Used Isal Pb115 B for sale (5,937)

Year of construction: 2005, condition: good (used), Sanyo SPW-XDR94GXH56(B) Variable Refrigerant Flow Semi Concealed 4-way air discharge Capacity : Cooling :2.80kw Heating 3,20kw Air-circulation (High) 900 phase 1. 50Hz Voltage rating (AVR) V 230 Running amperes 0.21 0.18 A Power input 0.032 0.022 watt Power sound level (H/M/L) dB-A Lhodpfxod Tw T Ne Abken Ref.dia. Narrow/Wide Pipe 6.35 (1/4) / 12.7 (1/2) Weight 21+4,5 kg Indoor Unit H/W/D mm 265 x 840 x 840 Panel H/W/D mm 291 x 950 x 950 • Sirocco fans and heat exchanger fins with new shapes are adopted and the operating sound could be reduced by max 6 db (A)! • Wide reduction of the power consumption by adoption of newly developed DC fan motors with variable speed, new heat exchangers • Easy fine adjustment of the body suspension height • Discharge opening and flap with new shape • A drain height of approximately 85 cm from the ceiling surface • Easy servicing of the drain pan We have 6 pc on Stock!

Condition: used, mileage: 188,000 km, power: 162 kW (220.26 HP), first registration: 10/2011, overall weight: 10,500 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, loading space volume: 26 m³, loading space width: 2,480 mm, loading space length: 5,240 mm, loading space height: 2,000 mm, Year of construction: 2011, total width: 2,550 mm, total height: 3,280 mm, Equipment: ABS, tail-lift, * Replacement engine 95,000 km with invoice * Orten Kettliner swing wall body * Dekra certified according to VDI 2700 ff and DIN EN 12642 Code XL Lhsdpfxsxnfute Abken * Beverage certificate * Cask beer certificate * 2 rows of load securing * 2,000 kg Bär tail lift * Short cab * Air suspension * Cruise control * Currently registered at 7,490 kg.

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 + in stips / lippings (max mm 1) Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Ljdpfxoxggzle Abkehn Hogging Units (2 x Kw 6,6) Max 35 m/min Milling unit (Joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) VTG 3-24 + 283.203 Pressure zone + Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B (2 x Kw 0,66) 30 m/min (0°-25°) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min OPTIONAL: KFA 30 Profile Scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.604 (Kw 0,25 x 4) No. 2 Grooving units 08.190 (1 x Left-hand + 1 x Right-hand) (Kw 4,5 x 2) swivelling 90°/180°/270°

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 4984, Bridge saw with manual rotary table Tilting table approx. 3000 x 2000 mm Laser Fast measurement electronics Blade diameter max. 650 mm (cutting depth approx. 210 mm) Ljdpexmvh Uefx Abkehn Mitre cut 0-45°

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station Ledpot Rmhaefx Abkohn - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: good (used), Busch B+P Ram punch, label die cutter A professional machine made in Germany. Very good condition. The Bush company is a leader in the production of pallet turners and pushers. 100% efficient, ready for production. This is the currently produced model. Technical data: Lodpoxddh Rjfx Abkehn Max. format 230 x 230 mm Number of cycles 13/min Max. input 170mm Efficiency 780,000 sheets/h Weight 860kg The machine has a hydraulic quick-acting unit. Clamps for mounting dies, axial adjustment of dies. Feed table adjustable in every plane. Two operating modes: semi-automatic, manual. Tail on the delivery.

Condition: used, Year of construction: 1996, plate thickness 6.0 mm ST thickness at "Niro-steel" 4.0 mm plate thickness 8.0 mm ALU angle adjustable from - to 30 - 140 Grad table: 950 x 890 mm blade length 220 x 220 mm stroke 35 H/min work height max. 1150 mm total power requirement 3.0 kW weight 800 kg range L-W-H 1200 x 1200 x 1400 mm New price approx. 20.000 euros Special price on request - in checked condition - machine video - ?v=QmUbaV41BfA Equipment: - electro-hydraulic notching machine * ??with adjustable angle 30° – 140° - cutting capacity up to 6.0 mm sheet thickness (R42/mm2) - made of the special spheroidal cast iron GS500. - the cutting movement takes place from top to bottom - robust work table made of steel with conical grooves * which ensure optimal adhesion of the stop angles - the scales are embossed - automatic cutting gap adjustment (patented) - system for the automatic adjustment of the gap Lhjdpfx Abjxabx Eeksn * between the upper and lower knives * for simultaneous cutting of different thicknesses - 2x angle-adjustable locking stops - finger protection made of plexiglass - 1x freely movable foot switch - waste chute, side - load hook for easy transport - operating instructions (PDF)

Condition: used, mileage: 188,000 km, power: 162 kW (220.26 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, overall weight: 7,490 kg, first registration: 10/2011, loading space length: 5,240 mm, loading space width: 2,480 mm, loading space height: 2,000 mm, loading space volume: 26 m³, emission class: euro5, color: white, Year of construction: 2011, total width: 2,550 mm, total height: 3,280 mm, Equipment: ABS, tail-lift, * Replacement engine 95,000 km with invoice * Orten Kettliner swing-wall body * Dekra certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Draft beer certificate Ledpfx Absxnfumskjhn * 2 rows of cargo securing * 2,000 kg Bär tail lift * Short cab * Air suspension * Cruise control * Upgradable to 10,500 kg gross weight, payload then 4,165 kg

Condition: excellent (used), Year of construction: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 35-30:B Application for PE, PP Year of manufacture 2006 Screw diameter 75 mm Drive Baumüller 171 KW RPM 2,450 Total output approx. 850 kg/h The extruder was converted to frequency drive by Battenfeld in 2014, new three-phase motor and frequency converter Gearbox was overhauled in July 2024 Condition: it is in very good condition Last application PE pipes Battenfeld co-extruder BEX 1-35-30:B Application PE PIPES Connection value: 69 Kva Output approx. 110 kg/h Year of manufacture: 2010 Lhedpfxoug Edkj Abksn The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Germany

Condition: good (used), axle configuration: 3 axles, wheelbase: 8,980 mm, loading space length: 13,320 mm, loading space width: 2,490 mm, loading space height: 2,590 mm, first registration: 04/2016, suspension: air, color: white, tire size: 385 / 65 / R22.5, Year of construction: 2016, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: BPW EcoPlus Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Measures Dimensions (LxBxH): 1404 x 260 x 400 cm Weights Empty weight: 8.789 kg Lhedpexfl Ihsfx Abksn Carrying capacity: 32.211 kg GVW: 41.000 kg Functional Make of bodywork: Krone Coolliner Carrier Vector 1950 Cooling engine: diesel and electric (2234 operating hours diesel; 516 electric) Wall thickness: 5 mm Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, Year of construction: 2003, Perfect binding line Consisting of Gathering machine Kolbus ZU 841.B Year: 2003 Description: Ledpjv N U U Njfx Abkjhn - Hand feeding station: 1 - Number of gathering stations: 21 - Optical sheet control Reverse feeder Card gluer - Hotmelt glue unit: Nordson Problue 4 - Air center: Becker VariAir, 2005 - Set up element - Reject gate for incomplete products: AS 841 - Transfer into the binder Perfect binder Kolbus KM 410.B Year: 2003 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Robatech ICS C 160 - PUR spine gluing unit, interchangeable (nozzle): EP 48V, 2008 - PUR premelter for PUR spine glue unit: Nordson DuraDrum DK 200, 2008 - Hotmelt side glue unit, interchangeable: 3 mm - Premelter for side glue unit: Robatech ICS C 30 - Stream cover feeder: Non Stop - Na 400.B - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Description updated

Year of construction: 2012, condition: ready for operation (used), A Climaveneta chiller is available. Cooling capacity: 73.8kW, power consumption: 27.6kW, compressors: 2, refrigeration circuits: 1, refrigerant: R410A, refrigerant charge: 10.2kg, heat recovery: cooling capacity 76.6kW/heating capacity 23.3kW. Machine dimensions X/Y/Z: approx. 2200mm/1150mm/1450mm, weight: approx. 680kg. Documentation available. An on-site inspection is possible. Lodpsxc Nh Tsfx Abkjhn

Condition: used, first registration: 03/2012, color: other, Year of construction: 2012, Equipment: ABS, tail-lift, = Additional options and accessories = - BPW-Assen - Cooling engine = Remarks = HFR trailer, 2012, BPW axles, Thermoking Cryotech CT10 cooling, Webasto heating, Multitemp, 2000 kg tail lift, Partition wall easy to remove = More information = Lsdpfx Abexb Uhpekehn Tail lift: tail lift, 2000 kg = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, mileage: 188,000 km, power: 162 kW (220.26 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 10/2011, loading space length: 5,240 mm, loading space width: 2,480 mm, loading space height: 2,000 mm, loading space volume: 26 m³, emission class: euro5, color: white, number of seats: 2, Year of construction: 2011, total length: 7,260 mm, total width: 2,550 mm, total height: 3,280 mm, Equipment: ABS, soot filter, tail-lift, * Replacement engine 95,000 km with invoice * Orten Kettliner swing wall body * Dekra certified according to VDI 2700 ff and DIN EN 12642 Code XL Lhedpfsw Sbuljx Abkon * Beverage certificate * Cask beer certificate * 2 rows of load securing * 2,000 kg Bär tail lift * Short cab * Air suspension * Cruise control * Currently registered at 7,490 kg.

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, Complete tea bagging and packaging equipment. The option of sealing the filters without glue or metal staples makes it perfectly suitable for packaging herbal teas. Lhedpfsxdmcwsx Abksn The complete system consists of 3 machines, with the main components replaced in 2023. The equipment was manufactured in 2011 and has been out of operation for about a year. It can be inspected in operation, in its industrial environment, in Budapest. Please see the attached document for further information and data.

Condition: used, Panel turning device used for loading and unloading panels. Working dimensions: Lodpfx Aberzhfdjkehn * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: from transverse to longitudinal This device is commonly used in the wood and furniture industry to facilitate the movement of panels during processing. If you have any further questions or need further details, please don't hesitate to ask!

Condition: used, axle configuration: 3 axles, first registration: 08/2007, color: other, Year of construction: 2007, Empty weight: 5.350 kg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm Lhsdpfsw Tatijx Abksn We have the possibility to stack trailers!

Condition: excellent (used), functionality: fully functional, TOMESANI T45/B Edge Sander Ledpjxb D Acofx Abkohn Specification: • Condition – used • Manufacturer – TOMESANI • Model – T 45/B • Working height – 150 mm • Left/right rotation • Tables measuring 17 x 144 cm and 27 x 120 cm, extendable • Rotating sander body • Motor power – 2.5 HP • Mechanical belt tensioning and oscillation • Own integrated sawdust extraction • Weight – approx. 250 kg • Overall dimensions: 145 x 85 x 120 cm (L x W x H) Additional information: • Very good factory technical and visual condition • The provided photos show the actual condition of the item for sale • Possibility to power up and test the machine on-site

Condition: used, TECHNICAL DETAILS - number of spindles : 8 - number of turning slides : 8 - number of longitudinal stations : 8 - maximum bar passage : round Ø 22 [mm] Lsdpfouhap Dox Abkshn - maximum bar passage : hexagonal 19 [mm] - maximum bar passage : square 15 [mm] - max. bar feed length : 60 [mm] - number of spindle speeds : 20 - spindle speed : 620 to 6035 [rpm] - number of camshaft speeds : 24 - max. production : 1-50 [parts/min] - cross slide travel : 30 [mm] - max. independent feed stroke : 50 [mm] - main motor power : 10 [CV] - weight : 4,700 [kg] EQUIPMENT - counter-spindle with brake - counter-operation device - foot + barrel - IEMCA PRA 40/33F bar feeder - chip conveyor

Condition: used, Year of construction: 2019, operating hours: 1,617 h, mast type: telescopic, fuel type: diesel, Weights Empty weight: 21.712 kg Functional Lifting capacity: 454 kg Working height: 4.315 cm Identification Serial number: SX135H-434 Other information Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Outrigger Max. horizontal reach: 2743 m Transport dimensions (LxWxH): 19.76x2.49x3.05 Lhodjw Dmwdspfx Abksn Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2023, Flow Rack for BMW Boxes or Northvolt Bins – used –: Ex-site price: €35,000 (net), plus dismantling, etc. Ledpfxsw Hqmbe Abkohn Manufacturer: Jungheinrich Type: B / Flow Racks Year of Manufacture: End of 2023, system was reportedly never in operation Number of Levels: 4 Maximum Level Height: 1,350 mm Upright Profile: STD’B’18P The system consists of two blocks: Dimensions: Block 1 is approx. 15.50 m x 21 m; Block 2 is approx. 27 m x 29 m Flow levels: 5; return lanes (e.g. for empties) 3 levels Frame height: between 5.75 m and 6.50 m Frame width: 1.30 m Lane width: approx. 2.40 m or 2.10 m (Block 2) Roller conveyor accessories: - Pallet separator device - Lateral centering rollers, per lane 82 pcs. / 41 pcs. per side - Propped up with profile, h = 50 mm below the separator device Configured for BMW / Northvolt bins Pallets run precisely centered. Each rack essentially has a side for full goods and a side for empties, thus in opposite directions. At Northvolt, the empties side is only suitable up to 80 kg per position, full goods nearly 500 kg. For BMW: empties 485 kg and full goods 860 kg, which is not due to load capacity but to the braking force of the brake rollers. Exact bin dimensions will be provided later. Original new price: approx. €600,000 Condition: very good Availability: immediately, must still be dismantled Location: 93055 Regensburg PDF with layouts available on request!

Condition: used, TECHNICAL DETAILS - number of spindles : 8 - number of turning slides : 8 - number of longitudinal stations : 8 - maximum bar passage : round Ø 22 [mm] - maximum bar passage : hexagonal 19 [mm] - maximum bar passage : square 15 [mm] - max. bar feed length : 60 [mm] - number of spindle speeds : 20 - spindle speed : 620 to 6035 [rpm] - number of camshaft speeds : 24 - spindle stop - max. production : 1-50 [parts/min] - cross slide travel : 30 [mm] - max. independent feed stroke : 50 [mm] - main motor power : 10 [CV] - weight : 4,700 [kg] EQUIPMENT - counter-spindle with brake - counter-operation device - foot + barrel Lhedpeuhapdsfx Abksn - IEMCA PRA 40/33F bar feeder - chip conveyor

Condition: used, TECHNICAL DETAILS - Mini/maxi diameter : 5 - 42 [mm] Lhjdpjuhbilefx Abksn - Bar length : 3 200 [mm] - Stroller diameter : 14 [mm] - Channel diameter : 15 [mm] - Supply : 3x400 V, 50 [Hz]

Condition: used, TECHNICAL DETAILS - spindle number : 8 - number of turning slides : 8 - number of longitudinal posts : 8 - max. bar clearance : round Ø 22 [mm] - max. bar clearance : hexagonal 19 [mm] - max. bar clearance : square 15 [mm] - max. feed length : 60 [mm] - number of spindle speeds : 20 - spindle speeds : 620 to 6035 [Rpm] - number of camshaft speeds : 24 - spindle stop - max. production : 1-50 [part/min] - transversal slides strokes : 30 [mm] - independent feeds max. stroke : 50 [mm] - main motor power : 10 [CV] Lsdpfxsuhapks Abkohn - weight : 4 700 [kg] EQUIPMENT - counter-spindle with brake - counter-operation device - foot + barrel - chip conveyor

Condition: used, TECHNICAL DETAILS - number of spindles : 8 - number of turning slides : 8 - number of longitudinal stations : 8 - maximum bar passage : round Ø 22 [mm] - maximum bar passage : hexagonal 19 [mm] - maximum bar passage : square 15 [mm] - max. bar feed length : 60 [mm] - number of spindle speeds : 20 - spindle speed : 620 to 6035 [rpm] - number of camshaft speeds : 24 - max. production : 1-50 [parts/min] Lhodpfx Abjuhap Rokon - cross slide travel : 30 [mm] - max. independent feed stroke : 50 [mm] - main motor power : 10 [CV] - weight : 4,700 [kg] EQUIPMENT - counter-spindle with brake - counter-operation device - foot + barrel - IEMCA PRA 40/33F bar feeder - chip conveyor