Used Gesan Dv 200 for sale (16,579)

Condition: like new (used), Manufacturer: Marel Model: Active Mixer 200 Year: 2020 Condition: Used Serial Number: 10446009 Stock Number: 3302 Mixer: 200 litres Water: 2 - 5 Bar Power: 3 x 400V, 50Hz, 7kW Dimensions: 1250 x 950 x 1800 mm Weight: 400 kg Dsdpfx Ajyym Sgeitskp

Condition: excellent (used), Espec Type: TSA-202E-W Temperature shock chamber, water-cooled Cold chamber: -55°C to 0°C Hot chamber: +50°C to 200°C System: Two-zone testing via damper control Temperature fluctuation: ±0.5°C Hot chamber: Temperature: Heating time: from ambient temperature (20°C) to +200°C within 15 minutes. Cold chamber: Temperature: Cooling time: from ambient temperature (20°C) to -55°C within 35 minutes. Temperature: Recovery time: within 5 minutes. Internal dimensions (W x H x D mm): 650 x 460 x 670 External dimensions (W x H x D mm): 1550 x 1900 x 1670 Approx. 200 liters Power supply: 400 V AC 50Hz: 65 A Refrigerant: R404A 5 kg, R23 2.0 kg Weight: approx. 1200 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant Dkedpjzh Htkefx Aitjp 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: new, Year of construction: 2023, Manufacturer: Holac Model: sect 200 Year: 2023 Condition: New Dsdpoyz Sxhsfx Aitjkp Serial Number: 273-00-129 Stock Number: 2948 Cutting diameter: max 200 x 180 mm Chamber length: 720 mm Thickness: 1 - 30 mm Speed: 210 / 420 cuts per minute Power: 3 x 400V, 50Hz, 3.5kW Dimensions: 2100 x 900 x 1200 mm Weight: 320 kg

Year of construction: 2024, condition: used, machine/vehicle number: 2333470, Thermal reactor Dodpfx Aioziltrstjkp

Condition: excellent (used), Weiss Type: SWT 200/400 Weiss spray and splash water test cabinet This cabinet is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Features Glass door with wiper Pneumatic drive of the swivel nozzle Adjustable swivel angle Replaceable swivel nozzles Nozzle holder swivels and is replaceable Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Max. load with test specimen (evenly distributed over the area) Permissible test specimen weight for the test specimen holder (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection class tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Dksdezh D Rmopfx Aitep Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Weight: 375 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Automatic feed via Elgo control E 255 For attachment to any Elumatec single-head saw (right) Max. push length: 3000 mm Dedpfoywxwpjx Aitekp

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, segment jaws -Manufacturer: Schunk, soft attachment jaws, 4 sets = 12 pieces -Type: SWB-200 Dkjdpfxezhuw Dj Aitsp -Dimensions: see photo technical drawing -Submission/Price: complete -Transport dimensions: 240/180/H60 mm -Weight: 16.3 kg

Year of construction: 2001, condition: used, Manual length adjustment via handwheel with digital display For attachment to any Elumatec single-head saw (right) Max. insertion length: 4,500 mm Dedpfx Aijzh Iucstskp Pneumatic parking brake

Year of construction: 2001, condition: used, Automatic feed via Elgo control 255 Dsdpfxjzh Itfs Aitekp For attachment to any Elumatec single-head saw (right) Max. push length: 3000 mm

Condition: like new (used), Year of construction: 2000, operating hours: 47,500 h, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed rate X-axis: 60 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, controller manufacturer: Heidenhain, controller model: TNC 430 M, workpiece weight (max.): 5,000 kg, total height: 4,174 mm, total length: 7,900 mm, total width: 8,800 mm, table width: 1,700 mm, table height: 1,400 mm, rotary table diameter: 1,700 mm, rotational speed (min.): 200 rpm, spindle speed (min.): 8,000 rpm, coolant supply: 40 bar, spindle motor power: 30 W, Equipment: chip conveyor, documentation/manual, Year of construction: 2000 CNC controller: Heidenhain TNC 430 Axes X-axis travel mm: 1800 Y-axis travel mm: 2000 Z-axis travel mm: 1100 C-axis degrees: 360º (0,001) B-axis degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 Milling/turning table nc: Table dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Table rotation speed rpm: 200 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 30/20(40%ED/cont) Cooling Tank capacity: 900 Tool system Tool holder: SK 50 Tool magazine slots: 120 Tool changer: Double gripper Chip-to-chip time s: 13.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool breakage probe Oil skimmer Machine running times Under power: 65200 Spindle Working: 47500 Basic machine dimensions / weight Dkedpfxezhu I Ne Aitsp Length mm: 7900 Width mm: 8800 Height mm: 4174

Condition: used, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board -Manufacturer: Mikron, electronic module circuit board from CNC milling machine Mikron UME 600 -Type: 958 78 11 200 -Dimension: 145/110/H55 mm Dsdpfx Aorc Ilgsitokp -Weight: 0.4 kg

Condition: used, Data light barrier, retro-reflective light barrier, light barrier, optical data transmission -Manufacturer: Lenze, optical data transmission data light barrier -Type: DDLS 200/120.2-10 -Voltage: 18-30V DC Dodpeq Untgsfx Aitekp -Dimension: 190/85/H110 mm -Weight: 1.2 kg

Condition: good (used), Frequency converter, frequency transformer, converter for bottle vibrators, vibrating bottles, internal vibrators Dedpfx Aijc Nfd Tjtokp -Frequency converter -Power: 5 kW -Output: 42 V -Frequency: 200 Hz -Dimensions: 1160/600/H740 mm -Weight: 88 kg

Condition: good (used), bench vice, metalworker's vice, parallel vice Dodpfx Aeddfh Eeitekp -Jaw width: 150 mm -Wingspan: 200 mm -Number: 2x vices available -Price: per piece -Dimensions: 490/340/H195 mm -Weight: 27 kg

Condition: used, Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 200 mm -Piston diameter: 80 mm -Piston rod: 25 mm Dodpfxofbmbhe Aitekp -Dimensions: 420/95/H95 mm -Weight: 5.3 kg

Condition: used, Magnetic drill, hand drill -Magnetic base: Magnetor type PS 32 L -Drilling machine: AEG type HBE-IV - Recording: MK2 -Max. Drill: Ø 23 mm -Connection: 265V/200Hz -Dimensions: 700/300/H670 mm Djdpofc R D Aefx Aitjkp -Weight: 49 kg

Condition: good (used), Barrel lifter, barrel handling, barrel gripper, barrel lifter, barrel handling, barrel gripper -Drum lifter with: gripper head -Load capacity: kg -Suitable for: 1 x 200-L steel bung drums, steel lid drums, rolling hoop drums -Reception: 410 mm -Automatic opening when: setting down the barrels -Number: 2x grippers available -Price: per piece -Dimensions: 340/305/H900 mm Djdpfed Aghkjx Aitskp -Weight: 47 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Mounting thread: M20 Dedjd Itcrepfx Aitekp -Gradient: 2.5 mm -Weight: 32 kg

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit, gear pump, -Manufacturer: Orsta, hydraulic pump A10 TGL 10859 -Motor: 2x 0.55 kW 1360 rpm -Pressure: nominal pressure 16 MPa / 160 bar max pressure 200 bar -Flow rate: total approx. 12 l/min (2 x 6 l/min) -Hydraulic tank: with indicator -Individual components: see photos -Number: 2x aggregate available -Price per piece -Dimensions: 735/510/H1395 mm -Weight: 112 kg/pc. Dedsigrwispfx Aitekp

Condition: good (used), Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Manufacturer: Würth, hanger bolt M10 x 180 50 pieces/box -Type: SW 7 -Material: stainless steel A2-70 -Quantity: 21x box available Dkedpfx Asipap Hjitsp -Price: per box -Carton dimensions: 200/90/H85 mm -Weight: 3.9 kg/carton

Condition: good (used), Link pipe cutter, pipe cutter -cutting pipe diameters: 80 - 200 mm -The number of links allows the device to be adjusted to the desired pipe diameter. -steel cutting wheel -Ideal for working in trenches -Transport case Dkedpfxeb A Rgzj Aitep -Weight: 11 kg

Condition: excellent (used), Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines Dodpfx Aiob A I Ixetskp -Drum: Ø 176 mm -Drum length: 430 mm -Speed: 2800 rpm -Power: 3 kW -Shaft mount: Ø 28 mm -other sizes also available in stock -Weight: 50 kg

Condition: good (used), Grinding machine, angle grinder, for chipper knives, planer knives, saw blade grinder, lathe grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder -Manufacturer: Chuet Nevers, tool grinding machine -Speed: 3000 rpm -Grinding wheels: Ø max. 200 mm -Accessories: included, see photos Dkedpfx Aiei En Dxetjp -Dimensions: 680/590/H1560 mm -Weight: approx. 121 kg

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines Djdpfxown D Eys Aitekp -Forklift tines: 2 pieces/1 pair -Length: 1800 mm -Cross-section: 200 x 60 mm -Recording: see photos -Transport dimensions: 2060/1080/H200 mm -Total weight: 487 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: AROWA, three-jaw chuck chuck size Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 175 mm / M10 -Accessories: incl. 2nd set of interchangeable jaws Dedpswtl Rnefx Aitekp -Dimensions: Ø200 x 105 mm -Weight: 13.8 kg