Used Atlas Ar50 for sale (434)

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Csdpfxeziizmj Ab Uerf Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: excellent (used), Year of construction: 2012, operating hours: 34,014 h, functionality: fully functional, Screw compressor, Atlas Copco GA30VSDFF 30 kW 12.80 bar 5.58 m3/min Year of manufacture: 2012 Cjdpszkwfvsfx Ab Uerf Operating hours: 34,014

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Used Atlas Copco FD310 refrigerant dryer 6.48 m3/min 14 bar Credozkvbpopfx Ab Uof Year of manufacture: 2021

Condition: used, operating hours: 12,100 h, functionality: fully functional, machine/vehicle number: 010460, We are offering a high-performance industrial compressor from Atlas Copco for sale. The unit is used, has been regularly maintained by qualified personnel, and is immediately ready for operation. Technical specifications: Type: GA37 VSD+ FF (VSD+ technology for maximum energy efficiency) Credpjzdqz Defx Ab Uef Operating hours: 12,100 hours Condition: Used, very well maintained, and immediately ready for operation. The compressor can be inspected and tested on-site in Kiel after prior arrangement.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 292 h, Exhaust emission stage 5, operating pressure 7.0 bar, flow rate 7.0 m3/min; operating pressure 8.6 bar, flow rate 6.0 m3/min; operating pressure 10.3 bar, flow rate 5.0 m3/min. Crsdpfx Abjznww Hj Uof

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO QAS200 generator set, 200 kVA, 2015, serviced Technical specifications: Power: 200 kVA (160 kW); Year of manufacture: 2015; Engine: VOLVO PENTA Operating hours: 3705 hours The generator set is in full working order. Net price: 105,000 PLN Cjdpfx Abszp H T Hj Usrf Gross price: 129,150 PLN Link to video below.

Condition: excellent (used), Year of construction: 2004, operating hours: 59,690 h, functionality: fully functional, Screw compressor Atlas Copco ZR90VSDFF Inverter and dryer integrated. 90 kW 8.75 bar Crodpfx Aboyuvwao Uef 14.70 m³/min

Condition: good (used), Year of construction: 1998, operating hours: 1,329 h, fuel type: diesel, motor manufacturer: Yanmar, Field of application: Construction Drive: Wheel Empty weight: 3.380 kg Number of owners: 1 Crodpfx Aoygwfiob Ujf Technical condition: good Visual appearance: good Drill equipment: Tank, Control Panel, Steel canopy Production country: NL Please contact Michael Overmeer for more information = Additional options and accessories = - Control Panel - Steel canopy - Tank = Remarks = Atlas-Copco with 1.329 operating hours mounted on a trailer year of construction december 1998 with a hydraulically operated light tower (9 meters), hydraulic support legs and a hydraulic nose wheel. Changes and typographical errors reserved.

Condition: excellent (used), I am offering a used Atlas Copco Cobra PRO petrol-powered hammer. The unit is from 2014 and was manufactured in Sweden. The Cobra PRO model is a professional petrol-powered hammer designed for construction, roadwork, and demolition applications – it does not require electrical power or a compressor, making it ideal for outdoor use. The visual condition is as shown in the pictures – with normal signs of use, scratches, and scuffs. It is equipped with a working chisel. Specifications: Manufacturer: Atlas Copco Model: Cobra PRO Year of manufacture: 2014 Country of manufacture: Sweden Engine: 2-stroke petrol engine Application: concrete and asphalt breaking, roadwork, and earthmoving Mobile design – does not require a compressor or mains power. Credpfx Aozkwdlob Uef

Condition: used, 2 oil-free screw compressors for the production of sterile compressed air. Of these: - Compressor 1 (year of manufacture 2006): frequency-controlled with built-in dryer - Compressor 2 (year of manufacture 1992): with downstream adsorption dryer (Atlas Copco, 2003) Additional title: Compressed air generation with screw compressors; manufactured between 1992-2006 Capacity compressor 1: 5.952 m³/min, with a final pressure of 8.4 bar Csdpfx Abezkfw Tj Uorf Capacity compressor 2: 4,982 m³/min, with a final pressure of 8.0 bar Features: 2 screw compressor (one of which has a built-in dryer and variable-speed drive, and one with a separate dryer)

Condition: excellent (used), Year of construction: 2014, ATLAS COPCO XAS186 portable compressor, machine with aftercooler after full service. Technical specifications: capacity: 11.10 m3/min; working pressure: 7 bar; year of manufacture: 2014 DEUTZ engine mileage Crjdpsyfnwgefx Ab Ujf the compressor is fully operational, ready for work, with warranty net price: 79,500 PLN gross price: 97,785 PLN machine imported in excellent condition Video links below.

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P3500i power generator The Atlas Copco P3500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 3500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood, CE compliant noise level, quiet Power sockets Electric key start (12V) Inverter technology, stable voltage and frequency Instrumentation, voltmeter, hour meter Circuit breaker Wheels Engine alarm: low oil level, overload Intelligent speed control for fuel efficiency Connections for parallel operation (parallel operation kit with cables optionally available) Codpfxol R Hz Ss Ab Ujrf Voltage 230V / 50Hz Peak power 3.3 Rated power 3.0 Tank capacity (l) 10.0 Starter type electric / cable Weight 45.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 240/120V Twist Lock

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P2500i power generator The Atlas Copco P2500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Cjdpfel R Hy Asx Ab Uorf Key product features: Atlas Copco P 2500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood CE compliant noise level, quiet Power sockets Inverter technology, stable voltage and frequency Engine alarm: low oil level, overload Speed control for fuel efficiency Connections and cables for parallel operation Voltage 230V / 50Hz Peak power 2.5 Rated power 2.3 Tank capacity (l) 4.0 Starter type pull starter Weight 27.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 120V 20A | 1x Nema 120V Twist Lock

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (at tel. number, he will be happy to assist you. JAB Hydraulic Hammer / Hammer / MS03 / in stock & immediately available Price: €3,490.00 net / €4,153.10 gross - Weight (kg): 336 - Length with chisel (mm): 1,500 - Chisel diameter (mm): 70 Equipment: - incl. MS03 adapter plate Crodpfx Ajznrr Esb Usf Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. In our warehouse, we have a very large selection of various attachments that are immediately available! Mr. Herden (tel. number) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telescopic loader sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: JW10GC = Further Information = Intended use: Construction Unladen weight: 336 kg Please contact Marius Herden for further information.

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar Credpfxjhabk De Ab Ujf -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Condition: good (used), Pneumatic double diaphragm pump -Fast venting and immediate suction of the medium -Dry running without: damage -Hermetically sealed for: moisture-sensitive liquids Codpodwf S Uefx Ab Uorf -Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces: -Air max. Pressure: bar -Air connection: 1 "inch -Water output: l/min -Water max. Pressure: bar -Connection: B coupling -Dimensions: 480/400/H530 mm -Weight: 32 kg

Condition: used, Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab Crsdpfx Absx R Sv Ej Uof -Bucket width: 600 mm -Contents: 400 l -Opening width: 1400 mm -complete: with rotary servo -Mounting bolt: Ø 80 mm -Intermediate mounting dimension: 340 mm -Weight: 700 kg

Year of construction: 2010, condition: good (used), Oil/water separator, oil-water separation system -Dimensions: 660/260/H700 mm Credpfx Abeb A Sgke Ujf -Weight: 18 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Atlas Copco, Standard cylinder type C4-200-40 Cedpogr E R Ajfx Ab Ujrf -Stroke travel: 200 mm -Piston rod: Ø 40 mm -Dimensions: 330/280/H510 mm Total weight: 33 kg

Condition: good (used), Digging bucket, excavator bucket, demolition bucket -Design: stable -Width: 570 mm -Height: 450 mm -Depth: 600 mm -Intermediate mounting dimension: 160 mm -Hole spacing: 220 mm -Bore: Ø 45 mm -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 130 kg Cedob A I Injpfx Ab Ujrf

Condition: good (used), Digging bucket, excavator bucket, demolition bucket -Width: 600 mm -Height: 600 mm -Depth: 800 mm -Intermediate mounting dimension: 255/200 mm -Bore: Ø 45/50 mm -Laceration teeth Crjdpfxob A I Rce Ab Ujf -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 160 kg

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 -Stroke: 240 mm Cedpfjgrzvkex Ab Ujrf -Piston rod: Ø 40 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 320/280/H470 mm -Weight: 34 kg/piece

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 250 mm -Piston diameter: 40 mm Crsdpjfbnkaofx Ab Usf -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 410/55/H55 mm -Weight: 1.5 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces Codpsfbmu Sofx Ab Uorf -Dimensions: 100/65/H65 mm -Weight: 0.75 kg/piece

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200 -Stroke: 194 mm -Piston rod: Ø 40 mm -Total dimensions: 220/265/H645 mm Cedpfegr E R Usx Ab Uerf -Total weight: 24 kg