Used Gesan Dvs 180 for sale (6,368)

Year of construction: 2019, condition: excellent (used), Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber (Special Edition)!! Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Machine Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Test Chamber Volume: approx. 340 liters Description For sale is a used Vötsch ClimeEvent C/340/70/5/S temperature and climate testing chamber from 2019. This unit is a rare special edition with three side-pull-out telescopic test drawers. The test specimens can be conveniently prepared and connected outside the test chamber and then inserted into the test chamber. This makes the system particularly suitable for series testing, development tasks, long-term tests, and applications with frequent sample changes. Each test drawer features a stainless steel grid basket and a separately lockable front with its own test specimen port. The three separate test levels allow for a clear arrangement of several test specimens or assemblies within a single test chamber. The system is equipped, among other things, with WEBSeason Touch control, temperature and humidity control, Donaldson compressed air treatment, and extensive documentation. The system is suitable for: Temperature tests Climate tests Environmental simulation Material testing Electronics testing Component testing Battery testing Sensor testing Quality assurance Research and development Aging and stress tests Technical Data Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Test Chamber Volume: approx. 340 liters Temperature Range: approx. -70 °C to +180 °C Temperature Change Rate: approx. 5 K/min Max. Heat Compensation: approx. 3,000 W Temperature Deviation (time-dependent): ±0.1 to ±0.5 K Temperature Homogeneity (spatial): ±0.5 to ±1 K Temperature Gradient: ≤2 K Power Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated Power: 9 kW Rated Current: 20 A Refrigerant 1: R449A – 2.50 kg Refrigerant 2: R23 – 0.75 kg Max. Low Pressure: 21 bar(g) Max. High Pressure: 25 bar(g) Stand Pressure R23: 13 bar(g) Dimensions External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Test Chamber Dimensions (H x W x D): approx. 750 x 580 x 765 mm Weight: approx. 650 kg Equipment WEBSeason Touch Panel Temperature and Humidity Control Stainless Steel Interior Large Observation Window 3 side-pull-out telescopic test drawers 3 stainless steel grid baskets Separately lockable drawers Heated drawer ports Test specimen ports Donaldson Ultrafilter for compressed air treatment Shipping Information External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Weight: approx. 650 kg Condition Gbedezp Nv Dspfx Actjw Used The unit has been workshop-tested and subjected to a documented test run. The optical condition corresponds to the images. Scope of Supply Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber 3 telescopic test drawers 3 stainless steel grid baskets Donaldson Ultrafilter Accessories according to images Shipping or forwarding possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Year of construction: 2008, functionality: fully functional, Single-head welding machine Gbedszpyfcspfx Actjw

Condition: used, mileage: 5,375 km, power: 96 kW (130.52 HP), first registration: 02/2025, fuel type: gasoline, overall weight: 2,118 kg, fuel: regular/benzine 91, energy efficiency: F, CO₂ emissions: 157 g/km, fuel consumption (urban): 6.9 l/100km, fuel consumption (extra-urban): 6.9 l/100km, fuel consumption (combined): 6.9 l/100km, color: yellow, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 5, total width: 2,159 mm, total height: 1,811 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, trailer coupling, E07 Hill-start assist, LG7 LED High Performance headlights, Z6L Progressive, E1K Navigation package, FC5 Windshield with heat-insulating glass, FR8 Rear-view camera, P2W Advantage package, Q10 Crossmember for trailer coupling, SA4 Airbag for driver and front passenger, 502 Digital extra: Updates for intelligent speed assistance system, 805 AEJ X4/1, B25 Parking brake, electric, BA3 Active brake assist, BB0 Braking system with ABS and ASR, BB3 Electronic stability program (ESP), C0Z Door sill trims with "Mercedes-Benz" lettering, C1J Gear shift knob in leather, C6L Multifunction steering wheel, CK4 Handle strip above license plate in vehicle color, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, CM0 Bumpers painted, D11 Roof rails with integrated base carrier, E1D Digital radio (DAB), E1E Digital extra: Hard disk navigation, E3N Digital extra: Extended MBUX functions, E3P MBUX multimedia system and navigation with 9.5-inch display, E4S Digital extra: Smartphone integration, EC5 Pre-installation for digital extras, EI0 Wireless charging system for mobile devices, EM7 2 USB ports in the center console at the rear, ES1 12 V socket in the passenger compartment, ES2 12 V socket in the trunk/cargo area, EW6 Digital extra: Remote Services Plus, EX8 Digital extra: MBUX Navigation Plus, EY2 Digital extra: Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F4W Windshield washer fluid reservoir with larger capacity, F56 Mirror in passenger sun visor, F58 Mirror in driver sun visor, F59 Exterior mirrors, electrically foldable and adjustable. We will gladly calculate an individual financing or leasing offer for you and accept your used vehicle in trade. We look forward to welcoming you to our dealership for further consultation. Vehicle condition corresponds to age/mileage; touch-up paintwork has been carried out on the vehicle as part of the preparation. No liability for printing and typographical errors. Errors and prior sale excepted... more on our website. Gsdpfszxgzijx Actobw

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21801012535, empty load weight: 3,860 kg, maximum load weight: 14,140 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2026, next inspection (TÜV): 06/2027, loading space length: 7,750 mm, loading space width: 2,480 mm, loading space height: 1,200 mm, total length: 9,925 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: silver, Year of construction: 2026, Demonstration vehicle - Please note: images shown are archive photos. The vehicle may currently be in use! #Chassis – centre-axle trailer - Fine-grain steel welded construction - Outer frame slightly angled, new design, featuring a "Load Lock" profile for lashing strap attachment - 1 pair of geared landing legs front, semi-round base plate, shock-compensating foot, single-side operation, direction of travel right - 1 pair of geared landing legs rear, semi-round base plate, shock-compensating foot, single-side operation, direction of travel right - 2 wheel chocks with holder - Side impact protection, aluminium - Underrun protection, steel - Quarter-shell mudguards - 2 plastic tool boxes with drawer and insert shelf, w=650 / h=520 / d=670 mm, lockable with a padlock #Towing gear – centre-axle trailer - Drawbar with certified 50 mm towing eye, general haulage version - Lower coupling head on drawbar - Folding bracket with spring support on drawbar, guiding the connecting cables to the truck #Axles + suspension - SAF disc-brake axles, 430 mm disc diameter - "Axles/chassis laser-measured" reducing tyre wear and fuel consumption - Air suspension with lift & lower valve #Wheels and tyres - 385/65 R 22.5", manufacturer's choice - Steel rims, factory silver #Braking system - Two-line compressed-air braking system - Spring-loaded parking brake - Vehicle stability system - Duomatic connection front, with connecting line to towing vehicle, direction of travel right - EBS electronic braking system, EBS connector front with connecting cable #Electrics - 24V multi-chamber LED lights, yellow LED side marker lights, LED number plate light (note: false fault warnings possible with certain towing vehicles despite correct function) - 2 white position lights front - 2 white/red outline marker lights rear - 1x 15-pin plug front with connecting cable, direction of travel right - Reversing camera system, colour flat-screen monitor, wireless link, screen with suction-cup mount, powered via 24V vehicle socket #Floor - Phenolic-coated plywood, approx. 30 mm, high point-load capacity - Note: floor warping possible due to weather - "Premium floor sealing", sealed all round - Platform length approx. 7,750 mm #Front wall / front corner posts - 25 mm aluminium hollow-section, 1,950 mm high, corner posts steel, reinforced profile, +2 additional centre supports - Front wall internally lined with 1,250 mm high phenolic-coated plywood #Centre stakes - 2 pairs of folding stakes at side-board height, foldable and removable Godpfxjzw Ep Ns Actebw #Side boards - 25 mm aluminium hollow-section, 700 mm high, foldable and removable, without tarpaulin rail #Rear wall / rear corner posts - 1 pair of folding stakes at side-board height, foldable and removable - 25 mm aluminium hollow-section, 700 mm high, foldable and removable, with internal folding step #Country of registration / plates - Warning plate ECE-70 - Warning plate "A" for waste transport, foldable - ADR warning plate at rear, foldable #Paint finish - Frame hot-dip galvanised incl. passivation - "15-year warranty against corrosion perforation"

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,500 kg, maximum load weight: 15,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,260 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Fliegl “V-Stream” frame Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy 20"-based arms for 7.15- and 7.45-meter swap bodies Note! Not suitable for 20" containers, or only possible if the container has a tunnel or opening at the front center approximately 200 mm long and 800 mm wide! Swivel frame with heavy-duty ball bearing swivel ring 2 wheel chocks with holders Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Half-shell fenders Rear mud flaps across the entire width *Trailer Coupling Device (Turntable) Towing fork with certified 40 mm tow eye Spring-loaded towing fork height adjustment *Axles + Suspension Gbodpszd U Uuofx Actew SAF disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system; color-coded lines for easy servicing. Air reservoir: 208 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Brake System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift/lower valve, hold function in both lower and lift positions *Wheels and Tires 385/65 R22.5" Manufacturer’s choice Steel rims, factory silver, ET 120 *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof connectors at the front, with connecting cable, 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear *Paint finish Frame Hot-dip galvanized or painted according to customer specifications Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Year of construction: 2013, condition: used, Angle transfer 180°, manufacturer Venjakob VEN TRANS Technical data:- Type. VEN TRANS - Manufacturer: Venjakob - Year of construction:2013 - Max. part length: 5.500mm Gjdpfx Acezf N Irjtebw (part length 6,000mm on request) - Infeed roller conveyor Length: 6100 mm Roller width: 1400 mm Roller diameter: 60 mm Pitch: 140 mm Infinitely variable feed rate - Cross transfer with carriage and lifting rake - Lifting-lowering, pneumatic - Length of transfer arms: 4600 mm - Number of rakes: 43 pieces - Distance between the rakes 140 mm - Outfeed roller conveyor Length: 6,100 mm Roller width: 1400 mm Roller diameter: 60 mm Pitch: 140 mm Feed infinitely variable - Connected loads: - Electrical: 400 V, 50 Hz, 3 phases - Location: At the warehouse in D-32825 Blomberg

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21801012090, empty load weight: 2,800 kg, maximum load weight: 15,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,300 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, color: silver, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Drawbar Trailer for Roll-Off Containers * High-tensile steel welded chassis construction * Sliding frame system: * The container is loaded from the rear onto the sliding frame and pushed forward * Front container stop adjustable for 6.0 m, 6.5 m and 7.0 m roll-off containers with external rollers * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Designed for the transport of roll-off containers with subframe according to DIN 30722 * Heavy-duty turntable with ball-bearing slewing ring * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Semi-circular mudguards * Rear impact protection, mounted vertically on left and right side, with delta rubber buffers on underrun protection brackets * Spare wheel carrier for 1 spare wheel, including wheel mounting kit * Plastic toolbox with drawer and shelf insert, dimensions: 650 x 520 x 670 mm (W x H x D), lockable with padlock ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * SAF disc brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension with raise-and-lower valve ### Wheels & Tyres * 385/55 R 22.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system Gbodpjzggicjfx Actow * Spring-loaded parking brake * Drive-away protection: opening the container locking system automatically activates the spring-loaded parking brake * Vehicle Stability Control System * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * EBS (Electronic Braking System) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 additional LED work lights at the rear, activated via reverse gear * 2 x 7-pin non-interchangeable front plugs with connecting cable ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Drawbar: black KTL coating (cathodic dip coating) --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: excellent (used), Year of construction: 2016, Fish / Sardine procesing line SIA "PERUZA " Type of fish - Sardine Fish length - 140/180 mm Fish per kg - 44/27 # Fish condition Fresh; defrosted (not recommended) Equipment characteristics Productivity (for one autonobbing head) - Up to 200 fish/minute Connections -Electricity Voltage - 400 V Phase - count 3 - Frequency - 50/60 Hz Power (for one autonobbing line) - 8 kW Power (for one vacuum system) - 7.5 kW Power (for Nobbing machine for rigor mortis fish) - 0.75 kW Power (for logistic conveyour system) -5 kW Water Pressure >3 bar Other data : Humidity resistance IP 65 - Materials used - Stainless steel AISI 304, AISI 316, Plastic ERTALON 6SA, POLYURETHAN, PE HD 500 Environment - Indoors (temp. +10....+35 Gbodpfozhibksx Actew -

Year of construction: 2002, condition: used, functionality: fully functional, The Getecha grinding mill, model GRS 180 with water cooling, is for sale. Power: 2.2 kW Blades: 3 pieces Godpfoy Ugiuex Actsbw Screen: 6 mm

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,250 kg, maximum load weight: 14,750 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 10,020 mm, total width: 2,550 mm, total height: 1,120 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis for central-axle swap trailers Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy 20"-based arms for 7.15 m, 7.45 m, and 7.82 m swap bodies (Note: When used in combination with the impact guard, the guard protrudes beyond the 7.15 m swap body) Gbedpfezd Trrsx Actow 1 pair of front gear-driven support legs, with straight lower section and single-sided operation on the right side 1 pair of rear gear-driven support legs, with straight lower section and single-sided operation on the right side Side impact protection set inward, for optimal clearance to the swap body supports Steel underrun protection Rear mud flaps across the entire width *Towing equipment for central-axle trailers Towing beam with certified 50 mm tow eye, freight forwarding version Towing beam clamped/bolted, easily replaceable and partially adjustable in length! Lower coupler on towing beam, free towing beam length approx. 2200 mm Folding bracket with spring support on the towing beam, for routing the connection cables to the truck *Axles + Suspension SAF disc brake axles “Laser-aligned axles/chassis” reduces tire wear and fuel consumption Air suspension without lift axle *Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Air reservoir: 208 liters Spring-loaded parking brake Duomatic connection at the front, with connecting line to the tractor unit, connection at the rear right 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, connection at the rear right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve, hold function in both lower and lift positions Vehicle – Vehicle Stability Control System Brake release function via a pushbutton on the vehicle next to the lift & lower valve, for releasing the brake while coupled; EBS power supply must be ensured! *Wheels and Tires 385/55 R22.5" Manufacturer's choice Steel rims, factory silver *Electrical System 24 volts, multi-chamber LED lights, yellow LED side lighting, LED license plate lighting, (Note: With certain towing vehicles, false diagnostics may occur even though the function is working properly) 2 white LED front position lights 2 white/red LED rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, connection on the right rear Additional LED work light(s), recessed and integrated into the rear, activated via the reverse light LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Country of Registration/License Plates Germany With DEKRA approval and certification (per §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Warning sign per ECE - 70 ADR warning sign at the rear, foldable Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint finish Frame Hot-dip galvanized or painted according to customer specifications

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,250 kg, maximum load weight: 14,750 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 10,020 mm, total width: 2,550 mm, total height: 1,250 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with central-axle trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy 20"-based arms for 7.15 m, 7.45 m, and 7.82 m swap bodies (Note: When used in combination with the impact guard, the guard protrudes beyond the 7.15 m swap body) 1 pair of front transmission support legs, with straight lower section and single-side operation on the right rear 1 pair of transmission support legs at the rear, with straight lower section and single-side operation on the right side 2 wheel chocks with holders Aluminum side impact protection Side impact protection set inward, for optimal clearance to the swap body supports Steel underrun protection Rear mud flaps across the entire width Half-shell fenders Mud flaps *Towing Equipment for Central-Axle Trailers Towing beam with certified 50 mm tow eye, freight carrier version Flat flange plate for tractors with a clearance-type low-bed trailer, connected to the towing beam at the top and bottom Towing beam clamped/bolted, easily replaceable, and partially adjustable in length! Lower coupler drawbar, free drawbar length approx. 2200 mm Fold-down bracket with spring assistance on the drawbar, for routing the connection cables to the truck *Axles + Suspension BPW disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Air suspension *Brake system 2-line compressed air brake system Color-coded wiring for easy servicing. Air reservoir: 208 liters Air-spring parking brake, Control panel at the rear right Duomatic connection at the front, with connecting line to the tractor unit, connection at the rear right 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, connection at the rear right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift and lower valve, hold function in both lower and lift positions Vehicle - Vehicle Stability Control System *Wheels and Tires 385/65 R22.5" Manufacturer's choice Steel rims, factory silver *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting Connectors for electrical and air connections on the drawbar 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, connection at FR-right 2 additional LED work lights, recessed and integrated into the rear, activated via the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Country of Registration/License Plates Germany With DEKRA approval and certification (per §13 EG - FGV) Gbedpfx Aszd Udcsctsw 24/7 service hotline Prepared for single-line license plate holder Warning sign per ECE - 70 Night parking sign front and rear Contour markings with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint finish Frame Hot-dip galvanized or painted according to customer specifications

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 14,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,970 mm, total width: 2,550 mm, total height: 1,250 mm, suspension: air, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis for central-axle trailer Fine-grained steel welded construction Front stop, transverse, in a foldable/adjustable design, as previously delivered with AU 257359 Godpfx Aezd U I Uoctjbw 1 pair of removable guide rollers, front and rear 1 additional pair of removable guide rollers 4 container locks with sturdy arms based on 20" for swap bodies 7.45 m and 7.82 m 1 pair of front transmission support legs, with straight lower section and single-side operation on the right side 1 pair of rear transmission support legs, with straight lower section and single-side operation on the right side (FR) Side impact protection set inward, for optimal clearance to the swap body supports Steel underrun protection *Towing equipment for central-axle trailers Towing beam with certified 50 mm tow eye, freight forwarding version Flat flange plate for tractors with underrun-protected LBW, connected to the drawbar at the top and bottom Drawbar clamped/bolted, easily replaceable and partially adjustable in length! Under-coupler drawbar, free drawbar length approx. 2150 mm Folding bracket with spring support on the drawbar, for routing the connection cables to the truck *Axles + Suspension SAF or BPW disc brake axles “Laser-aligned axles/chassis” reduces tire wear and fuel consumption Travel odometer/odometer Air suspension *Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Air reservoir: 208 liters Spring-loaded parking brake, Control panel in the front right Duomatic connection at the front, with connecting line to the tractor unit, connection in the front right 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, connection in the front right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve, hold function in both lower and lift positions Vehicle – Vehicle Stability Control System Brake release function via a pushbutton on the vehicle next to the lift & lower valve, for releasing the brake when coupled; EBS power supply must be ensured! “TPMS” Tire Pressure Monitoring System according to ECE R 141, display in the towing vehicle via EBS *Wheels and Tires 385/65 R22.5" steel rims, factory silver *Electrical System 24 volts, multi-chamber LED lights, yellow LED side lights, LED license plate lights, (Note: With certain towing vehicles, false diagnostic errors may occur even though the system is functioning properly) Yellow LED side lights linked to the turn signals “Flashing side lights” Parking sockets for electrical and air connections on the drawbar 2 white LED front position lights 2 white/red LED rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, located on the right rear 2 additional LED work lights, recessed and integrated into the rear, activated by the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Prepared for single-line license plate holder Night parking sign at front and rear *Paint Finish Frame Hot-dip galvanized or painted according to customer preference

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Gearbox manufacturer: MOTOVARIO TKF/5 -Engine manufacturer: -Motor power: 0.37 kW -Speed range: 35-180 rpm -Motor: adjustable -Diameter hollow shaft: Ø 24 mm -Construction: B3 angle -Number: 1 piece of motors available Gjdsc Nnanjpfx Actjbw -Price: per piece -Dimensions: 445/190/H265 mm -Weight: 21 kg

Year of construction: 2017, condition: used, Metering rotary valve, rotary valve, metering valve, rotary valve for screw conveyor, screw conveyor, screw conveyor, conveyor technology, screw conveyor -Manufacturer: olocco, rotary valve type VPS 180 -Inlet opening: Ø 120 mm -Outlet: 150 x 115mm Godpsh Ay R Esfx Actobw -Shaft: Ø 25 x 60 mm -Dimensions: 320/250/H245 mm -Weight: 27 kg

Condition: excellent (used), To automatically turn up-side-down (180°) the workpieces (stack of panels) Entry and exit of the panels in the longitudinal direction Manages one stack of panels per time Gjdpfxjgvpn Is Actsbw Min/Max thickness of the stack mm 1000 / 1600 Working width (min/max) mm 300 / 1300 Useful working length (min/max) mm 500 (min) / 3000 Separate electric and command panel Total installed motor power Kw 4,3

Condition: new, Equipment: crane, Two-axle truck, 180 hp, brand new, 0 km, fitted with a 4.10 x 2.55 m three-way tipper body, PM series 23.5 crane with 5 hydraulic extensions + jib with 2 hydraulic extensions, 4 stabilizers, remote control, manual transmission, Euro 6 compliant. Gedpsvnu D Iefx Actjbw Please note: The vehicle description is provided for informational purposes only and may contain errors or inaccuracies. We therefore invite you to contact us to verify the accuracy of the data.

Condition: used, Vötsch VTSR 7034/S Climate Testing Chamber -70 to +180°C Manufacturer: Vötsch Type: VTSR 7034/S Test chamber volume: 335 liters Climate testing chamber Temperature range: -70 to +180°C Supply voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated current: 22 A Rated power: 12.5 kW Refrigerant (cooling): R 404 A Refrigerant (heating): R 23 Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Year of manufacture: 2002 Gjdpfx Acjuuif Nstobw TK-11 More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Bezel, moving bezel, bezel, steady rest, lynette Gbedpfx Ajt Trx Ajctsw -Bezel: moving -Tip height: 180 mm -Plating: Brass -Dimensions: see photos / technical drawing -Dimensions: 340/70/H380 mm -Weight: 6.3 kg.

Condition: used, Watson Marlow 120U/DV Peristaltic Pump *New price 9,100 The pumps in the 100 series are the ideal choice for maximizing yield in fermentation and cell culture applications. These pumps not only offer high performance and reliability but also ease of use for single-use systems. Flawless tubing changes take only a few seconds, which further increases the efficiency of your processes. Biopharmaceutical processes require precise and repeatable pump performance that is easy to validate. Our 100 series offers exactly this flexibility and purity with its exceptional speed range of 2,000:1, which is essential for drug testing. The keypad lock secures your pump parameters to ensure consistent and repeatable performance. Technical data: Gbedpfx Acjttzgdstjw - Enclosure protection class IP 31 - Maximum pressure 30 psi - Model 120 U/DV - Flow rate 0.001 to 170 ml/min at 30 psi - Motor speed 0.1 to 200 rpm - Temperature 5 °C to 40 °C - Pump weight approx. 2 kg - Torque 0.4 Nm continuous operation - Noise level < 60 dB(A) at a distance of 1 m - Standard CE, cETLus - Power supply Supplied with 24 VDC mains transformer plug Condition: used You can find more laboratory equipment – new and used – in our shop! International shipping costs on request!

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister Twister FU 180 wood lathe with a center distance of 560 mm. The demonstration machine is in its original condition, so you receive full warranty coverage. Technical Specifications - Center height: 180 mm - Swing over bed: 358 mm (can be extended with optional outboard turning attachment – depending on workpiece) - Center distance: approx. 560 mm (extendable) - Spindle connection: M33 x 3.5 with ASR (Euro) anti-loosening groove* - Spindle and tailstock taper: MK2 - Speeds (2 belt ranges): 50 – 1,230 rpm and 150 – 3,700 rpm - Quill travel: 100 mm (with scale), with trapezoidal threaded spindle - Motor: 1.1 kW / 1.5 HP (230 V) - Total length: 1,345 mm Gedpfxetphy Ae Actobw - Weight, freestanding version: 144 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by carrier: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT If you are interested in this machine, please enter your complete address details in the contact form so that we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, woodworking lathe, turning, woodturning, turning tools, wood turning, machinery Reference: R-A0117

Condition: new, width 800 mm depth 380 mm Gbsdpsu Immlsfx Actow height 1800 mm weight 70 Kg Cabinet with 4 shelves. Maximum load per shelf 40 kg. Color code 7035. Weight 75kg.

Condition: used, mileage: 31,500 km, power: 85 kW (115.57 HP), first registration: 08/2022, fuel type: diesel, next inspection (TÜV): 08/2027, color: red, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, electronic stability program (ESP), immobilizer system, navigation system, parking heater, second-hand vehicle warranty, soot filter, Special equipment: Active safety package, dashboard upper part in Artico leather-look, Audio-Navigation System Plus, velour floor mats, luggage compartment separation (net), interior chrome package, automatic climate control (Thermotronic), light alloy wheels 7x17, light alloy wheels, light alloy wheels 7x17 (5-double-spoke), light alloy wheels, air vents in the rear, metallic paint, navigation package, voice control system with extended functions (MBUX), multimedia system MBUX incl. navigation and DAB, pre-equipment for traffic information system Live Traffic, audio navigation system, parking package, driving assistance system: active parking assist, tow bar crossmember, front seat heating, mirror package, exterior mirrors elect. foldable, interior mirror with automatic anti-dazzle function, socket (12V connection) in the luggage/cargo area, technology package, USB ports, inductive charging cradle for smartphone Gbodpfxezwytce Actsw Further equipment: Sliding door rail cover, vehicle color, airbag on the passenger side can be deactivated, airbag on the driver/passenger side, ambient lighting, anti-slip regulation (ASR), exterior mirrors elect. adjustable and heated, both, exterior mirrors in vehicle color, DAB tuner (digital radio reception), design and equipment line Progressive, door sill trims with Mercedes-Benz lettering, windows for rear doors / tailgate with wiper / washer system, power windows sliding doors, parking brake electric, luggage net / bag on front seat backrest, luggage compartment cover / roller blind, glove compartment lockable, tailgate with glazing, tailgate strip chrome, rear window heated, infotainment system: Mercedes me connect, interior trim: decorative trim in silk matt silver, interior lighting LED, interior mirror, interior trim elevated design, Isofix mounts for child seat in the rear seat, body: 5-door, folding table integrated in the driver and front passenger seat backrest, instrument cluster with color display, communication module (LTE) preparation Mercedes me connect, headrests in the rear (3-way), fuel filter with water separator, radiator grille chrome, lumbar support seat front left, steering wheel with multifunction, steering column (steering wheel) mech. adjustable, Mercedes-Benz emergency call system, center airbag in front, engine 1.5 Ltr. - 85 kW CDI CAT, wheelbase 2716 mm, rear seat backrest split / foldable, low emission according to emission standard Euro 6d, gear / selector lever knob leather, windshield washer tank large design, sliding door cargo / passenger compartment left, sliding door cargo / passenger compartment right, sliding door left with window, sliding door right with window, side airbag (sidebag) and window bag in front, side airbag (sidebag) in front, side windows rear fixed, side windows rear and rear window tinted, seat front left height adjustable, seat front right height adjustable, seat cover / upholstery: Artico leather-look / Dinamica, smartphone integration package, sun visor left with mirror, sun visor right with mirror, start/stop system, socket (12V connection), bumper in vehicle color, carpeting in the passenger / cargo area, carpeting in the passenger area, door handles outside in vehicle color, pre-equipment Remote Service Plus, pre-equipment traffic information system Live Traffic, warm air duct to the passenger compartment, warning system / status display for seat belts in the rear, heat protection glazing, auxiliary heater

Year of construction: 2006, condition: ready for operation (used), A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible Gbjdpswftcvjfx Actsw

Condition: ready for operation (used), Year of construction: 1996, The subject of my auction is a 180-degree roller conveyor with rollers 57 cm long and a conveyor width of 2 m. Gbjdpfx Acsyvftmotow

Year of construction: 1984, condition: ready for operation (used), Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible. Gbedpfxey Uyf No Actsw