Used Barford Sx 2000 for sale (10,190)

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 828D - ShopTurn, _____ Description: Year of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 395 mm Turning length : 450 mm Mainspindle: Technology:Belt-driven spindle Speed:4.500 rpm Power (max.):20 kW Torque (max.):169 Nm Bar capacity:67 mm Workpiececlamping:3-Jaw chuck, Samchully MH-208 BVI Subspindle: Technology:Turret with 12 stations Taper:BMT55 Tooldive:5.000 rpm, 9,3 kW, 44 Nm Movement in X/Y/Z:235/105/580 mm Rapid travers in X/Y/Z:24/10/30 m/min : : Equipment/Accessory: Technology:Turret with 12 stations Taper:BMT55 Tooldive:5.000 rpm, 9,3 kW, 44 Nm Movement in X/Y/Z:235/105/580 mm Rapid travers in X/Y/Z:24/10/30 m/min Kdodpexybxrsfx Ag Ajw : : : Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pump with Oilskimmer and Highpressure, 10bar Toolmeasurement:Automatic Measuringarm Rawmaterialfeed I:Interface Barloader prepared Rawmaterialfeed II:Automatic Working Door and Interface Robot prepared Finsihedpartremoval:Part catcher with collecting box Setup operations:Electronic Handwheel Further Equipment:Trafo

Year of construction: 2002, condition: ready for operation (used), Media Power consumption 4 to 10 kW Kjdpsxxdrrjfx Ag Asdw This TWIN SEAM KA 2000-3000 roll bending machine was manufactured in 2002. It handles coils up to 2000 mm wide and 7 tons in weight, producing channels from 140 x 140 mm to 2500 x 2500 mm. Efficient with a power consumption of only 4-10 kW, it offers high capacity production up to 10 tons per 8 hours. Contact us for more information about this machine. Application Types Bending

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Condition: workshop checked Rigid milling spindle; new bearings Kodpsw I Uinofx Ag Aodw With table extension with extendable Frame support 2500 mm Motor 5.5 kW Speeds 3000/4500/6000/8000/10000 rpm Milling stop with 2 adjustment options; one overall stop and one rear removal jaw Suction hoods 120 mm Automatic motor brake Right-left rotation With Haffner feed with 4 rollers Weight approx. 700 kg Availability: by arrangement Location: Flörsheim

Condition: excellent (used), SEVERT Double-Column Rotary Positioner S 40.1-1HH Can also be used as a single-column elevating rotary device (Mono) Total load capacity: 2,000 daN Load capacity per column: 1,000 daN Clamping plate 1 torque: 1,400 Nm Clamping plate 2 free-rotating, without drive Kdodpfx Aexxx Nrjg Asw Clamping plate rotation speed: 2.0 min⁻¹ Clamping plate 1: W1070 x H720 x D30 mm, Part no. 20452-001 Clamping plate 2: W1070 x H720 x D30 mm, Part no. 20453-001 Vertical travel: 680 mm Lifting speed: 2,200 mm/min Welding current return: 400 A B2 Dimensions: Column 1 with base: Length: 970 mm Width: 885 mm Height: 2,350 mm Net weight: 1,200 kg Column 2 with chassis: Length: 970 mm Width: 1,030 mm Height: 2,350 mm Net weight: 1,600 kg Excellent condition, complete documentation available We have several column elevating rotary devices in stock with capacities from 1 tonne up to 15 tonnes.

Condition: excellent (used), Year of construction: 2008, operating hours: 17,745 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 570 cm³, ejector force: 58,000 N, ejector stroke: 200 mm, plate length: 1,050 mm, plate width: 995 mm, total length: 2,300 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 14,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503469 manufacturer: KRAUSS MAFFEI type: KM 250-2000 CX controller: MC5 year of construction: 2008 Kdsdpfxjxwvdwe Ag Asw operation hours: 17745 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1170 mm opening stroke: 820 mm screw diameter: 55 mm swept volume: 570 ccm injection pressure: 2387 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor machine incl. Handling machine incl. safety fencing machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67 Schuko-socket 10A measures of machine l x w x h: 6.7m x 2.2m x 2.3m total weight: 14500KG technical data robot-system handling type: Linear manufacture: Krauss Maffei controller: LR 150 - 1577 X axis: 900 mm Y axis: 1400 mm Z axis: 2000 mm total weight: 395 kg

Condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Industrial trailer: with 1-axle turntable steering -Platform: 2000 x 1000 mm, height 525 mm Ksdpohubc Eofx Ag Aedw -Load capacity: 3000 kg -Tires: solid rubber -Trailer coupling: for industrial trailers -Dimensions: 3515/1000/H525 mm -Weight: 264 kg

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 828D - ShopTurn, _____ Kdjdpjxx Ergjfx Ag Ajw Description: Year of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 360 mm Turning length : 520 mm Main spindle: Technology:Belt spindle Speed:6,000 rpm Power (max.):18.5 kW Bar capacity:52 mm Workpiece clamping:3-jaw chuck, Samchully MH-206 V1 Tool holder (X/Y/Z): Technology:12-station turret Tool holder:BMT55 Tool drive:5,000 rpm Features/Accessories: Chip management:Chip conveyor Coolant management:IKZ pump with oil skimmer and high pressure, 10 bar Tool measurement:Automatic measuring arm Automation:Prepared Finished part removal:Parts catcher with collection box Setup operation:Electronic handwheel

Condition: used, Year of construction: 2007, Hydropneumatic operation Profile height: 200 mm below hold-down Kdjdpfoxwykuex Ag Aew Max. punching height: 150 mm Abutment height: 150 mm Weight: approx. 400 kg

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Control: Bosch Type 3 Basic Standard equipment: Kodpfx Agsxxbdlj Aedw - Robust C-frame - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post

Condition: new, Year of construction: 2025, load capacity: 500 kg, 3-axis rotary and turning positioner 500, 1000, 2000, 3000 kg load capacity, clamping disk diameter 0.5 0.65, 0.8 1.0 meter have proven themselves in the field of construction and agricultural machinery, commercial vehicles, industrial trucks as well as in the aviation and energy technology sectors. For welding, assembly, machining, etc. With their stable and robust design, flexible positioning over three axes, even overhead, and easy operation, they make welding easier. easy to operate, they facilitate the welding, assembly and handling of large workpieces. workpieces. Faster production, increased productivity Optimum positioning of the workpiece improves the welding quality and enables a higher deposition rate Improved safety, dangerous crane handling is greatly reduced Simultaneous positioning of up to three axes without time-consuming reclamping Simple operation and ergonomics during processing protect and relieve the operator Flexibility thanks to modular adaptability and customer-specific special designs Kodpfx Aeulaxbjg Ajdw possible The basic principle: By positioning the support arm rotary axis above the clamping plate, the support arm acts as a counterweight to the workpiece. counterweight to the workpiece. The machines are therefore considerably more powerful than turn-tilt tables or turn-tilt positioners. This principle makes it possible to handle the specified specified loads in any position. Due to the endless rotation of the 2 axes and the additional height adjustment, all workpiece positions (even overhead) are possible. possible. Speed of turntable infinitely variable 0.1 to 1.0 rpm, from 2000 kg load capacity 0.05 to 0.6 rpm. with radio remote control Rotation range 360° endless Swivel range 360° endless Stroke: 1000 - 1500mm, from 2 tons load capacity 1250 - 2000mm Arm radius up to 1000 kg 1 meter, from 2000 kg 1.5 meters

Condition: good (used), Year of construction: 1970, turning diameter: 2,000 mm, year of last overhaul: 2004, WORKING RANGE TURNING .. swing diameter (max): 2000 mm .. worpiece length max.: 10000 mm .. workpiece weight max.: 60000 kg Kdsdpfxsxm Rt Eo Ag Aow The machine was completely overhauled in 2004. Accessories: various bezels, as shown in the pictures.

Year of construction: 2009, condition: used, Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Manufacturer: KTS, heavy-duty transport vehicle industrial trailer type DSL with 1-axle turntable steering -Type: DSL -Platform: 2000/1000/H610 mm Kedpfx Aol Tuu Deg Ajdw -Load capacity: max. 5000 kg -Tires: solid rubber -Total dimensions: 3560/1000/H610 mm -Own weight: 300 kg

Condition: used, Year of construction: 1990, saw blade diameter 350 mm dimensions of saw-blade 350 x 32 x 2,5 mm cutting diameter 115 mm capacity 90 degrees: square 95 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round rechts & links 110 mm capacity 45 degrees: square rechts & links 95 mm Kdodpfxewvl E Ro Ag Ajw capacity 45 degrees: flat rechts & links 125 x 95 mm capacity 60 degrees: round 90 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 90 x 95 mm cutting speed 15 - 90 m/min total power requirement 2,5 kW weight of the machine ca. 400 kg dimensions of the machine ca. 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Machine base

Condition: used, Year of construction: 2006, Hydropneumatic operation Profile height: 200 mm below hold-down Max. punching height: 150 mm Abutment height: 150 mm Kjdpfx Ajxwyidsg Asdw Weight: approx. 400 kg

Condition: used, Used Becomix type MV-2000 stainless steel premix vacuum processing vessel. Approximately 2,000 litre capacity. Has welded dished top and welded dished bottom heads. Internal rated 2 bar / full vacuum design pressure at 134 deg.c. External jacket rated 4 bar design pressure at 152 deg.c. Unit has bottom entry agitator driven by a 5.5kW 980 RPM 3/415V 50Hz electric motor. Unit is mounted on stainless steel legs. Click on the link below to see a video of the machine running. Specifications: Kdjdext Ehdepfx Ag Asw Capacity: 528 gal Material of construction: stainless steel Type Of Heads: welded dished top and welded dished bottom Internal Pressure: 29 PSI Jacket Pressure: 58 PSI Internal Temperature: 273°F Type of stainless: stainless steel Legs/Lugs: Yes

Condition: good (used), load capacity: 2,000 kg, 3-axis welding positioner, 2-ton load capacity, in good condition Incl. hand remote control (foot control available on request) Kdsdjxxvabspfx Ag Aew Inclination and rotation speed continuously adjustable 0.05 - 1.0 rpm Clamping plate diameter: 1.0 meter Height tilted to center min. approx. 0.7 m, horizontal 0.9 m Height tilted to center max. 1.6 m, horizontal 1.8 m Length 2.2 m, width 1.35 m

Condition: new, - 3-axis position indicator - magnetic and manual spindle brake - 3 jaw chuck ø 250 mm - 4 jaw chuck ø 320 mm - Z-axis stop - fixed & rotating lunettes - Multifix type B including 4 holders - faceplate ø 430 mm - lighting system - coolant system Specifications - Distance between centers: 2000 mm - Swing diameter over bed: 600 mm - Swing diameter over slide: 360 mm - Swing diameter in cutout: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle taper: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 levels) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical pitch: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/rev (66 steps) - Cross feed: 0.036 - 2.019 mm/rev (66 steps) Kdodevxgtijpfx Ag Asw - Tool holder: 25 x 25 mm - Tailstock quill diameter: 65 mm - Tailstock quill mount: MK5 - Tailstock quill stroke: 120 mm - Motor power: 7.5 kW - Voltage: 400 V - Dimensions WxHxD: 3460 x 1800 x 1150 mm - Weight: 2250 kg

Condition: used, Year of construction: 1991, Table size 2000 x 450 mm X/Y/Z - 1250/430/510 mm Spindle taper ISO 50 Spindle speeds 28-1400 rpm Equipped with: 3 axis dro 2 pcs. arbor support 5 long arbors 2 pcs. vices Kjdpfx Agexv Shvo Ajdw 15 pcs. tool holders

Condition: used, Year of construction: 2008, x-travel 2000 mm y-travel 620 mm z-travel 520 mm tool taper 2500 x 600 mm control 2000 kg tool magazin: SK40 rapid traverse HEIDENHAIN table-size 30 - 8000 U/min feed 45 m/min total power requirement 45 m/min workpiece weight max. 20 kW diameter of tools max. 10500 kg tool length - max. 5400 x 3300 x 3000 mm Equipment: - Heidenhain iTNC 530 control system - Tool magazine with 30 spaces - Chip conveyor Kjdpfx Asulnbkjg Aodw - Screen filter system with IKZ - Operating instructions Optional (on request): - Radio probe (Heidenhain) - Tool measurement system (Heidenhain TT 160)

Condition: good (used), Year of construction: 2010, Arburg 570 H 2000-400 (2010) Clamping force: 200 t Screw diameter: 35 mm Kodpswpkfcefx Ag Aedw Shot weight: 141 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 154 cm3 Screw stroke: 160 mm Injection pressure: 2000 bar Type: Horizontal Drive: Hybrid Equipment: Thermoplastics cylinder cpl. 35 mm high-wear resistance Drive unit w. 11 kW motor and 21.4 l/min capacity SELOGICA 'direct' controller Air blast system 1 with pressure reducer Interface for robot system (EUROMAP 67), 50-pin AED - electrom. dosage drive 9 electr. heating control circuits for mould heating Interface for colouring device 8 free cooling circuits manually adjustable Position-regulated screw

Condition: used, Year of construction: 2009, operating hours: 3,312 h, 2009 | Haulotte H15 SX (15m) | Used Scissor Lift | 3312 hours 📍Location: France, Illange 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 9600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 35 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Left front stabilizer works after bypassing needs to be repaired , only steers right , broken steering button , engine has underpressure Kdodpfexv Eyfox Ag Aow 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39711 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 77,888 h, Control Unit Model PNC DECO Brand FANUC Main Drive Number of spindles 2 Spindle speed range 8000 rpm // 6000 rpm Spindle motor power 7.5 kW Number of axis 10 Media Main electronic connection 400V / 50Hz Additional Equipment Bar loader: TORNOS ROBOBAR SSF-532 Some tool holders included and tool setting device is included in the offer This Tornos Deco 2000-26 Lathe was manufactured in the year 1999 in Switzerland and has 77888 production hours. It is equipped with a TORNOS-BECHLER FANUC PNC DECO control unit and has 10 axis. The machine has a spindle speed of 8000 rpm main spindle and 6000 rpm counter spindle. It comes with a TORNOS ROBOBAR SSF-532 bar loader. Contact us for more information about this lathe. Kdsdpfxexwqrpe Ag Aow Application Types Turning

Condition: good (used), Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Teslaman, DC High Voltage Power Supply TD2202 Series -Type: TD2202P100-2000 Kodpsxvpm Aefx Ag Ajdw -Voltage: 220 V -Power: 0 - 100 kV -Dimensions: 520/480/H140 mm -Weight: 22.4 kg

Year of construction: 2002, condition: ready for operation (used), - USED - 5-AXIS CNC LATHE MAX TURNING LENGTH: 760 mm MAX TURNING DIAMETER: 330 mm BAR CAPACITY: 65 mm SPINDLE: 4500 rpm; 11-15 kW; ASA A2-6 ; 210 mm COUNTER SPINDLE: 6000 rpm; 5,5-7,5 kW; 169 mm X-AXIS TRAVEL: 250 mm Y-AXIS TRAVEL: ± 50 mm Z-AXIS TRAVEL: 830 mm B-AXIS TRAVEL: 830 mm RAPID FEEDS X-Y-Z: 24 - 7,5 - 20 m/min DRIVEN TURRET HEAD: 12 POS; 6000 rpm CONTROL UNIT: FANUC 18i-T WEIGHT: 5350 Kg OVERALL DIMENSIONS: 3500 x 1700 x 2060 mm ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER Ksdpfsmmlprsx Ag Asdw NOTE: PART CATCHER WITH BELT; AUTOMATIC DOOR OPENING SYSTEM

Condition: ready for operation (used), Year of construction: 2018, operating hours: 29,688 h, General Data Measurements width 600 mm Measurements depth 600 mm Measurements height 1350 mm Machine weight 110 kg Main Drive Number of spindles 1 Spindle speed range 20000 Ksdpfx Ajxwfmzsg Ajdw Spindle motor power 60.0 - 75.0 kW Number of axis 4 Movement X-Axis Movement 2000 mm X-Axis Rapid Traverse 75 m/min Y-Axis Movement 630 mm Y-Axis Rapid Traverse 75 m/min Z-Axis Movement 550 mm Z-Axis Rapid Traverse 75 m/min Tools Number of index 24 Type of tool holder HSK-A 63 Additional Equipment Nominal pressure: 200 bar Test pressure: 260 bar Temperature range: -10 to 120 °C Bypass opening pressure: 7 bar Differential pressure indicator: 5 bar Maximum voltage (AC): 250 V // Maximum voltage (DC): 200 V Maximum switching current: 1 A Switching power: 70 W Protection class: IP 65 Weight: 37 kg This 4-axis CHIRON Mill 2000 High Dynamics was manufactured in 2018. It features a single-spindle head, HSK-A 63 tool holder, and a maximum spindle speed of 20,000 rpm. The machine offers X-axis travel of 2000 mm, Y-axis travel of 630 mm, and Z-axis travel of 550 mm, with rapid traverse speeds of 75 m/min. Consider the opportunity to buy this CHIRON Mill 2000 High Dynamics vertical machining centre. Contact us for more information about this machine. Application Types Milling