Used Floorpul Ruby 55 for sale (6,296)

Condition: good (used), Powered tools, VDI 50 standard RÖHM 14.9934.0550-00, No. 5601 RÖHM 14.9934.0551-00, No. 5740 and various other models available Dkedpfxsz Ea Nkj Apisw Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2010, Panel saw Dsdpfx Ae Adzc Aspiskw Manufacturer: Nardello Model: Elegance S/N2155 Year of manufacture: 2010 Technical specifications: - with infeed and outfeed roller conveyor - Minimum width: 60 + 60 mm - Maximum width: 450 + 450 mm - Length: 350 - 2,000 mm - Panel thickness: 15 - 30 mm Note: The technical specifications and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), mileage: 46,706 km, power: 132 kW (179.47 HP), first registration: 08/1999, fuel type: diesel, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 4,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, suspension: steel, total length: 7,520 mm, total width: 2,550 mm, total height: 3,800 mm, loading space length: 5,390 mm, loading space width: 2,460 mm, loading space height: 2,550 mm, Equipment: ABS, tachograph, tail-lift, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Fixed - Halogen lamp - Short cab - Tail lift - Manual - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Tare weight: 6590 kg, Gross vehicle weight: 15000 kg, Total tank capacity: 200 liters, Tow hitch, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 255 tons, Type of cab: Short cab, Tachograph (driver's card), Color: White, Heated mirrors, Type of lighting: Halogen lamp, Engine power: 132 kW (177 hp), Displacement: 5883 cc, Fuel: Diesel, Type of transmission: Manual, Transmission type: ZF, Gears: 6, Clutch pedal, Power steering, ABS, System type: ., Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 3000 kg, Tail lift manufacturer: Mbb hubfix, Tail lift material: Aluminum, Tail lift size: 263x252, Spare wheel, Tread depth of spare wheel: 13% = Further Information = Transmission Transmission: ZF, 6 gears, Manual transmission Axle Configuration Tire size: 285/70R19.5 Suspension: Leaf spring suspension Axle 1: Steered; Tire tread depth left: 12 mm; Tire tread depth right: 12 mm; Brakes: Disc brakes Axle 2: Double tires; Tire tread depth left inner: 12 mm; Tire tread depth left outer: 12 mm; Tire tread depth right inner: 12 mm; Tire tread depth right outer: 12 mm; Brakes: Drum brakes Weights Tare weight: 6,590 kg Payload: 8,410 kg GVW: 15,000 kg Functional Tail lift: Mbb hubfix, Rear door, 3000 kg Height of loading platform: 114 cm Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! Dodps Ad Urwsfx Apiokw • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Calculate your lease rate quickly and send an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), Lowara FHE50-160/55P Centrifugal pump Unused, end suction centrifugal pump, 316 stainless impellers, suitable for pumping hot or cold mildly aggressive liquids, with 5.5Kw motor, 3Ph Dkjdj Ad Rfyjpfx Apiow

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 3200 mm Cutting width at rip fence: 1000 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 200 mm Scoring unit: no Saw blade height adjustment: handwheel Saw blade tilt adjustment: handwheel Rip fence adjustment: manual Dedpfjwm Nrcex Apiskw Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Maximum saw blade diameter: 550 mm Saw blade diameter, fully retractable under table: 500 mm Motor power: 9 kW Motor brake: yes / automatic Extraction connection: 100 mm and 120 mm Machine length: 3500 mm Machine width: 2000 mm Weight: 900 kg

Condition: new, color: black, driver cabin: other, gearing type: other, Vehicle location: Bovenden, hydraulic side locking system. Body: 26t hooklift system for containers from 4.3m to 6.6m, hook height 1,570 mm, titanium model, hydraulic combined container locking (internal and external), mechanical pickup hook locking, plastic cover over control block, pneumatic cab controls, full-speed mode, oil tank supplied with 2" hoses & connection materials, 84L standard pump, mounting kit torsion-resistant for 14 mm bolts, device length: 5,500 mm! 4th control block for additional hydraulics. Surcharge for retrofitting with radio control: 6,000.00 EUR. Underrun protection available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, intermediate sale, and errors! Dkedpjwngnkjfx Apiow

Condition: good (used), Year of construction: 2002, functionality: fully functional, I sell a block machine for formatting scantlings into pallet blocks. Possible dimensions of blocks from 70 to 160. very good condition. Dksdpjvbcl Hjfx Apisw

Condition: used, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Dkjde Aa Ayhepfx Apiew TECHNICAL DETAILS Travel distances X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 380 mm Quill travel: 60 mm Work table Table size: 700 × 425 mm Number of T-slots: 6 T-slot width: 14H7 mm T-slot spacing: 63 mm Table load capacity: max. 250 kg Spindle and tool holder Tool holder: SK 40 Swiveling vertical head: 90° on both sides Speed range for driven tools: 5–3,000 min⁻¹ Drive power for milling spindle: 5.5 kW Performance data Total power consumption: 10 kW Machine weight: approx. 2 t Dimensions Space requirement: approx. 2 × 2 × 2 m EQUIPMENT Swiveling vertical head 6 T-slots

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, The machine is currently undergoing refurbishment; updated photos will be provided. Cutting length: 5000 mm with 2 saw blades operating simultaneously (for extra-long cuts up to 10 meters). Windows 10 PC New saw motors Pneumatics largely new or refurbished Dkodo Afbrgopfx Apiew With uninterruptible power supply Additional tensioner on the roller conveyor Swiveling material support Automatically positionable via a DC motor, movable saw unit on hardened linear guide rails Travel speed approx. 20 m/min. Minimum section length 335 mm (5 mm) Maximum cutting length 5350 mm (9000 mm) Saw blade drive: 2 x 3 kW, 400 V, saw blade speed 2650 rpm Automatic electronic miter adjustment as standard up to 22.5° outwards and 45° inwards via servo motors External and internal dimension cutting Robust construction and proven workmanship guarantee the highest dimensional accuracy. Extremely stable welded construction with chip collection drawers in the machine bed Particularly large cutting area due to 550 mm saw blades Hydropneumatic saw blade feed Clamping devices, horizontally pneumatic, 1 each on the left and right of the saw blade Roller conveyor, 1.5 m long, with additional material support at the end of the frame LUBETOOL timed spray device Pneumatic saw blade guard Operation via two-hand control according to BG regulations Suction nozzle for connecting a chip extraction system Includes 2 carbide circular saw blades, 550 mm Optionally also available with an integrated extraction system!

Condition: used, Year of construction: 2002, functionality: fully functional, 4-axis machine with WOODWOP 4.5, from a carpentry workshop Working dimensions: X-axis 3,200 mm Y-axis 1,250 mm Work table: 6 pcs workpiece supports, each with 3 vacuum cups 4 pcs lifting rails for heavy workpieces 1 rear and 1 front stop row Vacuum pump 100 m³/h Tool arrangement: Main spindle 7.5 kW HSK 63 F with water cooling Speed 1,500 - 18,000 rpm with C-axis / positioning axis for adapter tools Drilling unit with 18 vertical spindles 6 drilling spindles horizontally Dado saw unit fixed in the X-direction Tool changer magazine, 8 positions, mounted at the rear of the support, moving in the X-direction, for milling tools and units Control: HOMATIC 2000 with WOOD WOP 4.5 Safety equipment: Dedpfxe Afh Izo Apiekw ----- * Foot mat protection in front of the machine Without tools

Condition: used, Horizon Sheet Delivery, BT-4055, Used The Horizon BT-4055 is a manual, fixed sheet delivery unit used at the end of print production lines. This device is often used in combination with folding and stitching machines to catch and stack finished print products. Key Features: - Continuously adjustable tilt for optimal adaptation to different materials - Robust construction for long-lasting use - Simple operation without complex mechanisms Technical Specifications: - Maximum sheet format: 400 x 550 mm - Stack height: Varies depending on settings and material Dkedpfx Aow Evakjpisw All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: good (used), functionality: fully functional, Year of construction: 2003, In good condition, 2 units Dksdpew Ihibefx Apiow

Condition: good (used), Year of construction: 2023, operating hours: 159 h, Used, oil-free, variable 55 kW screw compressor Immediately available! (Subject to prior sale!) ALMIG LENTO 55 WK (water-cooled) with Air Control Premium controller The compressor is in very good condition and has only run for 157 hours so far. Year of manufacture: 2023 Operating hours: 157 h Technical data Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min Dkedpfx Asxud Eqopiew at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: ready for operation (used), DMG 110498 Monitor with control panel, ID: 2341559, serial number: 506112907, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dkjdpfe Ahvglox Apiew

Year of construction: 2023, condition: ready for operation (used), WHEEL CUTTING MACHINE FOR PALLET BLOCKS. MACHINE WORKING ON OCCASION. MINIMUM 50X50mm MAXIMUM 150X150mm Dedpfx Apjk Nf S Rsiokw

Condition: good (used), Year of construction: 2007, Single shaft shredder Weima WLK10 Dodpfstpcpnex Apiskw main motor 55kw rotor length 100cm the machine is 100% efficient

Condition: used, Year of construction: 2002, Used Machine Year of Manufacture: 2002 Features and Technical Specifications - CNC machining center for drilling, milling, and grooving operations - HOMATIC 2000 control system with woodWOP for convenient, workpiece-oriented programming - Liquid-cooled milling spindle for consistent operating temperatures and reliable operation at high cutting rates - HSK 63 tool holder with high clamping force for precise machining - Automatic tool changer - Digital axis drives - Positioning accuracy according to the manufacturer: 0.03 mm Dkjdpfe Af I Uwox Apijw - Travel speeds X/Y/Z: 80/60/20 m/min - Travel range of the Z-axis: 370 mm - Maximum workpiece thickness: 100 m - Working length X/Y: 3,250/1,300 mm - Usable machining area depends on the tool and unit - Electrical power consumption: 14–22 kW, depending on configuration - Vacuum pump capacity according to brochure: starting at 100 m³/h - Compressed air connection: R 1/2 - Required compressed air pressure: 7 bar - Central exhaust connection: Ø 250 mm - Required extraction capacity: at least 4,950 m³/h Additional features: - Vertical drilling spindles, individually controllable - Horizontal drilling spindles in the X and Y directions - Groove saw unit - 8-position tool changer, moving in the X and Y directions, for short tool change paths - C-axis for freely programmable positioning of compatible units from 0–360° - Crosshair laser as a positioning aid for quick setup - Cantilever table with freely positionable, hose-less vacuum suction cups; alternatively, a base or matrix table - For the console table version: workpiece loading aids, lowerable stops, and electric vacuum monitoring - Weight: approx. 4,500 kg Machine is available for demonstration in 15528 Spreenhagen The connected SCHUKO VacoVent 750 dust collector is also available for purchase: samstag.gmbh/maschinenbestand/1333-5931

Condition: excellent (used), Year of construction: 1995, upon request Dedpfofxgmgjx Apijkw

Condition: not inspected (used), Year of construction: 1994, operating hours: 41,564 h, functionality: unexamined, (Pictures are condition) Optional purchase: Current condition = 12.500 € Liability excluded - spare parts, service and maintenance can be offered Overhauled condition = 13.500 € Check of the Intensifier 3 months warranty (not on spare and wear parts) Renewed condition = € 17,999 (refurbish) 12 months warranty (not on spare and wear parts) New pressure intensifier, new control unit, new HP pump, hydraulics cleaned and checked. we offer a discount when concluding a maintenance or service contract! Dkodpfjguqucjx Apisw Contact us and we will make you a customized offer!

Condition: used, Year of construction: 2013, Year of manufacture: 2013 240 V, IP 65 Dkedozrglzspfx Apiew Operating pressure: 6-8 bar

Condition: good (used), fuel type: diesel, lifting height: 25,100 mm, Year of manufacture: 2021 Empty weight: 19.530 kg Lifting capacity: 5.500 kg Dimensions of cargo space: 826 x 250 x 311 cm Technical condition: good Visual appearance: good Delivery terms: EXW Please contact Christian Theißen for more information Manufacturer: JCB Model: 555P260R Year of build: 2021 Condition: Used Data: Max. lifting height: 25,14 m Lifting capacity: 5.500 kg Max. extension: 21,80 m Length forks: 1,20 m Drive type: Diesel Total dimensions LxWxH: 8,26 x 2,50 x 3,11 m Dkodpszn Nu Rjfx Apijw Transport dimensions LxWxH: 8,19 x 2,50 x 3,03 m Rotation range: endlos Empty weight: 19.530 kg Special features: All-wheel drive, all-wheel steering, differential lock, supports, automatic attachment recognition. Location: 41468 Neuss immediately available

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Spindle Speeds: To 1800 RPM Dkedezrnkrjpfx Apiew Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: like new (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, machine/vehicle number: UC 2109/29604202, power: 55 kW (74.78 HP), rotational speed (max.): 1,500 rpm, input voltage: 415 V, input frequency: 50 Hz, input current: 93 A, type of input current: three-phase, type of cooling: air, protection type (IP code): IP55, Siemens drive motors 55 kW Speed controllable via frequency inverter Dkedjx Hizdspfx Apiow As-new motors, never used

Condition: new, functionality: fully functional, Drill-milling machine FM 55 HSV equipped with height adjustment of the milling head via an auxiliary motor and automatic quill feed. The basic configuration already includes all essential accessories (3-axis digital readout, power feed for the milling table, central lubrication, cooling device, LED work light, cast iron base with coolant channel, CE-compliant safety equipment), making this machine suitable for universal applications. Standard equipment includes automatic quill feed and threading mode Rapid X-axis table adjustment thanks to automatic feed with rapid traverse function Cast iron machine base ensures vibration-free operation Enhanced productivity thanks to the standard 3-axis positioning display Two-stage motor with 12 selectable speeds (75 – 3200 rpm) Versatile use – e.g. slot milling, surface milling, boring, etc. Milling head tilts both sides for angled drilling, edge milling, etc. Stability due to dovetail guideways for the gear head Dovetail guideways in the X, Y, and Z axes, adjustable via gib strips Convenient milling head height adjustment by motor Manual central lubrication for all guideways Technical specifications Max. drilling capacity: 32 mm Max. drilling capacity in castings: 40 mm Max. face mill diameter: 80 mm Spindle/column distance max.: 220 mm Spindle/table distance: 95 – 485 mm Quill stroke: 120 mm Automatic quill feed – range: (3) 0.10 / 0.18 / 0.26 mm/rev Min. spindle speed: 75 rpm Max. spindle speed: 3200 rpm Speed change – number of steps / stepless: 12 Spindle taper: MK 4 Dedpfoytdy Tsx Apiskw Table size – width: 800 mm Table size – depth: 240 mm Travel in X-axis: 420 mm Travel in Y-axis: 200 mm Head vertical adjustment: 390 mm Head swivel: -60° to +60° T-slots (number, size, spacing): 14 mm Quill vertical lifting motor power: 90 W Motor power: 1.5 / 2.2 kW Motor power S1 100%: 1.1 / 1.5 kW Voltage: 400 V Dimensions – width: 1270 mm Dimensions – depth: 960 mm Dimensions – height: 2120 mm Weight approx.: 447 kg Scope of supply 3-axis digital readout ES-12V LCD 3–16 mm / B16 quick-action drill chuck Drill chuck arbor MK 4 / B16 Spindle M 16 Reducer sleeve MK 4/3 Combined milling arbor MK 4/27 mm Automatic quill feed Height-adjustable safety guard Milling head lifting motor Central lubrication X-axis table feed AL 450 D LED work lamp Electronic spindle speed indicator Electronic quill stroke indicator Thread-cutting mode Slat safety guard Cooling system Longitudinal scale Cast iron base with coolant system Operator tools

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 95428, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, workpiece length (max.): 1,200 mm, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 450 mm Table length: 750 mm Table width: 600 mm Maximum workpiece length: 1,200 mm Maximum workpiece width: 850 mm Maximum workpiece height: 400 mm Maximum workpiece weight on table: 1,600 kg Tool changer (number of tools): 24 Dkjdpjyhn Hgjfx Apisw Maximum electrode weight: 100 kg MACHINE DETAILS Connection: 50 Hz 3x 400 V Dimensions & weight Dimensions (L x W x H): 3,150 x 2,750 x 2,960 mm Machine weight: approx. 4,500 kg EQUIPMENT C-axis Tool holder system EROWA Fire suppression system Lamp