Used Ajce Ab-200M for sale (88,336)

Condition: new, Year of construction: 2025, The Randek cut-out saw JS400C is designed to make cut-outs at the end of pieces of wood, for example, for inserting a belt beam in vertically standing handles. The machine fixes the wood pneumatically and makes two cuts with the two 400mm diameter saw blades. The maximum length is 380mm and the depth of cut can be adjusted to a maximum of 115mm. The saw can be operated quickly and easily by means of a foot pedal. Bwslq Sjd Arwhod Ryjl Functional description The wood to be notched, e.g. a handle, is pushed into the covered saw slot up to the set stop. and. The protruding end is placed on a roller block (not included). A foot pedal is used to pneumatically fix the inserted wood and trigger the sawing process. Technical description - Notching depth: 30 - 115 mm - Notching length: 10 - 380 mm - Wood thickness: 30 - 70 mm - Electrical connection: 3 x400 V, 50 Hz, 25 A - Compressed air: 0,5 - 0,8 MPa (5 - 8 bar) - Saw blades: HM 400/30-3,5/2,5/40 Safety The saw is well sealed against tampering by means of a cover plate. When the cover is opened, the electric current is automatically cut off, which minimizes the risk of injury. Advantages - Makes notching/cutting effective and precise - Flexible and easy to set up - Easy to operate - The set working height and the possibility to operate the machine by foot pedal makes the working conditions easy.

Year of construction: 2007, Condition: good (used), Functionality: fully functional, Paint drying chamber MEYER AB / Fanmet OY 17m3 Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland was used for drying lacquered furniture parts. Feeding with tray trolleys Length 3600mm width 2150mm height 2200mm approx. 17m3 electric heating Beljtt Sy Rjq Sd Ryowl total power 30 kw 18 heating units, each with 1667W, 400 V (length 2360mm) Air flow: 3m3 /sec or 10,000m3 /hour Inner cladding galvanized sheet steel 2 VEM fan motors ( 3,6kW+0,37kW ) ATEX Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

Condition: used, Year of construction: 1962, Functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Bwslq Sd Reuprqwjyjl Used, functional condition

Condition: excellent (used), Year of construction: 2016, operating hours: 46,000 h, Functionality: fully functional, machine/vehicle number: Vers. B02, fuel type: gas, power: 1,494 kW (2,031.27 HP), Currently in operation, until June 2025 (expected operating hours at that date approximately 54,000). Last serviced at 30,000 operating hours of operation. Bwslq Sorhidbed Rysl The CHP plant was originally installed in 2006, initially housing a higher-powered engine, which was replaced in 2016 with the current engine (which was new). In addition to replacing the motor, the following activities were carried out: - new 690 V transformer; - internal cleaning of the SIAT heat exchanger (1357 kW); - internal piping modifications in relation to the new plant configuration; - replacement of general control panel and upgrade new software for supervisor "DIA.NE", version XT3; Regularly maintained and covered by supplier's preventive and corrective service contract. Smoke treatment and emission purification plant is also included.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 800 h, Functionality: fully functional, machine/vehicle number: 310712, overall weight: 9,000 kg, load capacity: 8,000 kg, input voltage: 400 V, type of input current: three-phase, warranty duration: 3 months, Equipment: documentation/manual, stove, Large incandescent stove sold with trolley. Manufactured by Electro Heat Sweden AB. Bwelq Sdeulu Nuj Ryol

Condition: excellent (used), Functionality: fully functional, Year of construction: 2007, operating hours: 7,232 h, machine/vehicle number: SPC 082-083, Wood pellet production module that includes a feed cyclone with lock, a mixer, two additive dosers, 2 pressing units each with a capacity of 250 to 350 kg/h for a total capacity of 500 to 700 kg/h, an elevator, a cooling tower and a sieve. All is wired, functional and controlled by a programmable automaton with a synoptic control panel. Bjlq Sdovt Ax Ds Ryjwl

Condition: reconditioned (used), Year of construction: 2015, Functionality: fully functional, saw blade diameter: 700 mm, Randek crosscut saw SPL728, used. Year of manufacture 2015 (Description German / Description English) The Randek crosscut saw SPL728 is effective, precise and easy to use. It has been on the market for a long time and is constantly being improved in close contact with our numerous customers. The saw blade of this semi-automatic saw supports both angle and bevel cuts, so you can make all the cuts you want. The large diameter of the saw blade also allows multiple sections of stacked wood to be cut at the same time. The saw: Angle cuts from 0° to 360° and bevel cuts from 90° to 28°. Cutting heights up to 250 mm, three boards can be cut together per cutting cycle. Computer controlled, which enables quick adjustment. Fixing the wood close to the cutting area for a precise cut. Feed direction: from right to left. Infeed table: 8.2 meters. Outfeed bench: 8.2 meters. Year of manufacture 2015. PLC from 2015. The software: The saw is equipped with an industrial PC with touchscreen that displays automatic calculations and changes. The sawing process can be closely monitored to see which step the saw is in. You can create your own cutting data or simply import complete projects from standard 3D programs for house and roof truss construction. The software was developed in a Windows environment. This makes it easy for the operating system to integrate the saw into a company network, which enables network transfer of the planned projects. Fully maintained by Randek. Belq Sd Rsvw Tg Hsyowl The SPL728 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports both angled and inclined cuts, which means it can make any cuts you may require. You can also use the large diameter blade to cut several sections of stacked timber simultaneously. The Saw: Angled cuts from 0° to 360° and inclined cuts from 90° to 28°. Cut heights up to 250 mm, possible to cut three boards each cutting cycle. Computer controlled, resulting in fast adjustment. Fixation of timber near the cutting area resulting in accurate cutting. Feeding direction: right to left. Infeed bench: 8.2 meters. Outfeed benches: 8.2 meters. Manufactured 2015. PLC from 2015. The software: The saw is equipped with an industrial PC with a touch screen that displays automatic calculations and changes. You can follow the saw process and always know what cut in which piece you are. You can make your own cut data, or simply import complete projects from market leading house and truss dimensioning 3D programs. Since the software is developed in windows environment, the operating system makes it simple to integrate the saw with the corporate network, allowing for network transfer of the projects scheduled to be done. Full service done by Randek.

Year of construction: 2022, Condition: used, New: Yes Colour: White Bslsuighcsq Sd Ryjwl Field of application: Construction Empty weight: 350 kg Reference number: 1 EPA Marked: yes Delivery terms: EXW Production country: KR Please contact Ö. Inalkac for more information ACP5R is 350kg excavator mounted vibration plate compactor with hydraulic rotation. ACP5R is suitable for 6-12ton excavator. Available from Netherlands. Contact us for details. Verdichter, Compacteur, Puristin, Kompaktor, compactador, Zagęszczarka, Þjöppur, Komprimator, Цомпацтор, Συμπιεστής, Compattatore, Trilblok

Condition: repair required (used), Table size: 2900 x 1200 mm Folded size (without legs: )420 mm Opened size: (without legs): 1700 mm without hydraulic unit! Quantity: 1 pc Bwsleik Hbzoq Sd Ryjl Price/pc

Condition: excellent (used), Year of construction: 2008, operating hours: 117,000 h, Functionality: fully functional, machine/vehicle number: Vers. F12, fuel type: gas, power: 3,048 kW (4,144.12 HP), Currently in operation, until April 2025. Longblock replacement during major overhaul (60,000 hours). Last intervention, minor overhaul (90,000 hours) Regularly maintained and covered by preventive and corrective assistance contract of the supplier. Complete system of: - heat exchanger for hot water (Siat 900 kW); - heat exchanger for diathermic oil (423 kW); Bwolq Sderdx Ddo Ryjl - refrigeration absorber (Johnson Controls/York, 1,473 kW), with evaporative towers. Version Dia.Ne: XT (PP450)

Condition: ready for operation (used), Logsorting line with 14 + 1 pockets ( 2 x 7 ) Bwslq Sdsr Hbcfo Ryjl Rema system with measuring frame type 9001 Hydraulic log kickers

Condition: used, kW: 30 kW: 7,5 kW: 7,5 Bwelq Sd Regri Iisyjl kW: 0,55 kW: 4 Electric motor for oil cooler: 0,75 Hydraulic station is in working condition.

Condition: used, Year of construction: 2018, operating hours: 136 h, mast type: telescopic, fuel type: diesel, General information Field of application: Construction Drivetrain Drive: Track Bwslq Sot Svmzod Ryel Weights Empty weight: 14.300 kg Functional Lifting capacity: 250 kg Working height: 2.198 cm Condition General condition: very good Technical condition: very good Visual appearance: very good Other information EPA Marked: yes Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Max. horizontal reach: 1990 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 140 Transport dimensions (LxWxH): 8.48 x 2.5 x 2.3 Additional information Please contact Sales Department Collé Sittard for more information

Year of construction: 2023, Condition: used, General information New: Yes Field of application: Construction Reference number: 2 Weights Empty weight: 930 kg Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Latest inspection: new Production country: KR Additional information Please contact Ö. Inalkac for more information AJCE ACP-20 Vibration Plate Compactor for excavators. ACP20 is 920kg and fits on 16-26ton excavator. We have also Compactors for 5, 10, 15, 20, 30 ton excavators. Contact us for details. Bwelqsq Ixtfe Sd Ryol Verdichter, Compacteur, Puristin, Kompaktor, compactador, Zagęszczarka, Þjöppur, Komprimator, Цомпацтор, Συμπιεστής, Compattatore

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, Functionality: fully functional, pressing force: 78 t, bale weight: 600 kg, filling opening width: 750 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), net weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. Bjlsvgrh Ujq Sd Ryewl We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: ready for operation (used), Year of construction: 2012, operating hours: 100,000 h, Functionality: fully functional, machine/vehicle number: Vers. C25, fuel type: gas, power: 990 kW (1,346.02 HP), motor manufacturer: Jenbacher, 3x 1.0 MW biogas units (with Jenbacher J320), with approx. 100,000 hours Practically identical, all in the same configuration, C25 vers. Belqor Ep N Ds Sd Ryjwl No transformers and medium voltage panels. Very good condition, maintenance provided by AB Group. Available progressively from mid-May '25

Condition: good (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 108-9072, type of input current: three-phase, I will sell an IM Hart AB / IMH / Mychrome R-1000 nailer, a nailer in good working order in continuous use, complete with a corner trimming line, stacker, and a receiving feeder. Possibility of testing the nailer itself on site, the rest of the line has already been dismantled. Year of production: 2009 Price: 40,000€/net Bjlq Sevnticed Ryewl

Condition: new, Thickness: from 10 - 30 mm Width: up to 50 mm Length: from 1200 - 1500 mm Loading height: 700 mm Swedabo AB BSCx2 sticker-stacker cassettes, Bslq Sskm Rwted Ryewl We offer liner cassettes to make your board packing system easier. - Thickness: from 10 – 30 mm, - Width: up to 50 mm, - Length: from 1200 - 1500 mm, - Loading height: max 700 mm.

Condition: used, Year of construction: 2018, operating hours: 68 h, fuel type: electric, axle configuration: 4x4, Equipment: all wheel drive, General information Field of application: Construction Drivetrain Drive: Wheel Weights Empty weight: 18.000 kg Functional Lifting capacity: 750 kg Lift height: 2.600 cm Bolet Su N Ujq Sd Ryswl Working height: 2.800 cm Condition General condition: very good Technical condition: very good Visual appearance: very good Other information EPA Marked: yes Transport dimensions (LxWxH): 5.96 x 2.5 x 3.2 Additional information Please contact Sales Department Collé Sittard for more information

Condition: new, Year of construction: 2024, General information Field of application: Construction Reference number: 3 Drivetrain Make of engine: Parker Weights Empty weight: 600 kg Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 5-10ton EPA Marked: yes Delivery terms: FOB Working pressure: 230 bar Required hydraulic flow: 90 l/min Additional information Please contact Ö. Inalkac for more information AJCE ACR52H mini concrete crusser is 550kg and fits on 5~10 ton excavator. ACR52H is with hydraulic rotatio, double cylinder and speed up valve. Available from our Netherlands warehouse. Bwolqoq Ixrwo Sd Ryel vergruizer, pulverizer, crusher, Abbruchscheren, Betonpulverisierer, concasseur à béton, Betonbrecher, trituradora de concreto, дробилица за бетон, kruszarka do betonu, concasor de beton, betongkross, betonknuser

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, Log scanner with belonging electric-operating equipment and operators chair *Is a high-performance scanner. The system will operate at very high line speeds, making it the perfect choice in a modern sawmill. • Provides a true image of log ovality, taper and sweep. Damage and knots are registered and taken inti consideration. • Can be used at all log measuring positions. Log sorting, log optimisation and log turning in the saw line. Belq Sdjt Irffe Ryowl • Can measure bark thickness. The RS-Bark add-on can calculate the actual log shape under bark. The function can be used in combination with log pattern sorting in the log sorting line to reduce the need of diameter-based log classes. • Minimal need for calibration and service. Easy to calibrate and no need for supplier expertise in case of replacement

Condition: excellent (used), Year of construction: 2014, operating hours: 70,000 h, Functionality: fully functional, machine/vehicle number: Vers. F02, fuel type: gas, power: 2,004 kW (2,724.68 HP), motor manufacturer: Jenbacher, Currently in operation, until July 2025 (expected operating hours at that date approximately 70,000). Last maintenance carried out at 30,000 operating hours of operation. Regularly maintained and covered by a preventive and corrective assistance contract from the supplier. Will require immediate major overhaul. Bwelq Sd Rsi Hp Nyoyol System complete with flue gas heat exchanger (Siat 753 kW) for steam production, gas inlet pressure increase system. Dia.Ne version: XT3 The system will be supplied without transformers and medium voltage management panels.

Condition: used, mileage: 216,365 km, power: 375 kW (509.86 HP), first registration: 09/2022, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 09/2025, gearing type: semi-automatic, emission class: euro6, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), navigation system, parking heater, Fifth wheel height 1.22 Electronic emergency braking assistant, ASR, limiter, LDW lane assistant, attention warning, turning aid, cruise control distance controlled stop & go, online traffic navigation, smartphone integration, automatic lubrication of fifth wheel plate Jost, auxiliary drive gear, multifunction steering wheel leather, preparation for CB radio, roof antenna for radio. Fifth wheel coupling Jost JSK 42 K0 2 inch Bjlsvuv T Req Sd Ryjwl

Condition: new, Year of construction: 2024, total height: 860 mm, total length: 2,400 mm, total width: 1,200 mm, overall weight: 920 kg, height adjustment type: mechanical, Manufacturer: GERD WOLFF Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm Bslq Sdjvbbqnj Ryewl • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, Year of construction: 2024, total height: 860 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 650 kg, height adjustment type: mechanical, Manufacturer: GERD WOLFF Technical Details: • Length 2000 mm • Width 1000 mm • Height 200 mm • Weight 650 kg Bslq Sd Revbbqzoyjwl • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 4 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table