Used Isal Pb170 Glp for sale (129)

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Bsliq Uewc T Igjphewl

Condition: used, • The assembled machine can be viewed in D. Weisense until the end of April. • Type - PARTICA GLP 3000 • Year of manufacture – 2013 • No. GG 1800-0690 • With 3 axes • Numerous diamond and polishing tools Bslev Tya Seiq Uphowl • Dimensions: W 5200 x D 2900 x H 2000 mm • Travels approx. 3150 x 1415 mm • 16-station tool changer • Weight: 4300 kg Very good condition, little used, from a small company.

Condition: used, power: 390 kW (530.25 HP), fuel type: diesel, color: blue, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Year of construction: 2025, PRIVATE NEGOTIATION Bsliq Ujwct Hpjphswl The price does not include VAT IPT and MSS. VEHICLE OPTIONS: - ZF Intarder - Optimized aerodynamics with deflectors and side skirts   with extension - DAF Digital Vision System & Corner View for maximum safety and visibility - Climate Pack for maximum comfort in all conditions. - DAF infotainment system - High efficiency tires - Extended maintenance interval Vehicle available at our Calcinato office: Via Statale, 98 - 25011 Ponte San Marco (BS) Mail: info. Offer valid for contracts and registrations by 05/31/2025 subject to approval. - We accept trade-ins of any vehicle subject to appraisal. - Possibility of financing or leasing for any amount based on customer needs. We are EXPERTS in remote negotiations offering you the best solution to buy our vehicles even if you live far from the Province of Bergamo. We invite you to verify the characteristics of the vehicle published. Lodotruck s.r.l. declines all responsibility for any involuntary inconsistencies with respect to the description in the ad. If you are interested in the vehicle, in response to the ad indicate: city and telephone number. In case of exchange, indicate: make, model, color, month and year of registration, kilometers, main accessories, transmission, KW / CV and condition of the vehicle (better if with attached photos). With this information we will be able to respond to you more quickly CUSTOMER SERVICE OPENING HOURS: Monday to Friday 8.30 - 12.30 / 14.00-18.30 Saturday: 08.30 - 12.30 Contact us at

Condition: used, mileage: 41,262 km, power: 125 kW (169.95 HP), first registration: 05/1993, overall weight: 7,490 kg, fuel type: diesel, color: green, gearing type: mechanical, loading space width: 2,330 mm, loading space length: 4,500 mm, loading space height: 1,920 mm, total width: 2,500 mm, total height: 3,600 mm, number of seats: 2, Equipment: ABS, all wheel drive, parking heater, +++ H-appraisal as SoKFZ office possible +++ Boliq Usvbnwuephowl MB 917 with selectable 4x4 all-wheel drive and off-road reduction 2 diff locks insulated 4.6 m police radio box with sliding windows in real glass, 2 stairs the box is spring-mounted - so that the chassis can be twisted when driving off-road There is also a roof hatch and two external doors with slide-in or folding steps 220V external power supply, 2nd set of batteries, storage boxes including mobile power generator 2KVA in the pull-out The cab is equipped with individual seats, a 3rd seat can be installed in the middle There is also ABS and power steering, making the truck easy to drive Thanks to the long axle ratio, a top speed of 100 km/h (GPS) is achieved The vehicle has been serviced throughout & is ready to drive off immediately - starter batteries are new It offers a very good basis for further conversion as a motorhome Interior dimensions: 4500 x 2330 x 1920 mm (LxWxH) OM 366 engine, 5-speed manual gearbox 714056 Wheelbase (wheelbase) 3640 mm Unladen weight without fittings in the box and roof platform/roof stowage box: approx. 6.2 t + 206 +

Condition: used, Year of construction: 2014, Used filling monoblock TEHNOMETAL 45 45 8 year 2014 The Used filling monoblock TEHNOMETAL 45 45 8 year 2014 efficiently bottles carbonated beverages and water, both still and sparkling. TEHNOMETAL manufactured this monoblock in 2014, integrating rinsing, filling, and capping functions into a compact structure. As a result, this design optimizes production processes and ensures high efficiency. Technical specifications of the Used filling monoblock TEHNOMETAL 45 45 8 year 2014 The Used filling monoblock TEHNOMETAL 45/45/8 year 2014 operates with PET containers and supports 0.50 liter and 1.5 liter formats with a PCO 1810 neck of 28 millimeters. In particular, the system rotates clockwise, ensuring a continuous and uniform production flow. The Used filling monoblock TEHNOMETAL 45 45 8 year 2014 fills up to 7,000 bottles per hour. When working specifically with 1.5 liter bottles, it processes up to 4,500 bottles per hour, aligning its performance with the blower’s capacity. Consequently, this monoblock ensures optimal production rates. Rinsing unit in the Used isobaric monoblock TEHNOMETAL First, the rinsing unit uses 45 grippers and applies a single treatment process to clean each bottle before filling. Therefore, this setup effectively reduces contamination risks. Filling unit The isobaric filling system in the Used filling monoblock TEHNOMETAL 45 45 8 year 2014 contains 45 filling valves, which ensure precise and uniform product dosing. Moreover, the fixed nozzle configuration maintains accurate flow control, making the machine ideal for bottling soft drinks and carbonated water, where pressure stability is essential. Furthermore, the isobaric system ensures that carbonation remains stable throughout the filling process. In addition, its design minimizes product waste, improving overall efficiency. Capping unit The Used isobaric monoblock TEHNOMETAL includes a capping unit with 8 heads, which applies plastic screw caps of 1810 type, compatible with a 28 millimeter neck. As a result, this system securely seals the bottles, preserving product integrity over time. Equally important, it ensures a smooth capping process at high speeds. Safety and operational stability The Used filling monoblock TEHNOMETAL 45/45/8 year 2014 features advanced safety systems that protect both the bottles and the operator. Additionally, it includes mechanisms that prevent misalignment during operation. With this in mind, the system ensures consistent performance even under demanding production conditions. Boliqev Ng Sto Uphowl With a total weight of 6,500 kilograms, the structure remains stable even at full production speed. For this reason, manufacturers can rely on its durability. Applications and compatibility of the Used isobaric monoblock TEHNOMETAL This Used isobaric monoblock TEHNOMETAL meets the demands of the beverage industry and adapts to various production needs. Specifically, it efficiently processes: Soft drinks Still water Sparkling water Because of its high efficiency, the Used filling monoblock TEHNOMETAL 45 45 8 year 2014 delivers excellent performance for PET bottling lines. At the same time, it ensures reliability and cost-effectiveness. To summarize, this machine offers a strong balance between speed, precision, and safety.

Year of construction: 2016, Condition: excellent (used), Manufacturer: HUMPE Fördertechnik Year of construction: 2016 Conveying capacity: approx. 30 cbm/h Bucket width: 200 mm Drive: 7.5 kW Speed monitor Misalignment monitor Maintenance platform Bwoliq Usv S Eg Iophol 2-way flap

Condition: ready for operation (used), machine/vehicle number: J2E5021200, Condition Used Stock Number 47386 This listing is for a Pierre Guerin Technologies EVO 50-60L Fermenter. The unit is in full working condition and is ready for immediate release. Please see spreadsheet attached at the bottom of listing for all parts included with this unit. The Pierre Guerin EVO Series fermenters and bioreactors are precision-engineered systems designed for advanced bioprocess research, development, and small-scale production. These mobile, Sterilize-In-Place (SIP) and Clean-In-Place (CIP) units are optimal for applications ranging from educational settings and RD to pilot-scale productions within GLP or GMP environments. They are versatile and suitable for various culture types, including yeast, bacteria, fungi, or cell cultures, operating in batch, fed-batch, continuous, or perfusion modes (with appropriate accessories). Key Features: Vessel Design:Capacity Configuration: Working volume of 50-60L with a total volume of erial Surface Finish: High-grade 316L stainless steel, with an internal surface finish of Ra ≤ 0.8 µm and pipework Ra ≤ 1.6 µm, ensuring sterility and rilization Temperature Control: Double jacket for automatic media sterilization and precise culture temperature rating Pressure: Maximum vessel pressure of 4 barg, jacket pressure up to 6 dplate Design: Removable flat headplate for easy access and maintenance. Agitation System:Drive Type: Available in mechanical coupling with a single seal or magnetic coupling with a synchronous drive for reduced contamination eller Configuration: Standard setup includes one HTPG4 impeller, one Rushton impeller, and one baffle, providing optimal mixing for various culture ed Range: 30 to 1200 RPM with precision que Monitoring: Integrated system for monitoring agitation performance. Instrumentation Control:Measurement Control:Temperature: PID-controlled temperature tation Speed: Precise real-time : Online monitoring and automated ₂ (Dissolved Oxygen): Optical probe-based real-time monitoring and m Level: Automatic detection and antifoam ght Measurement: Integrated load cell al or Viable Cell Density Measurement: Optional high-accuracy sensors tune Control System:Graphical Interface: Intuitive touchscreen Compliance: 21 CFR PART 11 GAMP 5 anced Process Control: Includes profile management, real-time calculations, and automation ote Monitoring Data Logging: Supports Ethernet™ network integration for remote supervision and maintenance. Gas Fluid Management:Gas Control: Automatic control of air, oxygen, nitrogen, and CO₂ istaltic Precision Dosing Pumps: Integrated system for nutrient and pH ia Addition Sampling: Dedicated ports for sterile sampling and automated feed control. Cleaning Sterilization:SIP (Sterilize-In-Place): Automated sterilization (Clean-In-Place): Fully integrated system for effortless cleaning between cifications:Nominal Working Volume: 50-60 litersMinimum Working Volume: 35 litersTotal Volume: 75 litersAgitation Speed Range: 30-1200 RPMMaterial: 316L stainless steel with Ra ≤ 0.8 µm finishPressure Ratings: Maximum operating pressure 2 barg for vessel and 2.5 barg for rilization: SIP CIP capabilityControl System: Neptune SCADA-based, remote monitoring readyGas Control: Automated sparging system for O₂, N₂, CO₂, and airPumps: Integrated peristaltic dosing feed pumpsProcess Modes: Batch, Fed-Batch, Continuous, Perfusion Parts List: Bolov I Hy Ueiq Uphowl Brochure:

Condition: used, Year of construction: 2020, Functionality: fully functional, EP 120 V Equipment: - Torsion-resistant press box with replaceable floor wear plates - Press piston in heavy design with height-adjustable stable rollers (thus adjustable knife gap) - Pre-installed inclined knife, thus higher cutting forces and a shock-free cutting mechanism - Knife fastening using an innovative screw system and thus easy knife replacement possible - Counter knife system with large cutting clearance angle and optimal cutting geometry - Drive of the needle carriage unit via a robust chain and side guide mounted on rollers (everything adjustable) - Two individually mounted retaining teeth on each press frame side (material expansion in the press shaft is thus avoided) - Extremely stable channel adjustment with oversized adjustment cylinder - Menu-controlled material selection with type and bale length preselection - Control cabinet with manual controls and touch panel with simple operating instructions - Demand switching of the main pumps for energy-efficient Pressing operation - All required safety standards and safety locks Technical data: Bwslov Imldjiq Uphsl - Pressing force of 120 tons - Length of the channel baler: approx. 12,700 mm - Height of the channel baler: approx. 3,600/4,300 mm - Weight of the channel baler: 32 t - Filling opening: 1,000 mm x 2,000 mm - Channel cross-section: 750 mm x 1,100 mm - Bale weight: 600 - 900 KG - Bale format: H=750 mm x W=1,100 mm - Pressing force of the press ram: 120 t - Pressing power: Main pump drive: 2 x 55 kW // Oil tank volume: 2,720 liters - Noise reduction hydraulic unit: Sound pressure level - Automatic 5-fold vertical bale strapping for wire thicknesses from 2.8 mm to 3.8mm - Piston slide principle: needle slot cover - Wear-resistant Hardox base plate in screwed design - Horizontal cylinder bracket: This counteracts misalignments of the press plate due to wear - Articulated bearing on the cylinder piston - Rails of the press plate Hardox screwable and replaceable - Adjustable rollers of the press plate - Path-distance measuring system integrated in the cylinder, optimal position detection of the press ram - Hydraulic oil

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 15,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, spindle speed (min.): 7,000 rpm, X-AXIS STROKE 15000 MM Z-AXIS STROKE 1500 MM Y-AXIS STROKE 3000 MM SPINDLE CONNECTION ISO 50 DIN 69871 Bslov Hbf Asiq Uphewl SPINDLE MOTOR POWER 42 KW MAX SPEED 7000 RPM 1180 Nm CNC HEIDENHAIN iTNC 530 HSCI 80-PLAN TOOL CHANGER AUTOMATIC MILLEMISAL HEAD 0.001 ° X 0.001 ° HORIZONTAL SPINDLE EXTENSION 400 MM HORIZONTAL SPINDLE EXTENSION 600 MM HEAD PICK UP HYDROSTATIC ROTARY TRANSLATING TABLE 2500 X 2000 MM CAPACITY 30 TON, CONTINUOUS POSITIONING INTERNAL COOLANT 40 BAR AND EXTERNAL COOLANT 4 BAR 2000 LITRE TANK WITH PAPER FILTER TRANSVERSAL CHIP CONVEYOR 4300 MM PLACED ON THE RIGHT SIDE STATIC RTCP IN SPACE AUTOCAL , AUTOMATIC CALIBRATION SOFTWARE FIXED PLATES YOM 2015

Condition: repair required (used), Year of construction: 2008, Machine is operational and still in use, however has some technical challenges! Following is noted: Image sometimes goes lighter/darker Bwolievxuwcjq Uphel Image intensifier (orbital moving part) from time to time is misaligned on the axis and needs to be manually readjusted. Due to this also the fuse will disengage and middle section will misalign. This is the reason is is used in manual and not auto mode at this point. Will be sold as spares or for someone who is willing to rectify the technical challenges! Further information upon request!

Condition: used, Year of construction: 2005, Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph The Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph efficiently delivers continuous production in the bottling sector. Manufactured in 2005, this machine currently operates and, importantly, remains available for on-site inspection until March 2025. Technical Features of the Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph This SMIform machine, model SR8, features 8 cavities for bottle formation. Consequently, this configuration produces 12,000 bottles of 0.5 liters per hour. For larger formats, such as bottles of 1.5 liters and 2 liters, it achieves a production speed of 9,600 bph. Moreover, the 18-81 bottle neck type guarantees compatibility with a wide range of caps and closures, making it adaptable to diverse production needs. Thus, this standard ensures precise sealing and airtight closures.. Bwelievv E Hisq Uphsl Main Components of the Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph This SMIform machine integrates a preform loader, a preform elevator, and a preform orientator, which work in harmony to provide an automated and efficient feeding process. Preform loader: This component loads preforms from the storage area or initial container and transfers them seamlessly to the elevator system. Consequently, it ensures continuous feeding without manual interruptions. Preform elevator: The elevator lifts the preforms from the lower level to the machine’s operating level, ensuring a continuous flow to the orientator and minimizing downtime. Therefore, production proceeds smoothly. Preform orientator: The orientator positions and aligns each preform correctly before inserting them into the blow molding cavities. Additionally, using mechanical guides or vibrations, it prevents misaligned preforms from entering the process. The integrated tipper tilts and discharges large quantities of preforms, typically stored in containers or boxes, in a controlled manner. Subsequently, the tipper feeds the preforms into the production line, maintaining a consistent flow while preventing overloads and blockages. By automating this process, the tipper reduces manual handling and significantly increases safety and productivity. The unscrambler plays a key role in separating and aligning the preforms before their insertion into the blow molding cavities. Specifically, by applying rotation and vibration, the unscrambler ensures optimal positioning, minimizing errors and machine stoppages. Hence, the combined action of the tipper and unscrambler maximizes production line efficiency and guarantees product quality. Furthermore, the machine’s rotary configuration facilitates continuous and stable production, which is ideal for high-intensity manufacturing. Its rotary technology, as a result, distributes heat evenly during the blowing process, ensuring high-quality output. Safety and Documentation The blow molding machine includes technical manuals and safety protections.

Condition: ready for operation (used), Schleich GLP2-ce combination tester SN:8423 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Bwolorv T Saeiq Uphel

Condition: ready for operation (used), Condition Used Stock Number 47290 This listing is for 1 of 4 Pierre Guerin Technologies EVO 10-20L Fermenters. The unit is in full working condition and is ready for immediate release. Please see spreadsheet attached at the bottom of listing for all parts included with this unit. The Pierre Guerin EVO Series fermenters and bioreactors are designed for precision in bioprocess research and development. These mobile, SIP (Sterilize-In-Place) and CIP (Clean-In-Place) units are ideal for applications ranging from educational settings and RD to pilot-scale productions within GLP or GMP environments. They are versatile and suitable for various culture types, including yeast, bacteria, fungi, or cell cultures, operating in batch, fed-batch, continuous, or perfusion modes (with appropriate accessories). Key Features Vessel Design:Capacity Configuration: Working volume of 10-20L with a total volume of erial Surface Finish: High-grade 316L stainless steel, with an internal surface finish of Ra ≤ 0.8 µm and pipework Ra ≤ 1.6 µm, ensuring sterility and rilization Temperature Control: Double jacket for automatic media sterilization and precise culture temperature rating Pressure: Maximum vessel pressure of 2 barg, jacket pressure up to 2.5 dplate Design: Removable flat headplate for easy access and maintenance. Agitation System:Drive Type: Available in mechanical coupling with a single seal or magnetic coupling with a synchronous drive for reduced contamination eller Configuration: Standard setup includes one HTPG4 impeller, one Rushton impeller, and one baffle, providing optimal mixing for various culture ed Range: 30 to 1200 RPM with precision que Monitoring: Integrated system for monitoring agitation performance. Instrumentation Control:Measurement Control:Temperature: PID-controlled temperature tation Speed: Precise real-time : Online monitoring and automated ₂ (Dissolved Oxygen): Optical probe-based real-time monitoring and m Level: Automatic detection and antifoam ght Measurement: Integrated load cell al or Viable Cell Density Measurement: Optional high-accuracy sensors tune Control System:Graphical Interface: Intuitive touchscreen Compliance: 21 CFR PART 11 GAMP 5 anced Process Control: Includes profile management, real-time calculations, and automation ote Monitoring Data Logging: Supports Ethernet™ network integration for remote supervision and maintenance. Gas Fluid Management:Gas Control: Automatic control of air, oxygen, nitrogen, and CO₂ istaltic Precision Dosing Pumps: Integrated system for nutrient and pH ia Addition Sampling: Dedicated ports for sterile sampling and automated feed control. Cleaning Sterilization:SIP (Sterilize-In-Place): Automated sterilization (Clean-In-Place): Fully integrated system for effortless cleaning between cifications:Nominal Working Volume: 10-20 litersMinimum Working Volume: 7 litersTotal Volume: 23 litersAgitation Speed Range: 30-1200 RPMMaterial: 316L stainless steel with Ra ≤ 0.8 µm finishPressure Ratings: Vessel 2 barg, Jacket 2.5 bargSterilization: SIP CIP capabilityControl System: Neptune SCADA-based, remote monitoring readyGas Control: Automated sparging system for O₂, N₂, CO₂, and airPumps: Integrated peristaltic dosing feed pumpsProcess Modes: Batch, Fed-Batch, Continuous, Perfusion Parts List: Bwsliqsv I Hzfj Uphsl *only 1 out of the 4 units is supplied with a Nuova General Instruments 2883/D10/C-FMP Safety Pressure Valve Brochure:

Year of construction: 2024, Condition: new, Continuous fryer ( ELECTRIC, GAS, OIL ) or frying train ideal for a large production auromatically, having the minimum use of labor and with high productivity. This chain fryer is designed for pre-fried, fried potatoes, fried foods such as croquettes, marble foods, flamenquines, nuggests, cachopo, plate of ham and cheese,... ,pastry products in general such as: churro, fritter, doughnut, xuixo, donut, creme filled pastry... Nuts: peanut, almonds, cashews,... Even for baking pasta. Bwsliq Uog A Tvksphjl Thanks to its extremely simple control panel, it is easily programmable. Simply enter the ideal frying temperature on the thermostat and select the belt speed most suitable for the product. Our continuous cycle fryer saves you time in production. TECHNICAL CHARACTERISTICS: - It incorporates a speed variator that allows the regulation of the cooking time of the product that is made, with the intention that it always has the ideal cooking time and adapted to an infinity or products. - It allows a homogeneous frying or cooking, with less oil absorption at a lower cost thanks to the reuse and filtering of the oil. Thanks to this, the oil is more durable and of higher quality. - Optional availability of including extraction hood in the fryer itself. - Easy cleaning and disassembly. - Oil filtering system by means of a re-circulating pump to the tank. Mobile machine with brake Connection 240 / 400V, o G20 (GN) G30(GLP) Dimensions see various dimensions. New machine With warranty. Price from 7990 euros.

Condition: used, Year of construction: 2006, Used Capping Machine AROL T stopper year 2006 Machine Description of the Capper AROL KAMMA PKV The machine is specifically designed for efficient and reliable bottling with T-stoppers in industrial settings. With its five heads, the machine precisely manages each step of the process. Consequently, it maintains closure quality consistently while operating at high production speeds. Cap Gripping System To ensure effective stability during cap positioning, the machine’s vacuum-based gripping system secures each cap, which significantly reduces the risk of errors or misalignment. Moreover, an integrated vacuum pump powers this mechanism, ensuring a firm and consistent grip on each cap throughout the process. Adjustable Capping Head One key advantage of the AROL capping machine is its adjustable-height capping head, which easily adapts to various bottle sizes. As a result, this versatility makes the machine suitable for different production formats. Therefore, it increases both efficiency and operational flexibility. Cap Distribution System An alveolar centrifugal distributor manages cap distribution, ensuring uniform and consistent delivery. Furthermore, this component minimizes the risk of jamming. Thus, it keeps the workflow continuous, which is essential for maintaining high and uninterrupted production. Safety and Materials The Used Capping Machine AROL T stopper year 2006 includes safety guards, which effectively protect operators throughout operation. Additionally, the machine’s stainless steel exterior provides strength and corrosion resistance, which are both critical for use in the food and beverage industries. Production Speed and Inverter Control Thanks to its inverter control, operators can easily adjust the machine’s speed, allowing it to meet specific production demands. Consequently, the AROL capping machine can reach a production capacity of approximately 7,000 bottles per hour. Thus, it offers an ideal combination of efficiency and flexibility to satisfy market needs. Bottle Flow Configuration With its left-to-right bottle feed (clockwise flow), the machine optimizes the production line layout. This setup, therefore, integrates smoothly into existing systems, reducing installation time. In turn, it supports continuous production and maximizes operational efficiency. Production Year of the Capper AROL KAMMA PKV Manufactured in 2006, the Used Capping Machine AROL T stopper combines reliability with proven technology. Even though it was produced years ago, the machine still upholds high-quality standards. Hence, it offers companies a reliable and versatile capping solution. Bwoliqevgvcco Uphel

Condition: ready for operation (used), machine/vehicle number: 108299, Condition Used Stock Number 31397 This listing is for a GE Healthcare GeneQuant 1300 Spectrophotometer. The unit is in full working condition and is ready for immediate release. Unlock the full potential of your laboratory with the GE Healthcare GeneQuant 1300 Spectrophotometer, a cutting-edge UV/Visible instrument specifically designed for accurate measurement of nucleic acid and protein concentrations, as well as bacterial cell culture density. This versatile device is essential for researchers seeking reliable and precise analytical performance. Key Features: Wide Wavelength Range: Operates between 190-1100 nm, allowing for extensive applications in life sciences, including nucleic acid purification and protein assays. User-Friendly Interface: With the convenience of one-touch calibration curves, kinetics, or ratio measurements, the GeneQuant 1300 simplifies complex analyses. Customizable Analytical Performance: Save up to 90 custom methods in a dedicated folder with optional password protection, ensuring secure and efficient data management. Visual Inspection Capabilities: Quickly detect impurities in nucleic acid scans, particularly beneficial for RNA samples. Technical Specifications: Wavelength Calibration: Automatic upon switch-on for hassle-free operation. Spectral Bandwidth: 5 nm for precise measurements. Wavelength Accuracy: ± 2 nm and Wavelength Reproducibility: ± 0.5 nm for reliable results. Light Source: Long-life stabilized Xenon lamp for consistent performance. Dimensions: 260 × 390 × 100 mm with a weight of 4.5 kg, making it compact and easy to integrate into any lab setup. Power Requirements: Compatible with 100–240 VAC ± 10%, 50/60 Hz. Bwjlouybc Soiq Uphjl Benefits: Convenient Data Output: Results can be printed via an optional integrated printer or sent to a PC using USB or wireless Bluetooth accessories, enhancing data accessibility. Robust Design: The press-to-read feature reduces lamp-on time, while optics with no moving parts minimize the risk of optical misalignment. The GE Healthcare GeneQuant 1300 Spectrophotometer is the ideal tool for life science applications, providing researchers with the reliability and precision necessary for successful experiments. Elevate your laboratory's capabilities and ensure accurate results with this exceptional spectrophotometer!

Condition: ready for operation (used), Condition Used Stock Number 48629 This listing is for a Hanna HI93703C Logging Turbidity Meter. The unit is in full working condition and is ready for immediate release. The Hanna HI93703 Series Logging Turbidity Meters are advanced, microprocessor-based instruments designed to provide laboratory-level precision for turbidity measurements in field conditions. Perfect for environmental monitoring, water quality testing, and various industrial applications, these meters offer an easy and accurate solution for on-site turbidity testing. With its dual operating ranges, the HI93703 ensures versatility for measuring varying levels of turbidity, making it an essential tool for researchers, engineers, and quality control personnel. Key Features: Dual Operating Ranges: The HI93703 series features two measurement ranges: 0.00 to 50.00 FTUs for low turbidity and 50 to 1000 FTUs for high turbidity, accommodating a wide array of sampling conditions. Easy Calibration: The meter allows for straightforward 3-point calibration using AMCO-EPA standards, ensuring accuracy and compliance with ISO 7027 protocols. Enhanced Data Logging: The HI93703-11 model includes a real-time clock and the capability to log up to 199 measurements, facilitating efficient data collection and monitoring. Data Management: Collected data can be easily downloaded to management systems using the Windows® compatible HI92000 software, allowing for comprehensive data analysis and reporting. Good Laboratory Practice (GLP) Compliance: Both versions meet GLP requirements, ensuring last calibration data storage for regulatory adherence. Specifications: Measurement Range: 0.00 to 50.00 FTU 50 to 1000 FTU Resolution: 0.01 FTU (for 0.00 to 50.00 FTU range) 1 FTU (for 50 to 1000 FTU range) Bwsliqou Hu Uno Uphsl Accuracy: ±0.5 FTU or ±5% of reading (whichever is greater) Calibration Points: 3 points (0 FTU, 10 FTU, and 500 FTU) Light Source: Infrared LED Light Detection: Silicon Photocell Battery Type / Life: 4 x 1.5V AA batteries Approx. 60 hours of continuous use or 900 measurements Automatic shut-off after 5 minutes of non-use Operating Environment: Temperature: 0 to 50°C (32 to 122°F) Humidity: RH max 95% non-condensing Dimensions: 220 x 82 x 66 mm (8.7 x 3.2 x 2.6 inches) Weight: 510 g (1.1 lb.)

Condition: ready for operation (used), machine/vehicle number: 01298, Condition Used Stock Number 29042 This listing is for a Jenway 3540 pH Conductivity Meter. The unit is in full working condition and is ready for immediate release. Bolisvyvldjq Uphswl The Jenway 3540 is a versatile combined pH and conductivity meter tailored for water testing applications in laboratories. Its compact design and dual functionality make it an excellent choice for efficient analysis of both parameters. Key Features:Conductivity Measurement Range: Measures conductivity from 0.01 μS/cm to 1.999 S/cm, suitable for various water quality Measurement Range: Capable of measuring pH levels from 2 to 20.000, accommodating a wide range of perature Measurement Range: Operates within -10.0 to 105.0°C (14 to 221°F), enabling measurements in diverse environmental satile Measurement Options: Includes salinity and TDS (Total Dissolved Solids) measurement, resistivity, and ORP/Redox measurement via the pH ra-Pure Water Function: Ensures ideal temperature compensation for precise readings in ultra-pure water perature Compensation: Offers both manual and automatic temperature compensation with an adjustable temperature coefficient (0.00 to 10.00 % per °C).Adjustable Conductivity-to-TDS Factor: Customize the TDS factor from 0.4 to 1.0 for accurate conversions based on specific sample r-Friendly Features: Selectable units for temperature (°C/°F), ready indicator, and measurement hold features enhance a Management: Store up to 500 data sets with date and time stamps, ensuring comprehensive put Options: USB or RS232 output enables easy data transfer to software or printers, facilitating analysis and -Compliant Data Storage: Maintains compliance with Good Laboratory Practice (GLP) standards for pact Design: Features a built-in stand and wall-mount option, saving valuable lab space. Applications:Water Quality Testing:Ideal for testing pH and conductivity in drinking water, wastewater, and industrial oratory Research:Useful in laboratories for environmental monitoring and experimental setups requiring precise pH and conductivity aculture and Hydroponics:Supports monitoring water parameters critical to fish farming and soil-less cultivation, ensuring optimal growing conditions.

Condition: ready for operation (used), machine/vehicle number: 4309HH902201, Condition Used Stock Number 50626 This listing is for a Eppendorf Eporator Electroporator. The unit is in full working condition and is ready for immediate release. The Eppendorf Eporator Electroporator is a compact and efficient instrument engineered for the rapid and controlled electroporation of bacteria, yeasts, and various microorganisms. Perfect for any laboratory, the Eporator combines user-friendly programming with advanced technology to streamline your research. Key Features:Faster Sample Handling: Experience seamless operation with a simple one-button functionality, allowing for quick and efficient processing of imum Safety: The integrated cuvette holder ensures safe and secure placement of samples, minimizing the risk of spills or contamination during the electroporation pact Design: The Eporator’s space-saving design makes it an ideal choice for laboratories with limited bench space, without sacrificing performance or r-Friendly Operation: The instrument features self-explanatory operation, guided by clear display indicators, making it accessible for users of all experience grammable Softkeys: Quickly save and access your two most frequently used parameter settings with fast, freely programmable softkeys, enhancing efficiency in your Interface: Effortlessly export experimental data and maintain proper documentation with the USB port, which supports Good Laboratory Practice (GLP) standards for quality assurance. Bwjlsvyvq Heiq Uphel SpecificationsDimensions: Compact footprint suitable for space-constrained environmentsPower Supply: Standard laboratory power supplyDisplay: Intuitive LED indicators for easy navigation and operationCompatibility: Suitable for a variety of microorganisms including bacteria and yeastsData Export: USB interface for data transfer and documentation

Condition: ready for operation (used), Condition Used Stock Number 412995 This listing is for a Kern PCB 250-3 Balance. The unit is in full working condition and is ready for immediate release. The Kern PCB 250-3 is a Precision Laboratory Balance that is highly accurate, fully programmable and comes with a range of advanced features for precise record keeping and weighing. Boliqsvl Ax Ij Uphowl The balance is suitable for weighing and counting even the smallest parts. The balance is supplied with an 81mm weighing plate. A built-in recipe function makes determining the exact measurements of a mixture as easy as possible. This mode will allow you to weigh the specific parts of a mixture, record each value and recall your measurements afterwards for reference. Pre-tare function - manually subtracts known container weights Fully programmable - configure the balance to measure in special units such as length of thread g/m, paper weight g/m² or similar Percentage determination - store a given weight value (100%) and determine deviations from the target value CAL EXT function - adjust the balance's accuracy with an external adjustment weight RS232 interface - allows the balance to interface with a PC or printer GLP/ISO record keeping of weighing data with date, time and identification number Dedicated Recipe function logs the weight of a tare container plus the recipe's ingredients % Determination mode - calculates % deviations from a target value (100%) Vibration-free weighing - filters out vibrations to maintain stable weight results Supplied with a weighing range of 250g Manufacturer's part: Kern PCB 250-3

Condition: ready for operation (used), machine/vehicle number: 0039603821, Condition Used Stock Number 413008 This listing is for a Sartorius SECURA513-1CEU. The unit is in full working condition and is ready for immediate release. Integrated protection systems for minimizing your risk of obtaining incorrect results Real-time alarm messaging and interactive user guidance for levelling to prevent inaccurate results due to an unleveled balance SQmin for automatic detection and active monitoring to ensure you are within the acceptable USP operating range for reliable results Bsliqovl Av He Uphswl Fully automatic internal adjustment function, isoCAL, for the highest possible accuracy at all times Cal Audit Trail for easy, traceable documentation of all calibration and adjustment data Safe and clear documentation by sample and batch identifiers for keeping perfect track of weighing data GLP-|GMP-compliant printouts Standard password security features for protection against tampering and unauthorized access Integrated PC direct function and Plug Work connectivity to a Sartorius printer

Condition: ready for operation (used), Condition Used Stock Number 50467 This listing is for a Sartorius YCW6228 2KG E2 Weight. The unit is in full working condition and is ready for immediate release. The Sartorius YCW6228 2kg E2 Weight is a high-precision cylindrical calibration weight, designed to meet the stringent requirements of OIML Class E2 standards. Constructed from highly polished, non-magnetizable stainless steel, this weight offers excellent corrosion resistance, making it suitable for use in sensitive lab environments. It is ideal for calibrating precision balances and other analytical instruments. Key Features: OIML Class E2 for high accuracy in calibration. Material: Polished stainless steel, non-magnetizable, and corrosion-resistant. Boliqju Hva Eo Uphswl Density: 7.95 g/cm³. Nominal Mass: 2 kg. Comes in a high-quality protective case, with optional DAkkS calibration certificate available for compliance with international standards​. This weight is perfect for laboratories that require precision in quality control processes, such as GLP and GMP environments.

Condition: ready for operation (used), Condition Used Stock Number 55262 Bwoliqju Hva So Uphsl This listing is for a Sartorius YCW623 2KG / F1 Weight. The unit is in full working condition and is ready for immediate release. The Sartorius YCW623 2kg Knob Weight is a high-precision meteorological weight designed for use in laboratory and industrial settings. It meets OIML Class F1 standards, ensuring accuracy for calibrating balances and scales. Made of highly polished, non-magnetizable stainless steel, this weight is highly corrosion-resistant, making it durable and reliable in various environments. With a density of 8.0 g/cm³, it is ideal for labs requiring strict adherence to quality control protocols such as GLP and GMP. Key Features: OIML F1 classification for precise calibration Material: Polished stainless steel, non-magnetizable, and corrosion-resistant Nominal mass: 2kg Supplied in a protective case for safe handling and storage This weight is ideal for use in laboratories requiring high precision and compliance with international standards.

Condition: ready for operation (used), Condition Used Stock Number 25367 This listing is for a Mettler RS-P42 Printer. Beliqeu Hvbce Uphewl The unit is in full working condition and is ready for immediate release. The Mettler Toledo RS-P42 Printer is a compact and reliable dot matrix printer designed for use with Mettler Toledo balances and analytical instruments via an RS232C interface. It provides fast and efficient documentation of weighing results, including regular adjustments and specific application data. With a small footprint, it produces 5 cm wide printouts, making it easy to include results in lab journals. The RS-P42 is ideal for labs needing GLP, GMP, and ISO-compliant documentation. Key Features: Dot matrix printing (24 characters/line) Print speed: over 1 line per second RS232C connectivity for easy integration with balances Compact design for space-saving use in laboratories

Condition: ready for operation (used), Condition Used Stock Number 25366 This listing is for a Mettler Toledo SevenMulti pH Conductivity Meter. The unit is in full working condition and is ready for immediate release. Unit is supplied with P25 Printer. The SevenMulti is a versatile, professional-grade instrument tailored for precise measurements in various scientific and industrial applications, including environmental testing, laboratory research, and quality control in manufacturing. Key Features: pH Measurement: Range: -2 to 19.999, accommodating a wide range of acidic to basic solutions. Selectable Resolution: Users can adjust the resolution for enhanced accuracy based on specific requirements. Multi-Parameter Capability: Measures conductivity, resistivity, salinity, and total dissolved solids (TDS) with high precision, making it suitable for diverse applications, from water quality analysis to chemical manufacturing. Temperature Measurement: Range: -30 to 130 °C, suitable for various environmental conditions. Resolution: 0.1 °C, ensuring precise temperature readings that are critical for accurate pH and conductivity measurements. Integrated Electrode Testing: Conducts a comprehensive pH electrode test to assess slope, offset, drift, and response time without needing to re-calibrate, ensuring reliable and consistent performance. Compliance with Standards: Features a special mode for measuring conductivity compliant with USP and EP standards, essential for pharmaceutical and food industry applications. User-Friendly Interface: The back-lit display offers clear visibility of measurements and settings, even during two-channel operations. Context-sensitive help guides users through processes, reducing the learning curve. Security Features: Includes PIN-protected operation to safeguard sensitive data and settings. General system configurations, like date and time, can also be secured with a personal code. GLP Compliance: Adheres to Good Laboratory Practice (GLP) standards, allowing users to maintain accurate records and documentation of measurements, enhancing reliability for regulatory compliance. Ideal Applications: Bweliqsvi Ando Uphsl Laboratory Research: Perfect for academic and industrial labs conducting precise experiments requiring multiple parameter measurements. Environmental Monitoring: Suitable for testing water quality in various environments, from aquaculture to wastewater treatment. Pharmaceutical Quality Control: Essential for ensuring compliance with industry standards in drug manufacturing processes.