Used Ibarmia A 50 for sale (17)

Condition: used, Column Drilling Machine Make: IBARMIA Model: A-35 Year of manufacture: 1980 – workshop-tested Machine No.: 1294-C Speed: See technical data Accessories: - Automatic feed for drilling - Machine lamp - Machined coolant base plate - Coolant system - Operating manual Technical Data: 9 spindle speeds via gear stages 73/103/149/232/325/472/695/976 and 1415 rpm Right/left rotation 4 automatic drilling feeds: 0.1/0.2/0.4 and 0.4 mm Drilling capacity in steel (ST 60): 35 mm Isdpfx Afow Hxbmsaoan Drilling capacity in cast iron (GG 20): 45 mm Thread cutting capacity in steel (ST 60): M 27 Thread cutting capacity in cast iron (GG 20): M 33 Spindle taper MK 4 Spindle stroke: 200 mm Table dimensions: 510 x 510 mm (T-slot: 16 mm) Rotatable table plate Weight approx. 490 kg Used, sold without warranty.

Condition: used, Drill press, bench drill, column drill, pillar drill -Manufacturer: Ibarmia, column drilling machine type 40 TF / C -Motor: Siemens 1.1 kW -Speeds: 104 - 1450 rpm, right-left rotation -Table size: 360 x 300 mm, travel 600 mm Iodpfxohaxkns Afaean -Spindle mount: MK3 -Spindle stroke: 150 mm -Feed: automatic -Projection: 300 mm -Pillar Ø: 125 mm -Coolant device -Dimensions: 480/680 / H2220 mm -Weight: 358 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Ibarmia AZ-34 Pillar Drilling Machine (2008) Manufacturer: Ibarmia Model: AZ-34 Pillar Drilling Machine Year of manufacture: 2008 Condition: Used, very good, newly serviced Drilling capacity in steel: 34 mm Thread cutting capacity in steel ST 60: M 27 Speed range: 100-2000 rpm Speed control: Potentiometer Speed display: Digital Tool holder: MT 4 Quill stroke: 150 mm Column diameter: 125 mm Feed: 0.1 / 0.2 / 0.3 mm/rev Type of feed: Mechanical Arm length: 300 mm Table size: 400 x 480 mm Drive power: 2.2 kW Electrical connection: 400/50 V/Hz Weight: 360 kg Infinitely variable speed control with digital readout Electronically adjustable from 100 – 2,000 rpm Machine lamp Coolant system integrated in the machine base Machined baseplate with 2 T-slots Integrated tool ejector Chip guard with microswitch Automatic reverse rotation for thread cutting Iaodpfsx Ivzysx Afajn 3 automatic drilling feeds Operating manual included Dimensions/Weight: 2350 x 610 x 1100 mm (LxWxH)

Condition: good (used), Year of construction: 1992, machine/vehicle number: 145 K, Offer 24018 Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drill spindle holder MK 3 - Drill spindle stroke 150 mm - 9 drill spindle speeds 104 - 1400 rpm - 2 feeds 0.1 / 0.2 mm/rev - throat depth 290 mm - max distance table - drill spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - right - left rotation Iaodpfxeu At Ths Afasn - Coolant device - Quick-action drill chuck 1-13 - lighting

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 25.0 / 30.0 mm Iajdpfx Aexaamzefaon throat 150 mm bore stroke 120 mm threading M18 / M22 spindle taper 3 MK table: 300 x 270 mm turning speeds 200 - 4.000 U/min column diameter 100 mm total power requirement 0.75 / 1.1 kW weight 170 kg range L-W-H 800 x 500 x 1400 mm from a training workshop (!!) New price approx. 4.700 euros Furnishing: - robust bench drill with V-belt drive - Clamp / relax using a quick release lever - stepless speed adjustment - digital speed display - EMERGENCY OFF push button at the front - stable feed handle - stable quill for tool mounting - Thread cutting device - Right / left running of the work spindle - Pole changing motor - manual spindle feed - Height-adjustable work table, using a hand crank - adjustable drilling depth stop

Condition: used, Year of construction: 1998, Technical details: x-travel: 3000 mm y-travel: 600 mm z-travel: 800 mm table surface area: 3.600 x 650 mm max. table load: 2.800 kg control: TNC 426 HEIDENHAIN turning speeds: 6.000 1/min tool change unit: 30 Pos. taper ISO: SK 50 rapid motion - x-axis: 30 m/min rapid motion - y-axis: 30 m/min rapid traverse Z-axis: 30 m/min spindle drive: 31 / 21,5 kW total power requirement: 45 kW dimensions of the machine ca.: 5,5 x 3,4 x 3 m weight of the machine ca.: 15,5 t Iaedpfxsychidj Afaen 3-axis vertical machining-center, prepared for 4th axis (wire and plug), internal cooling device 40 bar, chip conveyor, el. handwheel HR 410, 3D-touch probe, direct measuring system, dividing wall, twin table machining, flush gun, table elevation 100mm, bed flushing, coolant of spindle (oil), approx. 53.000 switch on hours, 18.500 spindle hours *

Condition: used, Brand: Ibarmia-1B-35 Description: Dividing head bell, 2 stations Iaedexqmvkopfx Afaon

Condition: used, Year of construction: 1999, functionality: unexamined, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, table width: 850 mm, table length: 2,000 mm, rotational speed (max.): 6,000 rpm, Machining Centre Ibarmia ZV55/L1600 Travels: X: 1,600 mm Y: 800 mm Z: 800 mm Milling Spindle: Spindle: SK50 Power: 28/35 kW Spindle Speed: 6,000 rpm Tool Changer: 30 positions, chain magazine Control: Heidenhain TNC426 Handwheel Documentation and export possible at an additional cost. Iaodpfjx Ndc Ujx Afasn Inspection under power is possible. We will gladly send you further details or arrange an on-site demonstration.

Condition: used, Year of construction: 2003, x-travel 3000 mm y-travel 800 mm z-travel 800 mm weight of the machine ca. 16000 kg Iaodpfx Aexzk Rajfaen

Condition: good (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, Machine in good technical condition, possibility of testing upon agreement. Machine parameters: W x D x H = 5850 x 4860 x 3100mm. Weight 14500kg. X-axis travel 1600 mm Y-axis travel 800 mm Z-axis travel 900 mm Rotation angle +/-105° Fanuc control system. Iedpfx Afox R Dnmsaoan Maximum speed 12000 rpm Number of tools in magazine: 24 Worktable dimensions: 2000 x 850 mm. It is designed for customers who require a vertical spindle, but also high speeds and is the perfect solution with all the advantages it provides: - High speed range and high torque - High position dynamics and high acceleration in the axes - Limited working space: maximum comfort and safety - Vertical protection up to the roof in the X axis: optimizes chip and coolant drainage - The upper cover of the working space with a roof allows access by a bridge crane - Tool change and tool change arm in the working area. The machine is equipped with a wall dividing the table into two parts, so that it is possible to machine separately in one part and clamp in the other. Machine in good technical condition, after agreement possibility of testing. Machine parameters: Width x length x height = 5850 x 4860 x 3100mm. Weight 14500kg. X 1600mm Y 800 mm From 900 mm Swivel angle +/-105° Fanuc control system. Maximum speed 12000 rpm E2n3n2y Number of tools in the magazine: 24 Work table dimensions: 2000 x 850 mm. Designed for customers requiring a vertical spindle but also high speed, it is the perfect solution with all the advantages it provides: - High speed range and high torque. - High position dynamics and high acceleration in the axes - Enclosed working area: maximum comfort and safety - Vertical protection up to the roof in the X-axis: optimizes chip and coolant evacuation - Top cover of the working area with roof allows access by overhead crane - Tool change and tool change arm in the work area. The machine accessories include a wall dividing the table into two parts, so it is possible to machine separately in one part and clamp in the other.

Condition: good (used), Drill with coordinate table and sliding head Brand: IBARMIA Model: B70P Capacity: Up to 70mm drill Characteristic: - Transmission: By gears. - Coordinate table with 2 X-Y axes. - Automatic advance. - Number of automatic advances: 6 - Number of speeds: 24 - Chap. max. drilling capacity in 70Kg steel: 70mm - Chap. max. drilling capacity in 200Hb cast iron: 80mm - Electromagnetic clutch - Automatic tool ejector - Motorized moving head - Bidirectional rotation. Iaodpfx Aoh Rydnsfaen - Head travel: 1500mm - ANILAM digital X,Y coordinate display. - Table tours: X570 x 260mm - Table dimensions: 500x1000mm - Manual oiler Cooling system using coolant. It is delivered revised and with the protections for CE compliance.

Condition: like new (used), Year of construction: 2002, Parts shown by hand not come Iedpfx Afjk It Utjajan

Condition: used, Year of construction: 1989, Drilling / Milling Machine IBARMIA B 32 F Iaedpfx Afexu H Sysaen Travel X: 675 mm Travel Y: 350 mm Travel Z: 600 mm Cone SA 30 Spindle exit: 200 mm Rotation: from 75 to 2375 RPM Table size: 1200 x 360 mm Year of construction: 1989 Maxi distance spindle nose/table: 700 mm Throat depth: 380 mm Swivel head at +/- 45° Table: X - Y manuel movements Motor: 2-speed motor Scale ACU-RITE Auto descent Drilling / Tapping function Watering Voltage: 380 V Width: 1600 mm Depth: 1600 mm Total height: 2500 mm Weight: approx 2 T

Condition: good (used), spindle speed (max.): 9,600 rpm, spindle speed (min.): 200 rpm, – MK3 – 200–9600 rpm Iedpfx Afsxq Rwfjajan – Right- and left-hand rotation – Thread cutting function – Throat depth 120 mm – Steplessly adjustable speed – Thread cutting function – Protective cover – Emergency stop switch – 40V

Condition: excellent (used), Year of construction: 2002, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The used IBARMIA ZV 35 L1600 vertical machining center with moving column is a medium/large sized numerically controlled vertical center with HEIDENHAIN 430 CNC, 1600 x 500 x 500 mm strokes, ISO-40 spindle (DIN 69871) 10,000 rpm, 40-position random tool changer, through-spindle coolant, carpet chip evacuator, optical scales, remote handwheel and bulkhead for pendulum machining. Iaedpfxswqxnbo Afaon year of construction 2002, CE compliant, in excellent general condition.

Condition: good (used), power: 0.018 kW (0.02 HP), travel distance X-axis: 2,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, overall weight: 15,000 kg, table length: 2,600 mm, table width: 850 mm, spindle speed (max.): 8,000 rpm, Equipment: chip conveyor, CHARACTERISTICS Table; 2600 x 850 mm X-axis travel; 2200 mm Y-axis travel; 800 mm Z-axis travel; 800 mm Spindle RPM; 8,000 Control; Fagor 8055 - MC Iaodpfor I Aumex Afajn Motor power; 15/18,5 Kw Magazine tool capacity; 40 Tool; BT 40 Fourth spindle (IRTS splitter); 350 ⌀ mm Electronic handwheel Cooling through the tool Chip extractor Air cooling Dimensions with extractor (width x length x height); 4029 x 7050 x 3100 Weight; 15,000 kg

Year of construction: 1997, condition: good (used), Ibarmia CNC machining center offered. Type: ZVL 3000 Control unit: Heidenhain TNC 426 CB X-travel: 2200 mm Y-travel: 800 mm Z-travel: 600/800 mm Table: 850 x 2600 mm Weight on table max: 3500 KG Spindle: SK 40 with cooling Speed max: 4000 RPM Toolchanger: 40 pieces Power: 47 KW Included: documentation, parameters, toolholders, chip conveyor and central lubrication system Year: 1997 Dimensions: 625x305x340 cm LxWxH Iajdpfx Aoh Hp Unofaen Weight: ca 12000 KG Movie available! For more information call us or send an e-mail.