Used Gesan Dv 200 for sale (17,092)

Condition: good (used), Code: 0366 Brand: HIRZT - ITALY Model: B 200 - CE Standard Automatic edge bander for pre-glued tapes, for furniture, custom-made furnishings, woodworking shops, panels, doors, kitchens, bathroom furniture, and various - CE Standard Features: Feed track and pressing unit with rubber rollers 70 mm and elipsoidal groovings to ensure a perfect panel feeding Dwodpfoy Hlapjx Afved Powerful blower equipped with air filter End trimmer by automatic guillotine with free unloading of the exceeding pieces of tape Infeed fence adjustable according to the tape fitness through a four-face stop thickness adjustment Technical data: Panel height 10-40 mm Max edge thickness 0,5-2 mm Trimming motor speed 9000 rpm Trimming cutters diameter 70 mm Adjustable front support Suction inlet diameter 100 mm Installed power 3,2 Kw Compressed air 6 bar Overall dimensions mm 1850 x 900 x 1350 h Weight kg 420

Condition: used, operating hours: 8,891 h, mileage: 92,412 km, power: 62 kW (84.30 HP), first registration: 10/2012, overall weight: 4,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,650 kg, empty load weight: 2,850 kg, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, Equipment: ABS, air conditioning, cabin, power assisted steering, seat heater, soot filter, German vehicle, 1st owner, condition as shown in photos, Schmidt Swingo available in multiple units, only 8,891 sweeping hours, selectable four-wheel steering, two front disc brushes (800mm width), front pre-spraying system, sweeping width: 2,800 mm, ideal for footpaths, cycle paths, and narrow alleys, 1.8 m³ debris hopper, fresh water volume: 180 liters, total water volume: 360 liters, hopper lid opening and tipping via cable remote control, VM 56C/9 engine, output: 62 kW, air conditioning, reversing camera, radio, 2 seats, air-suspended driver’s seat, EasyDrive (hydrostatic drive) (SN), seat heating, warning beacons, gross vehicle weight: 4,500 kg, unladen weight: 2,850 kg, payload: 1,650 kg, self-propelled machine. If a new technical inspection (TÜV) is required, we are happy to provide a quotation from one of our partner workshops. Dwedpfxjvhqgle Afved Our offer generally excludes new TÜV inspection, new DGUV, new SP, and new UVV. You can find more trucks and commercial vehicles on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We recommend and strongly encourage viewing and inspecting the goods to avoid any misunderstandings about their condition and suitability. Viewings and inspections are welcome by appointment at any time. All information is provided without guarantee. We accept no liability for errors or incorrect descriptions in the offer. Buyers are obliged to independently verify the condition and features of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Dodpfx Afeq H Sqdevewd Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: used, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel Dwodpfx Ajxaavpjfvjd - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : ?machineno=1008-9397092

Condition: new, machine/vehicle number: FGWPEP48ERPC03709, fuel type: diesel, power: 160 kW (217.54 HP), motor manufacturer: Perkins 1106A-70TAG3, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 1.548 kg Functional Generator capacity: 200 kVA Dimensions of cargo space: 251 x 101 x 164 cm CE mark: yes Djdpfx Afowafzmsvowd Other information Fuel consumption: 30,7 L/Hour at 75% Load Prime Generator: FG Wilson FGL30120 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 394 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames

Condition: new, 0 3.700mm, 5.100mm, 6.100mm mm Working height 160 mm Dwodoxmk Agspfx Afvod 0 ja Control ja

Condition: used, Year of construction: 2023, total length: 8,430 mm, · Hubhöhe 18350mm · Plattformhöhe 18.35 m · Überhang / Knickpunkt Gelenk 8 m · Korbarm-Drehwinkel (oben / Boden) +69 ° / -66 ° · Drehung des Oberwagens 355 ° · Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° · Anzahl Personen (innen / außen) 2 / 2 · Bodenfreiheit Mitte Radstand 0.44 m · Radstand 2.40 m · Fahrgeschwindigkeit - Transportmodus 4.70 km/h · Fahrgeschwindigkeit - Arbeitsmodus 0.80 km/h · Steigfähigkeit 40 % · Zulässige Neigung im Arbeitsmodus 5 ° · Antriebsräder (vorne / hinten) 2 / 2 · Lenkräder (vorne / hinten) 2 / 2 · Gebremste Räder / Räder 0 / 2 · 230-V-Anschluss · 4 Allradlenkung mit hundeganglenkung · 4 gleichzeitige Bewegungen · Alarmton und Kontrollleuchte (Neigung, Überlast, Gefälle) · CAN-Bus-Technologie · Differentialsperre an der Hinterachse · Elektrische Notpumpe · Engine with DPF · Korb verzinkt 2.100 mm · Pendelvorderachse · Proportional-Regelung · Stop & Go · Stufenweise Drehzahlregelung · Totmannpedal · Vorderachse mit Schlupfbegrenzung · großes Farbdisplay an der Bodensteuerung · Innerer Wenderadius 1.26 m · äußerer Wenderadius 3.90 m · Motornorm Stage V · Nennleistung Verbrennungsmotor / Leistung (kW) 34 Hp / 25.50 kW · Bodendruck 20.65 dan/cm2 · Hydraulikdruck 340 bar Dwsdpfxjxndpvo Afvsd · Fassungsvermögen des Hydrauliktanks 80 l · Fassungsvermögen des Kraftstofftanks 78.50 l · Umweltschädliches NOX 2.61 kg

Condition: new, 6.0 mm ST 40 3.0 mm VA 30 - 140 Grad blade length 200 x 200 mm table: 900 x 990 mm work height max. 940 mm Punching capacity 35.0 in 6.0 mm ST 40 Throat / punching unit 135 mm engine output 4.0 kW weight 1020 kg range L-W-H 900 x 990 x 1200 mm Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - hydraulic Notching machine with adjustable angle & punching station - 1 set of cutting knives - Round punch with die 12 mm Djdpfx Aexcuybjfvowd - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop

Condition: new, square edge steel 20x20 / 25x25 mm flat steel 100 x 7.0 mm round bar steel 22.0 / 27.0 mm L-beam 100 x 10 mm weight of the machine ca. 33.0 kg. range L-W-H 900 x 430 x 310 mm Features - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - Bending performance "cold" : Flat steel 100 x 7 mm 65 x 12 mm Round steel 22.0 mm Square steel 20 x 20 mm Angle steel 100 x 10 mm - - - - - Bending capacity "hot" : Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 15 mm - - - - - Scope of delivery - Bending plate - Angle stop stepless - Clamping block with eccentric clamp - Material stop Dedpfx Afjxcuyhevjwd

Condition: used, Year of construction: 1987, functionality: unexamined, Press force: 200 kN Ram stroke, constant: 210 mm Adjustable strokes per minute: 20 - 60 Usable working energy per cycle: 15 kJ Drive power: 24 kW Tool installation height between table and ram, stroke down, adjustment up: 500 mm Dwodjwy Sqzjpfx Afved Ram adjustment: 100 mm Ram clamping area: 600 x 600 mm Table clamping area: 600 x 600 mm Ejector stroke: 90 mm Weight: 20 t

Condition: used, Description: Emission Test Chamber Manufacturer: Vötsch Dwjdpfoxg Hrqsx Afvjd Model: VCE 200 Test chamber volume: 200 liters Temperature range: +20°C to +130°C Humidity range: 30 to 95% RH Temperature deviation: temporal ± 0.3 K Temperature deviation: spatial ± 0.5 K Average temperature change rate: cooling approx. 0.3 K/min, heating approx. 0.4 K/min Dew point range: +5°C to 60°C Humidity deviation: temporal ± 1 to 3% RH Voltage: 3/N/PE AC 400V±10% 50Hz Rated power / rated current: 21 kW / 41 A Refrigerant: R404A Internal test chamber dimensions: 610 x 610 x 560 mm (W/D/H) Overall dimensions: 1250 x 1700 x 2350 mm (W/D/H) Weight: approx. 750 kg Item Condition: Used item as shown in the pictures Please contact us if you have any questions Shipping: The quoted shipping costs apply to deliveries within Germany Worldwide shipping available (please inquire for shipping costs outside Germany) The given shipping costs apply to shipping within Germany Sale exclusively to business customers, without warranty or guarantee. Deviations from technical data and errors in the item description may occur and are reserved.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BA 32-200, SICA MUFFENMASCHINE 2F.1T 32-200 Dwedpfsxiy R Eox Afved Application: KG-U PVC pipes, Pipe lengths: 0.5 m, 1 m, 2 m, 5 m, 6 m Year of manufacture: 2007 1 socket per cycle Socketing tools: 110×3.2 The socketing machine is in very good condition, still operational and scheduled to be taken out of production in 3-4 months.

Condition: like new (used), Refurbished Mazak Main Spindle QTS 200 The spindle has been completely refurbished; spindle bearings and spacer sleeves have been replaced. Subsequently, it has been balanced. We have further refurbished Mazak spindles in stock; feel free to send us your enquiry. This is an exchange spindle, which means a used part is required in return. Dedpfx Afexawctsvewd If you have any further questions, we are happy to assist you.

Year of construction: 2026, condition: used, Year of manufacture: 2026 New: Yes Empty weight: 400 kg Dimensions of cargo space: 150 x 130 x 107 cm CE mark: yes Please contact Team DPX for more information AC400V-200kW Automatic Load Bank Rated Voltage: 3P4W AC400V 50/60 Hz Rated Voltage & Frequency: 400VAC; 3 phase 4 wire, 50/60 Hz Power Supply: 3P5W AC400V 50 Hz Rated Power: 200 kW at 400V Duty Cycle: Continuois Cooling Type: Forced Air Cooling (Horizontal air intake and exhaust cooling, there will be louver at air outlet and inlet.) Load Steps: Resistive Load: 9 steps, 1, 2, 2, 5, 10, 10, 20, 50, 100 kW Wire Connection: - Load bank input— busbar (star coupling “Y”) Dwedpfxsznr Dbj Afved - Control power input—terminal block Communication Interface: RS232/RS485

Condition: new, Hello, I have high-pressure KSB pumps with ABB electric motors for sale. Applications for the pumps: - Chemical industry - Fuel industry - Gas industry - Paper industry I have various models available: - 3 units: MCPK150-125-200 VX LXM Dwodpjzx Upzjfx Afvod - 2 units: MCPK125-80-250 VC LXM - 2 units: MCPK100-065-200 VC LXM - 4 units: MCPK080-050-315 VC EXM - 4 units: MCPK065-040-200 VC EXM - 4 units: MACD040-025-160 VC X1B The price listed is for 1 complete pump with a motor, model MCPK150-125-200 VX LXM. If you are interested in a different pump model, please contact me.

Condition: used, Year of construction: 2022, operating hours: 1,700 h, PIŁA PANELOWA Producent: HOMAG Typ: SAWTEQ B-200 Optimat HPL200/38/22 Rok 2022 Z załadunkiem only 1700 working hours !!!! Dwedszkmrfepfx Afved

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,425 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 220 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, empty load weight: 2,450 kg, Machine completely cleaned and overhauled. Dwsdpfx Aey Tvtmofvod 0.1 mm option available. Available for viewing at our facilities in Semsales, Switzerland.

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control/Software MAESTRO Safety cabin (enclosure) of the working head No. 2 Workpieces fixing clamps (for the panels introduction in the working area Minimum workpieces dimensions (X - Y - Z) mm 200 x 50 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 1300 x 95 WORKING GROUPS: No. 1 Drilling head (5-sided with Ro.Ax. roto-axial technology) F31LTC with spindles: - No. 24 Independent vertical boring spindles - No. 11 Independent horizontal boring spindles (6 in X + 4 in Y) Dwedszza Sgopfx Afved No. 1 Circular Grooving Saw (on X axis) dia. (mm) 125 No. 1 Vertical electro-spindle (HKS63) power Kw 6,6 Automatic Tools Changing System - Tools storage plate (No. 6 folds-positions) OPTIONAL: Panel loading robot + Robot for unloading machined panels

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,000 h, Machine in very good condition, only 17.000 hours. Fully functional. Dwedjz Ayq Ejpfx Afved

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 9615, total length: 31,200 mm, total height: 2,300 mm, total width: 4,600 mm, overall weight: 9,000 kg, Equipment: rotational speed infinitely variable, safety light barrier, SC3-200-5 fully automatic cutting system Angle and inclination drive for the sawing station Automatic infeed system Feed cross conveyor (6 strands, wood length up to 14 m) Component support for small cross-sections Control unit for waste disposal Conveyor belt for waste disposal (integrated) 6-arm stacking table (wood length up to 10 m) Combination support for vertically operating tools 2x Vertical drilling unit 2.2 kW 2x Vertical chain mortiser 5.5 kW Additional combination support, vertical, for rotary milling cutter Rotary milling head 7.5 kW Combination support for horizontally operating tools 2x Horizontal drilling unit 2.2 kW Marking device, rear Marking device, bottom Dwjdpfjzyihuex Afvod Marking device, front Angled conveyor, right

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, FTNON-JBT MOP-200 onion peeling machine + SRI-200 sorting table For sale: an FTNON-JBT MOP-200 industrial onion peeling machine, complete with the accompanying FTNON-JBT SRI-200 sorting table. The equipment is suitable for industrial onion processing and can be used for inspecting and sorting the product after the peeling process. The two machines can be operated as part of a technological line. Machine details: Manufacturer: FTNON-JBT Type: MOP-200 onion peeling machine Type: SRI-200 sorting table Type: with onion feeding hopper Application: industrial onion peeling and sorting Stainless steel, food-grade design Suitable for industrial use Dwodpfx Afjzw A R Rsved Sold together with the sorting table connected to the onion peeling machine. The machines are in used condition. Viewing is possible by prior arrangement. The equipment is primarily recommended for food processing plants that want to expand their onion processing capacity or supplement their existing technological line. Additional technical data, photos, and information are available upon request.

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - track width 340mm - shaft width 340mm - disc bore diameter 80mm - discs mounted on the upper shaft 350mm - discs mounted on the lower shaft 300mm - max cutting height 200mm - min workpiece length 700mm – top - 2 rows of feed rollers - smooth, sliding, pressure shaft - feed rollers - 2 smooth, sliding, pressure shafts - shaft with saws - 3 smooth pressure rollers – bottom - track - shaft with saws - track - stepless feed speed adjustment - main motors 2x approx. 55kW - feed motor 3kW - electric lifting of the machine body up/down - manual adjustment of the saw shafts - central lubrication - diameter of dust extraction nozzle 2x200mm Dedpfx Afezxqq Isvswd - dimensions L/W/H 2700x1800x2150mm - weight approximately 5000kg ADVANTAGES – German production – two-shaft – 2x55kW motor – multi-saw, used, very good condition Net price: 178900 PLN Net price: 41600 EUR, depending on the exchange rate of 4.3 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), Year of construction: 2008, CNC machine for applying Stellite to the teeth of bandsaw blades / Type GPA200 Stellite application machine Technical data for bandsaw blades: Blade width: 80 - 360 mm Blade length: 6 - 18 m Blade width: 35 - 100 mm Blade thickness: > 0.6 mm Technical data for frame saw blades: Blade width: 80 - 200 mm Blade thickness: > 1.6 mm Tooth pitch length: < 1700 mm Technical data for mini frame saws: Blade width: > 35 mm Blade thickness: > 0.5 mm Tooth pitch length: < 700 mm Dsdsz Hdqbepfx Afvswd Rake angle: 10 - 40° External compressed air supply: < 6 bar Stellite diameter: 0.76 - 4 mm Working speed in teeth/minute: < 10 teeth/min Welding unit - large burner Current: < 150A, operating mode: Mono-gas/Bi-gas, plasma gas flow rate: 1.5 - 2 l/min, shielding gas flow rate: 5 - 8 l/min Welding unit - small burner Current: < 120A, operating mode: Mono-gas/Bi-gas, plasma gas flow rate: 0.2 - 0.6 l/min, shielding gas flow rate: 2 - 4 l/min Additional slider

Year of construction: 2015, condition: excellent (used), Three-jaw chuck Manufacturer: Röhm Diameter: 200 mm With individually adjustable jaws Short taper size: 6 Taper diameter: 106.390 Bolt circle diameter: 133.4 Djdpfx Ajd Th I Tjfvowd Weight: 24.5 kg Year of manufacture: estimated

Condition: used, Technical details: faceplate diameter: 1400 mm swing diameter: 2000 mm turning height: 1270 mm main drive: 80 kW faceplate speeds from - to: 1 - 355 U/min max. workpiece weight: 6.000 kg milling motor: 37 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 Dwsdpfxsvb Dcmj Afved cross rail adjustment - vertical: 800 (8 x 100 mm) mm ram head dimension: 240 x 240 mm max. ram stroke: 1250 mm weight of the machine ca.: 50 to total power requirement: 133 kVA dimensions of the machine ca.: 11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - angular- and straight tool holder head with CAPTO taper - Transmit function - complete splash housing - coolant device, chip conveyor - diverse accessories *