Used Hsm Mkp 180 for sale (61)

Condition: used, Year of construction: 2012, operating hours: 11,850 h, pressing force: 88 t, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), For sale used baler + used conveyor brand: HSM VK 88 + Stadler KF1800 Baler is VK 88 R – FU, Frequency drives, 2 x 45 kw. * Unblocking cylinder option * Ball joint fixing main ram cylinder * Stadler conveyor 1600 mm internal Year 2012 11850 hours Rod main cylinder and seals kit new. To be replaced : 2 front chamber floor section : middle and front to the channel Greasing / changing: Few sides diabolos are used and running, some rusty, some in good condition. Baler is running good and bales tying is ok Ram wheels OK Ram side wheels OK Kodpeyuyg Sjfx Achelw Rod main cylinder : almost new Main cylinder seals kit : almost new Ram sides nylon strips : 80 – 90 % good. Finetune the geometry adding spacers ( customer has parts on stock) Knife/ counter knife : good, 70% Needles wheels : ok but change is preferred + the closing plates Main frequency drive 1 of 2 : in total 2 x 45 kW : one is out of order. I don’t know if it will be changed or not. Baler is running on one pump. Side walls chamber : Side walls are worn out where the nylon guiding plate are sliding : few millimeters up to 2 mm average. Conveyor : Chain rollers are used with a bit of play. Greasing is missing but still good condition. Guiding strips are ok Feeding cleats are worn out, almost all. Start/stop with frequency drive. Side walls ok on incline part and in pit. Wire coils platform : Not included.

Condition: excellent (used), Paper padding machine Cardboard perforator Type HSM Profipack C 400 Output: 50 kg per hour Cutting speed: 135 mm/s Cutting width: 415 mm Motor: 220 volts / 625 watts Infeed height: 10 mm Kodpfx Acozk Di Iohjlw Transport dimensions: Width: 610 mm Depth: 370 mm Height: 370 mm Weight: 47 kg

Condition: good (used), Year of construction: 2021, operating hours: 7 h, functionality: fully functional, Vertical baling press HSM V-Press 860 plus, year of manufacture 2021 Kledpfxszk Diuj Achow Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 7 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offers are subject to change, prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale takes place from our location, without any warranty. Our payment terms are 100% advance payment.

Condition: good (used), Year of construction: 2021, operating hours: 423 h, functionality: fully functional, Vertical baling press HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 423 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Kjdpfx Acjzk Dcuehelw Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: good (used), Year of construction: 2021, operating hours: 450 h, functionality: fully functional, Vertical Baler HSM V-Press 860 plus, Year of Manufacture: 2021 Technical Data: Manufacturer: HSM Model: V-Press 860 plus Year of Manufacture: 2021 Operating Hours: 450 Pressing Force: 60 t Drive Power: 4 kW Feed Opening: 1195 x 645 mm Filling Height: 1114 mm Bale Size: approx. 1200 x 1200 x 780 mm Bale Weight: 480 kg Binding: manual Kjdezk Dagopfx Achelw Theoretical Cycle Time (idle): 25 s Theoretical Throughput: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, Paper, Cardboard Comment: The baler is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on the manufacturer's information. We accept no liability for the accuracy of the information provided or for any possible errors. Offers are subject to change without notice, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment condition is 100% advance payment.

Condition: good (used), Year of construction: 2021, operating hours: 245 h, functionality: fully functional, HSM V-Press 860 plus vertical baling press, year of manufacture 2021 Ksdpfozk An Nox Achjlw Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 245 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any possible errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale takes place at our location, without warranty. Our payment terms are 100% prepayment.

Condition: excellent (used), Year of construction: 2019, operating hours: 119 h, functionality: fully functional, Vertical baler HSM V-Press 860 plus B, year of manufacture 2019 Technical data: Manufacturer: HSM Model: V-Press 860 plus B Year of manufacture: 2019 Operating hours: 119 Pressing force: 60 t Drive power: 4 kW Feeding opening: 1500 x 651 mm Feeding height: 1129 mm Bale size: approx. 1500 x 1200 x 780 mm Bale weight: 550 kg Tying: manual Theoretical cycle time (idle): 25 s Theoretical pressing capacity: 32.5 m³/h Dimensions: 2099 x 1245 x 2985 mm (W x D x H) Weight: 2340 kg Materials: film, paper, cardboard Kodezk Amlopfx Achjlw Note: The baler is in very good condition. Please note: All technical data is based on manufacturer's information. We assume no liability for the details provided or any possible errors. All offers are subject to change, prior sale reserved, and may be withdrawn at any time. Viewings are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment term is 100% advance payment.

Condition: ready for operation (used), Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Year of manufacture: 2012 Kledpfox D U N Ssx Achow

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: Kodpfxeygud Aj Achjlw - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Condition: defective spare-parts repository (used), Year of construction: 2013, Manufacturer: HSM Tip: HL 4010 Li Year of construction: 2013 Kledpfx Aceur Ravohsw The equipment is incomplete and is sold as a part Fault: Hydraulic pump missing Control is missing Power supply unit missing

Condition: used, Year of construction: 2013, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Re Year of manufacture: 2015 Pressing force: 40 t Kodpfx Acjyq Ngtshslw

Condition: ready for operation (used), Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2015 Kledpjyhbxcefx Achew Pressing force: 40 t

Condition: used, Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Re Kledjyibv Ispfx Achew Year of manufacture: 2015 Pressing force: 40 t

Condition: used, Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Li Ksdpfx Ajx H R U Sschelw Year of manufacture: 2012 Pressing force: 40 t

Condition: good (used), Year of construction: 2018, functionality: fully functional, Available from the end of August 2026 HSM VK 4812P baling press, year of manufacture 2018, without hopper Klodpfjzkgyijx Achjw Manufacturer: HSM Type: VK 4812P Year of manufacture: 2018 Pressing force: 48 t Drive power: 22 kW Total power: 27 kW Feed opening: 1020 x 1250 mm (W x L) Capacity: 50 kg/m³: 7.5 t/h Bale size: 1,100 x 750 x 600-1200 mm Bale weight: 300-550 kg Tying: 4-wire, automatic Transport dimensions: approx. 7,530 x 2,400 x 2,400 mm (L x W x H) Weight: approx. 10,000 kg Materials: PET bottles, cardboard, paper, film An operating manual and EC declaration of conformity are available in German. Note: The machine is currently still in use and can be inspected by appointment. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, prior sale, and may be withdrawn at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: ready for operation (used), Year of construction: 2012, Brand: HSM Type: V-press 860 plus Year of manufacture: 2012 Pressing force: 418 kN Voltage: 400 Max. bale weight: 480 kg (depending on the material) Bale dimensions: 120 x 120 x 78 cm Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Kljdpfx Acszmhy Nohow Feed opening dimensions: 120 cm x 65 cm Video available upon request.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 60 t, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Kledpfx Acozmwg Eohow We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 530001846, pressing force: 70 t, filling opening width: 1,020 mm, filling opening length: 900 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 600 kg, total width: 2,060 mm, total height: 2,394 mm, total length: 5,992 mm, type of input current: three-phase, input voltage: 400 V, input current: 19 A, overall weight: 7,500 kg, warranty duration: 3 months, noise level: 70 dB, pressure: 58 bar, transport height: 2,400 mm, pressure (max.): 70 bar, opening width: 1,020 mm, empty load weight: 7,500 kg, year of last overhaul: 2026, volume flow: 43 m³/h, operating pressure: 70 bar, transport width: 2,066 mm, transport length: 5,992 mm, protection type (IP code): IP54, input frequency: 50 Hz, tank capacity: 123 l, stroke length: 1,500 mm, Equipment: documentation/manual, FOR SALE: HSM HL 7009 Li hydraulic baling press Kodpfxjzmu Umj Achelw Manufacturer: HSM Pressen GmbH, Germany Single-chamber horizontal baling press for waste, used Suitable for compacting/baling paper, plastics, PET bottles, municipal waste, etc. In the case of paper, suitable for logistical packaging for paper mills = waste valorization Pressing force: 70 tons (compaction ratio approx. 6:1) Motor: 11 kW, 3x400 V Overall dimensions of the machine/press: 580 × 290 × 300 cm (L × W × H) Bale dimensions: 120 × 110 × 110 cm (L × W × H), 1.5 m3, 650 kg, 1 bale = 1 pallet Bales can be stacked on top of each other Automatic bale ejection system onto pallets Easy bale tying with 4 strands of iron wire Machine/press weight: 7400 kg Year of manufacture: 2017 Both left-hand and right-hand models are available for optimal placement in the facility. The machine has been inspected and serviced, is leak-free, regularly maintained, and ready for use. 3-month warranty. Invoice provided, price excludes VAT. Transport: - Loading included in the price - Personal collection at Moravec 41, Žďár nad Sázavou district - Alternatively, truck transport can be arranged.

Condition: excellent (used), Year of construction: 2006, 103 USED HSM FA 400.2 industrial shredder in very good condition. One of the narrowest models in this class of industrial shredders. In addition to paper, it also shreds plastic cards, CDs, flash drives, and floppy disks. Thanks to its robust construction, the device is characterized by high efficiency and a long service life. The material for shredding is fed from the infeed table using an electrically driven belt conveyor. Continuous operation and reverse buttons. Automatic stop when the waste container is removed or full. Automatic reverse in the event of a paper jam. The standard equipment includes a 460-liter mobile cart and a front shelf. Technical features: hardened, single-piece steel cutting rollers, an extremely powerful and energy-efficient motor designed for long, uninterrupted operation, and thermal protection. TECHNICAL DATA: Number of sheets shredded per pass (70g/m²): 130 Number of sheets shredded per pass (80g/m²): 104 Cutting width: 5.8 mm. Entry width (mm): 428 Motor power: 4000 Dimensions (H x L x W): 1650 x 1568 x 1157 Ksdpfsw Axdmex Achelw WEIGHT (kg): 425

Condition: ready for operation (used), Year of construction: 2009, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2009 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening: 119.5 x 65 cm Condition: very good! Ksdpfszkp E Isx Achelw Video of machine in operation available on request.

Condition: ready for operation (used), Year of construction: 2015, Make: HSM Model: V-press 860 plus Year of manufacture: 2015 Press force: 418 kN Voltage: 400 Max. bale weight: 480 kg (depending on the material) Bale dimensions: 120 x 120 x 78 cm Ksdpfx Aszkh Twechslw Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Feed opening dimensions: 120 cm x 65 cm Video of the machine in operation available upon request. Fast delivery possible.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 60 t, input voltage: 400 V, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Klodozl A D Hepfx Achjw Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Kjdpfx Acszl Axkehelw Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Klsdozh Eztspfx Achsw Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening: 119.5 x 65 cm Condition: very good! Video of the machine in operation available on request. Transport also possible.

Condition: ready for operation (used), Pressing force: approx. 700 kN (approx. 70 tons) Motor power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Single bale weight: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m in length, 2.5 m in width, approx. 2.6 m in height Machine weight: approx. 7 tons Cycle time: approx. 45–47 s Construction features large feed opening for cardboard possibility of automatic feeding (e.g., via conveyor) manual wire tying (4 wires) pallet lock and hydraulic doors for bale removal Advantages of this press large bales = fewer transports high pressing force suitable for continuous operation Kjdera Dddepfx Acholw Available production years: 2018–2020