Used Hsm V-Press 605 for sale (62)

Condition: excellent (used), Technical data: Pressing force: 178 kN Drive power: 4 kW Work cycle time: 23 s Loading height: 928 mm Loading opening width x height: 1195 x 558 mm Credpfsv Akmzex Ac Hoi Bale length x width x height: 1200 x 780 x 1000 mm Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Machine weight: 1300 kg 4-fold with polyester tape Year 2010-2013

Year of construction: 2001, condition: good (used), HSM-500.1_VL PRESS PAPER PRESS FILM PRESS BALER ready to use good CONDITION used & good / see photos model: HSM 500.1 VL machine no. 6135.244.P serial no. 220109689 pressing pressure 50 tons V 400; Hz 50 KW 7,5 Csdpfxelc Du Ns Ac Hjri Amp. 15,5 Pressing force 6 tons Year of manufacture 2001 more presses in our other offers article used and good / roughly cleaned (plug in and go ) dimensions: on request !!! Other photos are for further use possibility. All items seen in photos also available from us. Price quotation net per piece for pickup from stock 47441 Moers current stock 1 piece Viewing is expressly offered. more technology in stock see photos or ask by phone General: We offer here from various acquisitions articles, which we describe as well as possible, as well as set meaningful photos. Further details about the article can not be made. We offer the possibility of Tuesday and Thursday in the time between 9 and 16 o'clock after telephone appointment to visit. If necessary, the article can be taken away immediately. Answers to this article we can offer due to time constraints only if you provide us with a phone number when you request. This offer, unless specifically described, is USED GOODS. Any packaging may be damaged. Items have been visually inspected and are as far as technically ok. All offers ex stock 47441 Moers. If you want shipping, please contact us to discuss packaging and shipping costs. Call with interest gladly by. all dimensions are approximate Errors in the description expressly reserved.

Condition: good (used), Year of construction: 1993, pressing force: 60 t, filling opening width: 1,050 mm, filling opening length: 1,500 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 500 kg, total length: 6,661 mm, overall weight: 12,000 kg, oil tank capacity: 800 l, year of last overhaul: 2023, Equipment: documentation/manual, HSM VK 6015 automatic channel baler I offer for sale a baler that worked for me for more than 4 years. Previously worked in a warehouse in DE, came to us in original condition. Currently dismantled, but it will be possible to start up before purchase. Optional equipment: Pre-crush flap, excess material knockout, oil cooling upgraded to a large radiator, cabinet and tank heating, wire end, bale binding sound. After disassembly replaced: Tying system (replaced all bearings, chains, sprockets, new tying heads upgraded to new HSM type, new needles) It is possible to purchase the machine with ascending belt feeder without channel. Crushing force: 600kN /. Unit pressing force: 106 N/cm² Csdpfeudzv Djx Ac Hjri Drive power: 50 kW Voltage / frequency: 400 V / 50 Hz Work cycle time: 17 s Year of manufacture 1993 Capacity when working with cardboard 3t/h at a density of 30kg/m3 187 m3/h Bale weight depending on material 400-550kg Depth x width of loading opening: 1020 x 1500mm Bale width x height x length: 1100 x 750 x 600-1200 mm Total length x width x height: 6661 x 3994 x 2583 mm Machine weight: 12 t Type of consumables: wire Pressed material: film, mixed paper, cardboard, die-cutting machine waste, Oil tank capacity of 800l

Condition: good (used), Year of construction: 2007, operating hours: 8,800 h, functionality: fully functional, pressing force: 24 t, filling opening width: 620 mm, filling opening length: 1,000 mm, bale length: 1,200 mm, bale width: 700 mm, bale height: 500 mm, bale weight: 200 kg, total width: 2,825 mm, total height: 1,940 mm, total length: 6,250 mm, input voltage: 400 V, power: 9.2 kW (12.51 HP), operating pressure: 220 bar, Presskraft: 240 kN Spezifische Presskraft: 64 N/cm² Antriebsleistung: 9,2 kW Spannung / Frequenz: 400 V / 50 Hz Taktzeit im Leerlauf: 17,2 s Pressleistung Leerlauf (theor.): 73 m³/h Breite der Einfüllöffnung x Länge der Einfüllöffnung: 620 x 1000 mm Ballenbreite x Ballenhöhe x Ballenlänge: 700 x 500 x 600-1200 mm Länge x Breite x Höhe: 6250 x 2825 x 1940 mm Gewicht: 4 t Art des Verbrauchsmaterials: Draht Pressgut: Folie, Gemischtes Papier, Kartonage, Stanzreste, PET Getränke und Aluminiumdosen,Weichverpackung Cedpsvq Rpljfx Ac Heri

Condition: good (used), - Large filling opening, ideal for large boxes - Container tipper for convenient filling Pressing force in kN: 400 Bale length: 1,100 mm Bale width: 750 mm Bale height: 750 mm Press length: 5,640 mm Press width: 1,674 mm Press height: 2,500 mm Weight: 4,450 kg - Motor power in kW: 9 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 350 kg - Manual binding: 3 times with wire Cjdpfxjv Amv Eo Ac Heri Year of manufacture: 2013 HSM HL 4010 LI baler - Large filling opening, ideal for large boxes - Container tipper for convenient filling Pressing force in kN: 400 - Motor power in kW: 9.5 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 350 kg - Manual binding: 3 times with wire Year of manufacture: 2012

Condition: ready for operation (used), Baler Hsm vk 42/1200 fully automatic Pressure force: 42 tons Crsdpfx Acera Nrxe Hei Beam dimensions: 700 x 800 x 600 - 1200 mm Beam weight: approx. 450 kg Press length approx. 7 meters press weight approx. 6000 kg tying 4 x wire automatically

Condition: ready for operation (used), Hsm V-Press 860 Baler, year of manufacture: 2005-2009, price: €5,600 Compression force: 54 kN Specific pressure: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening (W x H): 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Consumables: Wire Crsdpfx Acsra Rbgo Hoi Pressed material: film, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene Hsm V-Press 860 Plus Baler, year of manufacture: 2013-2015, price: €7,500 Hsm V-Press 860 L Baler, year of manufacture: 2015, price: €9,000 Hsm V-Press 860 Plus Baler, year of manufacture: 2019, price: €9,000 Hsm V-Press 860, ex-demo, year of manufacture: 2020, price: €13,000 Fourfold bale strapping with wire Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight (kg): approx. 500 kg Technical data: (L x W x H, mm): 1,213 x 1,824 x 2,987 Loading aperture (mm): 1,200 x 565 Cycle time (s): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) Hsm V-Press 860 Plus B Baler, year of manufacture: 2020, price: €14,000 Pressing force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Filling method: Manual Dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Weight: 2,336 kg Consumable type: Wire Pressable materials: film, cardboard Idle cycle time: 25 s

Condition: ready for operation (used), Hsm HL 4809 LI baler - Large filling opening, ideal for big boxes - Container tipper for convenient filling Pressing force in kN: 480 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg Cjdpfxsra Ddde Ac Heri - Bale dimensions (length x width x height in mm): 1200 x 1100 x 750 - Machine dimensions (length x width x height in mm): 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual tying: 4 times with wire

Condition: ready for operation (used), Baler Hsm 155 VL Bale dimensions L x W x H: 1100 x 700 x 700 - 950 mm Bale weight: 2000 - 250 kg (Cardboard) Technical data: Crsdpfxora Nrmo Ac Hoi L x W x H: 1470 x 940 x 2259 / 2439 mm Weight: 950 kg Pressure force 16 tons Power supply: 400 V (three phases) Motor power: 4 kW Bale ejector Hsm 155.1 VL baler pressure force 18 tons Price of Hsm 155.1 VL baler - 2600eur Hsm 155.2 vl baler pressure force 16 tons Price of hsm 155.2 vl baler - 2800eur

Condition: excellent (used), Baling press Hsm HL 4809 - Large filling opening, ideal for large boxes - Container tipper for convenient filling Power in kN: 480 - Motor in kW: 10.7 Crsdsv Ak Npepfx Ac Hoi - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions length x width x height in mm: 1200 x 1100 x 750 - Dimensions of the device length x width x height in mm: 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual tying: 4 times with wire Year 2015-2017 Complete baler, side housings unscrewed for transport Balers after inspection by an authorized service center

Condition: excellent (used), Manufacturer: HSM Model: VL 155.2 Dimensions (WxDxH): 1450 x 926 x 2400 mm Pressure: 16 t Credpjv Ai Tgofx Ac Hoi Filling opening: 1100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1100x700x950 mm Bale weight: 110 - 200 kg Connection: 400 V / 50 Hz Drive power: 4 kW Rated current: 8.5A Binding: 4-fold vertically Vertical capacity: 4 - 8 bales/hour Machine weight: 940 kg Year 2001-2005

Condition: excellent (used), Baler Hsm V-Press 825 plus Pressing force: 250 kN Drive power: 4 kW Cycle time: 39 s Codpfx Acsv Akcie Hsri Loading height: 958 mm Loading opening width x height: 1195 x 530 mm Bale length x width x height: 1200 x 780 x 700 mm Bale length x width x height: 1200 x 780 x 700 mm Machine width x depth x height: 1700 x 1046 x 2370 mm Machine weight: 1063 kg Type of consumables: strapping tape Compressed material: foil, mixed paper, cardboard, die-cutter waste, clothing Years 2012-2014 price 6000eur Baler Hsm V- Pres 825 pro 2019-2021 costs 9,000eur

Condition: excellent (used), Baler Hsm HL 4812 Pressing force: 480 kN Unitary pressing force: 58 N/cm² Drive power: 15 kW Voltage / frequency: 400 V / 50 Hz Working cycle time: 33.5 s Idle capacity (theor.): 95 m³/h Loading opening width x length: 1020 x 1250 mm Codpfsv Ak Dgox Ac Hjri Bale width x height x length: 1100 x 750 x 1200 mm Bale weight: 420 kg Total length x width x height: 5158 x 1642 x 2550 mm Machine weight: 5899 kg Type of consumables: wire Compressed material: foil, mixed paper, cardboard Year 2017 15kw engine

Condition: good (used), Manufacturer: HSM Tip: HL 4010 Re Codpfxsur N Huj Ac Hori Basket tilt arm missing,

Condition: defective spare-parts repository (used), Year of construction: 2013, Manufacturer: HSM Tip: HL 4010 Li Year of construction: 2013 Crjdpour Ravjfx Ac Hsi The equipment is incomplete and is sold as a part Fault: Hydraulic pump missing Control is missing Power supply unit missing

Condition: ready for operation (used), Year of construction: 2012, Brand: HSM Model: V-press 860 Crjdpfx Ajxt Nmwec Hji Year of manufacture: 2012 Pressing force: 418 kN Voltage: 400 Max. bale weight: 430 kg (depending on material) Bale dimensions: 120 x 110 x 85 cm Machine weight: 2,083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Filling opening: 120 cm x 65 cm x 85 cm Condition: Very good! Inspected for proper operation. FLITS Rental & Sales service: With every machine, we supply a bundle of tying wire (120 wires).

Condition: good (used), Year of construction: 2010, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale weight: 700 kg, overall weight: 33,000 kg, oil tank capacity: 2,000 l, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 FU Year of construction 2010 Operating hours approx. 40.000 hours, as of July 2025 Main press force 880 kN Specific pressing force 107 N/cm² Pressing force cutting edges free rammer 121 kN Dimensions of feed chute 990 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW, frequency-controlled Connected load 105 kW Total current consumption 200 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 500 up to 700 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 12,130 x 4,800 x 3.270 mm (l x w x h) Press dimensions with conveyor system 14,000 x 23,000 x 7,745 mm (l x w x h) Transport weight baler approx 33 t (Main press approx. 12 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition and is cleaned, lubricated and maintained by the operator on a weekly basis in accordance with the manufacturer's specifications. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2010 Belt speed 0,36 m/sec. Length feeding conveyor 7,000 mm Length elevating conveyor 13,905 mm Length goose neck 3,732 mm Grade 30° Nominal width 1,800 mm Effecting width 1,641 mm Height conveyor over all 7,745 mm Pit dimensions to conveyor belt 12,200 x 3,000 x 1,500 (l x w x h) Scope of delivery: The conveyor belt (without steel podium and maintenance platform), baling press, bale chute and wire drawing stations are for sale, without wire. The plant will remain in operation until March 2026, when it will be replaced by a new press line. Crsdpexr N Tbsfx Ac Hsi Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Baler Brand: HSM Type: HSM V-Press 1160 Press pressure: 532 kN Voltage: 3~400 Volt Credpfx Asw Dc Hzsc Hsi Year of construction: 2008 Motor power: 7.5 kW Current consumption: 15.5 A - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2007, power: 7 kW (9.52 HP), FOR SALE / FOR RENT: VERTICAL BALER! (Rental available in Lithuania, Latvia, Estonia, and Poland) Technical specifications: Manufacturer: HSM Model: HSM 500 VL Pressing force: 54–540 kN Bale size: 1200 x 800 x 1200 mm Bale weight: approx. 500 kg Codpfx Acjxuqkmo Hjri Max. bale size: approx. 1200 x 800 x 1200 mm (W x D x H) Press chamber dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Year of manufacture: 2005 PRICE ON REQUEST!

Condition: ready for operation (used), functionality: fully functional, Brand: HSM Model: VK 20/1200 Csdpoxnzf Ijfx Ac Hori Motor: 11 kW Final bale size: 700 x 800 mm Bale weight: 200–350 kg

Year of construction: 2012, condition: ready for operation (used), This HSM ABW-ROTA-2200 was manufactured in 2012. A used foil cutter featuring a cutting width of 2200 mm, it includes an IR preheating zone and a cooling unit. The semi-automatic roll change at the front and automatic stacking of sheets on pallets at the rear enhance its functionality. Consider the opportunity to buy this HSM ABW-ROTA-2200. Contact us for more information. Application Types Other Woodworking Machinery Cjdpfexirimox Ac Hsri

Condition: excellent (used), Year of construction: 2021, HSM Powerline FA 500.3 Large Capacity Document Shredder Destroy large volumes of data quickly and securely with the conveyor belt document shredder The HSM Powerline FA 500.3 large capacity document shredder offers high performance when destroying your sensitive data on paper, data storage media, and credit cards. The induction-hardened solid steel cutting shafts are extremely durable and come with a lifetime warranty. They are also resistant to staples and paper clips. An integrated oiler ensures consistently high cutting performance. The powerful chain-driven motor enables continuous use of the large capacity document shredder with a consistently high throughput. The cross-cut design increases the security level when destroying your data and reduces the volume of shredded material. In addition to its high technical performance, the HSM Powerline FA 500.3 large capacity document shredder is characterized by its user-friendliness. The membrane keypad with LED display makes it easy to operate the device and view its operating status. The material is conveniently fed via the conveyor belt. The automatic rewind function eliminates paper jams and ensures a smooth workflow. Codpjxm Sx Ajfx Ac Hjri The integrated light barrier starts the device automatically and shuts it down again after the paper has been fed. The emergency stop button guarantees maximum user safety. A retractable trolley for easy removal of the internal reusable collection bag (capacity 530 l) simplifies the disposal of shredded material. Thanks to the integrated casters with locking brakes and its compact design, the large document shredder requires little space and is also mobile. HSM Conveyor Belt Shredder POWERLINE FA 500.3, Cross Cut 3.9 x 40 mm with Storage Table Cutting Shafts Made of Hardened Solid Steel Powerful Motor Enables Continuous Operation Automatic Rewind Eliminates Paper Jams Convenient Material Feeding via Conveyor Belt Emergency Stop Switch Ensures User Safety Automatic Oiler for Consistently High Cutting Performance Multifunctional Element for Intuitive Operation Mobile on Casters Working Width: 500 mm Collection Capacity: 530 Liters Equipment: With Storage Table and Conveyor Belt Features: Mobile Cutting Speed: 210 mm/s Cutting Capacity in Sheets 80g/m²: 180-200 Sheets Cutting Capacity in Sheets 70g/m²: 200-240 Sheets Material to Shred: Data Storage Media, Paper, Continuous Forms, Crumpled Paper, Credit Cards, File Folders CD/DVD, Staples, and Paper Clips Segment: Professional Security Level (DIN 66399): O-3, P-4, E-3, T-4, F-1 Security Level (DIN 32757) 3 Voltage: 400 V Frequency: 50 Hz Drive Power: 7.5 kW Sound Pressure Level: 75 dB(A) Depth: 1797 mm Width: 1168 mm Height: 1792 mm Cutting Type: Particle Particle Length: 40 mm Cutting Width: 3.9 mm Product Type: Industrial Paper Shredder Color: Anthracite Light Gray Weight: 790 kg W x H x D 1168 x 1792 x 1797 mm Year of Manufacture: May 2021 Manufacturer Price: €24,750 Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2012, operating hours: 12,078 h, functionality: fully functional, pressing force: 88 t, filling opening width: 1,100 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 30,000 kg, oil tank capacity: 2,000 l, power: 98 kW (133.24 HP), volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2012 Total operating hours: 12,078 hours, as of September 2025 Pump operating hours 6,616 hours (effective pump running time) Number of bales pressed: 65,792 bales, as of September 2025 Main press force 880 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 120 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 98 kW Total current consumption 192 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 18,000 x 4,300 x 3.270 mm (l x w x h) Press dimensions with conveyor system 18,000 x 22,000 x 5,765 mm (l x w x h) Transport weight baler approx 30 t (Main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2012 Drive power 7.5 kW Belt speed 0.05 – 0.4 m/second Length of feeding conveyor 6,000 mm Height of side wall from feeding conveyor 400 mm Length of incline conveyor 9,000 mm Height of side wall from incline conveyor 800 mm Length of gooseneck 1,500 mm Incline 30° Nominal width 1,800 mm Useful width 1,700 mm Belt quality EP-500/4 Steel cleats on the rubber belt 50 x 50 mm Hollow pin chain, pitch 125 mm, rollers 36 mm Height of drive axle above ground 4,284 mm Overall height of conveyor belt 5,765 mm Transport dimensions of feeding conveyor approx. 7,000 x 2,200 x 1,250 mm (l x w x h) Transport dimensions of the incline conveyor 13,000 x 2,500 x 2,900 mm (l x w x h) Pit dimensions for the conveyor belt 14,765 x 3,260 x 1,250 (l x w x h) Scope of delivery: Crjdpoxcngnefx Ac Hsi The conveyor belt, baling press with bale chute, and wire drawing stations are available for sale, but without the wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1991, power: 3 kW (4.08 HP), For sale or rent! We are selling an HSM 155VL vertical baler. Manufacturer: HSM Model: 155VL Year of manufacture: 1991 Motor power: 3.5 kW Codsxuqhxepfx Ac Heri

Condition: used, Year of construction: 2007, power: 7 kW (9.52 HP), VERTICAL BALER FOR SALE OR RENT! (Rental available in Lithuania, Latvia, Estonia, and Poland)! Technical Information: Manufacturer: HSM Credpfxjxuqfqe Ac Hsi Model: HSM 500 VL Pressing Force: 54–540 kN Bale Size: 1200 x 800 x 1200 mm Bale Weight: approx. 500 kg Maximum Bale Size: approx. 1200 x 800 x 1200 mm (W x D x H) Press Chamber Dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Year of Manufacture: 2005 PRICE ON REQUEST!