Used Floorpul Ruby 45 for sale (9,350)

Condition: good (used), Year of construction: 2002, operating hours: 46,928 h, functionality: fully functional, total width: 1,400 mm, total length: 1,500 mm, total height: 1,400 mm, type of input current: AC, overall weight: 1,800 kg, input voltage: 400 V, Technical specifications of the JCP 45 in detail Rjdo Agvb Uopfx Abajch Parameter Specification / Value Rated power 45 kW Maximum pressure 4,000 bar (constant working pressure) Flow rate 4.7 l/min (up to 5 l/min at reduced pressure) Pressure ratio 1:13 to 1:16 (oil to water pressure) Maximum oil pressure 300 bar Pressure stages 2 pressure stages / continuously adjustable Electrical connection 3x 400V / 230V, 50Hz Required air pressure min. 6 bar (maximum 7 bar for control) Cooling system Oil-water cooling or alternatively oil-air cooling Noise level approx. 78 dB Dimensions (W x H x D) 1,500 x 1,400 x 1,400 mm Weight 1,800 kg

Condition: ready for operation (used), For sale: original Hanomag R35/45. Please submit your offer! Drives well, has no oil leaks, MOT is expired but can be renewed at additional cost. Price negotiable. The vehicle was always stored indoors. Now available for sale. Year of manufacture: 1956, with rare features and a functional Roots blower increasing output to approx. 45 hp. This machine is a technical one-off and is in very good, working condition. Equipment & details: • Type: R35/45 A (agricultural tractor version) • Engine: 4-cylinder diesel engine with mechanically driven Roots blower. Many original stickers and type plates on the machine. Output: approx. 45 hp • Transmission: 5 forward gears + 1 reverse, plus additional reduction (total 10 gears) • Year: 1956 • Rare: Front auxiliary PTO/extra PTO shaft via separate lever • Runs, steers and brakes flawlessly, starts reliably Condition: • Very good overall technical condition • Original appearance with lovely patina • Complete dashboard, inscriptions, lighting, etc. No improvised repairs – all mechanically robust • Ideal as a collector’s item, for vintage meetings or for enthusiasts. Rarity & value: • The Roots blower was only installed in a few models or by Hanomag authorized workshops for power increase. • Such authentic vehicles with working blower and special equipment are extremely rare. Subject to errors. Pictures/description may vary. Rsdpfx Aswvf E Dsbajch

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 15-11-12-098, functionality: fully functional, power: 5.5 kW (7.48 HP), saw blade diameter: 500 mm, Excellent condition Machine available from January 2027 - Equipment package "B" - Saw blade, D = 500 mm - Motor power 5.5 kW (7.5 hp) Vario - 2-axis scoring unit - Double roller carriage, L = 3200 mm - On/off switch on the double roller carriage - Miter stop on the cross table up to 3200 mm with Digit-L - CNC parallel stop, 1300 mm - Control panel at eye level - Template holder - Table extension, 840 mm Rsdpfx Ao Af Ub Uobaoch

Condition: like new (used), functionality: fully functional, power: 340 kW (462.27 HP), first registration: 11/2025, fuel type: diesel, tire size: 385/55-315/70-385 /55r22.5, color: white, driver cabin: other, gearing type: semi-automatic, number of gears: 12, emission class: euro6, suspension: parabolic leaf (spring), total length: 11,800 mm, total width: 25,500 mm, total height: 31,000 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 8,000 kg, Year of construction: 2024, Equipment: ABS, AdBlue, Bluetooth, additional headlights, air conditioning, airbag, electric window regulation, fog lights, full service history, onboard computer, parking air conditioner, power mirror, retarder, tachograph, tire pressure monitoring, trailer coupling, ALL TECHNICAL DETAILS CAN BE FOUND IN DETAILED FORM IN THE ATTACHMENT Rcsdoy H Ht Djpfx Abash

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: SEICOS Σ10M / A10M, table load: 750 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: approx. 760 mm Y-axis travel: approx. 500 mm Z-axis travel: approx. 500 mm Table length: approx. 1,120 mm Table width: approx. 485 mm Table load capacity: max. approx. 750 kg Spindle speed: typically up to 8,000 rpm Rcodpe Afwvlofx Abash Tool holder: SK40 Number of tool positions: 30 MACHINE DETAILS Control system: SEICOS Σ10M / A10M Machine weight: approx. 6,500 kg

Condition: new, functionality: fully functional, Offered for sale is a semi-moist pet treat production equipment set based on a twin-screw extruder, designed for continuous forming, portioning, and cooling of semi-moist products. The line has been dismantled and is ready for shipment. It was purchased from a supplier and not used in production, but the configuration is equivalent to machinery currently operating in active plants for semi-moist pet treat manufacturing. This system addresses the key process steps that define semi-moist product quality and handling: stable solids dosing into the extruder, controlled shaping and cutting, as well as staged cooling to stabilize texture and reduce sticking or deformation before packaging or further processing. The extruder is of twin-screw design and has achieved production capacities of up to 150 kg/h, depending on recipe and configuration. Product shaping is highly flexible and can be adapted to a variety of product formats; it is suitable for dental sticks, hearts, bones, sticks, strips, and other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal or grain-free semi-moist treats as well as vegetarian-type items; final product characteristics depend on recipe, moisture targets, and process parameters. Dry base components are supplied using a volumetric or mass-based dosing feeder, feeding directly into the extruder. This enables steady extrusion and consistent shaping. Downstream portioning is performed with a rotary knife cutter fitted with specialized inserts for clean cutting of semi-moist products. Cut length can start from approx. 5 mm and can be adjusted as required; achievable range depends on settings and the cutter head. The cutter head concept is flexible and can be adapted or redesigned depending on desired final product and surface finish for different shapes and recipes. After forming and cutting, product is conveyed through an initial cooling section with a fan, followed by a conveyor cooler for further stabilization. Cooling is based on ambient forced air, with cooling performance managed by conveyor speed (residence time) and airflow. This two-stage cooling process is optimal for semi-moist products, helping to prevent clumping, deformation, or marking during handling and transport. A notable feature of this line is the mixing head at the extruder outlet, which supports improved mixing and temperature control and enables production of two-color treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—stainless steel pumps and tanks for water, fats/oils, glycerol, and other typical process fluids. All liquid handling components are stainless steel, meeting hygienic production standards. Rcodpjycfw Ejfx Abaeh

Condition: excellent (used), Year of construction: 1974, Catalog number: 7685 TECHNICAL DATA - inlet width: 440mm - inlet height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen dimensions: 50x50mm - toothed drive shaft, top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (with adjustable speed) - with conveyor belt - length of feed belt: 4006mm - width of feed belt: 380mm - belt feed direction: forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight: approximately 2000kg ADVANTAGES - German-made - with conveyor belt - auto-reverse - used shredder, very good condition Rodpfx Ao Aggbqsbasch Net price: 76,900 PLN Net price: 17,880 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: used, machine/vehicle number: 008342, Max. panel width: 70 mm Max. panel length: 2100 mm No of injectors: 4 Lateral horizontal groups: yes Rcjdpfox A Tc Uex Abash

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 5-axis machine with a table length of 4,469 mm in the X-axis and 1,560 mm in the Y-axis, including 2 tool changers. Working dimensions: X-axis: 4,469 mm Y-axis: 1,560 mm Z-axis clearance: 180 mm Work table: 8 workpiece supports 8 rear workpiece stops, programmable, installed in each support 8 middle workpiece stops, programmable, installed in each support, positioned approximately 520 mm from the rear 1 + 1 lateral workpiece stops Lifting rails, pneumatic, programmable, for positioning heavy workpieces Vacuum pump 250 cbm/h Redpfx Abo Agu Aksaoch Equipment for machining head: Drilling head with: 18 vertical drilling spindles, each individually controllable 2+2 horizontal drilling spindles in the X-direction 2+2 horizontal drilling spindles in the Y-direction Fixed nut saw in the X-direction 5-axis milling spindle 11 kW, HSK 63 F Rotational speed 1,000 - 24,000 rpm Bidirectional rotation Saw blade diameter, max. 300 mm Tool magazine, 12 positions, mounted on the machining support, moving in the X-direction Tool magazines, 10 positions, mounted laterally on the machine table on the left side Safety devices: * Support equipped with a bumper system * Protective fence on the side, rear, and left with an access door Control system: XILOG MAESTRO Without tools and aggregates Additional equipment: * Handheld terminal for controlling basic functions, such as manual movement, feed rate, and milling spindle speed

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Fitotron® modular plant growth chambers, Type HGC 1014 V, incl. HQI-T and Krypton lighting module Temperature range +5°C to +45°C for temperature testing Test chamber volume approx. 1300 L Simpac control system Network connection USB port The Fitotron® HGC series plant growth chambers feature a modular design. Individual modules can be added or exchanged as needed, allowing the units to be adapted for various applications. They are suitable for plants with high light requirements, such as wheat, maize, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: +5°C to +45°C Temporal temperature fluctuation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity fluctuation: ± 3% to 5% RH Fresh air supply: up to 7.5 m³/h Power consumption (without fresh air operation at 25°C / 75% RH): approx. 0.8 kW Specifications for climatic testing with irradiation Temperature range: +10°C to +45°C (with lights on) Temporal temperature fluctuation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity fluctuation: ± 3% to 5% RH Humidification and dehumidification system; stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single-door unit with observation window Interface for computer connection Power supply: 3/N/PE 400V ±10% 50Hz CE marked, mobile, very good condition Cable/pipe port: Ø 50 mm Air cooling Refrigerant: R404A Weight: approx. 480 kg + 130 kg (lighting module) Rcjdpfxjzpv Iaj Abajh Four units of this model are available for sale. Please feel free to contact us if you have any further questions.

Condition: like new (used), Year of construction: 2019, operating hours: 137 h, T45 thicknesser from Martin with Tersa cutterhead Planing width approx. 630mm Planing height electrically adjustable from 2.8 to 300mm, reading via digital display with 1/10mm accuracy and positioning control The control unit also offers the option of incremental adjustment, i.e., you can, for example, enter 1mm and then repeatedly press the start button to change the planing height by 1mm each time, without having to set a new absolute height each time. Furthermore, 99 fixed values can be stored as a program. Drive motor 5.5kW with automatic motor brake 4-knife Tersa cutterhead with new knives Feed rate 6 + 12m/min Rubber-coated feed roller Rubber-coated outfeed roller Planed machine table guided on four leadscrews and guides for optimum stability Low-noise design with soundproof hood Dust extraction port 160mm Emergency stop at the front and rear New Tersa knives Operating manual CE marking Original paint, not repainted Carpet in original condition No scratches on the table!! Only 137 operating hours, i.e., only 25 minutes per week!!! Dimensions approx. 1200 x 1300 x 1250mm (LxWxH). Weight approx. 1200kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in stock in our warehouse, see "other offers from this supplier". Rjdpfx Ajz Icvljbaoch

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, operating hours: 3,332 h, machine/vehicle number: 16348, load capacity: 227 kg, lifting height: 15,940 mm, overall weight: 7,620 kg, empty load weight: 7,620 kg, transport length: 6,850 mm, transport width: 1,800 mm, transport height: 2,000 mm, next inspection (TÜV): 12/2026, fuel type: electric, tire condition: 100 %, drive condition: 100 %, color: red, We are offering for sale a boom lift from our fleet, with a working height of 16 meters, which has been regularly maintained. Thanks to the continuous and regular maintenance, the machine is in excellent technical condition. Rcjdozp Hl Nepfx Abaoh The purchase price includes recently prepared inspection reports issued in the customer's name, and we also provide detailed information on the condition of the batteries. You can find the complete and detailed specifications of the machine on our website.

Year of construction: 1994, condition: good (used), Manufacturer: Boge Type: V LEX 45 Rodehtq Dvepfx Abaech Engine: 45 kW Capacity: 6.5 m³/min

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, operating hours: 8,168 h, machine/vehicle number: Z4525-014046, load capacity: 227 kg, lifting height: 16,000 mm, overall weight: 6,280 kg, empty load weight: 6,280 kg, transport length: 5,380 mm, transport width: 2,130 mm, transport height: 2,000 mm, next inspection (TÜV): 01/2027, fuel type: diesel, fuel tank capacity: 64 l, tire size: 355/55 D20, tire condition: 100 %, drive condition: 100 %, wheelbase: 203 mm, ground clearance: 229 mm, color: blue, We are offering for sale a boom lift from our fleet, with a working height of 16 meters, which has been regularly maintained. Thanks to the continuous and regular maintenance, the machine is in excellent technical condition. The purchase price includes recently prepared inspection reports issued in the customer's name, and we also provide detailed information on the condition of the batteries. Rcjdpfx Ae Aa Aqmsbajh You can find the complete and detailed specifications of the machine on our website.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1 h, load capacity: 45 kg, arm reach: 2,050 mm, number of axes: 6, This 6-axis ABB IRB 4600-45/2.05 robot arm was manufactured in 2020. It features a load capacity of 45 kg and a reach of 2.05 m, making it suitable for various automation tasks. The robot is equipped with a Single Cabinet Controller (IRC5) and includes advanced safety features. If you are looking to get high-quality automation capabilities, consider the ABB IRB 4600-45/2.05 robot arm we have for sale. Contact us for further details. Rcodps Agwzkjfx Abaeh - Payload: 45 kg- Reach: 2.05 m- Number of Axes: 6- Protection Rating: Standard- Color: ABB Graphite White std (209-202)- Manipulator Net Weight: 425 kg- Controller Net Weight: 150 kg- Operating Voltage: 3x 400 V AC, 50-60 Hz- Rated Current: 13 A- Short-Circuit Rating: 10 kA- Main Connection: Connector HAN HSB 6p+E (752-2)- Main Switch: Rotary switch (742-1)- Service Socket: 230 V (736-1)- Operating Ambient Temperature: Up to max. 45 °C (708-1)- Manipulator Cable Length: 7 m (210-2)- Teach Pendant: FlexPendant with 10 m connection cable (701-1)- Operating System / Firmware: RobotWare 6 (Boot Application 6.10.02.00) Software Options Installed: * 888-2 ProfiNet I/O Master/Slave Software * 996-1 Safety Module * 997-1 PROFIsafe F-Device * 1125-2 SafeMove Pro * 608-1 World Zones * 611-1 Path Recovery * 616-1 PC Interface * 617-1 FlexPendant Interface * 623-1 Multitasking * 689-1 External Guided Motion * 824-1 MultiFunction * 641-1 RobotWare Dispense- Interfaces & I/O Modules: * 803-2 User interface (parallel, EtherNet, and air) * 431-1 Mating connector for customer signal interface * 239-1 Mating connector kit at robot base * 970-1 RS232 serial interface * 1541-1 Digital I/O base module (16 In / 16 Out) * 731-1 Internal safety signals- Included Base Plates & Mounting Sets: * Base plate Type A (IRB2600/4600) height H=60 mm * Robot mounting kit for IRB4600 * Fastening kit GP Type C + SO Type C+G- Calibration Offset Data (Axis Resolver Values): * Axis 1: 3.9506 * Axis 2: 5.4462 * Axis 3: 5.6400 * Axis 4: 0.5636 * Axis 5: 1.2936 * Axis 6: 2.8601

Condition: excellent (used), Year of construction: 2010, Panhans PF45 swivel spindle milling machine in good, fully functional condition. Rcsdpez Dp Erofx Abaeh The machine has been used very rarely and has hardly any operating hours. Therefore, it is slightly dusty. Year of manufacture: 2010 Swivel range: -5° to +45° Spindle diameter: 30 mm Vertical adjustment: 170 mm Speeds: 3000 / 4000 / 6000 / 8000 / 10000 rpm Motor power: 5.5 kW Table size: 1,300 x 850 mm Weight: approx. 530 kg Right and left rotation of the milling spindle Optionally, a suitable dust extraction system from Höcker Polytechnik / Nestro can also be purchased (see last picture). The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial users with exclusion of liability for material defects. No guarantee, warranty or right of return.

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 3GBG252051-ADK,002,009, The machine is a wood gasifier that converts the gas from wood chips into electricity that is generated from a 6-cylinder GM engine. The machine was acquired as part of the property that includes a boutique hotel. It was subsequently shut down when we did not have the capacity to operate it and the hotel. We expected to once again redeploy it but the base business keeps us too busy to add the operation and maintenance required of the machine. Rcodpfx Ae Adl Hrsbajh

Condition: good (used), Year of construction: 1989, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, input current: 6 A, pressing force: 30 t, compressed air connection: 6 bar, input frequency: 50 Hz, Equipment: compressor, documentation/manual, safety light barrier, We are offering this well-maintained Baier Geba 45/B foil printing machine, manufactured in 1989, for sale. Rcjdpfx Aoz R Ru Rjbash Type: Geba 45/B Serial number: 89075 Nominal voltage: 380 3/N/PE ~ V Frequency: 50 Hz Current: 6 A Max. pressure: 6 bar Heating: 480 W Printing force: 30 kN Max. strokes per hour: 9900/h Wiring diagram no.: 541300 16 3 If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1993, machine/vehicle number: 93-11-247, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, rotational speed (max.): 4,000 rpm, Fully functional machine from a plastics/wood processing company. In good condition. Machine is available from calendar week 50/2026. Rsdpfsz Ngt Sex Abaech

Condition: excellent (used), Year of construction: 2021, operating hours: 2,600 h, ABB IRB4600-45/2.05 robot and IRC5 controller-TPU-RW6.X DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, serving a large area for robot maintenance and repair. Over the years, we have developed into a comprehensive partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Rjdoz Tab Depfx Abajch

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, CNC turning center Okuma LU 45 M -3000 Control: OSP-P200L Year of manufacture: 2009 Internal machine number: 81 Rcjdpfxoz Rl H He Abajh Max. turning diameter: 660 mm Max. turning length: 3,000 mm Spindle bore: Ø 260 mm Spindle speed: 2,800 rpm Travel distances: X-axis: 420 mm Z-axis: 3,025 mm Spindle power: 30 kW Accessories - Chip conveyor - Tool turret with 12 stations - Tools

Condition: excellent (used), Year of construction: 2021, HT45-G3-SM2Y/FANUC WITH POWERED TOOLS AND Y-AXIS CNC turning machine for complete machining of turning-milling parts with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, integrated spindle motors on main and counter spindle (water- cooled), pre-tensioned roller guides. Drive power: Main spindle - 15 kW Counter spindle - 15 kW Speed range: Main spindle 0 – 7000 min-1 Counter spindle 0 – 7000 min-1 Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar diameter ø 45 mm) Counter spindle: KK5 Y-axis: • Travel range: +40/-40 mm • Rapid traverse speed: 15 m/min Includes: • Draw tube on the main spindle • Pull rod for the main/counter spindle • Mechanical spindle brake (main/counter spindle) • Part ejector and flushing through the counter spindle • Fanuc 31i-B control - EMCONNECT/APP based user interface - Manual Guide i dialog programming - 22" Multi-Touch Display - USB interface - Network drive / Ethernet - 3D Simulation - LED status bar, and more • 2x 12-position tool turret VDI 25 radial with direction logic for up to 2x12 powered tool stations (HSC turret)! Swivel speed adjustable with feed switch! Performance data: - Max. speed: 8000 rpm - Max. continuous speed: 6000 rpm - Max. drive power: 4 kW - Max. torque: 16 Nm - C-axis for main and counter spindle - TRANSMIT software for easy C-axis programming • Chip conveyor with a discharge height of 1100 mm, programmable (Type "hinge belt") • Coolant system integrated in the chip conveyor 2 high-pressure pumps with 14 bar 2 flushing pumps with 3.7 bar • Air gun with spiral hose • LED machine room light • Hydraulic unit • Vibration-damping leveling feet Rcodpfx Aboz Rzh Heash • Mounting angle and high-performance anchors • Documentation / CE certificate Year of construction: 2021 Machine no. S3K212051 Includes: various accessories

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20212531, The HiTec Steam Cooker, are versatile, custom-built cookers are designed to Steamcook & pasteurize, a wide range of production needs such as gyoza, dumplins etc. Engineered with food safety,EHEDGE, efficiency, and footprint in mind. Year of construction 2021 and not used much since that! Rcodpexl Tnpsfx Abaeh

Year of construction: 2020, condition: good (used), Used 6-meter straightedge from Pehu Top quality, new price approximately €20,000. Net measuring length: 6000 mm Also suitable for printing applications. Year of manufacture: 2020 Rodpfxszgua Nj Abaech

Condition: good (used), Year of construction: 2017, Code: 0498 Brand: ALTENDORF Model: START 45 - CE Standard Panel saw with tilting blade and scoring unit for precision cutting of panels, joinery, furniture, bespoke fittings, kitchens, doors, window and door frames, plastics, aluminium and various other materials – CE Standard – Year 2017 Technical data: Aluminium carriage length 3200 mm Max blade diameter mm 315 Hole 30 Max cutting height mm 100 Rcsdpfx Abjz S Ik Reash Manual blade lifting and tilting Scoring unit diameter mm 120 Hole 20 Parallel guide width mm 1300 Blade guard Guide for mitre cuts Worktable height mm 885 Suction inlet diameter mm 100 Overall dimensions of assembled machine mm 3400 x 3350 x 1050 h Overall dimensions for transport mm 3400 x 2000 x 1050 h Weight kg 750