Used Ciata Thi-30 for sale (24,009)

Condition: used, Year of construction: 2007, number of spindle speeds 10.000 U/min NC rotary indexing table Ø 630 mm control HEIDENHAIN - iTNC 530 numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition and can be inspected under power at any time. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U Crsdpfx Adozaf Husxsc

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 07/2027, overall weight: 258 kg, input frequency: 50 Hz, electrical fuse: 16 A, Tilting mixer Kemper F 30 SL Stainless steel bowl and kneading arm Flour dust cover, NEW 2 speeds, 1 timer robust design Csdoyurd Aopfx Adxorc DGUV V3 tested – available only from us Connection: 400V, 16A CEE plug Used machine Visit our wide selection of tilting mixers!

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Cedpoy Urtfefx Adxsrc Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2018, operating hours: 3,656 h, load capacity: 3,000 kg, lifting height: 4,590 mm, fuel type: diesel, mast type: triplex, construction height: 2,175 mm, empty load weight: 4,682 kg, mileage: 3,656 km, Diesel triplex forklift Brand: Still Year: 2018 ONLY 3,656 hours Capacity: 3,000 kg Lifting height: 4,590 mm Passing height: 2,175 mm CONTAINER forklift FREELIFT and SIDESHIFT FOURTH FUNCTION Watch the video on YouTube Cedpfx Asy Apm Sedxorc

Condition: good (used), Year of construction: 2011, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 406mm, 660mm maximum cutting length, Crjdpfoy Tkabsx Adxsc 51mm Bar capacity main spindle, 30Hp 4,000rpm main spindle speed, Sub-spindle speed 4,000rpm, 20Hp power, milling speed 6,000rpm, 12 Station turret, swarf conveyor, tool setter, coolant

Condition: good (used), functionality: fully functional, Year of construction: 2013, Sheet width: 3050 mm Sheet thickness: 10 mm Cutting angle: 1-4 ° Backgauge – adjustable: 10 - 1000 mm Number of hold-downs: 13 pcs Distance from lower blade to hold-down: 25 mm Hold-down diameter: 60 mm Oil volume: 240 l Max. strokes: 24 per min. Total power requirement: 15 kW Machine weight approx.: 6300 kg Space requirements approx.: 4100x3800x2000 mm Equipment: -Accessories: -Operating hours: 6,089 h -Angle gauge Crsdpsy H Imrofx Adxec -3 material support arms -NC control Elgo -Automatic cutting angle adjustment -Electric backgauge 1000 mm -Foot pedal -Light curtain behind the machine -Cutting line illumination

Condition: new, The KRM ST 30/5, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, steel, and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and hardened rollers, it provides reliable and precise results. The asymmetrical roll arrangement accommodates heavy plates, and its conical bending capabilities are enhanced by an adjustable rear roller. Moreover, it includes a user-friendly separate control panel with a foot switch for easy operation. Maintenance is simplified through central lubrication, ensuring long-lasting functionality. You can take advantage of the KRM ST 30/5 for your plate rolling needs; request a quote now and enhance your sheet metal processing capabilities. Codpfx Adoihvtgsxorc

Condition: used, Year of construction: 1981, chamfer lenght 1.250 mm Pressing force 300 kN stroke 100 mm Hydraulic Pressure 265 bar Stop time 140 ms machine weight ab. 2.500 kg Crjdpsy U N Itjfx Adxec In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: new, Year of construction: 2026, functionality: fully functional, KRAFT FB-15/20/25/30 Facing Lathe – Factory New · 1,500–3,000 mm Face Plate · CNC or Conventional BRAND NEW KRAFT FB SERIES FACING LATHE — FOR LARGE FACEPLATE WORKPIECES UP TO 2 TONS (OVERHUNG) The KRAFT FB Series is designed for cost-effective machining of large, flat components such as brake discs, flanges, wheels, bearing rings, or drum parts. Four models cover swing diameters from 1,500 to 3,000 mm and permit overhung workpiece weights up to 2 tons, ideal for single-part and medium batch production. Available as conventional or CNC models (Siemens, Fanuc, or Fagor), with or without tailstock, and with longitudinal or cross beds. KEY FEATURES Heavy-Duty Construction - Machine bed cast in one piece from MEHANITE, bed width 450 mm, heavily ribbed - Hardened and stress-relieved bed slideways - Ensures durable, highly precise machining without deformation High-Precision Main Spindle — G1 Accuracy Class - Induction hardened, spindle bore up to 230 mm (option) - Compact spindle housing, widely ribbed for stability Powerful Drive - Spindle motor 22 kW (29 kW option), up to 600 rpm, high torque - Infinitely variable spindle speed as standard CNC-Ready Ex Works - X/Z servomotors by Fanuc or Siemens - Ball screws X: Ø25 P5 C3, Z: Ø40 P10 C5 - Rapid traverse X/Z: 6/8 m/min Overhung Workpiece Machining — The Facing Lathe Advantage - Workpieces are clamped directly on the spindle head, no tailstock required - Optimized for flat, disc-shaped components with large diameters OPTIONS CNC Siemens/Fanuc/Fagor · Constant cutting speed · PARAT toolholder · C-axis & driven tools/milling unit · Tailstock · Spindle bore Ø 230 mm · 29 kW spindle motor MACHINE DATA — FOUR MODELS KRAFT FB-15 - Swing diameter/faceplate: 1,500 mm - Spindle speed: 4–600 rpm - Z travel: 1,000 mm - Servomotors X/Z: β12/3000i 1.8 kW / β22/3000i 3 kW - Weight: approx. 7,000 kg, Dimensions: 2200 × 2200 × 2500 mm KRAFT FB-20 - Swing diameter/faceplate: 2,000 mm - Spindle speed: 4–600 rpm - Z travel: 1,000 mm - Servomotors X/Z: β12/3000i 1.8 kW / β22/3000i 3 kW - Weight: approx. 7,500 kg, Dimensions: 2200 × 2600 × 2750 mm KRAFT FB-25 - Swing diameter/faceplate: 2,500 mm - Spindle speed: 4–400 rpm - Z travel: 1,500 mm - Servomotors X/Z: 1FL6067 2.0 kW / 1FL6092 3.5 kW - Weight: approx. 8,000 kg, Dimensions: 2500 × 3000 × 3100 mm KRAFT FB-30 - Swing diameter/faceplate: 3,000 mm Crodpfx Ajc Txdhedxjc - Spindle speed: 4–400 rpm - Z travel: 1,500 mm - Servomotors X/Z: 1FL6067 2.0 kW / 1FL6092 3.5 kW - Weight: approx. 10,000 kg, Dimensions: 3000 × 3200 × 3350 mm COMMON SPECS FOR ALL SIZES Turning length: 330 mm · Max. workpiece length: 450 mm · Bed width: 450 mm · Overhung workpiece weight: max. 3,000 kg · Cross slide width: 250 mm · X travel: 330 mm · Spindle bore: 155 mm (230 mm opt.) · Spindle nose: A2-11 (A2-15 opt.) · Spindle taper: MT7 · 4 spindle speed ranges · Spindle motor: 22 kW (29 kW opt.) · Rapid traverse (X/Z): 6/8 m/min · 4-position tool turret, tool shank 32 × 32 mm CUSTOMIZED TO YOUR REQUIREMENTS Tell us your specific application — workpiece range, required accuracy, preferred CNC system — and we will configure the FB Series to your needs. Attractive leasing and hire-purchase conditions through our partners. Delivery including installation, commissioning, and operator training available on request.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, tank capacity: 30 l, DGUV certified until: 07/2027, Fermentolevain Fermento High-tech fermenter Crjdpfx Adefhdlqoxoc Plant for the preparation and preservation of liquid sourdough with dual care system for the best aromas Control of the fermentation and conservation phase easy-touch control Mixing time and speed adjustable Stainless steel version Removable stirrer with overflow probe and alarm buzzer Outlet height 440 mm Tank capacity 100/125 kg Cooling output drops approx. 6 ° C per hour Connection 400V / 50Hz / 2.1kW, 16A-CEE plug Dimensions: 820 x 1050 x 1690 mm, WxDxH New machine with 12 months warranty Built-in scale Water connection with hand shower Cleaning cycle

Year of construction: 2014, condition: used, Manufacturer : Sweco Crsdpfx Adsy Ufiyexec Model : MX30S66+C Type: Vibrating sieve Grid diameter : Ø 30" ( ± 76 cm) Year : 2014 Number of separation levels available: 6 (3 installed on the sieve + 3 levels in stock with gaskets) Material : stainless steel Declogging system using balls Motor power : 0,37 KW Grids available: 20 units Dimensions: 100 x 81 x 68 cm Weight : ± 185 Kg. Video available in running condition

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 07/2027, working width: 300 mm, conveyor belt width: 320 mm, type of input current: three-phase, total width: 650 mm, total length: 650 mm, total height: 1,290 mm, Erka WMA 30, machine for wrapping crescent-shaped pastries Wrapping band width: 320 mm Suitable for all types of pastries, such as Kaiser rolls and pretzels Mobile crescent-shaped pastry wrapping machine Connection: 400V, 16A-CEE plug Used machine We have a wide selection of wrapping machines! Crodpfeytzxmex Adxec

Condition: excellent (used), Year of construction: 2011, ABB IRB260-30/1.5 only robot,20% discount at order more then 1 robot. DEVELOPMENT OF GSG ROBOTICS Crsdpoxq Tvqefx Adxoc GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: used, Pneumatic cylinder SAD-30/100. Cedpfxslkcg Hj Adxorc

Condition: used, empty load weight: 6,740 kg, maximum load weight: 23,260 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2019, next inspection (TÜV): 01/2027, suspension: air, tire size: 235/75 R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75 R17,5 ---/140J, rear tire size: 235/75 R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing rings, stake pockets, -- Printing errors, mistakes and changes reserved, sample images -- More data at: !, More details: ! Crsdjzacpmopfx Adxoc

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Codpfx Aezacl Iedxjrc

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 06/2028, type of input current: three-phase, machine/vehicle number: 2026, Fully automatic dough dividing and rounding machine, Bun press Model: Autobun 4-30 well-engineered technology ... already proven many times! easy operation of the 10 programs Stainless steel knife with 3 serving plates Partial range 40 to 120 grams / piece Division 30 parts Interchangeable cutter head Machine mobile DGUV V3 tested Connection 400V, 1.3 kW, 16A-CEE plug Dimensions: 600 x 700 x 1750 mm, WxDxH Cjdpfxog Hv Ako Adxerc Visit our large bakery machine park!

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 06/2027, type of input current: three-phase, machine/vehicle number: 2026, Cream cooker CM 30 Rational work in cooking and heating of creams and masses accurate temperature control digital timer Boiler filling 30 liters Mass 2 min - 19 max. Liter capacity stainless steel Machine mobile with lock DGUV V3 tested Crsdpfed Hihdsx Adxec Connection 400V, 3.75 kW, 16A-CEE plug Dimensions 650 x 610 x 1310 mm, WxDxH NEW machine with warranty

Year of construction: 2026, condition: new, functionality: fully functional, total length: 900 mm, total width: 1,550 mm, total height: 1,900 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 Crjdpsunh H Sefx Adxec - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: autofocus system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, mileage: 33,064 km, power: 96 kW (130.52 HP), first registration: 03/2021, fuel type: diesel, overall weight: 3,400 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,972 mm, total width: 2,032 mm, total height: 1,982 mm, loading space length: 2,411 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 1273. MU16465 ----EQUIPMENT * Conversion to refrigerated vehicle with WEBASTO AirTop 2000 STC refrigeration unit * Battery monitor [A540], programmable * LED lighting in the cargo area * Audio System 24: Ford audio system with Ford SYNC3 including AppLink, DAB/DAB+, navigation radio (FM/AM) 8" display (20.32 cm), 4 speakers, FordPass Connect Wi-Fi hotspot, integrated control panel and remote audio controls on the steering wheel, Ford SYNC 3 with touchscreen (hands-free system with voice command, SMS reading/sending function, Bluetooth, emergency call assistant, etc.), AppLink (advanced voice control, privacy mode, support for Android Auto and Apple CarPlay, capacitive touchscreen technology, etc.), dynamic navigation, lane guidance, road map for Western Europe * Seat Package 13 - Partition (with pass-through flap), with window (Custom Truck Trend) - Driver’s seat, 4-way adjustable (forward/backward, backrest, seat cushion tilt, height) - Dual passenger seat with storage compartment under individually folding seat cushions - Height adjustable headrests - Fold-out tray integrated in the dual passenger seat - Interior armrest for driver - Manual lumbar support (driver’s seat) - TREND seat covers: fabric - Partition (with pass-through flap), with window * Transmission: 6-speed manual * Anti-lock braking system with electronic brakeforce distribution (EBD) * Driver airbag * On-board computer with consumption and mileage information (e.g. range remaining) as well as outside temperature display * Roof, flat * Headliner in driver’s cab - up to partition to the cargo area * Double-wing rear door with 180° opening angle (without window) * Tachometer * Third brake light * Electronic safety and stability program (ESP) with traction control system (TCS) - Hill Start Assist - Side Wind Assist - Emergency Brake Assist - Rollover protection * Electric front windows with quick-down/-up function on driver's side * Ford Easy Fuel - comfort fuel cap and misfueling prevention * FordPass Connect incl. live traffic information and Wi-Fi hotspot; information on current vehicle status or location and control of selected vehicle functions via smartphone with FordPass app; real-time traffic information (in conjunction with Audio System 24 and 25); Wi-Fi hotspot (up to 4G/LTE, for up to 10 mobile devices); more information about FordPass Connect available at * Alternator, 240 A * Cruise control incl. leather steering wheel with adjustable speed limiter * Lockable glove compartment * Interior lighting with delay function and front reading lamps * Air conditioning in front incl. dust and pollen filter * Paint: solid * Cargo area lighting with selectable deactivation delay – after 30 minutes * Cargo floor: vinyl flooring, sealed, "Easy Clean" * Steering column adjustable in height and reach * Emergency brake assist incl. emergency brake light – pulsating brake lights during hard braking * Style color package – front and rear bumpers and exterior mirror caps painted in body color * Park Pilot System front and rear incl. fog lamps * Particulate filter: Diesel particulate filter Codpfx Ajxfx A Sjdxorc * Headlights: halogen projector headlights with LED daytime running lights and fog lights with static cornering light * Automatic entry lighting for sliding door upon door opening * Sliding door: sliding door, right side * Mud...

Condition: ready for operation (used), Gero F 100-200/12SO high temperature furnace 201101895 - 30 - 3000°C / Cable length green: 3.9 m, connection cable: 3.00 m, used, good condition, 100% functional, scope of delivery as per photos Credpfx Aex Erpnjdxoc

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 06/2027, working width: 300 mm, conveyor belt width: 300 mm, type of input current: three-phase, total width: 600 mm, total length: 700 mm, total height: 1,400 mm, Twisted bread wrapping machine, Universum HWM 30 TOP wrapping machine Universum Kasper, Model: HWM 30 Twisted bread wrapping machine, mobile for all types of breadsticks, such as pretzel sticks and lye breadsticks, etc. Universal wrapping machine for all types of dough suitable for wrapping Stainless steel design 300 mm belt width for best results robust technology Connection: 400V, 16A CEE plug Dimensions approx.: 600 x 700 x 1400 mm, WxDxH Used machine, overhauled with warranty Quality from a specialist company! Benefit from over 35 years of experience! Options: Conveyor belt EB Crjdpew U Ittsfx Adxec Delivery service Service package E-box for increased safety Maintenance contract Training and commissioning Visit our large bakery machine exhibition!

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 2026, warranty duration: 6 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 06/2027, working width: 320 mm, type of input current: three-phase, total width: 630 mm, total length: 710 mm, total height: 1,220 mm, Erka WML 30 Croissant Wrapping Machine Wrapping band width 320 mm Crjdpow Tqklofx Adxsc for all types of dough, such as croissant dough, pretzels, and lye sticks, etc. Universal combination wrapping machine for all types of dough for wrapping and long rolling Long rolling table, foldable simple, robust technology mobile croissant wrapping machine Connection: 400V, 16A-CEE plug Dimensions: 630 x 710/1110 x 1220/1300 mm (W x L x H) Used machine, refurbished with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Optional: Maintenance contract Feeder Spare parts box for added security Service package Delivery service Instruction and commissioning We have a large selection of croissant wrapping machines!

Condition: used, Year of construction: 1992, Internal item no.: 25086 Surface Grinding Machine Zirsch & Baltrusch Formmaster 6/30 + Magnetic clamping plate 600x300 mm Attention! The grinding spindle is noticeably louder and should probably be replaced in the near future. See video! Technical Data: Maximum grinding area: 650 x 300 mm Electromechanical cross feed: 300 mm Maximum table load: 300 kg Table clamping surface: 650 x 250 mm Maximum distance from table surface to spindle center: 600 mm Grinding wheel dimensions: 400 x 40 mm Travel X: 840 mm / Y: 310 mm Automatic infeed in Z Connected load: 8 kW Csdpfxoxtn R Io Adxsrc Installation dimensions (LxWxH): 3500 x 2000 x 2500 mm Weight: approx. 3000 kg

Condition: used, maximum load weight: 31,300 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 06/2026, loading space volume: 30 m³, Year of construction: 2024, Equipment: ABS, 3-axle LoF-SANH SCHWARTE-JANSKY "SLURRY TAXI" Stainless Steel (V2A) Slurry Tanker Semi-Trailer, 30,000 liters First registration VOGELSANG rotary lobe pump Type VA 186-260Q, max. capacity 6,000 liters/min, exchangeable pump housing liners Automatic pump cut-off, tank fill level easily adjustable by the driver Rinse line DN150, with 3 outlets (in front of each baffle and at the front wall) 2x baffle floors 3 domed covers, DN500 Suction funnel, 8" diameter, rear top mounted Stainless steel hose trays, left and right, approx. 6,000 mm long Swivel outlet at rear, 6" with Perrot coupling Product hose purge device All valves pneumatically operated including monitoring function Crodoy U A R Ujpfx Adxoc Valve control via RADIO REMOTE CONTROL Complete pipework made of V2A stainless steel SAF off-road axles with drum brakes 1st axle LIFT AXLE 3rd axle steering axle WABCO Trailer EBS with RSS stability program Tires: 6x 560/60 R 22.5 Curb weight (ready to drive): approx. 7,700 kg Fifth-wheel height: approx. 1,350 mm JOST crank landing legs Stainless steel toolbox left, 500 x 600 x 500 mm 4x LED work lights RENTING is the new BUYING – also available immediately in full-service rental from us-----