Used Isal Pb200 D for sale (45,985)

Condition: used, Year of construction: 2017, operating hours: 1,030 h, functionality: fully functional, machine/vehicle number: 1001, total width: 2,550 mm, overall weight: 19,000 kg, hopper volume: 5,000 l, rotor diameter: 650 mm, rotational speed (max.): 14 rpm, HAMMEL shredder, type VB 650 D, No. 1001, Tier4Final • Year of manufacture: 03/2017 • Currently approximately 1030 operating hours / changing – machine is still in operation › mounted on a robust hooklift frame • Drive system - with Cummins QSB 6.7 Tier4Final diesel engine, approx. 275 hp - Emission levels comply with Euro standards - hydrostatic drive with performance-controlled hydraulic motors • Tool shafts - special, patented tool - speed of tool shafts 14 - 38 rpm - tool shaft length approx. 1,750 mm - tool shaft diameter with tooling approx. 650 mm automatic reversing function and forced reversing • Discharge conveyor - approx. 1,400 mm wide - discharge height approx. 3,400 mm • Hopper consisting of - main and tilting hopper, approx. 5 m* total capacity • with hydraulic conveyor height adjustment via hand lever valve Ibjdpfx Aoz Tc Efod Noc • Radio remote control, 6-channel, with emergency stop • Paint color: RAL 3020 red • Total weight with additional equipment approx. 19 t Machine equipment Shaft configuration • 5-piece shaft with 7/7 discs - refurbished 1 counter-cutting bar with comb • refurbished 1 axle with drawbar 1 permanent overband magnet • hydraulic height adjustment via radio remote control MACHINE AVAILABLE FROM FEBRUARY 2027

Condition: used, axle configuration: 3 axles, first registration: 06/2007, color: other, Year of construction: 2007, Empty weight: 7.385 kg Ibjdpjxqn Hqsfx Ad Nec Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers!

Condition: used, functionality: limited functionality, overall weight: 2,100 kg, workpiece diameter (max.): 70 mm, spindle diameter: 54 mm, type of input current: three-phase, spindle speed (max.): 114 rpm, spindle speed (min.): 24 rpm, roll width: 160 mm, stroke length: 15 mm, SENY D-75-B – Hydraulic Thread Rolling Machine – 220 kN For sale is a fully functional hydraulic thread rolling machine from the Spanish manufacturer SENY, model D-75-B, with a maximum rolling force of 220 kN. Due to operational changes, the machine has been taken out of service and is no longer in productive use. However, it is still operational and can be inspected and demonstrated under power after prior appointment. The machine is designed for chip-free cold forming of external threads, as well as for knurling and profile rolling operations. The thread rolling process enables the production of high-strength threads with very good surface quality, without removing material. Technical data General information Manufacturer: SENY Country of manufacture: Spain Type: D-75-B Factory number: 327 Machine type: Hydraulic thread rolling machine Year of manufacture: Unknown Operating voltage: 380 V three-phase Rolling capacity and machining range Maximum rolling force: 220 kN (approx. 22.4 t) Workpiece diameter: 3–70 mm Maximum thread pitch: 6 mm Maximum knurling pitch: 2.25 mm Maximum rolling width: 160 mm Rolling spindles Rolling diameter: 133–170 mm Rolling spindle diameter: 54 mm (standard version) Rolling spindle spacing: 135–230 mm Rolling spindle speeds: 24 / 30 / 38 / 45 / 62 / 72 / 90 / 114 rpm Ibjdpfez Sl Arjx Ad Noc Hydraulics and feed Hydraulic roller feed Maximum working stroke: 15 mm Feed speed: 0.5–6 mm/s Adjustable rolling time: 0.1–100 seconds Adjustable pause time: 0.1–100 seconds Hydraulic oil tank: approx. 130 liters Drive power Main motor: 5.5 kW Total electrical power consumption: approx. 8.6 kW Weight Machine weight: approx. 2,100 kg Condition and scope of supply Used industrial machine Fully functional Taken out of service due to operational changes Machine is still operational Inspection and demonstration under power possible after prior appointment No thread rolling tools or rolling sets included in the scope of supply Possible applications The machine is particularly suitable for the production of external threads on screws, bolts, threaded rods and other cylindrical workpieces. In addition, knurling and profile rolling operations are possible with the appropriate tools. The robust machine design and hydraulic feed enable use in both single-piece production and series production. Inspection and further information The machine can be inspected and demonstrated under power after prior appointment. Further information and pictures are available on request. Note: The technical data is based in part on manufacturer and comparative documentation of the SENY D-75-B series. Deviations due to the year of manufacture or design may occur. All information without guarantee. Subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, machine/vehicle number: 03250551610001, arm reach: 900 mm, type of input current: three-phase, load capacity: 5 kg, control cabinet width: 440 mm, control cabinet height: 290 mm, overall weight: 200 kg, input voltage: 400 V, protection type (IP code): IP54, repeat accuracy: 0.02 mm, controller model: MC-05 Controller, wire diameter (max.): 1.8 mm, input current: 32 A, pivoting range: 360 °, warranty duration: 24 months, welding current (max.): 500 A, teach pendant model: Teach Pendant Serie MC, Equipment: CE marking, documentation/manual, type plate available, COBOT WELDING CELL METALSELF CI-05 + AOTAI 500A (EX-DEMO FOR TRADE SHOW) Turnkey collaborative welding cell. Demo unit (2025), only 12 hours of operation. Excellent cosmetic and mechanical condition, like new. Plug&Play solution ideal for flexible automation of small/medium-sized batches. Guarantees maximum precision and easy programming without the need for specific certifications. SOLD WITH A 40% DISCOUNT ON THE LIST PRICE. COBOT SPECIFICATIONS (ROBOT ARM) -Model: Metalself CI-05, Reach/Payload: 900 mm / 5 kg -Degrees of freedom: 6 axes (±180° range per joint) -Repeatability: ±0.02 mm -Protection / Weight: IP54 (industrial use) / 21.4 kg -Mobile magnetic base -Integrated transport trolley CONTROLLER & INTERFACE Ibodpfx Aezw Nvmjd Nsc -Model: IIMT05-220/100 (220V, Single-phase power supply) -Programming: Color touchscreen Teach Pendant (IIMT-TP) -Connectivity: TCP/IP, Modbus-RTU/TCP, 16 DI/DO, 4 AI/AO AOTAI AMIG-500PSR GENERATOR: Top-of-the-line inverter with dual 32-bit ARM processor. -Processes: MIG/MAG, High-efficiency pulsed MIG -Power: 500A at 100% (Duty cycle at 40°C) for intensive use -Power supply: 380V, Three-phase -Wire feeder: Double closed loop, permanent magnet motor SOFTWARE & ADVANCED FUNCTIONS INCLUDED -Drag-to-Teach: Quick programming by manually guiding the arm -Weaving/Swing: Oscillation for vertical welds/fill welds with programmable dwell -Multi-layer & Array: Repetition of passes and matrix (grid) welding -Trajectories: Support for linear, circular, spline, and tube (saddle) paths SAFETY -Integrated collision detection and adjustable sensitivity -Parking brakes on all joints active when power is off -CE compliance (EN ISO 13849-1 PL d) SALE AND SHIPPING -Machine status: Ready for delivery, viewable and testable at our location in Settimo Torinese (Italy). -Warranty: 24 months. -Documentation: CE declaration, cobot manual, welding package manual, in any language. -Shipping: EXW (Ex Works). Packaging and transportation costs are borne by the buyer (can be quoted separately upon request).

Condition: used, Year of construction: 2013, functionality: fully functional, load capacity: 1,000 kg, total height: 850 mm, total length: 2,000 mm, total width: 1,100 mm, rotary table diameter: 900 mm, overall weight: 1,100 kg, height adjustment type: hydraulic, table load: 1,000 kg, disc diameter: 900 mm, product height (max.): 1,350 mm, faceplate diameter: 900 mm, workpiece weight (max.): 1,000 kg, plate diameter: 900 mm, Equipment: foot remote control, Max load: 1000 kg Isdpfx Adez H Npij Nsbc Table size: Ø900 mm Max. height with vertical table: 1350 mm to middle of table Rotation speed: 0.1 - 1.2 rpm Featured with: Wired remote control Country of origin: The Netherlands Motor power: 0,75 kW Machine (L×W×H): 200 x 110 x 85 cm Machine weight: 1100 kg

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: - track width 340mm - roller width 360mm - disc bore diameter 70mm - max disc diameter 315mm - max cutting height 180mm * from above - feed roller, toothed, pneumatically pressed - 2 rows of ejectors - 3 sliding, smooth pressure rollers - ejectors - roller with saws - 3 sliding, smooth pressure rollers - ejectors * from below - feed roller, toothed - track - roller with saws - track - stepless feed rate adjustment via frequency inverter - main motor 2x55kW - feed motor 4kW - electric lifting of the upper body up/down - electric adjustment of the rollers with saws - central lubrication - diameter of the dust extraction nozzle 2x150mm - dimensions L/W/H 2800x2400x1900mm - weight approx. 5000kg Ibedezxqtvepfx Ad Noc ADVANTAGES – Made in Italy – Two-roller – Ideal for large components – Multi-blade saw, used, very good condition Net price: 145900 PLN Net price: 33930 EUR, depending on the exchange rate of 4.3 EUR (Prices may change due to higher fluctuations)

Condition: good (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: TCG51403A, number of ink cartridges: 4, total length: 4,200 mm, total width: 2,500 mm, total height: 1,500 mm, year of last overhaul: 2023, type of input current: three-phase, input voltage: 380 V, overall weight: 2,200 kg, working width: 320 mm, tank capacity: 5 l, used machine, dismantled Ibodettuiijpfx Ad Nec

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 1044, Diosna SP 120 D spiral mixer/kneading machine Ibododc Eh Ajpfx Ad Noc 32 Ah connection with 2-hour timer, 2 speeds on castors In excellent condition, operates quietly If you have any further questions, please contact us. Thank you in advance.

Condition: excellent (used), Year of construction: 2014, CNC MACHINING CENTER ROMI D 600 Year of manufacture: 2014 CONTROL: FANUC oi-MD Ibjdpjz Hl Dcefx Ad Njc Technical data: Drive power: 15 kW Travel ranges: X 600 mm, Y 530 mm, Z 580 mm Table surface: 840 × 500 mm Permissible table weight: 800 kg Spindle speed: 8000 RPM 20-tool changer, 80 tool holders BT 40

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 000000000000001, overall weight: 200 kg, load capacity: 5 kg, arm reach: 900 mm, pivoting range: 360 °, controller model: MC-05 Controller, teach pendant model: Teach Pendant Serie MC, control cabinet width: 440 mm, control cabinet height: 290 mm, input voltage: 400 V, input current: 32 A, type of input current: three-phase, repeat accuracy: 0.02 mm, warranty duration: 24 months, wire diameter (max.): 2 mm, protection type (IP code): IP54, welding current (max.): 500 A, Equipment: CE marking, documentation/manual, type plate available, METALSELF CI SERIES COLLABORATIVE ROBOT CELLS – WELDING AND FLEXIBLE AUTOMATION ⚠️ CURRENT PROMOTION: Contact us to discover the exceptional discounts currently available on the entire Metalself cobot range! We offer "Plug & Play" collaborative production cells, customizable to your specific needs with the entire Metalself CI Series cobot range. A smart and scalable investment that combines the precision of robotics with human flexibility, with a rapid return on investment thanks to significantly lower operating costs compared to traditional robotics. INTEGRATED WELDING PACKAGE Our cells are designed with native and optimized integration for welding processes (MIG/MAG, TIG, Laser). Supplied complete with intuitive proprietary software, they can compensate for the shortage of specialized welders. -Drag-to-Teach: Quick programming by manually guiding the arm in "zero-gravity" mode. -Advanced functions: Weaving (for vertical welds), multi-layer welding for deep joints, and Array function for matrix welding on component tables. ONE ROBOT, ENDLESS APPLICATIONS Metalself cobots are not limited to welding. Thanks to the open architecture (LUA, C/C++, Python, ROS languages) and the integrated I/O interface, the same machine can be reprogrammed in just a few minutes for over 200 industrial scenarios. Purchasing a Metalself cobot means having an tireless operator for: -Machine Tending: Automatic and continuous loading and unloading of metal or plastic components on CNC machining centers, lathes, and presses. -Palletizing and Logistics: Transfer of materials, packaging, and stacking of boxes at the end of the line 24/7 (ideal with the CI-16 and CI-20 models). -Screwing and Assembly: Micro-precision operations for the automotive and electronics (3C) industries, interfaceable with machine vision systems. THE COMPLETE RANGE (From 3 kg to 20 kg) We configure your cell by choosing the perfect cobot for your requirements: * CI-03: Payload 3 kg / Reach 600 mm * CI-05: Payload 5 kg / Reach 900 mm * CI-10: Payload 10 kg / Reach 1300 mm Ibjdpezxhmysfx Ad Noc * CI-16: Payload 16 kg / Reach 1000 mm * CI-20: Payload 20 kg / Reach 1650 mm SAFETY All models are equipped with advanced collision detection and 5 safety functions that comply with EN ISO 13849-1 (PL d) regulations. They work in close proximity to personnel without the need for expensive and bulky perimeter fences, with full CE certification. DELIVERY TIMES AND QUOTES * Supply times: Cells are manufactured and delivered in 40-50 working days. Request a personalized quote: contact us, explaining your application (welding, machine tending, palletizing). Our technicians will configure the cell to your specific needs, selecting the ideal arm and necessary accessories, and applying the current promotional discount.

Condition: good (used), Year of construction: 2013, overall weight: 560 kg, Pump technical data: • Manufacturer: KSB • Type: ETIC D 65 / 45-1 • Capacity: Q = 45 m³/h • Head: H = 182.19 m • Year of manufacture: 2013 Ibsdpfx Aoz Slnbjd Nec • Flange connections (visually DN150 – as shown in photos) • Solid, industrial construction • Pump dismantled from an industrial installation Electric motor: • Manufacturer: Siemens • Power: 37 kW • Supply: 3-phase • Speed: approx. 2950 rpm (50 Hz) • Industrial design, IC411 cooling • Mounting: IM B3 • Motor mounted on frame together with pump Condition: • Technical condition: used • Visually normal signs of use, no cracks or damage to the housing • Shafts and flanges complete (visible in the photos) • Sold as a set: pump + motor + frame Additional information: • Ideal for industrial applications: process installations, energy, chemical, process water • Price quoted per unit.

Condition: used, Year of construction: 1982, functionality: fully functional, Equipment: documentation/manual, ONA Wire Erosion Machines Type D-160 Year 1982 Equipped with 3R System ELESTA Control Iodpfsz Ha Ddex Ad Njbc

Condition: ready for operation (used), functionality: fully functional, HM-D 539 production optimization maximum disc diameter: 550 mm minimum disc diameter: 500 mm Disc saw diameter on the spindle: 30 mm voltage: 400V Ibjdpfsz Sx D Uex Ad Noc power: 10 kW loading CE marking year: 2006

Condition: used, mileage: 21,000 km, power: 58 kW (78.86 HP), first registration: 11/1989, overall weight: 3,500 kg, fuel type: diesel, color: red, next inspection (TÜV): 03/2028, gearing type: mechanical, loading space width: 1,730 mm, loading space length: 3,250 mm, loading space height: 1,830 mm, Year of construction: 1989, total length: 5,350 mm, total width: 1,975 mm, total height: 2,700 mm, number of seats: 2, 1st hand – German volunteer fire department vehicle. TÜV (technical inspection) valid until 03/2028. An expert opinion according to §23 StVZO in conjunction with §21 StVZO as a "vintage vehicle, special-purpose vehicle, fire department vehicle, equipment carrier" (for an H-approval) dated 09.03.2026 from TÜV Rheinland is available. Engine oil with filter / brake fluid / 4x glow plugs / windshield wiper blades – NEW – replaced in a specialist workshop in 2026, invoice available. Until recently, it was registered with the original owner, including the original vehicle registration document from 1989. Only 21,000 kilometers driven in total. Very well-maintained Bremen Transporter T1 in the medium-length version with the sturdy, factory-installed metal high roof. Body condition in detail: 2 rust spots (rear right wheel arch and left side panel). The front right wheel arch has already been repaired; otherwise, it is in good original condition all around. Normal signs of wear and tear are present. The underbody is in good condition. This 308 D was explicitly sold to us by the original owner as "accident-free." New winter tires (DOT 2022). High 270-degree rear doors and fog lights, rear axle stabilizer, and reinforced shock absorbers. Otherwise, it is an absolute basic version. No seatbelts. No power steering. No ABS. Simply pure 1980s – back then, they could still build durable, reliable cars. In any case, very little can go wrong here. Engine: OM 601, 4-cylinder naturally aspirated diesel with 79 hp. 5-speed manual transmission. 127 km/h is stated as the maximum speed. When the sliding door is opened, a large step extends mechanically. The vehicle was used by the fire department as an equipment carrier and has some shelving units that can be easily removed when not in use. Ibsdpew Tpfusfx Ad Njc Conversion manufacturer: Hermann Schmitz KG in 5901 Wilnsdorf near Siegen. Registered as a "Miscellaneous Motor Vehicle, Fire Department Vehicle." Unladen weight 2320 kg (including all fittings). Permissible total weight – original from the factory and unchanged to this day – 3500 kg. This means that this 308 D-KA can be driven immediately with the new passenger car driver's license. The special warning system has already been removed by the fire department before the sale and is no longer available. The vehicle runs very well; the transfer journey on the highway was a real pleasure. This offer applies only to commercial businesses and freelancers of any kind and industry, as well as to authorities / emergency services. Unfortunately, we do not sell directly to private end consumers. Subject to prior sale and errors. The purchase price is the final price, gross = net. Taxation according to §25a UStG (German VAT Act) as a municipal vehicle. Therefore, no 19% VAT will be added. At the same time, the VAT cannot be separately calculated from the purchase price.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Depositor for hot products, will connect to a cooking vessel and pump it into bags with set a weight which is adjustable Iodpfx Aoxgutped Njbc Air operated clipper to seal the bag Finished clipped bags can go into a tumble chiller to cool down. The machine is in good working order and ready for delivery Single phase electric 240 volts 50 Hz It needs an air supply

Condition: used, Year of construction: 2011, operating hours: 15,600 h, Equipment: all wheel drive, Caterpillar M313 D Engine: 102 kW / approx. 139 hp Air conditioning The machine is in good condition and ready for immediate use. Iodpfx Ajz Anahsd Nobc

Condition: used, axle configuration: 3 axles, first registration: 12/2008, suspension: air, tire size: 385/55 R22.5, tire condition: 40 %, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes Ijdpfezvdu Ujx Ad Nobc = More information = Year of construction: 2008 Tyre size: 385/55 R22.5 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Tyre profile: 40% Rear axle 2: Tyre profile: 30% Rear axle 3: Tyre profile: 30%

Condition: used, mileage: 321,049 km, power: 162 kW (220.26 HP), first registration: 09/2014, fuel type: diesel, tire size: 285/70/19.5, fuel: diesel, color: other, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,350 mm, total width: 2,240 mm, total height: 2,200 mm, Year of construction: 2014, Equipment: ABS, electric window regulation, fog lights, = Additional options and accessories = - Aluminum fuel tank - Speed limiter - Rear doors - Air suspension - Radio/CD player - Side doors - Sun visor - Stability control - Digital tachograph = Further information = Ibodpfxsz R Svco Ad Nec Tire size: 285/70/19.5 Brakes: Disc brakes Front axle: Suspension: Leaf spring suspension Rear axle: Suspension: Air suspension Unladen weight: 6,620 kg Damage: None License plate: 1JEX565

Condition: used, Year of construction: 2019, operating hours: 8,889 h, Equipment: all wheel drive, Tigercat LH822D, a modern tracked harvester (forestry machine). This machine is used in forestry operations to simultaneously fell, delimb, and crosscut trees—a so-called cut-to-length system. Tracked harvester manufacturer: Tigercat Industries Functions: Timber harvesting, delimbing, crosscutting (cut-to-length) Application areas: Forestry, including selective logging and salvage operations Dimensions & Weight * Length (without boom): approx. 5,180 mm * Width: 3,430 mm * Height: approx. 3,710 mm * Ground clearance: around 685–710 mm * Weight (without attachment): approx. 33,800 kg (ca. 74.6 t) * Tail swing radius: approx. 2,095 mm Drive & Performance * Engine: Tigercat FPT N67 (Stage V, Tier 4f, or non-certified) * Power: approx. 212 kW (284 hp) up to 217 kW (291 hp) at 2,200 rpm Drivetrain / Speed * Maximum speed (low range): approx. 1.6 km/h * Maximum speed (high range): approx. 3.4 km/h Isdpfoyawv Iex Ad Nebc Hydraulics & Controls * Main, harvester head, and cooling pumps: piston pumps; additionally, a transmission oil pump * Hydraulic oil reservoir: approx. 204 L Very good condition

Condition: used, mileage: 140,000 km, power: 70 kW (95.17 HP), first registration: 12/2017, fuel type: diesel, overall weight: 2,400 kg, next inspection (TÜV): 06/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2017, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, * Second-hand * Parking sensors * Electric windows * Electric side mirrors * Valid TÜV inspection until 2028/6 Special features: Isdpjz R E Scsfx Ad Njbc Airbag for driver/passenger side, exterior mirrors electrically adjustable and heated, floor covering: luggage/cargo area floor (PVC), lockable glove compartment, rear hinged doors with glazing, comfort seat front left, lumbar support for seat front left, cargo area partition (grille) FlexCargo, parking pilot system rear, front right seat back foldable Additional features: Storage compartment (above windshield), increased payload, body/superstructure: van, steering column (steering wheel) height adjustable, engine 1.3 L - 70 kW 16V CDTI, wheelbase 3105 mm, tire repair kit, low emission according to emission standard Euro 6, sliding door right, side protection strips black, seat cover/upholstery: fabric, steel rims 6x16, socket (12V connection) in center console.

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, We have a Buhrs W+D BB700 14K servo envelope inserting system available. DL up to C4 envelopes. This machine is built in 2007. Year of built 2007 6 station base Configuration: Mueller Apparatebau single sheet feeder / transactional channel Buhrs BB700 - 14K 6 station base 5 rotary feeders 1 HF3 vacuum friction feeder Divert bin Ijdpjzv T Auefx Ad Nobc Envelope station autoloader Conveyor belt This system is completely prepared for a Mueller transactional system for feeding/reading/collating/folding A4 documents. We do have multiple Mueller transactional system available as well. We can offer this optional. More and other feeders possible. Reading camera's for matching optional! Turnover module, alignment table and mailtable also available optional. Machine has just passed through our complete maintenance program. The machine is therefore 100% complete works like new. Please come over for a test if you like.

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation Isdpfszt Ai Esx Ad Njbc

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, We have a Buhrs W+D BB700 14K servo envelope inserting system available. DL up to C4 envelopes. This machine is built in 2007. Year of built 2007 6 station base Configuration: Mueller Apparatebau single sheet feeder / transactional channel Buhrs BB700 - 14K 6 station base 5 rotary feeders 1 HF3 vacuum friction feeder Ibsdpfx Adozv Tz Rs Njc Divert bin Envelope station autoloader Conveyor belt This system is completely prepared for a Mueller transactional system for feeding/reading/collating/folding A4 documents. We do have multiple Mueller transactional system available as well. We can offer this optional. More and other feeders possible. Reading camera's for matching optional! Turnover module, alignment table and mailtable also available optional. Machine has just passed through our complete maintenance program. The machine is therefore 100% complete works like new. Please come over for a test if you like.

Condition: used, Year of construction: 2012, operating hours: 10,381 h, 1 owner! German machine! Ijdpfx Adsz Shnks Nobc - Tel. WhatsApp:

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Dowel and long-hole drilling machine GANNER JUNIOR 320 LBM in very good condition, like new, the machine comes from a small carpentry shop and was used very little there it can be used to mill long holes and drill dowel holes in 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of construction: 1990 with this machine, you can mill long holes for, for example, lock housings and similar items, or create all types of frame dowel joints at right angles, flush, and mitered ideal for the production of dowel joints in timber frame construction, furniture, door, window, and stair construction, and for similar applications drilling on 2 levels, the grid and stops, and the design of the machine allow dowel joints to be produced in a very short time, which makes the machine very economical the machine requires a compressed air connection of 6 bar (air consumption is very low) Right-hand rotation mills and drills very well and cleanly with 2 angle stops (one center stop and one side stop, which can be used on both sides) 2 stop rails can be attached on the left and right, the stop rails are 1000 mm long, each with 2 folding stops the workpiece is clamped using 2 pneumatic clamping cylinders the height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures fast adjustment of grids and drilling levels with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right can be quickly converted for long-hole milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 420mm the max. borehole height is 100mm the max. borehole depth is 150mm with stop and scale the max. workpiece height is 160mm everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros, so you have no risk when purchasing; delivery to Austria and the EU is also possible on request the machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle professional equipment, not cheap hardware store junk you can start working with the machine immediately with 2 chucks up to 20mm very stable and durable construction the precision guides with the backlash-free ball bearing bushings are in good condition and move smoothly Iodpfez I Eggjx Ad Nsbc