Used Gesan Dv 200 for sale (16,223)

Condition: used, Year of construction: 2003, Steam boiler used Manufacturer: Viessmann Type: Vitomax 200 Year of manufacture 2003 Nominal heat output: 375kw Boiler water capacity:1400l Operating overpressure: 8 bar Gas burner Weishaupt G/1E -Version ZMD-LN Power 80-550KW: year of construction: 2003 Connection pressure 15-500mbar. With existing fittings Dungs DN40 Мы говорим по русски! Visits please only after telephone arrangement! Preferred sale to dealers, tradesmen or export. All information without guarantee, errors and prior sale reserved. The seller is not liable for typing and data transmission errors. Dodjfm E Ifspfx Adwjcf Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder double saw blade cutting height 200 mm, engine power 40 kW, Dcjdpfsh R Tvtjx Adwsf chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material.

Condition: good (used), Year of construction: 1999, machine/vehicle number: 883345, Offer 25513 Technical Data: - Max. working length: 2050 mm - Distance between uprights: 1750 mm - Max. pressing force: 850 kN - Distance table/ram: 535 mm - Throat depth: 410 mm - Ram stroke: 365 mm - Stroke speeds: - Rapid downstroke speed: 200 mm/sec - Return speed: 135 mm/sec - Pressing downstroke speed: 1 - 11 mm/sec - Total drive power: 13 kVA - Space requirement approx.: W 2700 x H 2900 x D 2100 mm - Weight approx.: 9100 kg Equipped with: - 5-axis CNC control DELEM, DA - Y1 + 2; X; R; Z - Two-hand control panel with foot switch Dedpox Exzkofx Adwjcf - CNC-controlled crowning system - CNC-controlled backgauge with height adjustment 5 - 860 mm - Hydraulic tool clamping - Pneumatically assisted die table displacement

Condition: new, ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU-Diesel motor, rotor flight circle Ø 575 mm, 2 x 12 cutting inserts on tool holder, show machine. Djdobg Engjpfx Adwjcf

Condition: new, Hopper opening: 2.500 x 2.000 mm Rotors: 2 pcs. Dcjdpfxsbq St Hs Adwef Rotor flight circle: 580 mm each Rotor design: 5 and 6 cutting teeth Drive: 2 x 90 kW with planetary gears Hydraulic screen flap interlock for the discharge of contaminants Weight: approx. 18.500 kg

Condition: like new (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, overall weight: 450 kg, total length: 1,600 mm, total width: 1,100 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), type of input current: three-phase, We are selling a pulverizer that was previously used for fine grinding trials in the food sector. The machine is robust, reliable and powerful. Dsdpfx Adoudvt Rswecf Technical data + Power: 7.5 kw + Processing capacity: 20-50 kg per hour + Weight: 450 kg Using liquid nitrogen, the machine is immediately ready for use simply plug it in and get started. It is still in mint condition and can be viewed by appointment. be inspected by appointment. The machine is sold plus 19% sales tax. If you are interested or have any questions, we look forward to hearing from you.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 06686, functionality: fully functional, total length: 8,700 mm, IMA Advantage 7200 Edge Bander – PU – Fully Equipped Technical Data: • Year of manufacture: 2001 • Control: IMA IMATRONIC 121 • Max. edge thickness: 20 mm • Max. panel thickness: 50 mm • Min. workpiece length: 150 mm • Min. workpiece width: 65 mm • Feed speed: up to 20 m/min • Variable feed speed • Electric height adjustment • Top belt pressure unit Equipment / Units: • Pre-milling unit • Heating lamp • PU gluing unit • Glue application system – interchangeable glue pots • End trimming saw • Edge trimming unit • Corner rounding unit • Sanding unit • Profile scraper • Flat scraper • Buffing unit • Smoothing station Dimensions: • Machine length: 8700 mm Djdpfxox Igwlo Adwscf Condition: Complete, fully functional machine, ready for operation. Possible to start and inspect.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Dedpfx Adewc Rk Ejwjcf Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: excellent (used), Herringbone Gear Generator MDV 2000 Dsdpfx Aofx Ibnodwjcf MDV 2000 Characteristics: Max wheel diameter: 2000 mm Min wheel diameter: 50 mm Max module: 12 Min module: 3

Condition: like new (used), 200 lfm Fachbodenregal Schäfer R3000 Dodpfjdz Agdsx Adwscf

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: 810, sheet thickness (max.): 4 mm, overall weight: 550 kg, working length: 200 mm, TECHNICAL DETAILS Sheet thickness: 4 mm Dcsdpfx Adoywg Nmswsf Sheet length: 200 mm MACHINE DETAILS Total power requirement: 3 kW Dimensions & Weight Space requirement: approx. 1.0 x 0.8 x 1.0 m Machine weight: approx. 550 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning length: 1,300 mm, turning diameter: 1,000 mm, controller model: Siemens Sinumerik 840 D, faceplate diameter: 1,250 mm, Equipment: chip conveyor, TECHNICAL DETAILS Turning diameter: 1,000 mm Swing diameter: 1,250 mm Turning length: 1,300 mm Swing diameter over bed: 1,250 mm Dcodpfxjywgrbe Adwsf Swing diameter over cross slide: 1,000 mm Maximum swing diameter in the gap: 1,250 mm Spindle diameter at front bearing: 500 mm Faceplate diameter: 1,250 mm Chuck diameter: 1,250 mm Maximum torque: 1,200 Nm Spindle speeds: - Speed range 1: 3.15 - 45 - 112 rpm - Speed range 2: 12.5 - 180 - 450 rpm Driven tools speed range: 50 - 1,000 - 2,000 rpm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load: 80 kW Machine weight: approx. 20 t EQUIPMENT Driven tools Various clamping jaws Tool measuring probe Chip conveyor Filtration system Technical documentation

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, machine/vehicle number: K 240/50 662, turning height: 2,150 mm, workpiece weight (max.): 20,000 kg, turning diameter: 2,200 mm, faceplate diameter: 2,000 mm, No reserve price – guaranteed sale to the highest bidder! The machine was overhauled between 2012 and 2016! 2012: - Digital measuring system (Positip 880) installed - New power clamping band - New selector switches 2015: - Directional clutches on the X-axis replaced - Gibs and nuts on both supports re-adjusted 2016: - All clutches in the main drive re-ground - All bearings in the main drive replaced, including the power supply unit - Drive shaft replaced - Several sets of discs - New spur gear, etc. TECHNICAL DETAILS Turning height: 2,150 mm Swing diameter: 2,200 mm Faceplate diameter: 2,000 mm Max. workpiece weight: 20,000 kg X-axis travel: 1,225 mm Rapid traverse X-axis: 2 m/min Rapid traverse Z-axis: 2 m/min Spindle speed: 3 – 125 rpm MACHINE DETAILS Number of tool turrets: 1 Total weight: 26,000 kg EQUIPMENT Dedpfjyw N Ufex Adwecf Documentation/Manual

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller model: Mazatrol Fusion 640M, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 510 mm Travel Y-axis: 510 mm Travel Z-axis: 460 mm Swivel range A-axis: +30° / -120° Rotation range C-axis: +/- 360° Feed rate range (X-/ Y-/ Z-axis): 1 - 50,000 mm/min Rapid traverse (X-/ Y-/ Z-axis): 50 m/min Indexing A and C: 0.001° Swivel time 90° A/C: 1.9 / 1.5 s Main spindle Max. spindle speed: 12,000 rpm Spindle drive power: 22/15 kW Tool holder: ISO 40 Spindle diameter: 80 mm Acceleration time to max. speed: 1.7 s Worktable Clamping surface: 500 x 400 mm Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 80 mm Dcjdpfx Aeyxmq Tedwjf Distance from spindle to table: 190 - 650 mm Max. workpiece size: 500 x 500 x 405 mm Max. table load: 300 kg Tool changer Max. number of tool positions: 40 Max. tool diameter: 80 mm Max. tool diameter with adjacent spaces free: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time: 4.5 s MACHINE DETAILS Control: Mazatrol Fusion 640M Total power requirement: 51 kVA Dimensions & Weight Space requirement: 3.4 x 3.7 x 2.8 m Machine weight: 7.5 t EQUIPMENT Hydraulic unit Coolant system Chip tray Tool measurement Documentation

Condition: ready for operation (used), Year of construction: 2006, operating hours: 12,500 h, functionality: fully functional, machine/vehicle number: FP3155-406/2006, working width: 1,500 mm, working height: 200 mm, sheet thickness aluminum (max.): 4 mm, working length: 2,850 mm, TECHNICAL DETAILS Maximum sheet length: 2,850 mm Minimum sheet length: 370 mm Maximum bending height: 200 mm Minimum sheet width: 180 mm Maximum sheet width: 1,500 mm Dcedjyx Tldepfx Adwjf Minimum material thickness: 0.5 mm Maximum material thickness (aluminium): 4 mm Maximum material thickness (steel): 3.2 mm Maximum material thickness (stainless steel): 2.2 mm Minimum distance between bends (length): 350 mm Minimum distance between bends (width): 160 mm Number of bends per side: 20 Maximum plate diagonal: 3,000 mm Angle tolerances: ± 40° C Bending angle: 0.2° C Bending tolerance: ± 0.2 mm Straightness and parallelism: 0.6 mm Minimum external bending radius: 1.5.../2 mm MACHINE DETAILS Compressed air: 6 bar Total connected load: 66 kW Main switch: 160 A Operating hours: approx. 12,500 h The seller can offer transport, on-site installation at the buyer’s location, and machine training for an additional fee.

Condition: not inspected (used), functionality: unexamined, total height: 1,100 mm, total width: 400 mm, total length: 500 mm, overall weight: 30 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 500 x 400 x 1,100 mm Weight: 30 kg Dodpjyn A U Sefx Adwecf EQUIPMENT Matching hose package External reference: CES - Lot 157

Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Dcsdjhwi U Tepfx Adwjf Y axis working area: 1550 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Max height workable: 1340 mm Dodex A Hfvspfx Adwecf Max feed speed: 40 m/min

Condition: new, Table size: 420 x 450 mm Table height: 215 mm Table swivels up to: 45 Dcedpfoc Snvfjx Adwjf Saw or cutting blade Ø: 200 mm here cutting depth: 47 mm electrical connection: alternating current 230 V weight: 14,5 kg

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence Dsdpfx Adow N S E Ajwscf - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10024150, Sewing machine Muller Martini Ventura MC-200, Machine speed* Mechanical of 18 to 200 cycles/min, max. 12 000 cycles/h, min. signature length 120 mm, max. signature length 510 mm, min. signature width 75 mm, max. signature width 320 mm, max. signature thickness 4 mm, Lap opening min. 8 mm, low or high folio lap, Stitches Number of stitches standard 13, staggered 14, Stitch length 16.5 mm with/without blind stitch possible for all stitch types Sewing machine Muller Martini MC 200 Dodpfx Adsx Rywkswocf

Condition: good (used), For sale: BERTHIEZ vertical lathe type BMF 200, a heavy-duty industrial machine designed for machining large-diameter components. 🔧 Technical specifications: Dcedpfoyzl Szox Adwof • Brand: BERTHIEZ (France) • Model: BMF 200 • Serial number: A 34004 • Table diameter: approx. 2000 mm • Machinable diameter: Ø 2200 to 2450 mm • Machinable height: approx. 1600 to 2000 mm • Admissible table load: approx. 10 to 20 tonnes • Configuration: double-column (gantry-style) • Feeds: automatic • Origin: made in France

Year of construction: 2021, operating hours: 7,990 h, condition: used, machine/vehicle number: 318657, Power: 42.55 kVA, weight: 5,600 kg, 16-position tool changer, driven tools, Y-axis, chip conveyor, 1 tool cabinet with 7 drawers, with accessories, 1 pallet with tools, 1 lot of clamping jaws, !!!Collection: 08+09 June 2026!!! Dcedpoyztf Ajfx Adwsf

Year of construction: 2008, operating hours: 36,239 h, condition: used, machine/vehicle number: 205849, Traverse paths (x/y/z): 230/100/575 mm, power: 46.2 kVA, weight: 5,200 kg, chip conveyor, 1 tool cabinet with 7 drawers, with accessories, MAZATROL Matrix Nexus control, !!!Collection: 03.+04.06.2026!!! Dedpfx Aeyztf Nodwocf

Year of construction: 2019, operating hours: 13,324 h, condition: used, machine/vehicle number: 298546, Travel distances (x/y/z): 230/100/575 mm, power: 47.4 kVA, weight: 5,600 kg, 16-position tool changer, Y-axis, new main spindle mid-2025, chip conveyor, 1 tool cabinet with 7 drawers, with accessories, LNS Quick Load Servo 65 bar feeder, serial no.: 17000 200363, year of manufacture: 2025, 1 mesh box with accessories, 1 stool, !!!Collection: 21st + 26th May 2026!!! Dcsdpfsyztgajx Adwjf