Used Atlas Ar65 Super for sale (442)

Condition: good (used), functionality: fully functional, fuel type: diesel, overall weight: 5,300 kg, Year of construction: 2014, operating hours: 7,440 h, Equipment: additional headlights, all wheel drive, cabin, standard shovel, Atlas 65 wheel loader, year 2014 with 7,440 operating hours, quick coupler and bucket, in clean condition and immediately ready for use. Transport and delivery possible. Inspection by appointment, including on weekends. Lodpfx Aey N Ei Njk Ajad

Condition: used, Year of construction: 2018, Manufacturer: ATLAS COPCO, Type: GA55VSD+ FF, Year of manufacture: 2018, Serial no. API863701, Motor power 55 kW, Maximum pressure 12.75 bar, Compressed air tank, Manufacturer: Lohenner, Year of manufacture: 2018, Serial no. 222546, Capacity 2,000 l, Oil/water separator Ljdjzn Aq Espfx Ak Aead Operating hours: 3,997; Real-time hours: 8,740 - later release date: 10/31/2026 +++ Attention: This machine is part of an online auction! +++

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Atlas Copco ZA5 VSD industrial air compressor, featuring variable speed drive (VSD) technology and producing completely oil-free compressed air, certified to ISO 8573-1 Class 0. Technical data: • Manufacturer: Atlas Copco • Model: ZA5 VSD • Year of manufacture: 2019 • Total rated power: 250 kW • Maximum working pressure: 4 bar(e) • Rotation speed: 1,879 rpm • Gross weight: 5,662 kg • Technology: variable speed drive (VSD) • Air quality: oil-free, ISO 8573-1 Class 0 • Made in Belgium • WEG frequency inverter Lasdpfx Akoznaxas Ajd • Serial number: APF239403

Condition: excellent (used), Year of construction: 2013, operating hours: 72,688 h, functionality: fully functional, Atlas Copco GA45VSDFF screw compressor Inverter and dryer integrated. 45 kW 12.75 bar 8.67 m3/min Year of manufacture: 2013 Lasdpfx Aksznlx Se Ajd Operating hours: 72,688 h

Condition: used, Atlas Copco Skid-mounted lubrication/seal oil system for compressor train including base reservoir/tank with pumps, filters, coolers, and valve manifold Including run down tank and assorted spares & gaskets as shown on the downloadable list below Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement form (EUS) by the buyer, and, if the buyer is not the end user, for each end user. Lajdpezmadmofx Ak Asd BPDD and EUS forms can be downloaded from the website.

Condition: excellent (used), Year of construction: 2013, operating hours: 58,270 h, functionality: fully functional, Oil-free screw compressor, Atlas Copco ZR90VSD Inverter integrated Laedjzmwc Hopfx Ak Ajd 90 kW 9 bar 15.50 m3/min Year of manufacture: 2013 Operating hours: 58,270

Condition: excellent (used), Year of construction: 2012, operating hours: 19,221 h, functionality: fully functional, Oil-free screw compressor ZT250FF Dryer integrated. 250 kW 10 bar 42.31 m3/min Year of manufacture: 2012 Operating hours: 19,221 Lsdpfxezmdrbe Ak Asad

Condition: used, Year of construction: 2011, operating hours: 7,017 h, Equipment: all wheel drive, Stock no. 5795 Atlas 160 W mobile excavator with additional hydraulics ----* Manufacturer: Atlas * Type: 160W - Mobile excavator Lodpfjzntg Dsx Ak Ajad * Year of manufacture: 2011 * Power-shift transmission * Color: Orange * Tires: 10.00 - / Twin tires * kW/HP: 114 kW / 153 HP * Deutz engine with 153 HP, water-cooled * 2-shell grab * Total operating hours recorded: approx. 7,017 hours * Hydraulic operating hours recorded: approx. 2,855 hours * Hydraulic connections for hammer and shears * 301 liter diesel tank * 180 liter hydraulic tank * 32 liter AdBlue tank * Air conditioning * Adjustable boom * 270-degree camera system * Rotating beacon * Max. km/h * Work lights * Transport dimensions: 7.60m long x 3.15m high x 2.54m wide Note regarding potential errors in the advertisement: Despite careful preparation of the advertisement, isolated errors may have occurred in the text or the information provided. We assume no liability for errors, changes, or interim sales. All information is provided without warranty. Please contact us to verify details or clarify any further questions.

Condition: used, operating hours: 12,100 h, functionality: fully functional, machine/vehicle number: 010460, We are offering a high-performance industrial compressor from Atlas Copco for sale. The unit is used, has been regularly maintained by qualified personnel, and is immediately ready for operation. Technical specifications: Type: GA37 VSD+ FF (VSD+ technology for maximum energy efficiency) Operating hours: 12,100 hours Condition: Used, very well maintained, and immediately ready for operation. The compressor can be inspected and tested on-site in Kiel after prior arrangement. Laedpfx Aezdqz Dok Aed

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 292 h, Exhaust emission stage 5, operating pressure 7.0 bar, flow rate 7.0 m3/min; operating pressure 8.6 bar, flow rate 6.0 m3/min; operating pressure 10.3 bar, flow rate 5.0 m3/min. Ljdpfoznww Hsx Ak Ajad

Condition: like new (used), Atlas Copco / Scheugenpflug The entire system is unused and in new condition. Type: VDS P6030 Automatic processing of a complete process from loading to unloading. Mixing of two components (e.g., resin and hardener) directly in the process. Precise application of the material at defined positions on the workpiece. Movement of parts via a 3-axis system (X, Y, Z). Operation in automatic, semi-automatic, and manual mode. Technical data: Power connection: 400 V AC, 50/60 Hz Rated current: 13.6 A Power consumption: 8.5 kVA Fuse rating: 3 × 32 A Control voltage: 24 V DC Operating pressure: 6 bar Pressure monitoring: 4 bar Compressed air connection: 6 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10 % to 85 % (without condensation) Enclosure protection class: IP21 Foundation inclination: max. 0.05 % Clearance around the machine: 0.8 m Clearance in front of the control cabinet: 1.2 m Width: 1660 mm x Height: 2305 mm x Depth: 1315 mm Weight: 600 kg Sound pressure level: ≤ 70 dB(A) Type: A310 Technical data: Tank volume: 60 l resin and 20 l hardener Stirrer in each tank Vacuum sensor per tank Level sensors including overfill protection Intake valve per tank Laedpfx Ajy Naf Eek Ajd Sight glass with lighting Vacuum degassing directly in the tank Material circulation to prevent sedimentation Optional tank heating Pneumatically driven piston pumps Delivery volume approx. 294 cm³ per stroke 1 or 2 pumps per tank possible Continuous delivery in a dual pump system Pump variants horizontal and vertical for highly viscous materials Vacuum generation via vacuum pump or ejector Oil separator to protect the vacuum pump Control via SCP touch panel Operating modes: automatic, pause, external control Material circulation in pause mode Connection to external control via interface possible Monitoring of production time, system availability, and material consumption Calculation of the remaining material availability Supply: 230 V or 400 V AC Operation outside the EU with a transformer possible Operating temperature: +5 °C to +40 °C With vacuum pump: +10 °C to +40 °C Humidity: 10 to 80 percent Protection class: IP20 Dimensions: Width 700 mm x Height 1950 mm x Depth approx. 1165 mm Weight: approx. 400 kg Type: LP804 Technical data: Application: Conveying and processing of 1-component and 2-component dispensing materials (low to medium viscosity, also abrasive) Tanks have 50 and 20 liters Control voltage: 24 V DC Power connection: according to wiring diagram Rated current: according to wiring diagram Power consumption: according to wiring diagram Fuse rating: according to wiring diagram Operating pressure: 6 bar Pressure monitoring: 4 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10 % to 85 % (non-condensing) Enclosure protection class: IP54 Protection class entire system: IP20 Installation surface: max. 0.5 % inclination Clearance around the system: 0.8 m Clearance in front of the control cabinet: 1.2 m Width: 1500 mm x Height: 2050 mm x Depth: 770 mm Weight: 430 kg Scheugenpflug SNDE121196 ZES 217955 Dimensions: L 212 cm / W 209 cm / H 215 cm / Scheugenpflug SNDE121197 ZES 217958 Dimensions: L 190 cm / W 190 cm / H 220 cm / 430 kg (machine) + 100 kg Scheugenpflug SNDE118236 ZES 216335 Dimensions: L 200 cm / W 100 cm / H 220 cm / Noise level: ≤ 70 dB(A) Condition: unused Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Further questions can be clarif

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (at tel. number, he will be happy to assist you. JAB Hydraulic Hammer / Hammer / MS03 / in stock & immediately available Price: €3,490.00 net / €4,153.10 gross - Weight (kg): 336 - Length with chisel (mm): 1,500 - Chisel diameter (mm): 70 Equipment: - incl. MS03 adapter plate Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. In our warehouse, we have a very large selection of various attachments that are immediately available! Mr. Herden (tel. number) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. Lajdpfjznrr Eox Ak Asd We are an official Magni telescopic loader sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: JW10GC = Further Information = Intended use: Construction Unladen weight: 336 kg Please contact Marius Herden for further information.

Condition: excellent (used), Year of construction: 2012, operating hours: 34,014 h, functionality: fully functional, Screw compressor, Atlas Copco GA30VSDFF 30 kW 12.80 bar Lasdozkwfvjpfx Ak Ajd 5.58 m3/min Year of manufacture: 2012 Operating hours: 34,014

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Used Atlas Copco FD310 refrigerant dryer 6.48 m3/min 14 bar Year of manufacture: 2021 Ljdpfxjzkvbps Ak Ajad

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Ljdpjziizmjfx Ak Ajad Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: excellent (used), Year of construction: 2004, operating hours: 59,690 h, functionality: fully functional, Screw compressor Atlas Copco ZR90VSDFF Lsdpfsyuvwaex Ak Ajad Inverter and dryer integrated. 90 kW 8.75 bar 14.70 m³/min

Condition: used, Year of construction: 2013, Overview  This low-pressure air compressor was manufactured in 2013 by the Swedish company Atlas Copco, a global leader in industrial compressed air systems. The GA132 VSD model delivers up to 24.1 m³/min of air at a maximum pressure of 8.5 bar. The unit remains installed and connected, is in excellent operating condition, and is immediately available. The annual maintenance was completed in August 2025, and spare parts are included. An Atlas Copco air dryer can also be provided upon request. Technical data  - Operating Pressure: 7–8.5 bar - Air Capacity: 24.1 m³/min - Power Supply: 132 kW Lasdpfx Akoyb Thve Aed - Weight: 4,075 kg - Condition: Excellent, annual maintenance completed August 2025 - Optional equipment: Atlas Copco air dryer available - Status: Installed and connected, fully functional

Condition: used, Year of construction: 2012, Overview  This low-pressure air compressor was manufactured in 2012 by the Swedish company Atlas Copco. The GA132 VSD model delivers up to 24.1 m³/min at a maximum pressure of 8.5 bar. Laodpfx Ajyb Thiok Ajd The unit was fully reconditioned in 2025, including the installation of a new HMI, and is in excellent working condition. It remains installed and connected, can be inspected on-site, and is immediately available. Spare parts are included, and an Atlas Copco air dryer can be supplied optionally. Technical data  - Operating Pressure: 7–8.5 bar - Air Capacity: 24.1 m³/min - Power Supply: 132 kW - Weight: 4,075 kg - Condition: Fully reconditioned in 2025 (new HMI) - Additional equipment: Optional Atlas Copco air dryer - Status: Installed and connected, fully functional - Availability: Immediate

Condition: used, Year of construction: 2012, Overview This industrial air dryer was manufactured in 2012 by the Swedish company Atlas Copco. The FD760 VSD model is a refrigeration-type dryer designed for continuous operation in compressed air systems up to 14 bar, with a maximum flow capacity of 760 L/s. The unit is still installed and connected, has been regularly maintained, with the latest maintenance completed in August 2025, and is in excellent operating condition. It is immediately available and can be inspected on site. Technical data  Lajdpfjxrnn Djx Ak Asd - Application: Air dryer for 7 7-bar low-pressure compressor - Flow Capacity: 760 L/s - Operating Pressure: Up to 14 bar - Power Supply: 5.6 kW - Refrigerant: R410A - Weight: 380 kg

Condition: used, Year of construction: 2009, Overview  This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data  - Years of Manufacture: 2009 – 2013 Lajdpfjxrc Acex Ak Ajd - Application: Industrial compressed air system - Total Capacity: 2 × 24.1 m³/min - Maximum Pressure: 8.5 bar - Power Supply: 274.8 kW Scope of Delivery  - Compressor | Atlas Copco | GA132 VSD | 2013 - Compressor | Atlas Copco | GA132 VSD | 2012 - Air dryer | Atlas Copco | FD160 VSD | 2012 - Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009

Condition: excellent (used), I am offering a used Atlas Copco Cobra PRO petrol-powered hammer. The unit is from 2014 and was manufactured in Sweden. The Cobra PRO model is a professional petrol-powered hammer designed for construction, roadwork, and demolition applications – it does not require electrical power or a compressor, making it ideal for outdoor use. The visual condition is as shown in the pictures – with normal signs of use, scratches, and scuffs. It is equipped with a working chisel. Specifications: Manufacturer: Atlas Copco Model: Cobra PRO Year of manufacture: 2014 Country of manufacture: Sweden Engine: 2-stroke petrol engine Application: concrete and asphalt breaking, roadwork, and earthmoving Mobile design – does not require a compressor or mains power. Lsdpfxozkwdls Ak Aoad

Condition: used, mileage: 1,001 km, first registration: 01/1994, color: orange, driver cabin: other, gearing type: other, Year of construction: 1994, Vehicle location: Bovenden. Superstructure: Grabber with a capacity of approximately 250 liters. Width 500mm, depth 450mm, with rotary servo and teeth. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Laedji Rqmvspfx Ak Asd

Condition: used, 2 oil-free screw compressors for the production of sterile compressed air. Of these: - Compressor 1 (year of manufacture 2006): frequency-controlled with built-in dryer - Compressor 2 (year of manufacture 1992): with downstream adsorption dryer (Atlas Copco, 2003) Additional title: Compressed air generation with screw compressors; manufactured between 1992-2006 Ljdpozkfw Tefx Ak Ajad Capacity compressor 1: 5.952 m³/min, with a final pressure of 8.4 bar Capacity compressor 2: 4,982 m³/min, with a final pressure of 8.0 bar Features: 2 screw compressor (one of which has a built-in dryer and variable-speed drive, and one with a separate dryer)

Condition: excellent (used), Year of construction: 2016, General information Field of application: Construction Reference number: 4 Weights Empty weight: 1.300 kg Functional Dimensions of cargo space: 200 x 70 x 60 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Lodpfx Akjvpq Tbe Aoad Visual appearance: very good Other information Fits to following machines: 17-29ton Reconditioned: Yes Delivery terms: EXW Working pressure: 160-180 bar Required hydraulic flow: 155 l/min Strike count: 330-680 Latest inspection: 2025-01-02 Production country: DE Additional information Please contact Ö. Inalkac for more information We offer you Rebuild/overhauled/ überholt Atlas Copco/ Epiroc MB1500 from 2016. This model has New seal kit, retainer pins, bushes, stop pin, chisel/tool, shock absorber, hoses, decals and new painted. More units available. We can ship worldwide. MB1200 HB2000 MB1650 MB1700

Condition: excellent (used), Year of construction: 2016, General information Field of application: Construction Reference number: 4 Weights Empty weight: 1.300 kg Functional Dimensions of cargo space: 200 x 70 x 60 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 17-29ton Reconditioned: Yes Delivery terms: EXW Working pressure: 160-180 bar Required hydraulic flow: 155 l/min Lajdovpq Thepfx Ak Aod Strike count: 330-680 Latest inspection: 2025-01-02 Production country: DE Additional information Please contact Ö. Inalkac for more information We offer Atlas Copco/ Epiroc MB1500 from 2016 with Conti Lube, all bushes, seal kit, 2 guide plate small, 2 guide plate, 2 shock absorber, guide, 2 tool pin, 2 stop pin, chisel, decals, hoses and new painted. MB1600 MB1650 MB1700 MB1200