx Af Sock Power on spindle: 30 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 40 > 3000 rpm

Condition: new, Year of construction: 2025, functionality: fully functional, saw band length: 4,242 mm, High-performance fully automatic band saw in robust double-round column design and full enclosure. Developed for the highest sawing requirements. Technical Data: Cutting range Ø 325 mm or 380 x 325 mm Saw blade dimensions 4242 x 34 x 1.1 mm Saw drive 3.75 kW Working height approx. 820 mm Weight 2200 kg Connection 400 V-50 Hz Including technical features: - Smart NC control with 5.7" HMI touch screen for up to 100 different programs - V-Drive - Mitsubishi PLC control - Display of improper operation in plain text - Frequency-controlled saw drive 15–100 m/min - Material database for easy setting of cutting parameters - Digital display of saw feed rate in mm/min and cutting performance in cm²/min - Display of saw frame position in mm Rcodsbrxk Uopfx Af Sek - Automatic cut-in, selectable with or without front cut. Length of the front cut is freely programmable - LED strip work light - LED signal tower for visualizing machine status - Automatic band guide arm positioning - Vibration damping roller for vibration-free sawing - Hydraulic, adjustable chip conveyor - Clamping pressure regulation for both vices - Hydraulic saw blade tensioning with band breakage monitoring sensor - Coolant device with additional cleaning nozzle - Saw cut detection via rapid advance button - Manual material positioning with slow-motion function - Automatic cutting pressure regulation, pre-settable based on material quality - Material retraction after completion of cut to protect the saw blade during upward movement - Integrated material support on the infeed side, approx. 1,500 mm - Discharge table with coolant return, approx. 500 mm

Condition: new, Year of construction: 2022, cutting diameter 660 mm saw band length 9000 x 54 mm cutting width 1,6 mm Capacity 90° - round 660 mm Capacity 90° - square 650 x 650 mm Capacity 90° - rectangle 650 x 1080 mm Capacity 45° - round 660 mm Capacity 45° - square 650 x 650 mm Capacity 45° - rectangle 650 x 670 mm Rcedpfxeugnynj Af Sek Capacity 30° - round 410 mm Capacity 30° - square 410 x 410 mm Capacity 30° - rectangle 650 x 410 mm total power requirement 5,5 kW / 2775 Nm weight of the machine ca. 7100 kg dimensions of the machine ca. 2500 x 2200 x 4500 mm The KSY 2DT 650 is a semi-automatic and column-guided horizontal bandsaw. The machine also has a driven roller table, which is 2 metres long on the front has a spray mist has a spray mist cooling system. Equipped with a linear guided saw blade, the KSY 2DT 650 can perform precise and fast Mitre cuts. Standard Specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Automatic Angle Rotation - PLC TouchScreen - Blade Breakage Switch / Stop System - Led Lighting - Swarf Conveyor - Carrying - 2 Pieces 2 Meter Roller Table - USB Connection Output Optional Specifications - Motorized system for roller table - Laser Line - Lubrication mist - Extra double roller table The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, saw band length: 5,780 mm, saw band width: 41 mm, cutting range round steel at 45°: 450 mm, cutting range round steel at 90°: 450 mm, input voltage: 400 V, cutting range square steel at 90°: 450 mm, cutting range square steel at 45°: 420 mm, Semi-automatic sawing machine with 1-sided miter. (Also available with 2-sided miter.) Hydraulically operated material clamp. Hydraulically operated saw frame. Brand: KMS Type: KMY DG 450 Saw motor: 3 kW Height of support table: 888 mm Max / Min clamp opening: 0 / 740 mm Clamp height: 240 mm Mitre: 1 side Down speed: Continuously adjustable Cutting speed: Continuously adjustable, 20 - 90 m/min Band dimensions: 5780 x 41 x 1.3 mm Weight: ± 1600 kg Capacity: 90° (right angle): Round: Ø 450 mm Square: 450 x 450 mm Rectangle: 450 x 680 mm 60°: Round: Ø 450 mm Square: 450 x 450 mm Rectangle: 450 x 570 mm 45°: Round: Ø 450 mm Square: 420 x 420 mm Rectangle: 350 x 480 mm 30°: Round: Ø 350 mm Square: 330 x 330 mm Rectangle: 240 x 450 mm Redjvy Swiopfx Af Sock Incl. 2 short roller tracks. (not shown)