Used Ciata E-230 Tig Pulse for sale (73,213)

Condition: new, empty load weight: 129 kg, maximum load weight: 620 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, tire size: 155/70 R13, color: grey, Year of construction: 2024, Anhänger 230x125 Garden Trailer 230 KIPP Unitrailer 750 kg mit Stützrad und zusätzlichen Bordwänden. Die Höhe der BIS-Bordwände beträgt 40 cm. Modell Garden Trailer 230 Kipp Ersatzrad mit Halterung optional Wo befinden sich die Räder außerhalb des Laderaums Codpfx Abeuk Ii Eewogr Art der Aufhängung ungebremste Achse bis 750 kg Anzahl der Achse 1 Bordwände Stahl Gebremst nein Art der Ladefläche aus Siebdruckbodenplatte Verwendung Umzüge, innerbetrieblicher Warentransport Die Transportfläche von 230 cm x 125 cm bietet viel Platz für Ihre Waren. Außerdem kann unser PKW-Anhänger dank kippbarer Deichsel eingesetzt werden. Dies ermöglicht ein viel bequemeres Be- und Entladen von Waren, die Sie normalerweise anheben oder ablegen müssten. Es ist die Möglichkeit, den Anhänger senkrecht mit eingeklappter Deichsel zu halten, die auf hinterer Bordwand steht. Sie werden es sogar auf die Fassade des Gebäudes oder überall setzen! Der Garden Trailer 230 KIPP ist aus verzinktem Stahl hergestellt und somit rost- und witterungsbeständig. Die Verstärkung für die gesamte Struktur sind zwei unter der Bodenplatte montierte Stützbalken, die die die Ladefläche stützen. FAHRWERK - Lenkachse von den Herstellern Knott oder AL-KO. Kippbare V-Deichsel, die jederzeit unter der Bodenplatte des Anhängers eingeklappt werden kann. BORDWÄNDE - alle Bordwände wurden aus verzinktem Stahl hergestellt. Hintere Bordwand aufklappb. Wir bereiten für Sie die notwendigen Dokumente vor, die Sie für die sofortige Registrierung benötigen, d.h.. Rechnung, EG-Übereinstimmungsbescheinigung, Fahrzeugbrief, Gewährleistungsbuch (2 Jahre Garantie) und unser Zertifikat. Nachdem Sie den Anhänger erhalten haben, müssen Sie ihn nur zulassen und versichern, um ihn vollständig nutzen zu können.

Condition: new, empty load weight: 144 kg, maximum load weight: 606 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 700 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Wide trailer with support wheel and lattice walls Garden Trailer 230 KIPP A wide trailer with jockey wheel from the KIPP Garden Trailer 230 series, dimensions 230 x 125 cm. The KIPP Garden Trailer 230 model is 19 cm wider than the KIPP Garden Trailer 200 model. The set includes: a support wheel, lattice sides and a flat gray tarpaulin. Sturdy support wheel from renowned German manufacturers. Galvanized steel grid sides, resistant to rust. With a flat gray tarpaulin, they create an excellent transport surface for transporting goods that require a dry and wide space during transport. An additional advantage of a wide trailer with a support wheel is the possibility of tilting it and folding the drawbar, which allows us to park the trailer vertically on the back and quickly unload loose goods. If you decide to purchase our new trailer, you will receive a 2-year warranty, thanks to which you can use it without fear of damage. We provide each product with a user manual and a warranty booklet. All important documents are delivered to you together with the purchased trailer. In addition, you can purchase additional equipment such as BIS side panels, tarpaulins with the H-800 frame or an anti-theft device and an aluminum cover at any time. If you have any questions or doubts while using the trailer, you can contact our specialists at any time. They will be happy to provide all the information and explain everything. In addition, our wide trailer with support wheel and lattice drop sides can be tilted thanks to an inclinable drawbar. This makes it much easier to load and unload goods that you would normally have to lift or drop. This solution is also most commonly found in significantly more expensive caravans, which significantly improves the user experience. Another advantage of this solution is the ability to store the trailer in a vertical position with the drawbar folded in at the rear. So you don't have to worry about the trailer taking up a lot of space in the garage or not fitting in because of the protruding drawbar. You can even place it based on the front of the building or wherever you want! Cgodpst Id Tbsfx Abwjr

Condition: new, empty load weight: 159 kg, maximum load weight: 591 kg, overall weight: 750 kg, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 1,500 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Driving license B trailer UNITRAILER Garden Trailer 230 KIPP [with support wheel, additional drop sides, high tarpaulin and high bows] Cgjdpjt Id Avjfx Abwor Transport trailer UNITRAILER Garden Trailer 230 KIPP is the latest product from UNITRAILER. It is currently our largest car trailer with a maximum permissible weight of up to 750 kg. The trailer has a folding tailgate, which enables loading and unloading in just a few minutes. Thanks to the tiltable drawbar, it can be placed vertically on the rear wall. We will take care of all the formalities associated with the purchase for you. The trailer will be delivered to the address you specify within 8 working days together with the registration documents. Once you have received the trailer, you only need to register and insure it to be able to use it in full. In addition, our car trailer can be used thanks to its tiltable drawbar. This makes it much easier to load and unload goods that you would normally have to lift or put down. This solution is also most often found in much more expensive trailers, which significantly affects the better feeling of using them. Another advantage of this solution is the ability to hold the trailer vertically with the drawbar folded in and resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in the garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or anywhere!

Condition: new, empty load weight: 129 kg, maximum load weight: 621 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 700 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Garden Trailer 230 KIPP trailer with additional drop sides, support wheel and flat tarpaulin The Garden Trailer 230 KIPP car trailer from UNITRAILER with a GVW of up to 750 kg has a hinged rear dropside so that loading and unloading is possible in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you. The ordered goods with enclosed documentation will be delivered to the address you specify in Germany/Austria within 7 to 9 working days. After receiving the car trailer, you only need to register it Advantages of a Garden Trailer 230 KIPP car trailer If you decide to purchase our new car trailer, you will receive a 2-year warranty. Each product comes with a user manual and a warranty booklet. All the most important documents come with the purchased trailer. In addition, you can purchase accessories in the form of drop sides, support wheels or anti-theft protection at any time. If you have any questions or doubts while using the car trailer, you can contact our specialists at any time. You can also use the tiltable drawbar to tilt your car trailer. This makes loading and unloading goods that you would normally have to lift or lower much more convenient. This solution is also most commonly found on more expensive car trailers, which contributes significantly to a better user experience. Another advantage of this solution is that the car trailer can be stored vertically, with the folded drawbar resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in your garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or wherever you want! Cgodpfx Aot Id Ifebwjr

Condition: new, empty load weight: 142 kg, maximum load weight: 608 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 700 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Garden Trailer 230 KIPP car trailer with leaf grid attachment, support wheel, flat tarpaulin and tarpaulin supports Csdpet Id Ryefx Abwjgr The Garden Trailer 230 KIPP car trailer from UNITRAILER with a GVW of up to 750 kg has a hinged rear dropside so that loading and unloading is possible in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you. The ordered goods with enclosed documentation will be delivered to the address you specify in Germany/Austria within 3 to 5 working days. Once you have received the car trailer, all you have to do is register it. Advantages of a Garden Trailer 230 KIPP car trailer If you decide to purchase our new car trailer, you will receive a 2-year warranty. Each product comes with a user manual and a warranty booklet. All the most important documents come with the purchased trailer. In addition, you can purchase accessories in the form of drop sides, support wheels or anti-theft protection at any time. If you have any questions or doubts while using the car trailer, you can contact our specialists at any time. You can also use the tiltable drawbar to tilt your car trailer. This makes loading and unloading goods that you would normally have to lift or lower much more convenient. This solution is also most commonly found on more expensive car trailers, which contributes significantly to a better user experience. Another advantage of this solution is that the car trailer can be stored vertically, with the folded drawbar resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in your garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or wherever you want! The Garden Trailer 230 KIPP car trailer is made of galvanized steel and is therefore rust and weatherproof. If you only store your car trailer outdoors, we recommend that you purchase a flat cover to protect your trailer. The entire structure is reinforced by two support beams fitted under the floor to support the loading area. The tiltable drawbar allows free tilting, making loading and unloading very easy and extremely time-saving. To meet the expectations of our customers, we offer this trailer model with a tilting drawbar at an exceptional price. Thanks to this, you can safely transport building materials, furniture or special equipment. You can remove the rear dropside at any time by pulling it off the brackets and gain much more space in a matter of seconds. From now on, you can transport many more things at once.

Condition: new, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 1,500 mm, loading space volume: 0.8 m³, tire size: 13, wheelbase: 155 mm, Year of construction: 2024, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK AND THE NETHERLANDS. UT004189 Transport trailer UNITRAILER Garden Trailer 230 KIPP is the latest product from UNITRAILER. It is currently our largest car trailer with GVW up to 750 kg. The trailer has a folding tailgate, which enables loading and unloading in just a few minutes. By using a tiltable drawbar, it can be placed vertically on the rear wall. We will take care of all the formalities associated with the purchase for you. When ordering a car trailer, please state the GVW of the vehicle that is to tow the trailer. You will find the details of the permissible gross weight on the last page under the vehicle registration document. Technical data of the Garden Trailer 230 KIPP car trailer WHEELBOX - Steering axle from the manufacturers Knott or AL-KO - Special order on request Unitrailer. Wheel size: 155/70 R13. Tiltable V-drawbar, which can be folded under the base plate of the trailer at any time. CONSTRUCTION - Support frame made of hot-dip galvanized sheet steel. Curved profiles with bolts are used. Loading area: anti-slip and water-glued screen-printed floor panel, 9 mm thick. SIDE WALLS - all side walls are made of galvanized steel. Hinged rear dropside Cgodpfsir H R Eex Abwor Delivery costs are charged additionally.

Condition: new, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 777 mm, loading space volume: 3.6 m³, tire size: 13, wheelbase: 155 mm, color: silver, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK AND THE NETHERLANDS. UT004191 The Garden Trailer 230 KIPP car trailer from UNITRAILER with a GVW of up to 750 kg has a hinged rear dropside so that loading and unloading is possible in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you when ordering a car trailer, please state the GVW of the vehicle with which you are towing the trailer. Technical data of the Garden Trailer 230 KIPP car trailer WHEEL - Steering axle from the manufacturers Knott or AL-KO Wheel size: 155/70 R13 Tiltable V-drawbar, which can be folded under the base plate of the trailer at any time CONSTRUCTION - Support frame made of hot-dip galvanized sheet steel Cgedpfx Abeir H R Tjwsr Curved profiles with bolts were used Loading area: anti-slip and water-resistant screen-printed floor panel, 9 mm thick SIDE WALLS - all side walls are made of galvanized steel. Total height of the drop sides: 70 cm Delivery costs will be charged additionally.

Condition: new, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 1,100 mm, tire size: 13, wheelbase: 155 mm, Year of construction: 2024, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK AND THE NETHERLANDS. UT004188 Cjdpfx Aeir H R Nobwogr Transport trailer UNITRAILER Garden Trailer 230 KIPP is the latest product from UNITRAILER. It is currently our largest car trailer with GVW up to 750 kg. The trailer has a folding tailgate, which enables loading and unloading in just a few minutes. By using a tiltable drawbar, it can be placed vertically on the rear wall. We will take care of all the formalities associated with the purchase for you. When ordering a car trailer, please state the GVW of the vehicle that is to tow the trailer. You will find the details of the permissible gross weight on the last page under the vehicle registration document. Technical data of the Garden Trailer 230 KIPP car trailer WHEELBOX - Steering axle from the manufacturers Knott or AL-KO - Special order on request Unitrailer. Wheel size: 155/70 R13. Tiltable V-drawbar, which can be folded under the base plate of the trailer at any time. CONSTRUCTION - Support frame made of hot-dip galvanized sheet steel. Curved profiles with bolts are used. Loading area: anti-slip and water-glued screen-printed floor panel, 9 mm thick. SIDE WALLS - all side walls are made of galvanized steel. Hinged rear dropside Delivery costs are charged additionally.

Condition: new, Year of construction: 2026, functionality: fully functional, A multihead weigher is a highly precise weighing system that simultaneously weighs products on multiple load cells. The ideal combination is calculated automatically, ensuring the target weight is reached with minimal deviation. Multihead weighers are especially suitable for free-flowing products. When combined with a vertical packaging machine, they provide a continuous, automated packaging process. Cgodpfxow Ekh Nj Abwjr Multihead weighers reduce product loss through exact weight combinations and enable higher cycle rates, particularly for expensive or delicate products. Features - 10 to 36 heads available - Automatic frequency adjustment of vibration for uniform and precise product distribution - Automatic zero adjustment during operation for improved accuracy - Self-diagnostic alarm via popup window for easy troubleshooting - Option to select single or multiple drops for higher weights - Software-controlled side discharge for non-conforming weights, minimizing film and product waste - Live display of individual amplitudes for precise monitoring and control of each vibrator - Live display of individual weighing results - Centralized load cell feeding control replaces photoelectric sensor - Forced discharge function for frozen products to prevent melting when not selected - Weighing cells supplied by HBM - Program memory for parameter settings - Weigher available as a waterproof system at additional cost Technical Data - Max. speed: 60 weighings per minute (wpm) - Weight: 430 kg - Weighing range: 10–5,000 g - Accuracy: +/- 1.0–1.5 g - Hopper capacity: 1.3L, 2.5L, 4L & 5L - Control panel: 7'' touchscreen - Drive system: stepper motor - Level control: load cell - Surface: optionally stainless steel, surface-treated, or Teflon (other finishes on request) - Material: Stainless steel 304 - Connection: 220V / 50Hz

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Cgjdpfx Ajd Tbbdjbwor Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. Cedpefdkb Tsfx Abwsgr We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction Csdpfx Abjh R Taqewjgr (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. Cedpfemhhypsx Abwegr The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Csdpomhh Dhjfx Abwsgr The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Cgedpfemhh Dzox Abwor Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. Cgedpfxsmhhx Ie Abwsr The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Cgsdjmhhyajpfx Abwsr We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. Cedpfsd Tqalex Abwsgr According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) Cedpfx Absh Ek Daowjgr - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Csdpfx Abomhh Anewsgr - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm Cgodpfx Absfdkb Uewjr 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Cgedpfxeguk A Hj Abwer Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm Cgedsfdkbhopfx Abwor 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm Cgsdpjguk Dksfx Abwjr 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg Csdpfx Abjmhhf Sowogr - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.