Used Gesan Dv 180 for sale (21,808)

Condition: excellent (used), Vötsch Type: VC 4200/S Climate test chamber 2500 liters water-cooled Temperature test: Temperature range -40°C to + 180°C Temperature deviation in time: ± 0.3 to ± 1.0 Spatial temperature deviation: ± 1.0 to ± 2.0 Temperature gradient 2 to 4 Heating speed: 2.0 K/min Cooling rate: 3.0 K/min Climatic tests: Temperature range: +10 °C to +90 °C Temperature deviation over time: ± 0.1 to ± 0.5 Temperature deviation over time: ± 1 to ± 1.5 Temperature gradient 2 to 3 Humidity range: 10% to 98% r.h. Humidity deviation over time: + 1 to 3 % r.h. Dew point range +5 to +89°C Test room dimensions: Width approx. 2000 mm x depth 1150 mm x height 1150 mm External dimensions: Width approx. 3500 mm x depth 1450 mm x height 2100 mm Nominal voltage 3/N/PE AC 400 V ±10%50Hz Rated power 13 kW Nominal current 21 A Refrigerant R-452A Bolineu Au Utjlxtowl Weight approx. 1350 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2015, DrillMatic TA325/P/H/12/2/1/-180° rotating hydraulic/pneumatic index table 400x620 Manufacturer: DrillMatic Type: TA325/P/H/12/2/1/-180° Air connection: 4 ports. Index values: 3 4 6 8 12 Year of manufacture: 2015 Bwjlinoukg Srjlxtsl Weight: 66 kg Table size: 400x620mm

Condition: used, Year of construction: 2021, Transnorm belt curve conveyor right GKF 180°-1270-1100-IR1200 RA1946 Technical data: Conveying length middle radius (NL): 5498 mm Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm Bwjliov Ir S Aenlxtel belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, total height: 7,509 mm, total width: 9,380 mm, total length: 2,330 mm, load capacity per storage section: 300 kg, payload: 180,000 kg, type of input current: three-phase, input voltage: 400 V, table height: 890 mm, net weight: 16,371 kg, nominal voltage: 400 V, input frequency: 50 Hz, Equipment: safety light barrier, - Multi-Space consisting of 6 coupled lift units, 5 removal points at a height of 890 mm, one unit with maintenance flap - with 19-way optoelectronic identification system for filling material height measurement, when using containers with 37.5 mm intermediate grid, detection of filling material from a diameter of 5 mm, must not be transparent. Overhang control at the front and rear, provided that the overhanging stored goods interrupt one of the light barriers in the storage area - Energy-efficient, glare-free lighting of the removal points, LED technology with plexiglass cover - Equipment for emergency operation - Lean-Lift EcoDrive with integrated feedback unit - Keyboards on top of the universal arm, each mounted right below the lighting panel at all removal points Boljv Hna Hsinlxtewl - High-speed doors for removal opening - Container weighing device at the removal points - 899 storage profiles, storage notches every 75mm - Container load: 300kg with even load distribution - Device load: 12x15,000kg = 180 t - incl. 100 containers 1300x635x57mm, galvanized - Microprocessor control MP 12N-H-TFT, host communication via TCP/IP, TFT color display 800x600 - USB connection for barcode reader, Ethernet 100Mbit connection - Safety light curtain at all outlets - Drive: 400V three-phase current, 50Hz, 5.0KW, 100% duty cycle, lift 18KW, horizontal drive 1/2/3 with 0.37/0.55/0.37KW, fuse 50 A slow-blow, supply line 5x10mm², separate protective conductor 2.5mm², for connection to TN network (L1/L2/L3/N/PE) according to IEC-60364-1

Condition: refurbished (used), Functionality: fully functional, load capacity: 150 kg, controller manufacturer: Kuka, controller model: KRC4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: Bolinsrwnphslxtewl - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: good (used), Watson Marlow 120U/DV peristaltic pump *New price 9100 The 100 series pumps are the ideal choice to maximize yield in fermentation and cell culture applications. These pumps offer not only high performance and reliability, but also ease of use for single-use systems. A flawless tube change takes only a few seconds, further increasing the efficiency of your processes. Biopharmaceutical processes require precise and repeatable pump performance that is easy to validate. Our 100 series, with its exceptional speed range of 2,000:1, offers the flexibility and purity essential for drug testing. The keypad lock secures your pump parameters to ensure consistent and repeatable performance. Technical data: Protection class housing IP 31 Maximum pressure 30 psi Model 120 U/DV Flow rate 0.001 to 170 ml/min at 30 psi Motor speed 0.1 to 200 rpm Temperature 5 °C to 40 °C Pump weight approx. 2 kg Torque 0.4 Nm continuous operation Noise level < 60 dB(A) at 1 m distance Standard CE, cETLus Power supply Supplied with 24 VDC mains transformer plug Condition: used Bjlinlxsttzgdjtowl You can find more laboratory devices - new and used - in our store! International shipping costs on request!

Condition: excellent (used), CTS Type: C-40/1000 CTS climatic test chamber Condenser chiller air-cooled Control: 32 bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Bwelinjru Dzuelxtel Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature test: Temperature range: -40°C to +180°C Temperature change rate Heating speed 2.0 K/min Cooling rate 2.5 K/min Temperature deviation ± 0.1 to ± 0.3 K in time Heat radiation: approx. 2500 W at +20°C approx. 2500 W at ± 0°C approx. 1500 W at -20°C Climate Working range: Temperature range +10°C to +95°C Humidity range 10 to 98% r.h. Dew point range I +7 to +94°C Dew point range II -10 to +7°C Temperature deviation ± 0.1 to ± 0.3 K in time Humidity constancy I, temporal ± 0.5 to ± 1.5 % r.h. Humidity constancy II, temporal ± 1 to ± 3 % r.h. Panorama window 570 x 710 mm Test chamber dimensions Width 1000 mm Depth 1100 mm Height 900 mm External dimensions Width 1270 mm Depth 2220 mm Height 1950 mm Test chamber volume 1000 liters Pipe feed-throughs, ø 50 Electrical connection: 400 V +6/-10% 3/N, PE 50 Hz Connected load: 8.4 kW Rated current: 12.4 A Refrigerant: R-404A Weight: 800 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Side mills Bolinlslvt Eqjxtewl Zerma Year of manufacture 2005 Type: GSL -18AMIS)

Condition: used, Year of construction: 2015, Transnorm curved belt conveyor left bend 180°-700-600 IR750 RA2329 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 180° nominal/external width (NB): 700 mm belt width (GB): 600 mm innerradius (IR): 750 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71M4/TH Electrical Data: 380-500 V, 0,55 kW Conveying speed: please contact us Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Bjlinlou S I Rkextowl Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: good (used), Functionality: fully functional, mileage: 345,545 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, loading space length: 4,450 mm, loading space width: 2,140 mm, loading space height: 2,300 mm, color: white, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, central locking, MAN TGE 3.180 CENTINA WITH TARPAULIN 2.0 180 HP EURO 6- CC 1968- HP 180- KW 130- YEAR 12/2021- KM 345354- CAPACITY 880 kg- INTERNAL LENGTH 4450 mm- WIDTH 2140 mm- HEIGHT 2300 mm- ABS- AIR CONDITIONING- CRUISE CONTROL- CENTRAL LOCKING- FOG LIGHTS- RADIO- ELECTRIC WINDOWS- ELECTRIC MIRRORS- RACK- Bwjliovpgltenlxtsl

Condition: refurbished (used), Functionality: fully functional, load capacity: 210 kg, controller manufacturer: Kuka, controller model: KRC4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Bwelinsrqf Tkelxtol Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: excellent (used), Meidinger S-HRZ10C/180/750/2 centrifugal fan Meidinger S-HRZ10C/180/750/2 Centrifugal fan V m³/h: 2410 Pst Pa: 28913 Pt Pa: 29329 n 1/min: 4800 Position: LG270 Year of construction: 2006 p kg/m³: 1,2 t °C: 20 Pv kW: 29,17 Bwjlinlxsim Ifuotsl Engine size: 200 number of poles: 2 Type: B3 Rated power: 30 kW More centrifugal fans in other sizes - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), Here we offer a Weiss temperature chamber. Weiss temperature test chamber With S!MCON / 32 control Water-cooled (refrigerant converted to R-452A) Touch panel" control unit All control and operating commands can be triggered on the "touch panel" control unit by simply touching the function icons. all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm Test chamber capacity: approx. 335 liters Test chamber dimensions: Height 750 mm, width 580 mm, depth 765 mm External dimensions: Height 1775 mm, width 870 mm, depth 1600 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate Heating: 3.2 K/min Cooling: 4.0 K/min Heat compensation max. 2300 W Data for operation: Test room lighting Halogen bulb 2x 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Rated power 4.1 kW On-site fuse 16 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 56 dB(A) Refrigerant: R-452A Weight: 515 kg Type: WT3-340/40 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Bjlinlxsrbigfstewl Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: ready for operation (used), A profile hardening system (inductor) AEG-Elotherm Elomat V/N/180/3 is available. The nominal output is 200kW. The system is fully functional and is offered including various coils. Bslinlxottv Trotowl

Condition: new, Year of construction: 2020, Transnorm belt curve conveyor left GKF 180°-800-700-IR200 - Exhibition machine RA2317 Technical data: Frame width (NB): 800 mm, 2000 mm Diameter Frame width with Bearing cover and motor: 2200 mm Diameter belt width (GuB): 700 mm height (BH): 200 mm height with motor (MH): 350 mm Bwelinlxsvadknotel Inner radius (IR): 200 mm Conveying angle: 180° degrees Conveying speed (v m/s): 0,38-1,14 m/s Drive: Nord gear Motor with Frequency converter for stepples speed controll Electrical data: 50Hz V380-500, kW 0,37 / S1 Year of construction: 2020 Incl. support, current height 820mm Optionally available: Supports, if deviating from the current height Sideguides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Here we offer a climate test chamber. Climate cabinet RS SIMULATORS KS600/70 AIR COOLED Climatic test chamber -70/180°C + humidity Last maintenance and leak test carried out 03/2024 by RS simulators Here we offer a climate test chamber. RS climate test chamber air-cooled Refrigerant: R404/R23 Temperature range -70°C to + 180°C Time deviations +/- 0.5 K with empty test chamber Bslinovu Ui Relxtowl Average heating and cooling time approx. 2 K / min Humidity range 10% to 95 % External dimensions: width 1200 mm depth 1600 mm x height 1995 mm Test chamber dimensions width 840 mm x depth 840 mm x height 840 mm Nominal voltage: 3/N/PE AC, 400 V, 50 Hz Nominal power: 7.5 KVA Nominal current: 15 A Fuse, on-site: 16 A slow-blow Side feedthrough Cabinet is air-cooled Refrigerant R-404A/R23 Weight approx. 600 kg Type: KS 600/70

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punching tool: 2 columns -Punching dimensions: see photo -Dimensions: 180/75/H1100 mm Bjlou I Hpysinlxtjwl -Weight: 2.0 kg

Condition: excellent (used), Vötsch Type: VC³ 4018 Vötsch climate test chamber VC³ 4018 air-cooled Technical data: Bolinlevpt Inextjwl Test room dimensions: width 580 mm x depth 450 mm x height 750 mm Housing dimensions: width 870 mm x depth 1550 mm x height 1800 mm Test room volume: 190 liters Implementation built into basic equipment R1: ® 125 mm L1: © 50 mm Data for temperature tests: Temperature range: -40°C to +180°C Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.5 K Temperature change rate Heating 4 K/min Cooling 4 K/min max. heat compensation 2300 W Data for climate tests: Temperature range + 10 to +95 °C Dew point range -3 to +94 °C Humidity range 10 to 98 %r.h. Temperature deviation over time ± 0.1 to ± 0.3 K Temperature homogeneity spatial ± 0.5 to ± K Humidity deviation over time ± 1 to ± 3 %r.h. Heat compensation 400 W Data for operation: Test room lighting halogen bulb 2 x 24V, 50W 3/N/PE AC 400V±10% 50 Hz Rated power 4.1 kW Rated current 14 A Weight: 470 kg For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 1994, Transnorm roller curve conveyor right 180°-770-700 IR 800 RA2350 Technical data: Manufacturer: Transnorm Type: TS 2712 curved belt 180° RIGHT Built: 1994 Condition: good (used) Engine: fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 770 mm Clamping length: 700 mm Side guide: inside and outside Engine Type: SEW Gear Motor + MOVIMOT Inverter Engine Power: kW 0.37/0.075 S1 Hz 50 A 1.30 Drive: Center drive Conveyor speed: adjustable from 0.1 to 1.0 m/s Weight: 210 kg Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Bwolinlsvu Ihtjxtol Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Starter Bosch -Manufacturer: Bosch starter 12 V, unfortunately without type designation -Voltage: 12V -Teeth: 10 -Magnetic coil: Type -Dimensions: see photos -Total dimensions: 340/180/H115 mm -Weight: 13.8 kg Bsleit Rmfjinlxtjwl

Condition: excellent (used), White Type: WKL 100/70 Air-cooled with humidity -70 to 180°C Test chamber capacity approx. 100 liters Weight 210 kg Internal dimensions: Height 400 mm Width 470 mm Depth 345 mm External dimensions: Height 1776 mm Width 745 mm Depth 980 mm Data for mechanical stress: Maximum load on the test chamber floor 10 kg 10 kg per grate insert Total load on the grate supports 50 kg Data for operation: Test chamber lighting halogen bulb 24V, 50W Nominal voltage 1/N / PE AC 230 V ± 10% 50 Hz Nominal power 3.5 kW Nominal current 15.2 A Fuse provided by the customer 16A slow-blow Protection class Control cabinet IP 22 and control panel IP 54 Heat emission air-cooled test cabinets: Max. heat emission to the environment 2500 W Noise measurement Sound pressure level free field measurement at a distance of 2 m from the front and 1.0 m high approx. 59 dB(A) Characteristics for temperature tests Temperature range -70 to +180°C Temperature differences in steady state Temperature fluctuation over time in the middle of the usable space ± 0.3 to ± 1 K Temperature deviation spatially ± 1 to ± 2 K Temperature change rate Heating 3.5 K/min Cooling 3.5 K/min Heat compensation max. 700 W Characteristics for climate tests Data for humidification system Contents of the storage tank approx. 13 l Water quality Demineralized pH value 6 – 7 Conductivity max. 20 μS/cm Water consumption at constant temperature +40 °C, 92 %RH 2 l / 24 h Beljvpgnuoinlxtewl Temperature range +10 to +95 °C Humidity range 10 to 98 %RH Temperature and humidity differences (in steady state) Temperature fluctuation over time in the middle of the usable space ± 0.3 to ± 0.5 K Temperature deviation spatially ± 0.5 to ± 1.5 K Humidity fluctuation over time in the middle of the usable space ± 1 to ± 3 %RH Flow through 50 mm ∅ Interfaces: Ethernet interface (RJ45), USB interface Refrigerant: R404A / R 23 For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump,, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Enerpac, hydraulic hand pump -Type: unfortunately without type designation -Pressure range: bar -Housing: aluminum -Number: 1x hand pump available -Price per piece -Dimensions : 700/180//H170 mm -Weight: 8,9 kg/pc. Bolinjkahi Uolxtjwl

Condition: used, Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake Bwjlinjb A Nlqjlxtol -Tool: for press brake -Tool radius: 8.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg

Condition: used, Clamping angle for workpiece clamping Bwelinlxjb E N Ttstel -Dimensions: 180/70/H100 mm -Thickness: 18 mm -T-slots: 12 mm -Surface: milled -Weight: 3.5 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Tube diameter outside: 180 mm -Piston: Ø 115/145 mm -Stroke: 620 mm -Weight: 87 kg Bolijb A H Rysnlxtjwl