Used Isal Sm50 for sale (23)

Condition: used, Year of construction: 2016, operating hours: 2,012 h, The Isal PB 106 E is a practical ride-on sweeper that makes sweeping fun. This electric machine is operated by means of a throttle lever on the handlebars (just like on a motorcycle) and drives exceptionally smoothly through corners. The direct sweeping system ensures that the brush lasts a long time and little dust is raised while sweeping. After sweeping, you manually empty the 64 L trash can into the bin. This is a machine ideal for medium to large indoor areas, and thanks to the left and right side brushes, you'll sweep past racks, pallets and other obstacles with ease. It is made of a sturdy sheet steel chassis, making it able to withstand a good deal. All parts are also easily accessible, making it easy to perform maintenance. The Isal PB 106 E is very user-friendly and can be used by anyone on the shop floor. Other specifications: - Theoretical capacity: 6,500 sq. ft, - Sweeping width of main brush: 70 cm, - Sweeping width with 1 side brush: 90 cm, - Sweeping width with 2 side brushes: 105 cm, - Battery working time: 3 hours, - Power source: 24 V, - Dumpster capacity: 64 L, - High-loss system: No, - Traction on: rear wheels, Pedpfx Aenyir Eoahsgg - Maximum speed: 6.2 km/h, - Maximum slope angle: 14%, - Filter type: panel filter, - Filter surface area: 3.5 m², - Weight (without batteries): 221 kg, - Weight (with batteries): 478 kg, - Dimensions (LxWxH): 140 x 92 x 123 cm, All our used cars come standard with: - Complete service, - New brushes, - New battery pack, - Free on-site delivery, - New wear parts and rubbers, - Service and overhaul, - Explanation and instruction, - Brushes and accessories tailored to your floor. Would you like to know more about the Isal PB 106 E sweeper? Then contact us, we will be happy to tell you more about it.

Condition: good (used), Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor -Manufacturer: SEW-Eurodrive, Servomotor Permanent Magnet Motor -Type: CFM71L/TF/RH1M/SM50 -Speed: 0 - 3000 rpm -Voltage: 400 V -Shaft: Ø 19 x 35 mm -Technical data: see photo of the type plate -Number: 3x servo motors available Psdpfx Asm Sk Hveahsgg -Price: per piece -Dimensions: 350/117/H190 mm -Weight: 11.8 kg/pc.

Condition: ready for operation (used), SEW Eurodrive PSE311 / R / EK04 + CM71S / TF / RH1M / SM50 servo motor with gearbox, SN011229434704000308 ,used, small traces of use, 100% functional, scope of supply according to photos Pgedpfx Aei D N Rfsahsg

Condition: ready for operation (used), SEW Eurodrive CFM71S/TF/RH1M/SM50 SN:01.1229434704.0001.08 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos, For this item, the agreed sales discounts do not apply. Price please ask separately! Podpfxoi D N Nzs Aahegg

Year of construction: 1979, condition: good (used), 3-jaw chuck Multifix tool holder device tail stock Technische Daten / technical details: Drehlänge / turning lenght 1000 mm Dreh-Ø über Bett / turning Ø over bed 520 mm Dreh-Ø über Schlitten / turning Ø over sledge 300 mm Pgedpfx Asnqy Hajahsg Drehzahlbereich / spindle speed 30-1600 UpM /rpm Gewicht der Maschine ca. / weight 2500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Cloth lapper, polishing wheel, grinding wheel -Cloth lapper with abrasive fabric: grain 220 Pedpfx Aeb A S N Eeahjgg -Diameter: Ø 160 mm - Width: 30mm -Intake: Ø 10 mm -Number: 8x brushes available -Price per piece -Weight: 0.4kg/pcs

Condition: excellent (used), Cloth rag, polishing wheel, grinding wheel -Diameter: 160 mm -Width: 25 mm -Hole: Ø 40 mm Pjdpfx Ajb A Ilpoahegg -Number: 12 brushes available -Price: per piece -Weight: 0.7 kg/piece

Condition: excellent (used), Cloth rag, polishing wheel, grinding wheel -Cloth rag with abrasive fabric grit 220 -Diameter: Ø 160 mm Podpfsb A Nnksx Aahjgg -Width: 40 mm -Hole: Ø 30 mm -Number: 6 brushes available -Price: per piece -Weight: 0.4 kg/piece

Condition: used, Cloth lapper, polishing wheel, grinding wheel Pgedpeb A S Ryofx Aahjg -Cloth lapper with abrasive cloth: grain 220 -Diameter: Ø 160 mm -Width: 30 mm -Take: Ø 50 mm -Number: 7x brushes available -Price: per piece -Weight: 0.3 kg

Condition: used, centrifugal pump, water pump, submersible pump -Manufacturer: Schmalenberger, centrifugal pump type SM 50-13/2 -Flow rate: 21 m³/h -Pressure: 2 bars -Motor power: 2.2 KW Pjdsi Sdggepfx Aahsgg -Speed: 2840 rpm -Pipe connection: see pictures -Dimensions: 590/245/H440 mm -Weight: 56kg

Condition: good (used), Linear drive, linear gear, lifting gear, spindle drive, linear axis, toothed belt axis Pgsdpeud Ut Aofx Aaheg -Manufacturer: IAI, linear actuator type ISA-LXM-I-400-20-1100-T2-X15 -Stroke length: 1100 mm -Number: 1x linear drive available -Dimensions: 1470/165/H95mm -Weight: 25 kg

Condition: new, The RSM 500 A, a powerful Conventional Cylindrical Grinder from KNUTH, is built to deliver exceptional grinding performance with its robust design and excellent rigidity. Featuring a premium cast-iron machine frame, this grinder ensures optimal conditions for achieving superior grinding results. The machine is equipped with finely adjustable hydraulic feeds that operate smoothly in the longitudinal direction, and a swiveling table allows for precise taper grinding. With a maximum grinding diameter of 200 mm and a grinding length of 500 mm, it caters to a variety of applications. The headstock can rotate 180 degrees for internal grinding, while the hydraulic tailstock, with foot switch operation, enhances efficiency during setup and workpiece exchanges. Standard equipment includes a 2-axis position indicator, internal grinding equipment, and a comprehensive accessory package. Invest in reliability and precision for your grinding needs—request a quote for the RSM 500 A today, a leading choice in the Conventional Cylindrical Grinder category within the Grinding Machines sector. Pgjdpencdx Nofx Aahsg

Condition: used, axle configuration: 3 axles, first registration: 02/2008, color: other, Year of construction: 2008, Empty weight: 5.400 kg Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers! Pgjdpsw I Apvsfx Aahsg

Condition: used, axle configuration: 3 axles, first registration: 11/1997, total width: 2,500 mm, wheelbase: 9,510 mm, Year of construction: 1997, Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Unladen weight: 7,880 kg Payload: 31,120 kg Podjx Thfbepfx Aahjgg Gross Vehicle Weight: 39,000 kg Please contact Bastien Begemann or Corné Visser for further information.

Condition: used, Year of construction: 1995, Bezner Screening Machine | Oscillating screen Type BSM-50/1750W reinforced version Screening machine especially for use with mixed construction waste (commercial waste, mixed construction waste) Used, very good condition - Make: Bezner - Type: BSM-50/1750W - Year of construction: 1995 - Condition: very good condition (used) - Screening capacity: up to approx. 50 - 70 m³/h (for mixed construction site waste (commercial waste, mixed construction waste)) - Screening area: approx. 6.0 m² (approx. 2.2 m² with D = 8 mm // approx. 2.2 m² with D = 25 mm // approx. 1.5 m² with D = 25 mm) - Fractions: 4 - Screen decks: 1 piece Pedpfx Ajw I E H Reahegg - Screen extraction side: upwards - Drive power: 5.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 7,800 kg - Machine color: RAL 2001 red-orange Suitable for screening the following bulk materials, among others: - Mixed construction site waste - Recycling material - Commercial waste - Mixed construction waste

Condition: ready for operation (used), Bosch ASM 50-T / supply module serial number: 648519, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please price separately Pgodpfx Astvctbjahog

Condition: good (used), Year of construction: 2006, functionality: fully functional, center height: 100 mm, workpiece weight (max.): 35 kg, grinding length: 500 mm, grinding diameter: 125 mm, overall weight: 1,800 kg, input voltage: 400 V, For sale: 1 used grinding machine. Manufacturer: Knuth Werkzeugmaschinen GmbH. Model: RSM 500. Year of manufacture: 2006. Technical data: Centre height: 100 mm; Max. grinding diameter: 125 mm; Distance between centres: 520 mm; Max. grinding length: 500 mm; Max. workpiece weight: 35 kg; Internal grinding diameter: 10 - 40 mm; Internal grinding depth: 50 mm; Spindle taper: MK4; Tailstock: MK2; Weight: 1,800 kg. Documentation available. The machine can be inspected at our warehouse in 09599 Freiberg. Pgodpfx Aaoxzrvwehsg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, CFS VSM 500 - Vacuum Cutter Pgjdpfsxyrc Uox Aahog Brand: CFS Model: VSM 500 Year of manufacture: 1992 Capacity: 500 l The CFS VSM 500 vacuum cutter is an advanced industrial machine designed for cutting, mixing, and emulsifying materials under vacuum conditions. With its large 500-liter capacity, it is an ideal solution for processing substantial quantities of raw materials in production facilities.

Condition: used, Year of construction: 2007, power: 7 kW (9.52 HP), FOR SALE / FOR RENT: VERTICAL BALER! (Rental available in Lithuania, Latvia, Estonia, and Poland) Psdpexuqkmsfx Aahegg Technical specifications: Manufacturer: HSM Model: HSM 500 VL Pressing force: 54–540 kN Bale size: 1200 x 800 x 1200 mm Bale weight: approx. 500 kg Max. bale size: approx. 1200 x 800 x 1200 mm (W x D x H) Press chamber dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Year of manufacture: 2005 PRICE ON REQUEST!

Condition: ready for operation (used), functionality: fully functional, The frames of the RSM series machines have a heavy-duty design and long, supported guides. The table can rotate and the precisely adjustable hydraulic feed moves smoothly in the longitudinal direction. Pedpfx Aeri Ngyjahjgg WORKING AREA Height point 135 mm Workpiece length 640 mm Grinding length 500 mm Grinding diameter 8 mm - 200 mm Inside diameter without support 25 mm - 100 mm Workpiece weight between centers (max.) 50 kg Internal depth 125 mm Table miter cuts (max.) -3° / +9° R / L Peripheral speed 38 m/s DIMENSIONS AND WEIGHTS Grinding disc dimensions400 mm x 50 mm x 203 mm Grinding wheel internal dimensions (max.)50 mm x 40 mm x 16 mm Grinding disc dimensions (min.)45 mm x 35 mm x 10 mm Dimensions (length x width x height)2.5 m x 1.6 m x 1.5 m Weight 2500 kg

Condition: used, DIGI SM-5500BS Counter Scale | With Receipt Printer & Large Display | Excellent Condition For sale: Professional retail scale – DIGI SM-5500BS Ideal for butcher shops, cheese stores, fresh produce shops, markets, and other food retail applications. 🔧 Specifications: Brand: Digi Model: SM-5500BS Max. weighing capacity: 6 / 15 kg Pedpfxev Tcv As Aahjgg Minimum weighing: 40 grams Accuracy: by 2 / 5 grams Equipped with: Built-in receipt printer Large, bright customer display Functional keyboard Dimensions (W x D x H): 38 x 42.5 x 60 cm Power supply: 230V – plug and play 🟢 Condition: Well-maintained Fully operational Ready for immediate use Freely programmable 📦 Price on request / excl. VAT and shipping 📍 Location: Meppel 📞 For more information or viewing: Caspar Hermeler

Year of construction: 1994, condition: ready for operation (used), Working pressure working chamber/ double jacket: 2.5/2bar, with documentation and accessories, on-site inspection is possible, videos not available. Pgsdpjrp E Ncefx Aahsg

Condition: used, WELDCLAD submerged arc welding system for cylinder coating No. 02 independent welding lines No. 02 submerged arc welding systems No. 02 LINCOLN welding sources mod IDEALARC DC 1000 (output 150 – 1300 A – NOMINAL POWER 1000A/44V/100%) Pjdpjtq At Usfx Aahogg No. 01 command pulpit with no. 02 independent government units No. 02 positioned for rollers with a diameter of approximately 500 x approximately 4000 mm, capacity 4000 kg Sand supply system for submerged arc welding