Used Akerman H5 M for sale (70,781)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Dodpfx Aszqunhegtjwb Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: ready for operation (used), Year of construction: 1989, Available immediately from location: MAHO Toolroom Milling Machine Type MH 500 M Year of manufacture 1989 Heidenhain Digital Display Table 800 x 360 mm SK 40 Spindle speeds 63 – 4000 rpm Quill stroke 50 mm Travel X/Y/Z 500/380/350 mm Drive 3 kW Dwedpfezwud Nox Agtob Feed rates 10 – 1000 mm/min Coolant system Weight 1600 kg Adapters Hydraulic vise Price: €3,000 plus VAT, ex location

Condition: excellent (used), Year of construction: 2017, operating hours: 8,060 h, functionality: fully functional, total length: 3,051 mm, total height: 1,548 mm, total width: 1,635 mm, type of input current: three-phase, product height (max.): 120 mm, product height (min.): 20 mm, product length (min.): 100 mm, product length (max.): 550 mm, product width (max.): 380 mm, product width (min.): 30 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 22 A, width of welding knife: 450 mm, length of welding knife: 580 mm, overall weight: 1,000 kg, power: 12.9 kW (17.54 HP), input frequency: 50 Hz, air demand: 13.8 m³/h, We are offering this very well-maintained Robopac COMBITECH 5845 AVH shrink wrapping machine and shrink tunnel, manufactured in 2017. Model: COMBITECH 5845 AVH Serial number: 30153878 Djdpfjztwg Esx Agtewb Year of manufacture: 2017 Mileage: 8060 Sealing bar dimensions WxH: 580 mm x 450 mm Supply voltage: 400 V Product dimensions min. WxDxH: 100 mm x 30 mm x 20 mm Product dimensions max. WxDxH: 550 mm x 380 mm x 120 mm Conveyor belt speed: 5 - 40 m/min Film thickness: Polyolefin 9 - 35 µm, Polyethylene 25 - 50 µm Frequency: 50/60 Hz Number of phases: 3 Current consumption: 22.0 A Total power: 12.9 kW Air consumption: 230.0 Nl/min Maximum pressure: 6.0 bar Weight: 1,000.0 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2019, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 150 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 18 m/min, actuation type: electric, total height: 1,468 mm, total length: 4,412 mm, total width: 1,511 mm, Very well-maintained and regularly serviced. TECHNICAL DETAILS Workpiece height: max. 60 mm Workpiece width: max. 60 mm Workpiece length: max. 150 mm Edge thickness: max. 3 mm Processable edge materials: ABS, PVC, veneer strip, solid edge strips Feed and Operation Feed rate X-axis: 18 m/min Height adjustment: mechanical Type of operation: electric MACHINE DETAILS Data recorded as of March 20, 2026 Main switch – total operating time: 9,720 h 57 min 06 s Chain drive – total operating time: 1,216 h 19 min 51 s Total number of workpieces: 91,356 pieces Total workpiece length: 63,904.7 m Overall height: 1,468 mm Overall length: 4,412 mm Overall width: 1,511 mm EQUIPMENT - Smartouch touchscreen control - Program settings with memory function Dwsdpfxszv Rcrj Agtsb - Release agent - Pre-milling unit - Radius cutter, top and bottom - Corner rounding unit - Radius trimming unit - Flat trimming unit - Adhesive remover - Polishing unit - Automatic feed

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Total power consumption: 33 kW Dwsdpfx Agszvnfwetob Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, operating hours: 25,350 h, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 750 mm, number of slots in tool magazine: 120, number of spindles: 1, spindle nose: BT50, spindle speed (max.): 6,000 rpm, Equipment: chip conveyor, Tool breakage option included 7-pallet carousel NC FANUC MF-M6 Dwodpfxetqfk Nj Agtsb

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, Milling machine Maho MH 500 E2 with Phillips CNC 432 control system. Fixed table, SK 40 spindle mount with hydraulic clamping. 16-position vertical tool changer. The machine has been standing idle for some time and has not been tested. It is being sold as defective. Dodozvbkmjpfx Agtowb

Condition: excellent (used), Year of construction: 1990, MAHO MH 500W with Heidenhain TNC 320 The machine comes from a training workshop and is in very good condition. The TNC 320 offers intuitive and highly flexible operation and programming according to current industry standards. Technical specifications: - Heidenhain TNC 320 retrofit - Travel X- 500 mm, Y- 380 mm, Z- 350 mm - Spindle taper SK 40 - Vertical quill stroke 50 mm - Spindle speeds 20–3150 rpm, stepless - Feed rate 1–3000 mm/min - Rapid traverse 5 m/min - Table load capacity 250 kg - Total power requirement 11.3 kW - Machine weight approx. 2 t - Handheld control unit - Safety guard An on-site inspection/test under power is, of course, possible. We are happy to offer transport, installation, and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH, are a company specialized in: - Service - Maintenance - Overhaul - Automation of DMG machines and equipment from other renowned manufacturers. Dwsdpfx Ajxw N S Isgteb We support you throughout the entire process! From machine purchase, transport, and delivery, up to commissioning and subsequent maintenance or repair work – you can rely on us.

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, Milling machine Maho MH 500 W with Heidenhain 232 control system. Fixed table, SK 40 spindle mount with hydraulic collet chuck. The machine has been idle for some time and is sold as is, without testing. Dwedjzvblkjpfx Agteb

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Yaskawa Motoman MH50 DX100 robot, complete Controller: DX100 Max. payload: 50 kg Max. working range: approx. 2061 mm Serial number: S0M332-1-3 Scope of delivery: Robot, controller, cables, teach pendant, operating manual, circuit diagrams Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on-site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Dwsdpjzlyl Uefx Agtob Shipping costs to foreign countries upon request – please specify country, city, and postal code. Freight costs upon request – please specify the delivery address.

Year of construction: 2022, condition: used, functionality: fully functional, This is a hood-type dishwasher from the manufacturer Meiko, model Upster H500 M2, manufactured in 2022, including feed/discharge tables, spray arm, and mobile water softener. The machine has undergone a major inspection in our in-house workshop and is therefore fully functional and free of defects. It comes with a 6-month warranty on all electrical components. The hood-type dishwasher has only 5388 operating hours and 9648 wash cycles and was used in a small company canteen that has since closed. You will receive an invoice with VAT shown. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional. Flexible shipping or self-collection options. Competent advice – before and after the purchase. Provision of operating manuals, connection diagrams and spare parts. Inspection according to DGUV V3. Technical data: W x D x H: 635(687) x 750(850) x 1470 mm, feed/discharge table dimensions: 1200 x 700 mm Basket size: 500 x 500 mm Passage height: 440 mm Program run time: 90 / 150 / 210 s Basket capacity: 40 / 24 / 17 baskets/h (theoretical) Tank capacity: 22.0 L Rinse water quantity: 2.6 L/wash cycle Total connection value: 10.6 kW Fuse rating: 20A On-site boiler heating: 7.50 kW / 10.82 A Tank heating: 2.00 kW / 8.70 A Wash pump: 0.75 kW / 4.60 A Degree of protection of the machine: IP X4 Condition: Used, inspected and fully functional. Your advantages: Simplest operation thanks to clear and easy-to-understand symbols Digital temperature displays for wash and rinse water 3 program run times Eco-filter system for best cleaning results through warmer and filtered tank water Machine and hood double-walled – ideal heat and noise insulation Hood open at the rear – prevents steam from bothering the operator Temperature-dependent extension of wash time – hygiene safety under all operating conditions Wash and rinse systems made of stainless steel Hood start automatic Including lye pump, pressure booster pump, as well as rinse aid and detergent dosing devices, basket equipment Optional: with built-in water softener EW 10 Standard equipment: Liquid detergent dosing device with suction lance for on-site storage containers Rinse aid dosing device with suction lance for on-site storage containers Connection set Lye filter system AktivPlus Pressure booster pump Basket basic equipment: 1 universal basket VKV 50/1 Additional equipment: Original Meiko feed/discharge tables Including spray arm Including mobile water softener Shipping: Delivery or self-collection by arrangement Dodpfx Aezzlntogtewb Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors Do you have any questions, would you like to request advice or would you like to see something on site? You can reach us during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively according to our general terms and conditions (GTC).

Condition: good (used), Year of construction: 1982, machine/vehicle number: 1501-2, Offer 26128 Technical Data: Dsdpey Ec Emefx Agtewb - Max. load capacity in horizontal position: 5000 kg - Faceplate diameter: 1150 mm - Faceplate motorized tilting: 0 - 130° - Rotary movement electronically steplessly adjustable - Right and left rotation - Welding current transmission: approx. 500 A - Drive: 400 V - Table height in horizontal position: approx. 1220 mm - Handheld remote control - Required space: approx. W 1350 x H 1220 x D 1900 mm - Weight: approx. 3500 kg - Adapter plate with clamping device for round material

Condition: used, Year of construction: 1975, Technical details: x-travel: 300 mm y-travel: 175 mm z-travel: 350 mm quill stroke vertical: 60 mm revolution per minute: vert.+ horiz.: 40 - 2000 / 18 step U/min feeds:: 12,5 - 500 / 18 step mm/min. tool taper: SK 40 distance spindle nose and table: min./max.: 50 /400 mm distance spindle center to column: min./ax.: 170 / 345 mm table surface area: 670 x 285 mm Dsdpfsvc Avuox Agtswb total power requirement: 1,5 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,05 x 1,6 m Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display Heidenhain Coolant system *

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, We offer a Günther injector for meat, fish, and cheese, type PIH57M from 2017 – a compact, automatic machine for injecting brine and marinade with a capacity of 30 l/min. The device has been designed for the processing of meat, poultry, fish, and cheese, where even distribution of brine, improvement of taste and color, and increased yield of the finished product are important. The PIH series is specially designed for the requirements of poultry and fish injection, with a high needle density for the best possible distribution of brine in the product. The Günther PIH57M injector operates at 400 V, 1.6 A, 50 Hz, requires 6 bar compressed air and provides a capacity of up to 30 l/min with an installed power of 2 kW. The set includes a brine filter, documentation and spare parts, which facilitates quick implementation of the machine into production and subsequent servicing. Technical data: Manufacturer: Günther Maschinenbau GmbH Type/model: PIH57M Year of manufacture: 2017 Application: injection of meat, poultry, fish, cheese Power supply: 400 V, 50 Hz Current: 1.6 A Operating pressure: 6 bar Capacity: up to 2000 kg/h Number of needles: 57 Needle diameter: 3 mm Maximum product height: 150 mm Working width: 280 mm Power: 2 kW Equipment: filter, documentation, spare parts Dwedpfx Aoyibhqjgtob Machine dimensions: L: 1800 x W: 800 x H: 2500 mm Their outstanding features are: Rugged construction Compact design High injection accuracy Easy operation Easy to maintain High flexibility Easy to clean

Condition: good (used), functionality: fully functional, machine/vehicle number: K005A02146X, Year of construction: 2000, operating hours: 7,920 h, load capacity: 5,000 kg, lifting height: 4,600 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,200 mm, fork length: 2,400 mm, overall weight: 7,880 kg, total height: 3,200 mm, total length: 6,000 mm, total width: 1,520 mm, Equipment: UVV, sideshift, Hyster H5.00XM LPG Forklift Year of manufacture: 2000 Operating hours: 7,920 h Lift height: 4,600 mm to top of forks Overall height: 3,200 mm Load capacity: 4,410 kg effective with fork positioner and sideshift Overall dimensions approx.: 1,520 mm wide; approx. 3,600 mm long without forks Fork length: 2,400 mm - Fork positioner adjustable from approx. 460 mm to 1,350 mm overall width - Bracket for 2 gas cylinders with changeover valve - Sideshift - Power steering The machine is in perfect working order and ready for immediate use. Dwsdpfoyi Eyajx Agteb Affordable delivery by professional service provider possible. Have a look at our other ads as well. We always have a large selection of high and low lift trucks and forklifts in stock. Do you need spare parts for your forklift, pedestrian stacker, etc.? Just contact us. Didn’t find the right unit? Simply send us an email with your requirements and we will check if we have the right machine for you.

Condition: used, Year of construction: 1984, functionality: fully functional, Technical Data: Working Area X axis: 500 mm Y axis: 400 mm Z axis: 300 mm Working Spindle with rotary table Tool holder: ISO 40 Automatic feeds: 0.2 - 0.6 - 0.12 mm/min Spindle speeds: 20 - 4000 rpm, directly programmable Feed range: X / Y / Z = 1 - 3000 mm/min Fixed table: 700 x 350 mm, 5 T-slots Fixed table: max. load 250 kg Connection: 400 V Weight, approx.: 1900 kg Machine dimensions, approx.: 2400 x 1850 x 1850 mm Space requirement: 3200 x 4100 mm, height 1920 mm Equipment: - CNC control - Fixed table - Milling head swivels +/- 90° - Hydraulic clamping device - Coolant system - Emergency stop push button Dedpfsyzy Azex Agtewb

Condition: used, Year of construction: 1975, Technical details: x-travel: 300 mm y-travel: 350 mm z-travel: 350 mm quill stroke vertical: 60 revolution per minute: 40 - 2000 U/min feed:: 12,5 - 500 / 18 step mm/min. tool taper: SK 40 headstock adjustment: schwenkbar 90° rechts/links mm headstock adjustment: Y-Weg: 175 mm table surface area: 600 x 285 mm distance spindle nose and table: min./max.: 50 / 400 mm distance spindle center to column: min./max.: 170 7 345 mm total power requirement: 1,6 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,1 x 1,7 m Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display Heidenhain Coolant system Dwodpfxou T Navs Agtob *

Condition: used, Compressor DWM Copeland -Type: D8DH5-500X-AWM/D -Volume: 151 m3/h -Cooling capacity: 103.4 kW at -5°C/40°C, 85.3 kW at -10°C/40°C, 44.5 kW at -25°C/40°C Dodpfxjzxzlpe Agtewb -Refrigerant: R404A -Quantity in stock: 1 -Reference number: S 254 -Condition: Used in very good condition, ready to work

Condition: excellent (used), Angel Victory 1350H500V/220 Combi Closing 220 tons year 2004 Clamping plan WxH 960x830 Scrow 55mm+40 mm 618 cm3+251 EC100/A03 Minmal mold height 320mm Dwjdpfxspa Rhbo Agtjb Maximum 730mm

Condition: excellent (used), Year of construction: 2012, Year of manufacture: 2012 Dodpfx Agjyu Icnotowb Reach: 706 mm Load capacity: 5 kg

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a compact, high-performance heavy-duty racking system for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load of 2,000 kg per level and a bay load of 6,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. The offered pallet racking system has a total of 432 pallet spaces, including ground-level spaces. At a total price of €9,870.00 net, this corresponds to a price of only €22.85 net per pallet space. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 100.00 m - Shelf load: 2,000 kg per level - Bay load: 6,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 520 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: ground level + 3 beam levels - Pallet spaces: 432, including ground-level spaces - Price per pallet space: €22.85 net - Condition: Used, Jungheinrich MPB SCOPE OF DELIVERY: - 28 × Uprights, approx. 520 × 110 cm, pre-assembled - 162 × Beams, approx. 360 × 12 × 5 cm - 324 × Safety pins PRICE: €9,870.00 net €11,745.30 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams, optional - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice regarding your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking systems, shelving systems, and other solutions on-site. Many systems are set up and can be experienced directly. Our technical consultants are available to answer your questions and provide individual advice – we look forward to your visit! Dwodpfx Agjzy Hz Setjb HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many more offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a compact, high-performance heavy-duty racking system for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load of 2,000 kg per level and a bay load of 6,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. The pallet racking system offered has a total of 272 pallet spaces, including floor spaces. At a total price of €6,270.00 net, this corresponds to a price of only €23.05 net per pallet space. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 63.00 m - Shelf load: 2,000 kg per level Dwjdpfx Agozy Hzlotsb - Bay load: 6,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 520 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: Floor + 3 beam levels - Pallet spaces: 272, including floor spaces - Price per pallet space: €23.05 net - Condition: Used, Jungheinrich MPB SCOPE OF DELIVERY: - 18 × Uprights, approx. 520 × 110 cm, pre-assembled - 102 × Beams, approx. 360 × 12 × 5 cm - 204 × Locking pins PRICE: €6,168.00 net €7,339.92 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery via our partner shipping company – freight costs depend on the postal code - Professional installation and dismantling by trained teams, optionally available - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will be happy to create a non-binding offer for you – tailored to your specific requirements. Whether for a new build, renovation, or expansion – we will provide you with competent advice on your racking configuration. SHOWROOM: Feel free to visit us in our showroom! On-site, you can get a comprehensive picture of our pallet racking systems, storage racking, and other solutions. Many systems are set up and can be experienced directly. Our specialist consultants will be happy to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND THE RIGHT SOLUTION YET? Visit our website. Here you will find a quick overview of many more offers and versions. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us by message or phone. You will find our telephone number on our company website. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: used, Year of construction: 2017, Used Yaskawa industrial robot, model MH-50-35, in good condition, with DX100 controller. Dwsdpszia Hgefx Agtob

Condition: used, Year of construction: 2019, Used Yaskawa industrial robot MH-50 in good condition, including DX100 controller. Dedpfxoziaz Ds Agtewb

Condition: good (used), Year of construction: 1990, CNC universal milling machine MAHO Type: MH 500 W Control MAHO 432 Spindle holder : ISO 40 Spindle speed : 20 - 4000 rpm Travels : X 500 mm Y380 mm Z350 mm Table load capacity : 250 kg Machine in good condition from tool shop. Dwjdpfx Ajr Igv Rsgtjb Machine dimensions : Width 1500 mm Depth 2000 mm Height 1800 mm Weight .2100 Kg . Machine documentation available, machine can be demonstrated under power.