Bale press

HSM VK 42 Automat

Condition: ready for operation (used), Logintake with butt end reducer and debarker. Below parts included: - Log deck with log unscrambler and log singulator - Butt-end reducer type Bruks RR1000 - Debarker type cambio 70-66 Iasdpfstrd Hfsx Af Uot - Out-feed log conveyor with logkicker

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Pressing force: 60 t Bale weight (depending on material): 350–600 kg Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Iaedpfjv Amw Nox Af Ust Pressing/cycle time: 13/24 s Machine weight: 7000 kg

Condition: defective spare-parts repository (used), Year of construction: 2013, Manufacturer: HSM Iaedpfx Afour Ravs Uet Tip: HL 4010 Li Year of construction: 2013 The equipment is incomplete and is sold as a part Fault: Hydraulic pump missing Control is missing Power supply unit missing

Condition: defective spare-parts repository (used), functionality: not functional, Year of construction: 1972, * Former Berlin Fire Department truck. Ijdpfxswlqzcs Af Ueat * MAN 450 HD-L. Built in 1972. Registration card available. * Engine - Frost damage. Spare engine available.

Condition: used, functionality: fully functional, Dear Sir or Madam, On behalf of a customer, we are selling a Unimog U1550L expedition vehicle with top-of-the-line equipment and in good condition. Vehicle data: Mileage: 318,533 Year of manufacture: 2002 Total weight: 7,500-8,500 kg depending on load Engine: 176 kW/240 HP Euro 2 Vehicle equipment: -4-chamber fuel tank system for 560 L diesel -Tire pressure control system -Navigation system -32 gears (16 forward and 16 reverse, crawler gears) -Quadruple immobilizer -GRP 6-10 cm thick -Water and dustproof for temperatures from -40°C to +40°C -Solar panels on the roof -310 L drinking water tank -22 L hot water heat exchanger -80 L waste water tank -Tow bar -Sand guards -Outdoor shower and water tap -Cable winch front and rear -Cow Bar -Halogen headlights -Air conditioning -Pneumatically suspended Recaro seats (adjustable, heated, ventilated) -3rd seat -and much more Equipment inside: Kitchen: Iaedpfxswm Ig Sj Af Ujt -Refrigerator with freezer compartment -Sink with hot and cold water -3-burner propane stove -Oven -Storage compartments Bed: -For 2 people -Storage options -LED reading light Cabinets: -With wall mirror -Storage space for clothes and laundry -Storage space for groceries Bathroom/WC: -Porcelain toilet with flushing function -Sink -Mirrored cabinet -Hot/cold shower -Shower vent with mosquito net -12/24/220 V connection -2nd Bench seat (can be converted into a third bed) - 310L drinking water tank - 22-liter hot water heat exchanger - 80L waste water tank - Drinking water filter system and much more. If you have any questions, please do not hesitate to contact us! Our business hours: Mon-Thurs: 7:00 a.m. - 3:30 p.m. Fri: 7:00 a.m. - 3:00 p.m. If you have any further questions, please do not hesitate to contact me. For viewings and/or test drives, please make an appointment in advance!!! Vehicles/equipment are not always available on site. We are selling this vehicle on behalf of the owner. This is a private sale and therefore excludes any warranty or guarantee.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1234, input voltage: 380 V, input frequency: 50 Hz, Codix nailer fully rebuilt in Sophograf France 2 years ago. The machine is now setup to make doubleside stringpallets Isdpfxev Hh Hae Af Ueat

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Iaodpfx Aoviwdmjf Uot Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: new, How does it work? Iodpfx Afewdurpo Ueat The magazine is manually fed with deck boards and stringer boards, then the machine automatically organizes the decks in the right position for nailing. The machine is constructed for continuous and reliable production of pallets. It combines professional precision with a user-friendly setup. The size of the manufactured pallets can be easily readjusted in just a few minutes. Deck Size: Min / max length: 600 mm - 1 600 mm Min / max width: 600 mm - 1 400 mm Stringer Min / max length: 600 mm - 1 400 mm Min / max width: 75 mm - 150 mm Min / max thickness: 16 mm - 28 mm Min / max wing: -20mm - +50mm Deck board Min / max length: 600 mm - 1 600 mm Min / max width: 75 mm - 150 mm Min / max Thickness: 16mm - 28mm Specifications: Operators | 1 Length | 4,0 m Width I 3 m excluding platform ladder Height | 3,6 m Power | Electric: 14 kW, 3x400 V+N, Hydraulic: 22 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 400L/min Should be filled and controlled | Container for lubricating oil Machine capacity | 24 deck boards/min Standard equipment: 2 cassettes for deck boards 3 channels for stringer feeding 3 cassettes for stringer 1 mechanical clinching plate Nailing system: Electric or hydraulic beam nailing, 1 nail box (9 nails), Individual nail picking, nail indication system, 9 nailing hammerheads Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF500LH is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 500 kg. Due to the compact design and low height this baler is perfect for rooms with limited ceiling heights. The waste baler impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 500 kg (material depending) Bale size: 1100 H (var.) x 1400 W x 800 D mm Machine size: 2249 H x 2041 W x 1350 D mm Machine weight: 2100 kg Transport height: 2249 mm Loading aperture: 1400 W x 680 H mm Cycle times: 35 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Auto control panel with bale full light and E-stop with locking key Strap eject for easy removal of bales Retainer for reducing the material spring back Low height, perfect for limited ceiling heights Hour counter Reel holder for 6 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Cans and PET bottles Light valuable materials Iodpfx Afsva Ekvs Ujat Optional extras Machine colour RAL Strapping rolls Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: excellent (used), Year of construction: 2003, Hess RH 1500 Year 2003 Pallet size: 1400 x 950 mm, extendable to 1100 mm. With surface mixing, automatic opening/closing via remote control, machine in as-new condition. 2 Hess lifts with height for 18 levels, single pallet Hess pallet truck, single pallet, laser positioning. 14 Rotho curing chambers, good condition Hess cuber with 4-sided clamp. Plate conveyor, approx. 25 m long. Pallet turner, pallet brush. Siemens S7 control system. 7-mould block Iajdpfx Aexza Hqjf Ust 1500 Assyx pallets Ridder horizontal strapping machine.