Used Floorpul Ruby 55 for sale (6,286)

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure cleaner with vacuum unit on hot-dip galvanized and painted high-quality steel frame with forklift slots. The following models are available:  Vortex Combi 400 or 1000 Sewer Whale - 55 l/min, 160 bar HD pump - 1260 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank  Vortex Combi 400 or 1000 Sewer Salmon - 60 l/min, 200 bar HD pump - 3600 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank HIGH-PRESSURE HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 50-80 m ½" high-pressure hose  Hose: 50-80 m ½" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 35 m ¾" low-pressure hose Tjdpfx Absfdkb Ejajd  Hose: 35 m ¾" low-pressure hose (included) FUEL TANK:  Capacity: approx. 13 l WATER FILTER:  With washable cartridge and drain valve  Filtration grade: 50 Mesh INCLUDED IN DELIVERY:  Multifunction radio remote control IMET; - On/Off motor; - On/Off bypass; - Electric speed control +/-; - Emergency stop button;  Battery charger for radio remote control;  400 or 500 l water tank made of polyethylene; ACCESSORIES AVAILABLE ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint, and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Stair cleaning unit;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request Other available models: VORTEX COMBI 400 Whale E = Fully electric  Vortex Combi 800 Cleaning D Cold water - 800 l sludge tank - 2750 l/min suction capacity - Diesel engines: Yanmar - 15 l/min at 150 bar - HD reel with 20m hose - Radio remote control on request

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust SC 15 from GSL aerial work platform -Tire size: 5.00-8/3.00 Tjdpfx Abjizk Rhoasd -Bolt circle: Ø 110 x 15 mm -Inner diameter: 67 mm Quantity: 1 piece available -Dimensions: Ø 460 x 125 mm -Weight: 20 kg

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW Todpenygvrsfx Abasd 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: used, functionality: unexamined, nominal power (apparent): 210 kVA, For more precise data, see the nameplate Tedpfxsxn S Exs Abajd

Condition: as good as new (ex-display), Year of construction: 2024, Slider length: 3200 mm Cutting width at the rip fence: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 200 mm Scoring saw: yes Saw blade height adjustment: motorized Tsdpfx Aekuzd Hobasd Saw blade tilt adjustment: motorized Rip fence adjustment: manual Saw blade angle display: digital Cutting height display: digital Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 550 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7.5 kW Motor brake: yes / automatic Dust extraction connection: 100 mm and 120 mm Machine length: 3600 mm Machine width: 2000 mm Weight: 1000 kg

Condition: new, functionality: fully functional, Offering punched strip with fabric inlay for hydraulic punching machines and automatic punching presses, approximately 7–9 mm thick, in the well-known qualities BP-50, BP-55, and BP-455, cut to length and pre-prepared with step or wedge joint, including two-component adhesive. Tedpfx Aowduymebaed

Condition: used, Beams for wide-span racking Manufacturer: Mecalux Model: ZE-55 Length: 1900 mm Stock: 60 units Tsdpfx Absyinuyjasd Matching shelves are also available.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 14,336 h, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, total height: 1,473 mm, table load: 1,350 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3-axis HAAS VCE 550 was manufactured in 2001. It features a work spindle with a maximum speed of 7500 rpm, expandable to 10,000 rpm with an optional dual drive. The working area includes dimensions of 508 x 406 x 508 mm, and the table can support up to 1350 kg. Consider the opportunity to buy this HAAS VCE 550 vertical machining centre. Contact us for more information about this machine. • Clamping surface: 660 x 356 mm • T-slot width: 14 mm • T-slot spacing: 125 mm • Tool change operations: 321250 timesMachine still under power Additional equipment • Note: 4th axis is available but defective; power unit for AC servo motor for HRT160 must be replaced. Tjdpfx Abox D Eg Uoasd Technical Specification Through-spindle Coolant Yes Dimensions Machine Depth 2357 mm

Condition: ready for operation (used), Year of construction: 1996, operating hours: 5,387 h, functionality: fully functional, overall weight: 191 kg, total length: 1,500 mm, The machine was a backup unit intended to ensure uninterrupted operation, but its capacity is now too small for our needs, so we are selling it. We’ve only turned it on occasionally over the past 10 years or so. It can be tested on-site. Tedpey Ncn Ajfx Abaod

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Harwi ULTRA PRO 1550 Vertical Panelsaw (Ex Display machine - Zero working hours!) Description Harwi Ultra Pro 2150 Vertical Panel Saw – LOW-DUST OPERATION!!! Showroom model (0 operating hours) Vertical panel saw in as-new condition, showroom model. Ideal for low-dust cutting and sizing of sheet materials such as MDF, OSB, plywood, fire-resistant panels, plasterboard, etc. Thanks to its innovative dust extraction system, up to 85% less dust is generated! Technical Specifications - Horizontal cutting height: 2,150 mm - Vertical cutting height: 2,200 mm - Cutting length: 4,300 mm - Maximum cutting depth: 55 mm - Main saw blade diameter: 250 mm - Scoring saw unit - Scoring saw blade diameter: 70 mm Tedpo Adr Ucofx Abasd - Motor power: 4 kW - Voltage: 400 V, 3-phase - Saw blade speed: 5,000 rpm - Dust extraction connection: 1 × 160 mm - Pneumatically adjustable rear support frame - Electromagnetic clamping for horizontal cutting - Digital readout for horizontal and vertical cutting - TRK version: dust extraction during horizontal cutting - Loading roller - Crosscut guides - Transport rollers with foot pedal operation - Analogue length stop - Strip cutting stop - Programmable stops - Panel support - Guide block for panel support - 24 V control circuit prepared for dust extraction system (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2019, operating hours: 3,974 h, 2019 | JCB 55Z-1 T3 | Used Mini Excavator < 7t | 3974 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 26000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 57 approved ✅ 8 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good general and operating condition. Worn tracks, 4 buckets including 1 tilting cleaning bucket. Hydraulic coupler. See report below. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41444 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Todps Adu Dyofx Abajd 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Ricoh PRO C 5300SL” colour production system Item for sale: 1 x Ricoh PRO C 5300SL with the following specifications: incl. SR5090 finisher incl. Fiery Controller E-27B Not the right configuration? We can easily configure the machine to your requirements. Please feel free to contact us! Counter readings: Total: Approx. 854,377 pages Colour: Approx. 823,414 pages Black: Approx. 30,963 pages Tjdpfx Abe Afulysaed Condition: This is a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested to ensure it is in working order A test print can be seen in the photo Packaging and dispatch: You are welcome to view the machine during our business hours. Please arrange an appointment! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you before dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2025, Spindle tiltable: Yes, -5 to 45° Height adjustment: manual / handwheel Spindle stroke: 142 mm Tilting adjustment: manual / handwheel Tjdpfx Aboxrbihoaod Fence adjustment: manual Height display: scale Tilting angle display: scale Milling fence display: scale Spindle diameter: 30 mm Spindle length: 140 mm Max. tool diameter: 250 mm Speeds: 3500 / 6000 / 8000 / 10000 rpm Motor power: 5.3 kW Motor brake: Yes, automatic Table size: 1000 mm x 520 mm Sliding carriage length: 1200 mm Extraction connection: 2 x 120 mm Machine length: approx. 1200 mm Machine width: approx. 900 mm Weight: 400 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Specification: Vector Speed: X/Y= 50m/min Vector Speed: Z = 15m/min Workpiece length: min. 200 mm Workpiece length: max. 3050 mm Workpiece width: min. 70 mm Workpiece width: max. 850 mm Workpiece Thickness min: 8mm Workpiece Thickness max: 56mm Drill Block with 13 Vertical Spindles Drill Block with 4 Horizontal drills in the X Direction Drill Block with 2 Horizontal drills in the Y Direction Grooving Saw X Direction Plausibility Check 5Kw Tool Change Spindle Todpfx Aj Acw Hnsbajd 4 Position Tool Changer Energy Saving Mode 400V 50Hz CE Marked

Condition: used, machine/vehicle number: 008493, Introduction system: with grippers Tsdpfx Ajz S T Uusbaod

Condition: used, functionality: fully functional, Year of construction: 1991, Used 2.5-meter plate shear from Safan Type: VS 255 6 Capacity: 2550 x 6 mm Tedpfx Abo Aazw Ssaed Electric NC back gauge Back gauge length: 1000 mm Year of manufacture: 1991

Condition: new, functionality: fully functional, overall weight: 260 kg, volume flow: 65.3 m³/h, power: 22 kW (29.91 HP), GRUNDFOS NKE 40-250/255 stainless steel centrifugal pump – 22 kW – integrated VFD – new/unused New, unused Grundfos industrial centrifugal pump with integrated variable frequency drive. Complete assembly with motor, coupling, coupling guard and steel baseplate. Stainless steel pump casing and impeller, suitable for water transfer and various industrial pumping applications. Technical specifications: Type: NKE 40-250/255 A2F2KE-SBQQE Product number: 97701889 Motor: Grundfos MGE, 22 kW Supply: three-phase 380–480 V, 50/60 Hz Nameplate duty point: 65.3 m³/h at 78 m head Speed at stated duty point: 2,940 rpm Nameplate pressure/temperature rating: 16 bar / 120 °C Stainless steel casing and impeller: EN 1.4408 Shaft seal: BQQE Motor efficiency: IE3, 92.7% Protection rating: IP55; insulation class F Control interface: PUMP I/O, GENI/RS485 Condition: new/unused surplus stock. Supplied as pictured. Tedpfx Ao Aaw Rhebasd

Condition: refurbished (used), Year of construction: 2014, machine/vehicle number: R-00680, load capacity: 235 kg, arm reach: 2,550 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB IRB 6640-235/2.55 manufactured in 2014.09. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6640-235/2.55 Model Number: IRB-6640 Year of Manufacture Robot: 2014.09 Warranty term (months): 12   Payload (kg): 235 Reach (mm): 2550 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1310   Controller: IRC5 Year of Manufacture Cabinet: 2014.09 RCC Length (m): 14   Todpfs Aaxdpjx Abasd Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 8,530 h, load capacity: 5,500 kg, lifting height: 4,050 mm, fuel type: diesel, mast type: simplex, construction height: 2,800 mm, fork carriage width: 1,900 mm, fork length: 2,300 mm, empty load weight: 8,030 kg, total length: 3,400 mm, drive type: Diesel, construction width: 1,950 mm, Diesel forklift Load center: 600 Fork width: 150 mm Fork thickness: 60 mm Mast type: Standard Todpfx Abez Ewdfsasd Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 8.25-15 Rear tire type: Superelastic Rear tire size: 7.00-12 Description: In addition to this Mitsubishi model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options are available at favorable terms. We would also be happy to purchase your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this FD55NT. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons and up. We would also be happy to offer your vehicle for sale on consignment. Side shifter, fork positioner Fork positioner opening range: 550 / 1810 mm Heater, full cab, air conditioning

Condition: used, Pallet racking system by Voest, approx. 55 linear meters, used 🧰 Product features • Manufacturer: Voest • Color: green • Condition: used, see photos • Frames: 13 pcs., pre-assembled, 400 x 110 cm • Beams: 48 pcs., with a clear span of 426 cm, profile 150 x 50 mm • Safety: 96 pcs., galvanized safety pins • Fasteners: 52 pcs., Hilti concrete anchors • Load capacity: 1,600 kg per level • Field load: 8,000 kg • Load capacity label: included Over 1,000 linear meters in stock Frame heights up to 10 meters Available depths: 75 cm and 110 cm Available beam lengths: 426 cm and 566 cm Matching depth beams, insert gratings and insert shelves available upon request 💰 Price €2,250 net, excluding VAT • Quantity discounts: upon request • Shipping costs: Europe-wide, upon request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P10433 Constantly over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & heavy-duty racking systems, used & new Description: Are you looking for high-quality storage racking systems to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: Tjdpezg U Adofx Abaed • Over 10,000 linear meters of racking systems immediately available • 20,000 m² of mezzanine floors & steel platform structures immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racks (Elvedi cantilever racks, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including thorough clearance. 2. Commission auction: Conducting auctions on commission. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling and thorough handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: like new (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, operating pressure: 160 bar, total length: 1,310 mm, high-pressure hose length: 50,000 mm, total height: 1,030 mm, total width: 1,020 mm, type of input current: DC, empty load weight: 320 kg, input voltage: 12 V, fuel: regular/benzine 91, overall weight: 320 kg, water tank capacity: 500 l, power: 17.7 kW (24.07 HP), volume flow: 3.3 m³/h, pressure (max.): 160 bar, We are offering this like-new Dirojet Whale Built-In Plus 55/160 high-pressure cleaner, manufactured in 2024. Dimensions (L × W × H): 1310 × 1020 × 1030 mm Gross weight: 320.000 kg Net weight: 320.000 kg Serial number: 23-260 Year of manufacture: 2024 Water flow rate: 55 l/min Maximum operating pressure: 160 bar Engine power: 17.7 kW Engine power: 24 HP Engine type: Gasoline engine (Honda GX690) Voltage of the high-pressure hose reel: 12 V DC High-pressure hose length: 50 m High-pressure hose diameter: 1/2" Fill hose length: 35 m Todpfx Ajzg Adisbajd Fill hose diameter: 3/4" Water tank volume: 500 l Country of manufacture: Italy If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Conveyor belt: Angled conveyor belt with protective cover -Speed: 4.2 m/min -Conveyor belt width: 80 mm -Conveyor belt length: 1355 mm / 340 mm -Motor: Groschopp 0.065 kW -Dimensions: 1780/500/H340 mm -Weight: 63 kg Tjdpfx Aboz D Swqeaod

Condition: used, machine/vehicle number: 008494, Position 1: Single Edgebanders HOLZHER-LUMINA + MASTER 5510 Tjdpfszbxznsx Abajd Position 2: Panel Return Systems HOLZHER-LUMINA + MASTER 5510

Condition: used, Year of construction: 2007, functionality: unexamined, machine/vehicle number: 44.772, Item description Diameter x inlet length (BL): approx. ⌀ 1930 x 3600 mm Loading length: approx. 3600 mm Loading diameter: approx. 1800 mm Operating pressure: 14 bar Operating temperature: 150 °C Todpfxj Af Ikxe Abaed Transport trolley, dimensions: approx. 1780 x 1200 mm Approximately 20 shopping carts are still available. Volume: 14,100 l PS: 14.5 bar, PT: 21.5 bar 400 V Operating hours of the fan: 15,531 h Cooling system: LAND, year of manufacture 2007 Weight: 5600 kg

Condition: good (used), spindle bore: 310 mm, travel distance X-axis: 798 mm, travel distance Z-axis: 358 mm, spindle motor power: 45,000 W, rotational speed (max.): 500 rpm, total height: 2,100 mm, total length: 8,100 mm, total width: 2,750 mm, overall weight: 13,000 kg, Chip conveyor  SMW Front and Rear chuck 700 mm  Double revolver 6+8 positions Big Bore 360 mm Tjdewxb Erepfx Abajd Tailstock with power quill Tooling package included with inserts and jaws Max. turning Ø:665mm X-Axis: 798mm Z-Axis: 358mm Spindle bore: 360mm Speedrange: 500Rpm Spindle power: 45kW Pinole taper: 6Mk Stroke pinole: 230mm Quill Ø: 150mm Length: 8100mm Width: 275mm Height: 2100mm Weight: 13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!