Used Isal Pb120 D for sale (45,899)

Condition: used, machine/vehicle number: CT1133L70678, Year of construction: 2021, operating hours: 6,200 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 1,924 mm Fork length: 1,150 mm MACHINE DETAILS Battery year of manufacture: 08/2021 Battery voltage: 24 V Battery capacity: 375 Ah Battery voltage at rest: 25.3 V Dimensions & Weight Nwodpfx Aj Ad Rdiebrjn Dimensions (L x W x H): 2,500 x 800 x 2,200 mm Weight: 1,500 kg Service valid until: 03/2027 UVV (occupational safety) valid until: 03/2027 Operating hours: 6,200 h EQUIPMENT Initial lift Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 337

Condition: ready for operation (used), functionality: fully functional, operating hours: 7,035 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Linde Type: H20/600D EVO Year of manufacture: 2019 Operating hours: 7,035 h Drive type: Diesel Lifting Equipment Mast type: Duplex mast Lifting height: 4,250 mm Free lift: No Free-lift mast: Without central hydraulic cylinder Tilt angle indicator: Present Load capacity and forks Load capacity: 2,000 kg Fork length: 1,200 mm Side shifter: Present 3rd hydraulic valve: Present 4th auxiliary hydraulic valve: Present, free for fork positioner Nwsdpez R D A Hofx Abrsn Hydraulically adjustable forks: No MACHINE DETAILS Dimensions and weight Overall length: 4,100 mm Overall width: 1,200 mm Overall height: 2,777 mm Dead weight: 3,740 kg Maintenance and inspection Next service due in: 878 h UVV valid until: 03/2027 EQUIPMENT Full cabin Heater Windshield wiper Road traffic lighting with turn signals LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat Lumbar support Seat heating Formerly a Linde full-service machine All dimensions are approximate. No guarantee is given for typographical and measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of delayed collection, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 216

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Emcomat 17D, lead screw and pull spindle lathe, manufactured in 2013, from a vocational training workshop, CE compliant, in excellent condition!!! Technical data: >> Year of manufacture: 2013, Machine no. D4D 130601 >> Center height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed stages from 40-3000 RPM, infinitely variable >> Quill stroke: 120 mm >> Tailstock: MK3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Footprint / Dimensions approx.: Length 1,600 x Depth 0.9 x Height 1.3 meters >> Weight approx.: 750 kg Accessories and equipment: >> 3-axis position indicator >> 1 three-jaw chuck with 200 mm diameter and 1 set of jaws from Röhm >> 1 four-jaw chuck with 200 mm diameter and 1 set of jaws from Röhm >> 1 quick-change tool holder without collets >> Steel tool rest with 2 pockets >> Chip guard >> Coolant system >> Bed stop About the machine: Nwedpfx Ao Afxm Uobrjn Offered for sale is an Emcomat 17D, lead screw and pull spindle lathe, manufactured in 2013, in well-maintained condition. The machine is fully functional, of course. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to inspect this machine on-site while it is powered on and to convince yourself of its condition.

Condition: used, Year of construction: 2013, Ashton Industrial model AIS-3350/XDIA D Refurb Edge Detection Unit/Arriser. Serial no: 8343 (2013) Location: These lots are located in Wellingborough, Northamptonshire, UK Nwedpfx Ao Afwwgobrsn

Condition: good (used), Year of construction: 2001, operating hours: 20,900 h, functionality: fully functional, Channel baling press Paal Konti 275 D, year of manufacture 2001, with shredder and chain belt conveyor Paal KEM-1500, year of manufacture 2005 Technical data: Manufacturer Paal Type Paal Konti 275 D Year of manufacture 2001 Operating hours 20,900 as of 10/2026 Pressing force 75 t Nwsdpfx Ao Afwy Hjbrjn Total connected load 106 kW Feed opening 1020 x 1550 mm Bale dimensions 750 x 1100 mm, length variable Tying 4-way automatic Throughput at 35 kg/m³ approx. 12 t/h 60 kg/m³ approx. 21 t/h 100 kg/m³ approx. 33 t/h Bale weight 500 to 750 kg Transport dimensions approx. 11152 x 2152 x 2800 mm (LxWxH) Machine weight approx. 25,000 kg Type Paal KEM-1500 Year of manufacture 2005 Drive power: 5.5 kW Conveyor speed: 0.29 m/s Nominal width 1500 mm Axle distance 17500 mm Length of feed belt: approx. 10000 mm Length of rising section: approx. 9000 mm Gooseneck: approx. 1000 mm Inclination angle: 28° Materials: Paper, cardboard, light waste, plastic waste Note: The press is currently still in operation. Dismantling is planned for December 2026. An inspection under operating conditions is possible. The complete documentation including the CE declaration is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, prior sale is reserved and the offer can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment ex works, without any guarantee or warranty.

Condition: good (used), Year of construction: 2011, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, 4-axis machine X-axis travel: 650 mm Y-axis travel: 650 mm Njdo Afxqbspfx Abrjwn Z-axis travel: 680 mm Rotary table, swiveling: 360 degrees Operating hours: 55,000 h Tool holder: HSK 63 Spindle speeds: 20,000 rpm Torque at the spindle: 85 Table size: 400 x 500 mm Table load capacity: 0.5 t Chain magazine: 60 positions Chip conveyor Pallet changer Coolant filtration system High-pressure coolant through the spindle

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, machine/vehicle number: 03250551610001, arm reach: 900 mm, type of input current: three-phase, load capacity: 5 kg, control cabinet width: 440 mm, control cabinet height: 290 mm, overall weight: 200 kg, input voltage: 400 V, protection type (IP code): IP54, repeat accuracy: 0.02 mm, controller model: MC-05 Controller, wire diameter (max.): 1.8 mm, input current: 32 A, pivoting range: 360 °, warranty duration: 24 months, welding current (max.): 500 A, teach pendant model: Teach Pendant Serie MC, Equipment: CE marking, documentation/manual, type plate available, COBOT WELDING CELL METALSELF CI-05 + AOTAI 500A (EX-DEMO FOR TRADE SHOW) Turnkey collaborative welding cell. Demo unit (2025), only 12 hours of operation. Excellent cosmetic and mechanical condition, like new. Plug&Play solution ideal for flexible automation of small/medium-sized batches. Guarantees maximum precision and easy programming without the need for specific certifications. SOLD WITH A 40% DISCOUNT ON THE LIST PRICE. COBOT SPECIFICATIONS (ROBOT ARM) -Model: Metalself CI-05, Reach/Payload: 900 mm / 5 kg -Degrees of freedom: 6 axes (±180° range per joint) -Repeatability: ±0.02 mm -Protection / Weight: IP54 (industrial use) / 21.4 kg -Mobile magnetic base -Integrated transport trolley CONTROLLER & INTERFACE -Model: IIMT05-220/100 (220V, Single-phase power supply) -Programming: Color touchscreen Teach Pendant (IIMT-TP) Nwjdpfx Aezw Nvmsbron -Connectivity: TCP/IP, Modbus-RTU/TCP, 16 DI/DO, 4 AI/AO AOTAI AMIG-500PSR GENERATOR: Top-of-the-line inverter with dual 32-bit ARM processor. -Processes: MIG/MAG, High-efficiency pulsed MIG -Power: 500A at 100% (Duty cycle at 40°C) for intensive use -Power supply: 380V, Three-phase -Wire feeder: Double closed loop, permanent magnet motor SOFTWARE & ADVANCED FUNCTIONS INCLUDED -Drag-to-Teach: Quick programming by manually guiding the arm -Weaving/Swing: Oscillation for vertical welds/fill welds with programmable dwell -Multi-layer & Array: Repetition of passes and matrix (grid) welding -Trajectories: Support for linear, circular, spline, and tube (saddle) paths SAFETY -Integrated collision detection and adjustable sensitivity -Parking brakes on all joints active when power is off -CE compliance (EN ISO 13849-1 PL d) SALE AND SHIPPING -Machine status: Ready for delivery, viewable and testable at our location in Settimo Torinese (Italy). -Warranty: 24 months. -Documentation: CE declaration, cobot manual, welding package manual, in any language. -Shipping: EXW (Ex Works). Packaging and transportation costs are borne by the buyer (can be quoted separately upon request).

Condition: like new (used), Year of construction: 1998, functionality: fully functional, Swivel spindle milling machine VEMA TFMS 2-4 in very good condition, like new; the machine comes from a correctional facility and has only been idle for the past few years; it has been used very little and operated by only one person. Nwedpfs Afaugex Abren VEMA is a company from Northern Germany; the machine's design is similar to the KÖLLE F45 or the PANHANS 240. everything functions perfectly all bearings and guides are in good condition year of manufacture 1998 the machine has the control panel on top with a milling stop that can be adjusted on one side or completely in depth; this is possible with a handwheel in each case. For complete adjustment, there is a mechanical counter; the counter can be set to zero at any point by pressing a button, allowing the stop to be adjusted quickly and very precisely. both stop jaws can also be adjusted individually; there are also 2 mechanical counters, which allow for one-sided adjustment and also enable facing operations, for example, on a gluing profile. the milling stop can be rotated on the machine table the machine has an extra-powerful motor with 7500 watts with pneumatic spindle locking the chips can be removed very well, with 2 extraction ports 120mm with a 30mm spindle that can be adjusted steplessly from -10 to 45°; the spindle is adjusted by handwheel with a mechanical counter. with right/left rotation we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros; this means you have no risk when purchasing. Shipping to Austria and the rest of the EU is also possible upon request. with a large table opening that can be reduced by means of various rings; this means that milling cutters with a very large diameter can also be used, and you can also mill safely with small milling cutters (the rings are included, but they are not visible in the pictures). with 3000, 6000, 4500, 7500 and 9000 rpm the spindle height adjustment is also done by handwheel; here too, there is a very precise mechanical counter for reading the height. the table is made of highly ribbed cast iron with an interchangeable spindle (a 40mm spindle can also be used) very robust and durable design; the machine was built for the most demanding milling operations and is suitable for all milling operations. optimal power transmission through belt drive with instruction manual with 3-roller feed HOLZ HER ETX the feed has right/left rotation; the feed rollers are individually mounted and all are like new; it has 8 speeds the machine table is 1020mm wide and 980mm deep + 500mm wide extensions on the left and right the machine can be used immediately 380V, 7500W Weight: approx. 1000kg with all necessary safety devices; the machine is approved by the Holz-BG (German Wood and Furniture Employers' Accident Insurance Association). the machine weighs approx. 1000kg with motor protection switch against overload professional equipment, not cheap hardware store junk optimal, simple, fast and safe handling

Condition: used, axle configuration: 3 axles, first registration: 06/2007, color: other, Year of construction: 2007 Empty weight: 7.385 kg Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right 10 mm Nodpfx Ajxqn Hqsbrown We have the possibility to stack trailers!

Condition: used, Year of construction: 2013, functionality: fully functional, load capacity: 1,000 kg, total height: 850 mm, total length: 2,000 mm, total width: 1,100 mm, rotary table diameter: 900 mm, overall weight: 1,100 kg, height adjustment type: hydraulic, table load: 1,000 kg, disc diameter: 900 mm, product height (max.): 1,350 mm, faceplate diameter: 900 mm, workpiece weight (max.): 1,000 kg, plate diameter: 900 mm, Equipment: foot remote control, Max load: 1000 kg Table size: Ø900 mm Max. height with vertical table: 1350 mm to middle of table Rotation speed: 0.1 - 1.2 rpm Featured with: Wired remote control Nodpfez H Npisx Abrswn Country of origin: The Netherlands Motor power: 0,75 kW Machine (L×W×H): 200 x 110 x 85 cm Machine weight: 1100 kg

Condition: excellent (used), Year of construction: 2019, operating hours: 2,092 h, functionality: fully functional, machine/vehicle number: IT J320209, overall weight: 447 kg, total length: 1,935 mm, total width: 655 mm, total height: 1,680 mm, volume flow: 270.122 m³/h, operating pressure: 13 bar, pressure (min.): 5 bar, pressure (max.): 13 bar, noise level: 64 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, The compressor is in excellent condition!!! The electronics have been completely replaced!!! Only 2029 operating hours. Nodpfxsz Ah Uxj Abrjwn For sale due to downsizing of the machine park!!!!...Completely overhauled, including filter replacement.

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION Nodpfx Absxgua Ajrjwn • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 1044, Diosna SP 120 D spiral mixer/kneading machine 32 Ah connection with 2-hour timer, 2 speeds Nwodpfx Abjdc Eh Ajrjn on castors In excellent condition, operates quietly If you have any further questions, please contact us. Thank you in advance.

Condition: good (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: TCG51403A, number of ink cartridges: 4, total length: 4,200 mm, total width: 2,500 mm, total height: 1,500 mm, year of last overhaul: 2023, type of input current: three-phase, input voltage: 380 V, overall weight: 2,200 kg, working width: 320 mm, tank capacity: 5 l, used machine, dismantled Njdsttuiiepfx Abrswn

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 000000000000001, overall weight: 200 kg, load capacity: 5 kg, arm reach: 900 mm, pivoting range: 360 °, controller model: MC-05 Controller, teach pendant model: Teach Pendant Serie MC, control cabinet width: 440 mm, control cabinet height: 290 mm, input voltage: 400 V, input current: 32 A, type of input current: three-phase, repeat accuracy: 0.02 mm, warranty duration: 24 months, wire diameter (max.): 2 mm, protection type (IP code): IP54, welding current (max.): 500 A, Equipment: CE marking, documentation/manual, type plate available, METALSELF CI SERIES COLLABORATIVE ROBOT CELLS – WELDING AND FLEXIBLE AUTOMATION Njdpfxszxhmye Abrjwn ⚠️ CURRENT PROMOTION: Contact us to discover the exceptional discounts currently available on the entire Metalself cobot range! We offer "Plug & Play" collaborative production cells, customizable to your specific needs with the entire Metalself CI Series cobot range. A smart and scalable investment that combines the precision of robotics with human flexibility, with a rapid return on investment thanks to significantly lower operating costs compared to traditional robotics. INTEGRATED WELDING PACKAGE Our cells are designed with native and optimized integration for welding processes (MIG/MAG, TIG, Laser). Supplied complete with intuitive proprietary software, they can compensate for the shortage of specialized welders. -Drag-to-Teach: Quick programming by manually guiding the arm in "zero-gravity" mode. -Advanced functions: Weaving (for vertical welds), multi-layer welding for deep joints, and Array function for matrix welding on component tables. ONE ROBOT, ENDLESS APPLICATIONS Metalself cobots are not limited to welding. Thanks to the open architecture (LUA, C/C++, Python, ROS languages) and the integrated I/O interface, the same machine can be reprogrammed in just a few minutes for over 200 industrial scenarios. Purchasing a Metalself cobot means having an tireless operator for: -Machine Tending: Automatic and continuous loading and unloading of metal or plastic components on CNC machining centers, lathes, and presses. -Palletizing and Logistics: Transfer of materials, packaging, and stacking of boxes at the end of the line 24/7 (ideal with the CI-16 and CI-20 models). -Screwing and Assembly: Micro-precision operations for the automotive and electronics (3C) industries, interfaceable with machine vision systems. THE COMPLETE RANGE (From 3 kg to 20 kg) We configure your cell by choosing the perfect cobot for your requirements: * CI-03: Payload 3 kg / Reach 600 mm * CI-05: Payload 5 kg / Reach 900 mm * CI-10: Payload 10 kg / Reach 1300 mm * CI-16: Payload 16 kg / Reach 1000 mm * CI-20: Payload 20 kg / Reach 1650 mm SAFETY All models are equipped with advanced collision detection and 5 safety functions that comply with EN ISO 13849-1 (PL d) regulations. They work in close proximity to personnel without the need for expensive and bulky perimeter fences, with full CE certification. DELIVERY TIMES AND QUOTES * Supply times: Cells are manufactured and delivered in 40-50 working days. Request a personalized quote: contact us, explaining your application (welding, machine tending, palletizing). Our technicians will configure the cell to your specific needs, selecting the ideal arm and necessary accessories, and applying the current promotional discount.

Condition: good (used), Mohr D 80 ECO Polar Guillotine Manufactured in 2012. Very good condition, ready to operate. Mohr Polar is the most recognizable and respected brand of bookbinding guillotines in the world. Made in Germany. Working width: 800mm Stack height: 100mm Nedpfx As Af E Hhsbrjwn Machine weight: 1000kg Power supply: 380V Equipment: Programmer with a 5.5″ display and the ability to save 198 programs Chrome-plated table Air table Photocells Intuitive operation Documentation, tools, spare blade, and a safety blade change tool.

Condition: good (used), functionality: fully functional, mileage: 163,067 km, power: 115 kW (156.36 HP), first registration: 02/2012, fuel type: diesel, maximum load weight: 3,660 kg, overall weight: 7,490 kg, axle configuration: 4x2, next inspection (TÜV): 01/2027, fuel: diesel, brakes: engine braking, color: blue, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: steel, number of seats: 3, loading space length: 4,050 mm, loading space width: 2,500 mm, loading space height: 1,950 mm, Year of construction: 2012, Equipment: ABS, airbag, parking heater, power assisted steering, soot filter, truck registration, MB 816 D Vario flatbed with tarpaulin, first owner, only 163,067 km, engine brake, differential lock on rear axle, auxiliary heater, electric windows and mirrors, 6-speed transmission, 3 seats, driver airbag, 7.49 t gross vehicle weight, 3.66 t payload, flatbed 4.05 m long, TÜV (technical inspection): 01/2027, for sale only to businesses and for export, errors, changes and prior sale reserved. Nedpfs Afw Azsx Abrewn

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 12,199 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,730 mm, fork length: 1,600 mm, drive type: Diesel, Diesel forklift Mast type: Standard Condition: Ready for use and fully functional Technical condition: Normal Front tire type: Superelastic Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire condition: 60 - 80% Nedpfx Abjz El A Norewn Side shifter, fork positioner, 3rd valve, 4th valve, partial cabin

Condition: excellent (used), Felder D 951 – Thickness planer, 500 mm planing width Manufacturer: Felder Model / Type: D 951 Nwsdpfx Abj Aa Avisren Year of manufacture: 2011 Technical data and equipment * Planing width: approx. 500 mm * Planing height: approx. 250 mm * Motor power: 5.5 kW * Number of planing knives: 4 * Infinitely variable feed rate adjustment * Feed rate: 4–16 m/min

Condition: ready for operation (used), Year of construction: 2021, clamping force: 2,700 kN, overall weight: 10,700 kg, Vertical injection moulding machine manufactured in 2021. This Kloeckner Desma D 969.250 Z (S3) features a clamping force of 2700 kN and an injection volume of 500 cm³. The machine is equipped with a high-pressure injection unit and a touch-operated control system for process monitoring. If you are looking to get high-quality injection moulding capabilities, consider the Kloeckner Desma D 969.250 Z (S3) machine we have for sale. Contact us for further details. Nwedpfx Abo Ad Inlsrsn - Clamping Force: 2700 kN (300 US tons)- Injection Volume: 500 cm³- Injection Unit Type: B500HP (High Pressure)- Injection Pressure: 3500 bar- Nozzle Contact Force: 58 kN- Control System: 2030 TBM (Touch operation / process monitoring)- Operating System Status: Active 3,360 hours- Operating Hours (Hydraulic Motor): approx. 730 hours- Operating Hours (Hydraulic Pump - Clamping Force): 65 hours- Total Current: 138 A- Recommended Backup Fuse: 160 A- Supply Cable Cross-Section: 70 mm² Cu- Voltage: 3~400 V +N +PE- Frequency: 50 Hz- Max. Short-Circuit Current: 10 kA- Total Machine Weight: approx. 10.7 t (10,700 kg) (Clamping Unit + Hydraulic Unit: 9,700 kg; Injection Unit: 1,000 kg)- Footprint: 10 m²- Total Floor Load / Ceiling Load: 1,070 kg/m²- Foot Area / Floor Contact Area: 2,010 cm²- Specific Ceiling Load: 5.3 kg/cm²- Hydraulic Oil Tank Volume: 450/130 l- Temperature Control Medium Tank Volume: 2x7 l- Compressed Air Pressure: 6 bar- Compressed Air Flow: 0.5 m³/h- Cooling Water Flow: 1.6 m³/h- Cooling Water Inlet Temperature: max. 20 °C at 2.5 bar- Cooling Water Connection: 22-L- Pump Power / Rated Power: 22 kW (28.6 hp)- Pump Current Consumption: 32.0 A- Pump Pressure: 265 bar- Pump Flow Rate: 72/39 l/min- Maximum Mold Width: 560 mm- Maximum Mold Length: 780 mm- Platen / Stroke Dimensions: 600 mm stroke, platen distance 1480 mm, clamping stroke details 710 mm- Heating Plate Center Bore / Ring Size: Ø80 H9- Enclosure Type (UL): 1

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Depositor for hot products, will connect to a cooking vessel and pump it into bags with set a weight which is adjustable Air operated clipper to seal the bag Finished clipped bags can go into a tumble chiller to cool down. The machine is in good working order and ready for delivery Single phase electric 240 volts 50 Hz It needs an air supply Nsdexgutpjpfx Abrjwn

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital display, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE compliant!! Technical specifications: Year of manufacture: 2006 Model: EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MT 2 Quill stroke: 80 mm Dimensions Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe for the highest demands: with stepless speed control, constant cutting speed and an impressive 7.5 kW drive power (40% duty cycle). This compact machine with outstanding performance is ideal wherever maximum precision is required in limited spaces, such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is an EMCO EMCOMAT 14 D lathe with Emco digital display, year of manufacture 2006. This lathe is in excellent original condition and comes from a facility where it was only used occasionally for special applications. The control system is very user-friendly. The guideways are lubricated regularly by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power at our premises. Nodpfx Aoxyvaqebrjwn You will find more lathes from renowned manufacturers on our website.

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Nwodpfx Ao Aduyhobron TECHNICAL DETAILS GENERAL INFORMATION Manufacturer: Eisele Type: LMS III-D Machine number: 3.028 Year of manufacture: 1975 Machine type: Metal circular saw ELECTRICAL DATA Operating voltage: 220–380 V DRIVE Speed: up to 2,800 rpm TOOL Grinding wheel diameter: 250 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 700 mm Width: 500 mm Height: 1,000 mm Weight: 150 kg

Condition: ready for operation (used), Philips 4022 228 3061 / D004183 KEYBOARD INTERFACE CARD, condition: D / 2, used, good condition, 100% functional, scope of delivery as shown in the photos. Nwjds Af Efkepfx Abrjn

Condition: used, mileage: 689,579 km, power: 100 kW (135.96 HP), first registration: 03/2014, fuel type: diesel, next inspection (TÜV): 10/2027, color: black, gearing type: automatic, emission class: euro5, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * 5,200 EUR * Volvo S80 D3 2.0 Diesel Kinetic Geartronic Automatic Navigation PDC Climate Control Leather Euro 6 * Seats: 5 (2+3) * Automatic transmission * Radio/CD * Lumbar support * Leather steering wheel * Navigation system * Touchscreen * Traction control * Automatically dimming interior mirror * Speed limiter * Front, side, and additional airbags * Cruise control * Ski bag * Distance warning * Seat heating * Automatic climate control * Hands-free system * Multifunction steering wheel * On-board computer * Bluetooth * Rain sensor * Tire pressure monitoring * USB * Emergency call system * Emergency brake assist * Electric windows * Electric mirrors * Central locking * Tire pressure monitoring * Traction control * Touchscreen * Isofix * ABS Nwodps Adndtefx Abrjn * ESP * Start/Stop automatic * Alloy wheels * Fog lights * Rear parking assist (PDC) * Full leather * Wheelbase: 284 cm * Unladen weight: 1531 kg * Payload: 669 kg * Weight: 00 kg * Passenger car registration * Vehicle No.: 42 OPENING HOURS Monday - Friday from 9:00 AM to 5:00 PM (by appointment only...) CONTACT DETAILS Telephone: WhatsApp: E-mail: Transit and customs license plates (export number) available from us. Errors, typos, and prior sale are subject to change. Technical specifications and features should be checked separately. The condition as per the contract is only the one that is inspected on site and guaranteed in writing at the time of purchase. Please arrange an appointment...