Used Floorpul Ruby 55E for sale (65)

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Fpsdpexlngasfx Ahdsn Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: used, Year of construction: 2007, -no machining tools required -spindle replaced in 2018 -NUM control replaced in 2019 -machining dimension X: 5500 mm -machining dimension Y: drilling 1440 mm / milling 1780 mm -safety device: bumpers / protective grating -automatic central lubrication via CNC control Fedpfxjz Ehvrj Ahdopn -central extraction system -rear tool magazine HSK 63 with 24 positions -chip conveyor -TV-Morbidelli table with 10 supports, L=1500mm -vacuum cups, approx. 15 pcs, X=145/Y=145/H=50 mm + approx. 8 pcs, X=145/Y=55/H=50 mm -positioning aids on Morbidelli table -vacuum cup positioning via laser -vacuum pump, 250 CBM/H -drilling head speed adjustable via machine inverter -CNC control with PC office -prepared for teleservice -drilling unit with 30 spindles and 4+2 horizontal spindles -base for vacuum cup attachment to support rail Location: Supplier

Condition: excellent (used), functionality: fully functional, CellCoat RUBY 52 Print Laminator Manual belt feeder, Fpedpezg Eatsfx Ahdjn Single-sided heavy-duty print laminator, Perforator and foil cutter, anti-curl device, automatic desheeter, output table, Laminating temperature 60–120 degrees, Roller pressure 400 tons, Paper weight 125–500 g/m², Production speed 0–20 m/min, Maximum paper size: 52 x 72 cm

Condition: used, Year of construction: 2006, Measuring range: 500x400x400 mm, max. workpiece weight: 180 kg, with measuring probe, manufacturer: RENISHAW, type: MH20I, various ruby replacement measuring probes in a case, and evaluation hardware. Fjdpfxez Nht Hj Ahdspn

Condition: used, Year of construction: 2019, functionality: fully functional, overall weight: 2 kg, Equipment: documentation/manual, RENISHAW OMP 60 3D probe, SK40 OMP60 probe – used Fjdsznk I Sepfx Ahdepn Compact 3D probe With optical signal transmission, it is possible to directly set up and inspect workpieces on the machine and transmit the signal. Possible application area for the probe system for medium and large machining centers, compatible with all optical receivers from Renishaw. Switching methods for the probe can be adjusted. Factory setting for optical on/optical off. Probe stylus, l = 100 mm, Probe ball, Ø 5.0 - ruby ball Mount for OMI-2 receiver - interface Protective hose and fitting for the cable from the receiver unit Diameter 60 mm Battery compartment Weight approx. 1.54 kg Operating manual for the OMP60 probe is available in paper form and on CD-ROM. Made in UK RENISHAW OMI-2 transmitter/receiver OMM with connecting cable Machine interface MI12 Honda Tool holder SK 40 Price negotiable Our asking price is €4,190.00 net, ex works, plus packaging costs. All technical specifications are subject to printing errors and changes. Sale exclusively to countries within the EU.

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, number of axes: 3, This 3-axis Leitz Reference HP 5.4.3 was manufactured in 2020. It features a measuring range of 500 × 400 × 300 mm and includes a granite table, Hexagon LSP-X3 probe system, and a Leitz controller. If you are looking to get high-quality coordinate measuring capabilities, consider the Leitz Reference HP 5.4.3 CMM machine we have for sale. Contact us for further details. • Viewing: Possible by appointment; machine can be seen running • Incoterm/Collection: EXW Technical specifications • Accuracy (MPE-E): 0.70 + L/400 µm • Probing error (MPE-P): 0.80 µm • Table: Granite table • Probe system: Hexagon LSP-X3 • Stylus clamping: HP-S-X3 • Stylus changer: Hexagon 5-port stylus change rack • Change ports: HR-X3-P • Controller: Leitz controller in free-standing cabinet • Operator control: Leitz twin-joystick panel with emergency stop Machine history / service • Aug 2020: Machine and accessories supplied new by Hexagon Metrology • Sep 2020: Software bundle supplied by Hexagon • Feb 2021: 6 additional M2 stepped styli purchased • Apr 2021: Installed and commissioned in Andover by a Hexagon engineer (Installation/service report ref. 15320) • Last calibration: 16 May 2023 by Hexagon Metrology • Standard: ISO 10360-2:2001 • Certificate: CAA/REF769/543/16052023 • Result: Calibration met customer specification • Certificate available on request • Calibration validity: until 24 May 2024 Additional equipment • QUINDOS version 2023 • I++ Simulator + QUINDOS bundle • Additional CMM model • Licence manager for add-on bundle • Software licence transfer: subject to confirmation by Hexagon Peripherals and fixturing • HP workstation PC with 2 monitors • Kinematic fixturing: • Swift-Fix universal kinematic base (1) • Swift-Fix kinematic plates 300 × 300 × 16 mm (2) • Ceramic reference sphere Ø30 mm (1) Styli, holders, adapters, and change hardware • HR-X3-P changer ports (5) • Stylus kit • Special stylus holders (3) Fpedpez H Tmrsfx Ahdsn • 8 × M5 + 8 × Ø2 mm stylus holder (1) • M5/M2 stylus adapter (1) • M2 5-way stylus holder (1) • M2 stepped styli: 4 + 6 • M2 stylus R1 (1) • Special Ø0.3 mm ruby styli (8) • Special Ø1 mm ruby/carbide stylus (1) • Ø1.5 mm Si3N4 stylus (1) • Ø3 × 35 mm ruby stylus (1) • Ø3 × 50 mm ruby stylus (1) • Ø5 × 60 mm ruby stylus (1) • Titanium extension (1) • Rotary joint (1) • Adjustable cubes (2) • M5 cube (1)

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7312 - 3089 - FA, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,200 mm, total height: 350 mm, type of input current: AC, total width: 550 mm, total length: 850 mm, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,200 mm, overall weight: 10 kg, input voltage: 220 V, Equipment: documentation/manual, type plate available, HEXAGON ROMER Absolute Arm 7312 + PolyWorks 2025 Inspector Probing™ + HP ZBook For sale is a very well-maintained and lightly used HEXAGON ROMER Absolute Arm 7312 portable measuring arm, manufactured in 2015. The system was used exclusively in a metrology laboratory and is in excellent technical condition. Included in the sale is a fully configured HP ZBook industrial workstation laptop with current PolyWorks Metrology Suite 2025 / Inspector Probing™ software including transferable dongle license. The measuring arm is ready for immediate operation. Last calibration was performed on 12.01.2022. Technical specifications: * Model: RA7312 * Measuring range: 1.2 m * Arm weight: 10.2 kg * ISO 10360-2 * MPEp: 8 µm * MPEE: 5 + L/40 ≤ 18 µm Technical equipment / scope of delivery: * HEXAGON ROMER Absolute Arm 7312 * Absolute Encoder technology * Integrated digital camera and work light * Haptic feedback * Ergonomic handle * Zero-G counterbalance * Mounting plate * TESA TKJ * Probes with 3 mm / 6 mm ruby ball and 15 mm steel ball * Certified reference bar for 1.2 m measuring range * Total length 305 mm * Including certification * Calibration sphere * Magnetic mount * Transport case * Dust cover * B89 certificate Software / system environment: * PolyWorks Metrology Suite 2025 IR10.2 * Inspector Probing™ * Installed and fully operational software environment * Dongle-based license * Transferable license * Pre-configured measurement system * Ready for immediate use * ROMER arm fully integrated and operational Notebook / hardware: * HP ZBook Workstation * Intel Core i7 processor * 16 GB RAM * NVIDIA graphics card * SSD storage Fpsdpsy Ta A Eofx Ahdon * USB 3.0 * WiFi / Bluetooth Transport / dimensions: * Portable measuring system * Total weight including transport case approx. 20 kg * External dimensions of transport case approx. 850 x 550 x 350 mm * Heavy-duty original transport case included Special features: * Used exclusively in metrology laboratory * Lightly used * Complete package * Ready for immediate use * Current software environment * Portable coordinate measuring technology * Precision measuring arm according to ISO 10360-2 * Ideal for quality assurance, reverse engineering, tool and mold making Inspection and functional test possible by appointment. Sale preferably to commercial buyers. Subject to prior sale and errors excepted.

Condition: used, For sale is a high-quality TESA Micro-Hite 3D height gauge in a large, motorized version, offered as a complete measuring workstation. This system combines precise height measurement with extended 2D/3D coordinate functions, making it ideal for use in quality assurance, metrology, and production. Particularly noteworthy is the extensive range of accessories and the existing PC connection with printing capability, which allows measurement reports to be created and documented directly. Technical specifications: Manufacturer: TESA (Switzerland) Model: Micro-Hite 3D Type: Height gauge / 3D-capable measuring column Measuring range: approx. 600 mm (large version) Resolution: up to 0.0001 mm (0.1 µm) Drive: motorized adjustment Measuring system: digital / electronic Data output: interfaces for PC / peripherals Measuring functions: Height measurement Internal and external measurement Diameter measurement Distance measurement 2D/3D point measurement Geometry and position calculations Fpjdpfxey Tkg Uj Ahdjn Equipment: Granite measuring plate Stable machine base Motorized measuring column Integrated control unit External PC workstation (monitor, computer, input devices) Printer for report output Accessories: Extensive set of measuring probes (ruby tips, extensions, etc.) Tool holders and fixtures Accessory case / wooden box The measuring device has already been disassembled and packed.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, pressing force: 40 t, BAYKAL CNC press brake Mod.: APHS-C 125040 Unused SN: 28542 YEAR OF MANUFACTURE: 09/2021 in the following version: - DELEM control system DA-58T 2D-graphics with touch screen - CNC controlled backgauge with ball screws, X-axis 750 mm + 250 mm, R-axis = 130 mm - Manual table crowning - AKAS laser safety device - Safety cover on the side and rear - 2 pcs. Front support arms on linear guides - Top system tool holder - System tool holder at the bottom - Technical documentation - CE version - Colors: * RAL 7015 - slate gray * RAL 7035 - Light gray * RAL 3003 - Ruby red Technical data: - Pressing pressure: 40 t - Working length: 1,250 mm - Motor connected load: 4 kW - Oil tank volume: 80 lt. - Departure speed: 160 mm/sec. - Working speed: 10 mm/sec. - Retraction speed: 130 mm/sec. - Folding length: 1,250 mm - Stand passage: 1,070 mm - Stand depth: 1,470 mm Fodstz Azdopfx Ahdopn - Table height: 800 mm - Machine height: 2,250 mm - Installation height: 455 mm - Stroke: 215 mm - Table width: 60 mm - Projection: 410 mm - Weight: 3,300 kg Subject to errors and prior sale!

Condition: good (used), functionality: unexamined, tool type: SK 50, overall weight: 3 kg, Renishaw OMP60 Probe head, 3D probe Probe stylus length: 150 mm Probe stylus, ruby, ø6 mm Fpodpoz E Hvwjfx Ahden 5 units available Price per unit, net, ex works, plus VAT and shipping.

Condition: used, Year of construction: 2018, functionality: fully functional, arm reach: 2,500 mm, Equipment: documentation/manual, For sale: A high-quality HEXAGON Absolute Arm 8525 (7-axis) with RS5 laser scanner, purchased new at the end of 2018. The system has been carefully maintained, used exclusively in an industrial environment, and serviced regularly. The measuring arm is ideally suited for: Fjdpfxoy Iagae Ahdopn # Quality control # Incoming goods inspection # In-process measurements # Reverse engineering # 3D scanning and surface capture A valid calibration / ISO-10360-12 certificate is available and can be supplied upon request. Technical data (measuring arm) # Model: HEXAGON Absolute Arm 8525 # Axes: 7 # Measuring volume: 2.5 m # Encoders: Absolute encoders & SMART sensors # Zero-G counterbalance with SmartLock & HomeDock # Wrist display with haptic feedback # SpinGrip & SpinKnob # Base plate with mounting ring RS5 Laser Scanner (installed) # Premium RS5 laser scanner for point and surface scans # Operation in standard or compact mode # Removable pistol grip (sizes: small / medium / large) # ODU-USB & ODU twin cable (USB/LAN) # Certified scan report for arm + scanner Comprehensive accessories (see photos) ✔ Control Pack 3 (wireless, installed) ✔ TESA / TKJ CFRP probes (including 3 mm / 6 mm ruby, 15 mm steel) ✔ Calibration sphere & length gauge ✔ Magnetic mounting plate ✔ Block spring set ✔ Hook wrench ✔ Transport & accessory case (original HEXAGON) ✔ Power supply, dust cover ✔ PolyWorks USB dongle (for Inspector, license status on request) Software # PolyWorks Inspector™ Premium (original purchase) ➡ License details / transferability to be clarified upon request Your advantage # Significantly more affordable than new # Immediately available # Proven industrial quality by HEXAGON # Ideal for QC, contract measurement, prototype construction & manufacturing Inspection & Shipping # Inspection and testing by arrangement possible # Shipping carefully packaged in the original case # Collection preferred

Condition: used, Year of construction: 2005, load capacity: 2,600 kg, construction width: 1,200 mm, Multi-pallet fork ISO class: ISO class 2 = 1,000 - 2,500 kg Technical condition: good Description: Capacity 2600 kg Year 2005 ISO 2A (41 cm) Sideshift Opening range 560-1960 mm Forks 1200 mm Width 1200 mm ID OS787 Fodpfxot T E Nhe Ahdspn

Condition: excellent (used), functionality: fully functional, A very nice Polar cutting machine is for sale. Type 55 EM. Fpedez Hn Abopfx Ahdjn Features hydraulic pressing and a chrome table. Comes complete with 3 extra blades and tools, plus a manual. You are welcome to test this machine at our facility. We can arrange transport and packaging for you, and load it into a truck or container. Please inquire about a price including transport (location within the Netherlands). Best regards, Henk Hoos.

Condition: used, mileage: 8,361 km, power: 338 kW (459.55 HP), first registration: 04/2026, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 09/2028, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: air conditioning, Internal vehicle number: G400227 Available immediately at our yard in Kaufungen. More information: * Luis Lucena * Viktoria Sologubova Mercedes-Benz Arocs 3246 8x4 Meiller three-way tipper – Bordmatik – Year 2026 German Mercedes-Benz Arocs 3246 8x4 three-way tipper, manufactured in 2026, with only 8,361 km mileage. The vehicle is equipped with a Meiller TRIGENIUS D421 tipper body, left-side Bordmatik hydraulic side walls, an automatic transmission, automatic climate control, and extensive driver-assistance systems. Technical data: * Vehicle number: G400227 * Vehicle condition: Used * Category: Three-way tipper * Manufacturer: Mercedes-Benz * Model: Arocs 3246 Fpedpfx Ahjzuqr Rodsn * First registration: 04/2026 * Year of manufacture: 2026 * Mileage: 8,361 km * Engine displacement: 10,677 cm³ * Power according to vehicle data: 338 kW (460 hp) * Fuel type: Diesel * Transmission: Automatic * Emission class: Euro 6 * Environmental badge: 4 (Green) * Permissible gross weight: 32,000 kg * Unladen weight: 13,857 kg * Payload: 18,143 kg * Axles: 4 * Wheel arrangement: 8x4 * Leaf spring suspension, front and rear * Color: Ruby Red * TÜV (technical inspection): New * German vehicle Meiller tipper body: * Meiller TRIGENIUS D421 * Three-way tipper * Internal dimensions of the tipping platform: approx. 5,800 × 2,420 × 900 mm * Side wall height: 900 mm * Front wall height: 1,100 mm * Bordmatik on the left side * Bordmatik switching * Mechanical roll tarp * Tipping control in the cab * Meiller 9-piston hydraulic pump * Access ladder under the tipping platform * Lashing points in the tipping platform floor * Shovel and broom holder * Short protective canopy for the tipper body Cab and comfort: * M ClassicSpace cab * Automatic climate control * Hot water auxiliary heating * Comfort suspension seat for the driver * Passenger-side functional seat * Multimedia cockpit Interactive 2 * Navigation system * Digital radio * Reversing camera * Cruise control * Refrigerator on the engine tunnel * Rain sensor * Light sensor * Central locking * Electrically heated front mirror * Sunroof * Air horns on the cab roof * 24V socket Safety and assistance systems: * Active Brake Assist 6 Plus * Active Sideguard Assist 2 * Frontguard Assist * Lane Keeping Assist * Traffic Sign Assist * Attention Assist 2 * Reversing warning * LED daytime running lights * LED fog lights * Stone guard for the headlights * Tail lights with protective grilles Inspection and test drives are possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 5 h, power: 5 kW (6.80 HP), input voltage: 400 V, pivoting range: 45 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,500 rpm, table width: 530 mm, table length: 1,200 mm, overall weight: 510 kg, tool diameter: 240 mm, Equipment: CE marking, Professional woodworking machine with tilting milling spindle and cantilever arm. Exhibition machine like new - used only for demonstration purposes Milling unit made from cast iron, tiltable up to -45° backwards Fjdpfx Asyn Ny Ujhdjpn Four milling speeds from 3500 to 10000 rpm Forward and reverse rotation Height and tilt display accurate to 0.1 mm Quick speed change via eccentric clamping Powerful 5.0 kW industrial motor Curved milling hood included Made in Italy Milling spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Speed indication via LED display on the front panel Spindle shaft diameter 30 mm Max. tool diameter 240 mm Max. retractable tool diameter 230 mm Max. tenoning tool diameter 320 mm Accessories included: Mitre fence with two flip stops Eccentric clamp Curved milling safety guard Additionally, adjustable system fence jaws The machine can be inspected and tested at any time at the Chemnitz location.

Condition: used, mileage: 8,361 km, power: 338 kW (459.55 HP), first registration: 04/2026, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 09/2028, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: air conditioning, Internal vehicle number: G400227 Available immediately at our yard in Kaufungen. More information: * Luis Lucena * Viktoria Sologubova Mercedes-Benz Arocs 3246 8x4 Meiller three-way tipper – Bordmatik – Year 2026 German Mercedes-Benz Arocs 3246 8x4 three-way tipper, manufactured in 2026, with only 8,361 km mileage. The vehicle is equipped with a Meiller TRIGENIUS D421 tipper body, left-side Bordmatik hydraulic side walls, an automatic transmission, automatic climate control, and extensive driver-assistance systems. Technical data: * Vehicle number: G400227 * Vehicle condition: Used * Category: Three-way tipper * Manufacturer: Mercedes-Benz * Model: Arocs 3246 * First registration: 04/2026 * Year of manufacture: 2026 * Mileage: 8,361 km * Engine displacement: 10,677 cm³ * Power according to vehicle data: 338 kW (460 hp) * Fuel type: Diesel * Transmission: Automatic * Emission class: Euro 6 * Environmental badge: 4 (Green) * Permissible gross weight: 32,000 kg * Unladen weight: 13,857 kg Fpodpfx Asz Amvhshdsn * Payload: 18,143 kg * Axles: 4 * Wheel arrangement: 8x4 * Leaf spring suspension, front and rear * Color: Ruby Red * TÜV (technical inspection): New * German vehicle Meiller tipper body: * Meiller TRIGENIUS D421 * Three-way tipper * Internal dimensions of the tipping platform: approx. 5,800 × 2,420 × 900 mm * Side wall height: 900 mm * Front wall height: 1,100 mm * Bordmatik on the left side * Bordmatik switching * Mechanical roll tarp * Tipping control in the cab * Meiller 9-piston hydraulic pump * Access ladder under the tipping platform * Lashing points in the tipping platform floor * Shovel and broom holder * Short protective canopy for the tipper body Cab and comfort: * M ClassicSpace cab * Automatic climate control * Hot water auxiliary heating * Comfort suspension seat for the driver * Passenger-side functional seat * Multimedia cockpit Interactive 2 * Navigation system * Digital radio * Reversing camera * Cruise control * Refrigerator on the engine tunnel * Rain sensor * Light sensor * Central locking * Electrically heated front mirror * Sunroof * Air horns on the cab roof * 24V socket Safety and assistance systems: * Active Brake Assist 6 Plus * Active Sideguard Assist 2 * Frontguard Assist * Lane Keeping Assist * Traffic Sign Assist * Attention Assist 2 * Reversing warning * LED daytime running lights * LED fog lights * Stone guard for the headlights * Tail lights with protective grilles Inspection and test drives are possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved.

Condition: used, Year of construction: 2023, Used Machine Year of manufacture: 2023 Condition: like new; machine has never been used Features and technical specifications: - Spindle speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm - Milling spindle tilt: 0 to -45° - Effective spindle length: 125 mm - Spindle arbor diameter: 30 mm - Speed display: LED display on the front of the machine - Max. tool diameter (standard): 240 mm - Max. lowerable tool diameter: 230 mm Fodezk Nn Aspfx Ahdepn - Max. tool diameter for profile milling: 240 mm - Max. tool diameter for tenon milling: 320 mm - Work table length: 1,200 mm - Work table width: 530 mm - Table height: 900 mm - Slide length: 1,200 mm - Slide width: 360 mm - Slide height: 142 mm - Exhaust port diameter: 2 × 120 mm - Drive motor power: 5.0 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Dimensions: 1,200 × 2,000 mm Weight: 510 kg Availability: available shortly Storage location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: AL/009416, functionality: fully functional, travel distance X-axis: 5,500 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 400 mm, number of axes: 5, Equipment: CE marking, 5-AXIS CNC WORKING CENTER MORBIDELLI MOD. AUTHOR X5.55 EVO – CE RULES - Working dimensions: X 5.500 mm Y 1.700 mm Z 400 mm - Chip conveyor belt for wastes Fsdpsywd Adsfx Ahdspn - Automatic centralized lubrication system - Optimized and centralized dust extraction system - 5-axis milling unit 11 kW (15 HP), HSK-63 PRISMA - Liquid-cooled electrospindle - Drilling unit with No. 18 vertical spindles and No. 6 horizontal spindles - TV-MORBIDELLI worktable with 10 supports, L = 1,500 mm - Laser device for suction cup positioning - Saw blade Ø 300 mm - No. 2 additional central side stops - No. 2 additional side stops - No. 30 suction cups - Tool magazine with 12 positions - Becker vacuum pump 250 m³/h (year 2022) - NUM CNC control - No. 10 lifting devices to assist loading - Voltage: 400 V / 50 Hz - S/N AL/009416 - Year 2009

Condition: excellent (used), mileage: 221,856 km, power: 390 kW (530.25 HP), first registration: 07/2020, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: intarder, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2020, Equipment: AdBlue, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, navigation system, onboard computer, power assisted steering, power mirror, trailer coupling, - Aluminum fuel tank - Rear work lights - Front work lights - Brake booster - DAB radio - Differential lock - High beam headlights - Low noise - Speed limiter - Cabin - Refrigerator - Leather interior - Leather upholstery - Air suspension - Air-suspended seats - Air horn - Rotating beacon - Rearview camera - Sun visor - Tool box - Power take-off (PTO) - Tow hitch Axle configuration Maximum front axle load: 9000 kg Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 11500 kg Rear axle 3: Lift axle; Max. axle load: 7500 kg; Steerable Weights Unladen weight: 29,641 kg Payload: 7,359 kg GVW: 37,000 kg Functional Mast: Telescopic (14 sections) Lifting capacity: 22,000 kg Body brand: HIAB 1055 E-8 HIPRO JIB 150X-6 CE marking: yes Interior Upholstery: Leather Condition Technical condition: very good Optical condition: very good Identification License plate: 73-BPR-6 # DAF XF 530 8x2 flatbed truck with HIAB 1055 E-8 HiPro crane + JIB 150X-6 ## General data Brand: DAF Type: XF 530 8x2 flatbed truck Chassis year of manufacture: 2020 Mileage: 221,856 km Engine power: 530 hp Emission standard: Euro 6 Transmission: Automatic Axle configuration: 8x2 Cabin: Space Cab Drive: 8x2 with steerable trailing axle --- # Vehicle description This exceptionally well-equipped DAF XF 530 8x2 was specifically built for demanding lifting and transport operations and is in excellent technical and optical condition. In 2018, the vehicle was completely rebuilt and fitted with high-quality stainless steel components. Behind the cab, a powerful HIAB 1055 E-8 HiPro loading crane with JIB 150X-6 is mounted. This combination enables outstanding lifting performance as well as an enormous reach and is ideal for professional heavy-duty and crane operations. Thanks to its high-quality equipment, this vehicle is immediately ready for use by construction companies, machine relocation, steel construction, industrial applications, and special transport. --- # Chassis * DAF XF 530 Euro 6 engine * 530 hp * Automatic transmission * Fully air-suspended chassis * Steerable trailing axle * Differential locks * Heavy-duty PTO * Additional hydraulic oil cooler * Disc brakes * Engine brake * Cruise control --- # Space Cab equipment Comfortable Space Cab with, among other things: * Air conditioning * Parking heater * Leather interior * Comfort seats * Multifunction steering wheel * Navigation system * Electric windows * Electrically adjustable mirrors * Central locking * Refrigerator * Luxury dashboard * Numerous storage compartments Fpedpozhw Nvofx Ahdjn * Radio / Bluetooth * Sun visor * Roof lighting --- # Flatbed body Professionally built with: * Aluminum side walls * Aluminum stake pockets * Tie-down points all around * Hardwood floor * Complete stainless steel design * Stainless steel fenders * Large stainless steel toolboxes under the loading area...

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 39.963TW, working height: 1,300 mm, planer shaft diameter: 60 mm, workpiece height (max.): 250 mm, workpiece width (max.): 300 mm, power: 18.5 kW (25.15 HP), A new two-sided planing machine is for sale! TECHNICAL DETAILS Processing: Two-sided planing (calibrating) Thickness tolerance: < ±0.1 mm Workpiece length min./max.: 800 / 3,200 mm Fpedpfx Ahsz A Ubiodjn Minimum length for continuous feed: 1,250 mm Workpiece width max.: 300 mm Workpiece height min./max.: 20–250 mm (each ±1 mm) Passage height: 280 mm Working height: approx. 1,300 mm Number of spindles: 2 Spindle diameter: 160 mm Planer shaft diameter: 60 mm Feed speed: 5–20 m/min, continuously adjustable Ram columns: 4 × Ø 110 mm MACHINE DETAILS Input voltage: 3 × 400 V AC Frequency: 50 Hz Network type: TNS, for industrial networks Control voltage: 230 V AC / 24 V DC Power: 18.5 kW Power of feed motor: 9 kW Compressed air connection: 8 bar Electrical equipment: Télémecanique / MOELLER / SIEMENS Machine color: RAL 7035 Light Grey / RAL 3003 Ruby Red Cabinet color: RAL 7035 Light Grey / RAL 3003 Ruby Red Total weight: 7,000 kg EQUIPMENT Continuously adjustable feed speed Feed rollers individually and directly driven by separate gear motors Electronically synchronized feed rollers Grooved feed rollers in front of the planer shafts Smooth feed rollers at the outlet Hard-chrome-plated tables, feed rollers, pressure elements, and stops Automatic feed deceleration in case of overload Processing motors with electronic soft start controls Integrated DC motor brakes Télémecanique ALTISTART Control panel on a pivoting arm on the front wall of the cabinet

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, Technical data: Cutting length: 3100 mm Max. sheet thickness, St 42: 10 mm Max. sheet thickness, INOX/V2A: 6.0 mm Cutting angle: 2.0° Stroke rate: 12 per minute Rear gauge range: 5.0 mm to 1000 mm Motor power: 22 kW Hydr. clamps: 17 pcs Oil tank capacity: 170 l Max. oil pressure in the cylinder: 260 kg/cm² Standard accessories: - CNC-controlled, motorized rear gauge. Travel distance 1000 mm. With backlash-free ball screws. - Table construction, closed design, consisting of interchangeable support plates including ball rollers - Manual cutting gap adjustment, centrally operated on the right side stand - Electric motor: 400 V, 50 Hz, 3-phase - Single or continuous stroke - Tip function for lowering the top beam, e.g., for adjusting the cutting gap - Side gauge 90°, 920 mm long, measuring length from the cutting line 1000 mm - 2 additional support brackets Design of the two front support brackets with scale, T-slots, and tilting cams - CNC control Cybelec "Cybtouch 8W" for automatic adjustment - of the cutting gap (option) - of the rear gauge - of the cutting length Further programming functions: - Step repetition - Piece counter - Finger protection light curtain at the front instead of a safety grille, allowing an unobstructed view of the cutting zone After interrupting the cutting function of the shear and the clamps by activating the light curtain, the cutting function is immediately released again when the operator's hand(s) are no longer in the danger area. The reset button does not need to be pressed. - Rear gauge - retraction - "Return to sender", smallest sheet part 100 mm x 160 mm (not possible with sheet support type "A", only with sheet support "U") RS-232 interface, LCD screen 128 x 64 mm. - 1 set of blades mounted on the machine for cutting steel with a strength of 450 - 700 K/mm². Cutting edges: top blade 2, bottom blade 4, material grade "K110", manufacturer: Böhler Germany/Austria - Individually acting hydr. clamps with plastic inserts - Oil level indicator - Oil filling - Display of the cutting line by blade illumination and wire - Operating hour counter - CE conformity - Operating manual, spare parts list, wiring diagram, hydraulic diagram - Painting, 3-color: Body: RAL7015 slate gray; Side covers: RAL7035 light gray; Finger protection: RAL3003 ruby red Included: Motorized cutting gap adjustment. Controlled via CNC Cybelec "Cybtouch 8W". Fpedpfx Aszlpahohdon

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, workpiece weight (max.): 50 kg, input voltage: 115 V, type of input current: AC, laser power: 100 W, type of cooling: air, total width: 450 mm, total height: 853 mm, total length: 806 mm, working range: 150 mm, overall weight: 92 kg, warranty duration: 24 months, height adjustment type: electric, space requirement height: 1,080 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, Equipment: cabin, The SpeedMarker 330 is the compact desktop laser from the SpeedMarker series, designed for users who want to laser mark small to medium-sized batches efficiently, reproducibly, and close to production. Unlike many standard workstations, the SpeedMarker 330 relies on clearly defined software workflows instead of complex machine configurations. As an industrial laser marking system, it combines galvo high-speed technology, a 100 W MOPA fiber laser (1064 nm), and the Ruby® laser software into a powerful production system that can be easily integrated into your workflow. The SpeedMarker 330 stands for standardized, controllable marking processes – without the complexity of customized systems. Key features: The SpeedMarker 330 Black Line combines advanced fiber laser technology with high marking speed, making it the ideal solution for industrial marking, traceability, and product customization. Its powerful 100 W laser source enables fast and precise marking on metals, plastics, and coated materials, thus maximizing productivity in demanding production environments. The intelligent autofocus technology automatically compensates for different component heights, reducing setup times while ensuring consistently high marking quality across various applications and batch sizes. Fjdszcc Uzspfx Ahdopn The powerful galvo system offers exceptional speed and accuracy, producing sharp text, detailed graphics, barcodes, QR codes, and serial numbers with excellent repeatability and high contrast. The intuitive software for marking, with support for common industry-standard file formats and variable data, enables quick job setup, while real-time visualization and simulation help optimize workflows and avoid errors before production begins. Thanks to its compact, ergonomic design, the SpeedMarker 330 Black Line can be used as a standalone workstation or seamlessly integrated into automated production lines, offering flexibility, reliability, and efficiency for industrial marking applications.

Condition: excellent (used), Year of construction: 2020, Minipack Torre Replay 55 Evo Shrink wrapping chamber machine 2020, up to 300 products per hour, programmable, max product dimensions 500mm x 380mm x 200mm, 1Ph Fsdpfx Ahozcg Edsdepn

Condition: used, mileage: 326,000 km, axle configuration: 6x2, wheelbase: 5,550 mm, gearing type: automatic, emission class: euro5, Year of construction: 2014, Equipment: air conditioning, = Additional options and accessories = Fpjdpfszvx Rqjx Ahden - Power take-off (PTO) = Further information = Year of manufacture: 2014 Front axle: Steerable

Condition: excellent (used), Kontron 325, ternary low-pressure gradient pump, HPLC pump, up to 10 mL, pump system - Pump system for ternary low-pressure gradients - All devices for low-pressure gradients integrated into a single system - 10 programs with individual instructions - Column Shock Protection extends the service life - intelligent compressibility compensation - Stackable with other/additional HPLC modules - Full control of the Autosampler 360 via the keyboard with a display Type: double serial piston-powered Materials: SS 316, PTFE, KEL-F, ceramic, ruby and sapphire Fsdpfjlkbptjx Ahdopn Flow rate: 0.05 to 10 mL per minute Flow rate precision: