Used Hsm V-Press 860 S/P for sale (58)

Condition: good (used), Year of construction: 2011, functionality: fully functional, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Fpsdjttaytepfx Af Doc Dimensions 1,797 x 1,062 x 2,985 mm Bodhzadl7zw The weight of the equipment is 2,030 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Fpjdpfsttal Asx Af Dec Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm The weight of the equipment is 2,030 kg

Condition: good (used), Year of construction: 2013, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm Bodhzadl7zw Fodpfjttav Nox Af Djpc The weight of the equipment is 2,030 kg

Condition: good (used), Year of construction: 2016, functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016 Fedpfx Ajx Irw Ref Dopc Technical Data: Manufacturer: HSM Model: V-Press 1160 plus Year of manufacture: 2016 Pressing force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Feed opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (W x D x H) Weight: 2430 kg Materials: Paper, cardboard, film The baler is in good condition. Operator's manual and CE declaration are available. Inspection can be arranged at any time, including under power. Upon request, we can also carry out test runs with your material for a handling fee. We are happy to answer your questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays we are available from 08:00 to 13:00. Please note: All technical data are based on the manufacturer's information. We do not assume liability for the given data or possible errors. Offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: used, Year of construction: 2012, pressing force: 4 t, HSM V-Press 504 waste paper baler - used The HSM V-Press 504 vertical baler is a compact yet extremely efficient device designed for pressing cardboard and plastic waste. Thanks to its robust construction, simple operation, and modern control system, this model is the ideal solution for manufacturing companies, warehouses, stores, and logistics centers where significant amounts of packaging waste are generated every day. The baler, manufactured by the German brand HSM, ensures reliable operation and a long service life. Key advantages of the waste paper baler: 40 kN crushing force – effective waste compression, reducing volume by up to 95%. Efficiency and ergonomics – the crushing process starts automatically when the door is closed, and the piston returns to its starting position automatically. Modern control system – a microprocessor with a membrane keyboard and graphic text display ensures easy monitoring of the work process. Double door with lever – safe and convenient operation even with intensive use. Compact bales up to 60 kg – facilitate transport and storage of processed waste. Integrated bale ejector – increases operator safety and comfort. Energy-efficient operation – 1.1 kW motor allows for full functionality with low energy consumption. Stable, durable construction – guarantees reliability over a long service life. The offer applies to the HSM V-Press 605 waste paper baler: • Product code: MTP006524 • Product condition: used • Year of manufacture: 2012 • Model: V-Press 504 • Width: 102 cm • Depth: 81.5 cm • Height: 193 cm • Weight: 290 kg • Power: 1100 W • Voltage: 230 V Net price: €2,859.00 per unit * I have large quantities available, with the possibility of negotiating the price for larger orders. * Transport possible throughout Europe. Fpedpfoyim Aysx Af Djc * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 cm x 65 cm Condition: Very good! Checked for proper operation. FLITS Rental & Sales service: With every machine, we supply a bundle of baling wire (120 wires). Need additional bundles of baling wire? Request a no-obligation quote. At FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure that you quickly get the right machine. You are welcome to inspect the machines on site. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. A visit is possible by appointment, so that we have ample time to inform you properly and show you the right machines. Fjdpfx Afjyfnfko Djpc We are happy to assist you! Waste baler, paper baler, cardboard baler, plastic baler, waste compactor, recycling, textile baler, waste processing.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 60 t, input voltage: 400 V, bale weight: 550 kg, overall weight: 2,500 kg, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Fpsdpfxjyfgp Ij Af Dsc Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Press force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Fsdpfxoyap I Aj Af Djpc Filling opening size: 119.5 cm × 65 cm Condition: Very good! Inspected and fully functional. FLITS Rental & Sales service: with every machine, we supply one bundle of tying wire (120 wires). Need more bundles of tying wire? Request a non-binding quote. At FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are warmly welcome to view the machines at our location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, allowing us ample time to inform you properly and show you the most suitable machines. We are happy to assist you! Waste baler | Paper baler | Cardboard baler | Plastic baler | Waste compactor | Recycling | Textile baler | Waste processing

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 x 65 cm Condition: Very good! Functionality checked. Fpjdpjx Tznvjfx Af Doc FLITS Rental & Sales service: We supply a bundle of binding wire (120 wires) with every machine. Do you need more bundles of binding wire? Please request a no-obligation quote. At FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you have the right machine available quickly. You are very welcome to view the machines on site. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment so that we have ample time to provide you with comprehensive information and show you the right machines. We are happy to assist you further! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 60 t, input voltage: 400 V, bale weight: 550 kg, overall weight: 2,500 kg, Used HSM V-Press 1160 Plus vertical press from 2016. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Fjdpeybcahofx Af Djpc Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: ready for operation (used), Year of construction: 2009, Brand: HSM Fpjdpex Rybpefx Af Djc Model: V-Press 1160 plus Year of manufacture: 2009 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Dimensions of the machine: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 cm × 65 cm Condition: Excellent! Functionally tested. FLITS Rental & Sales service: With every machine, we provide one bundle of binding wire (120 wires). Need more binding wire bundles? Request a free quote without obligation. At FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you receive the right machine quickly. You are very welcome to view the machines at our location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, so we can take all the time needed to inform you properly and show you the right machines. We are happy to assist you! Waste press • Paper baler • Cardboard baler • Plastic baler • Waste compactor • Recycling • Textile baler • Waste • Waste processing

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1003203664, Four pieces HSM V-PRESS 1160 & one piece DIXI 60S slightly used the price is per piece Fsdpfxeul Uhke Af Dspc

Condition: ready for operation (used), Model: HSM V-Press 1160 Plus Baler Fsdpfx Afjra Nyuj Dopc Pressing force (kN): 532 Output (bales/h): 1–2 Max. bale size (mm): 1200x1100x1000–1200 Dimensions (L x W x H) (mm): 1780x1150x2985 Power (kW): 7.5 Year 2007–2008 price €5,500 year 2009–2010 price €5,800 year 2011–2013 price €6,300 We also offer HSM V-Press 1160 Max balers, year 2014–2015 Weight (kg): 2,300 ALSO AVAILABLE: 2017–2018 models – €7,500

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: Fpjdpfx Aovtpq Hsf Djc The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: ready for operation (used), HSM V-Press 860 Baler, year 2008-2009, price: €5,800 Pressing force: 54 kN Specific pressure: 63.46 N/cm² Drive motor power: 7.5 kW Cycle time: 25 s Loading height: 1110 mm Loading aperture (W x H): 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 780 x 1200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm Fjdpfx Ajra Rbgjf Dopc Machine weight: 2008 kg Binding material: wire Pressed materials: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 Plus, year 2013-2015, price: €7,500 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 Plus, year 2019, price: €9,000 HSM V-Press 860, brand new, ex-display, year 2020, price: €13,000 Bale binding: 4-fold wire tying Bale dimensions (L x W x H, mm): 1200 x 800 x 1000 - 1200 Bale weight (approx.): 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Filling aperture (mm): 1200 x 565 Cycle time (seconds): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 Plus B, year 2020, price: €14,000 Press force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Filling opening (W x H): 1500 x 651 mm Bale size (L x W x H): 1500 x 780 x 1200 mm Bale weight: 550 kg Loading type: manual Machine dimensions (W x D x H): 2099 x 1245 x 2985 mm Machine weight: 2336 kg Binding material: wire Suitable materials: foil, cardboard Idle cycle time: 25 s

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Fpodpsygud Aefx Af Dec Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, pressing force: 42 t, bale length: 1,200 mm, bale width: 1,200 mm, bale height: 750 mm, Equipment: documentation/manual, HSM VK 4812 P Year of production: 2017 Fully automatic baler. The device has service and maintenance work by an authorized HSM service with a branch in Germany. The baler comes complete with a ramp for ejection of finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage / frequency: 400 V / 50 Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Fpodpfxeyg D Dfs Af Dec Total length x width x height: 6661 x 3994 x 2583 Machine weight: 10.2 t Compressed material: foil, mixed paper, cardboard, die-cutter waste Bale tying: 4-fold with wire We also have other presses in stock. Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: excellent (used), Model: HSM V-press 1160 plus baler Pressing force (kN): 59 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dimensions (L x W x H, mm): 1780x1150x2985 Power (kW): 4kW Weight (kg): 2300 Fpsdpfsv Al Tiox Af Dec Year of manufacture: 2018-2019

Condition: good (used), Year of construction: 2012, operating hours: 12,078 h, functionality: fully functional, pressing force: 88 t, filling opening width: 1,100 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 30,000 kg, oil tank capacity: 2,000 l, power: 98 kW (133.24 HP), volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2012 Total operating hours: 12,078 hours, as of September 2025 Pump operating hours 6,616 hours (effective pump running time) Number of bales pressed: 65,792 bales, as of September 2025 Main press force 880 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 120 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 98 kW Total current consumption 192 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 18,000 x 4,300 x 3.270 mm (l x w x h) Press dimensions with conveyor system 18,000 x 22,000 x 5,765 mm (l x w x h) Transport weight baler approx 30 t (Main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Fpodpfjxcngnsx Af Dsc Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2012 Drive power 7.5 kW Belt speed 0.05 – 0.4 m/second Length of feeding conveyor 6,000 mm Height of side wall from feeding conveyor 400 mm Length of incline conveyor 9,000 mm Height of side wall from incline conveyor 800 mm Length of gooseneck 1,500 mm Incline 30° Nominal width 1,800 mm Useful width 1,700 mm Belt quality EP-500/4 Steel cleats on the rubber belt 50 x 50 mm Hollow pin chain, pitch 125 mm, rollers 36 mm Height of drive axle above ground 4,284 mm Overall height of conveyor belt 5,765 mm Transport dimensions of feeding conveyor approx. 7,000 x 2,200 x 1,250 mm (l x w x h) Transport dimensions of the incline conveyor 13,000 x 2,500 x 2,900 mm (l x w x h) Pit dimensions for the conveyor belt 14,765 x 3,260 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, baling press with bale chute, and wire drawing stations are available for sale, but without the wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2007, power: 7 kW (9.52 HP), FOR SALE / FOR RENT: VERTICAL BALER! (Rental available in Lithuania, Latvia, Estonia, and Poland) Technical specifications: Manufacturer: HSM Fpsdpjxuqkmsfx Af Doc Model: HSM 500 VL Pressing force: 54–540 kN Bale size: 1200 x 800 x 1200 mm Bale weight: approx. 500 kg Max. bale size: approx. 1200 x 800 x 1200 mm (W x D x H) Press chamber dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Year of manufacture: 2005 PRICE ON REQUEST!

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Technical data Fedpfx Afewrrhqj Dspc - motor power 11.5 kW - voltage / frequency 3 x 400 V / 50 Hz - type of cutting of the cutting - cutting width 3.9 mm - cutting length 40 mm - safety level (DIN 66399 ISO/IEC 21964 P-4/O-3/T-4/E-3/F-1 - cutting capacity in sheets 80g/m 180 - 200 - capacity in kg/h Approx. 340 kg/h - cutting speed 210 mm/s Input slot width 500 mm Crushing force 85 kN Noise level (idle) Ca. 65 dB(A) weight 1660 kg Dimensions (W x D x H) 1267 x 3281 x 1795 mm Bale weight 40 - 90 kg Bale dimensions 500 x 500 x 400-950 mm Tying method Manual, horizontal, tape

Condition: excellent (used), Technical data: Pressing force: 178 kN Drive power: 4 kW Work cycle time: 23 s Loading height: 928 mm Loading opening width x height: 1195 x 558 mm Bale length x width x height: 1200 x 780 x 1000 mm Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Machine weight: 1300 kg 4-fold with polyester tape Year 2010-2013 Fjdpfxev Akmzj Af Dspc

Condition: excellent (used), Baler Hsm V-Press 825 plus Pressing force: 250 kN Fpjdpjv Akcijfx Af Dsc Drive power: 4 kW Cycle time: 39 s Loading height: 958 mm Loading opening width x height: 1195 x 530 mm Bale length x width x height: 1200 x 780 x 700 mm Bale length x width x height: 1200 x 780 x 700 mm Machine width x depth x height: 1700 x 1046 x 2370 mm Machine weight: 1063 kg Type of consumables: strapping tape Compressed material: foil, mixed paper, cardboard, die-cutter waste, clothing Years 2012-2014 price 6000eur Baler Hsm V- Pres 825 pro 2019-2021 costs 9,000eur

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Model: V-press 860 plus Year of manufacture: 2013 Pressing force: 418 kN Voltage: 400 V Max. bale weight: 430 kg (depending on material) Bale dimensions: 120 x 110 x 85 cm Machine weight: 2,083 kg Fpedpfxsyc Sats Af Doc Machine dimensions: 180 cm x 125 cm x 298.5 cm Filling opening dimensions: 120 cm x 65 cm x 85 cm Condition: very good! Functionality checked. FLITS Rental & Sales service: Each machine comes with a bundle of tying wire (120 wires). Need more bundles of tying wire? Request a free quote.

Condition: good (used), Year of construction: 1999, pressing force: 54 t, input voltage: 400 V, power: 4 kW (5.44 HP), input frequency: 50 Hz, Specifications: – Brand: HSM – Model: 500.1 VL – Year of manufacture: 1999 – Pressing force: 54 tons – Voltage: 400 V – Frequency: 50 Hz – Power: 4 kW – Serial number: 200100252 The machine is located in Zaandam (Netherlands). Fjdpoygl H Ujfx Af Djpc Inspection and testing under power possible by appointment. Transport cannot be arranged by us. The machine was left behind when we purchased our company premises and was previously used by the former owner for cardboard/paper. We have not made structural use of the press ourselves. The press is complete, operational, and immediately ready for use. Just connect and operate. Errors in the description expressly reserved.