Used Atlas Aw1140 for sale (432)

Condition: ready for operation (used), functionality: fully functional, power: 37 kW (50.31 HP), Year of construction: 2019, pressure (max.): 13 bar, usable tank capacity: 1,500 l, rotational speed (max.): 3,800 rpm, volume flow: 475.2 m³/h, machine/vehicle number: API866497, The compressor received a comprehensive service in December 2025, including an oil and filter change! TECHNICAL DETAILS Cut-in pressure: 8.5 bar Cut-out pressure: 10.0 bar Operating temperature: 76 °C Volume flow: 131.9 l/s Volume of pressure vessel: 1,500 l Manufacturer of pressure vessel: OKS Otto Klein GmbH MACHINE DETAILS Engine power: 37 kW Engine speed: 3,800 rpm Bedpfxjzf Afqo Ad Soli Operating hours (as of 12/2025): 31,006 h Machine weight: 860 kg The following work was carried out during the service in December 2025: Oil change Air filter cartridge replaced Oil filter replaced Oil separator cartridge replaced Emergency stop switch checked Safety valve checked Test run performed Oil level checked Oil leaks checked Air leaks checked Belt tension checked Drive coupling checked

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Blodpfoziizmox Ad Sei Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: used, Year of construction: 2013, Overview  This low-pressure air compressor was manufactured in 2013 by the Swedish company Atlas Copco, a global leader in industrial compressed air systems. The GA132 VSD model delivers up to 24.1 m³/min of air at a maximum pressure of 8.5 bar. The unit remains installed and connected, is in excellent operating condition, and is immediately available. The annual maintenance was completed in August 2025, and spare parts are included. An Atlas Copco air dryer can also be provided upon request. Technical data  - Operating Pressure: 7–8.5 bar - Air Capacity: 24.1 m³/min - Power Supply: 132 kW - Weight: 4,075 kg - Condition: Excellent, annual maintenance completed August 2025 - Optional equipment: Atlas Copco air dryer available Bedpfxeyb Thvj Ad Ssli - Status: Installed and connected, fully functional

Condition: used, Year of construction: 2012, Overview  Bljdsyb Thijpfx Ad Sei This low-pressure air compressor was manufactured in 2012 by the Swedish company Atlas Copco. The GA132 VSD model delivers up to 24.1 m³/min at a maximum pressure of 8.5 bar. The unit was fully reconditioned in 2025, including the installation of a new HMI, and is in excellent working condition. It remains installed and connected, can be inspected on-site, and is immediately available. Spare parts are included, and an Atlas Copco air dryer can be supplied optionally. Technical data  - Operating Pressure: 7–8.5 bar - Air Capacity: 24.1 m³/min - Power Supply: 132 kW - Weight: 4,075 kg - Condition: Fully reconditioned in 2025 (new HMI) - Additional equipment: Optional Atlas Copco air dryer - Status: Installed and connected, fully functional - Availability: Immediate

Condition: used, Year of construction: 2012, Overview This industrial air dryer was manufactured in 2012 by the Swedish company Atlas Copco. The FD760 VSD model is a refrigeration-type dryer designed for continuous operation in compressed air systems up to 14 bar, with a maximum flow capacity of 760 L/s. The unit is still installed and connected, has been regularly maintained, with the latest maintenance completed in August 2025, and is in excellent operating condition. It is immediately available and can be inspected on site. Technical data  - Application: Air dryer for 7 7-bar low-pressure compressor Bedpexrnn Dsfx Ad Sjli - Flow Capacity: 760 L/s - Operating Pressure: Up to 14 bar - Power Supply: 5.6 kW - Refrigerant: R410A - Weight: 380 kg

Condition: used, Year of construction: 2009, Overview  Bsdpfxsxrc Acj Ad Seli This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data  - Years of Manufacture: 2009 – 2013 - Application: Industrial compressed air system - Total Capacity: 2 × 24.1 m³/min - Maximum Pressure: 8.5 bar - Power Supply: 274.8 kW Scope of Delivery  - Compressor | Atlas Copco | GA132 VSD | 2013 - Compressor | Atlas Copco | GA132 VSD | 2012 - Air dryer | Atlas Copco | FD160 VSD | 2012 - Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P3500i power generator The Atlas Copco P3500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. Bsdpfx Ael R Hz Ssd Ssli With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 3500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood, CE compliant noise level, quiet Power sockets Electric key start (12V) Inverter technology, stable voltage and frequency Instrumentation, voltmeter, hour meter Circuit breaker Wheels Engine alarm: low oil level, overload Intelligent speed control for fuel efficiency Connections for parallel operation (parallel operation kit with cables optionally available) Voltage 230V / 50Hz Peak power 3.3 Rated power 3.0 Tank capacity (l) 10.0 Starter type electric / cable Weight 45.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 240/120V Twist Lock

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P2500i power generator The Atlas Copco P2500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 2500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood CE compliant noise level, quiet Bljdsl R Hy Aepfx Ad Ssi Power sockets Inverter technology, stable voltage and frequency Engine alarm: low oil level, overload Speed control for fuel efficiency Connections and cables for parallel operation Voltage 230V / 50Hz Peak power 2.5 Rated power 2.3 Tank capacity (l) 4.0 Starter type pull starter Weight 27.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 120V 20A | 1x Nema 120V Twist Lock

Condition: good (used), Year of construction: 1998, operating hours: 1,329 h, fuel type: diesel, motor manufacturer: Yanmar, Field of application: Construction Drive: Wheel Empty weight: 3.380 kg Number of owners: 1 Technical condition: good Visual appearance: good Drill equipment: Tank, Control Panel, Steel canopy Blsdpsygwfijfx Ad Sei Production country: NL Please contact Michael Overmeer for more information = Additional options and accessories = - Control Panel - Steel canopy - Tank = Remarks = Atlas-Copco with 1.329 operating hours mounted on a trailer year of construction december 1998 with a hydraulically operated light tower (9 meters), hydraulic support legs and a hydraulic nose wheel. Changes and typographical errors reserved.

Condition: excellent (used), Year of construction: 2013, operating hours: 29,558 h, functionality: fully functional, Screw compressor, Atlas Copco GA55FF Dryer integrated 55 kW 9.75 bar Blsdpfx Aezil Iiod Soi 8.94 m3/min Year of manufacture: 2013 Operating hours: 29,558

Condition: excellent (used), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer, with their advanced digital control systems, represent significant advancements in the application of digital and optical technologies in user-friendly laboratory weathering devices. The 3000 series has been approved by many OEMs in the textile, paint, and coatings industries, as well as in the plastics industry, as an exclusive platform for precise, reproducible, and repeatable results for predicting service life. Features: Climate type Test type: Sunlight simulation Light source: Xenon arc lamp Applications: Additives and dyes Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000’s humidification system uses a compressed air ultrasonic spray nozzle. Before entering the unit, the compressed air must pass through a water/oil separator. The small air regulator in the CI3000 contains a second water-oil filter and a 5-micron particulate filter. Ensure that a separate oil-water separator is installed and do not rely on the filter in the air regulator, as it is only designed as an additional device. Compressed air specifications Pressure: 80-100 PSI (552-689 kPa) Flow rate: 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the CI3000 37.5” Width x 29” Depth x 72” Height (95 cm Width x 73 cm Depth x 183 cm Height) Required footprint: 41.5” Width x 80” Depth (105 cm Width x 203 cm Depth) Total weight: 404 kg Bedpfx Adozg Tmhe Ssli Voltage: 380-220 V 38 A 50 Hz ~3/N/PE 8 kW 404 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 1988, operating hours: 17,000 h, 1988 | Atlas Copco QAS125KD | Used Generator Set | 17000 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 4000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 20 inspection points 16 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 17000 hours noting that the meter may not be working since it's illegible; engine that runs impeccably; generator set fixed on the trailer. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40886 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Bljdpszg Nr Hefx Ad Sji ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: repair required (used), Year of construction: 2007, functionality: not functional, Screw compressor Atlas Copco GA250FF Bjdjzhu Naepfx Ad Ssli Dryer integrated 250 kW 9.75 bar 37.80 m3/min Year of manufacture: 2007 Main motor defective Price: 9,000 EUR

Condition: excellent (used), Atlas Type: CI3000+ Ci3000+ Weather-Ometer/Fade-Ometer Model: CI3000W Year of manufacture: 06/2022 Operating time: Device 816.5 hours Lamp operating time: Device 647.4 hours Total lamp operating time: 88.9 hours Atlas CI3000+ Xenon Weather-Ometer with calibration case The Ci3000+ Weather-Ometer and Fade-Ometer, with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering devices. The 3000 series has been approved by many OEMs in the textile, paint, and coating industries, as well as the plastics industry, as an exclusive platform for precise, reproducible, and repeatable results for predicting service life. The 3000 series has been certified according to CE, UL, CSA, ISO, and EN standards. The main features of this device are: a rotating sample rack to maximize the homogeneity of all samples; customizable nozzles for uniform front and back spraying of samples; ASTM black panel thermometer or ISO/DIN black standard thermometer for regulating and monitoring the temperature at the sample level to ensure the repeatability of the tests. 4500 W water-cooled xenon lamp Total exposure area 2188 cm2 (339 in2) 12-inch TFT full-color touchscreen control panel - displays all test parameters Direct setting and control of black panel (BPT, non-insulated) or black standard (BST, insulated) temperature Blodpfozgr Nhox Ad Ssi Direct setting and control of relative humidity Direct setting and control of the air temperature of the sample chamber Display of diagnostic messages 14 factory-preprogrammed test methods (Weather-Ometer); 6 factory-preprogrammed test methods (Fade-Ometer) Properties: Type: Climate Test type: Sunlight simulation Light source: Xenon arc lamp Applications: Additives and dyes Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Voltage: 340-415V 43A 50/60Hz 〜3/N/PE 8kW 410 kg Condition: used Scope of supply: (See image) (Subject to change and errors in the technical data, information provided!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Atlas Ci3000+ Xenon Weather-Ometer Manufacturer: Atlas Material Testing Technology LLC Type: Ci3000+ Model: Ci3000+ Weather-Ometer Machine Type: Xenon Weather-Ometer / Weathering Test Device For sale is a used Atlas Ci3000+ Xenon Weather-Ometer. The device is suitable for artificial weathering, light aging, material testing, quality control, as well as aging tests of plastics, paints, coatings, textiles, and materials. Technical Data Light Source: Xenon Arc Lamp Lamp Rated Power: 4,500 W Xenon Lamp Operating Range: 1,700 - 4,500 W Device Model as Displayed: Ci3000+ W Sample Sensor 1: Black Standard Sample Sensor 2: Black Panel Light Sensor 1: CI 300 - 400 nm Light Sensor 2: CI 420 nm Power Connection: 220 / 380 V Frequency: 50 Hz Connection Type: 3/N/PE Rated Current: 50 A Power Consumption: 9.5 kW Control Voltage: 24 VDC Compressed Air Supply Required Operating Pressure: 80 - 100 PSI / 552 - 689 kPa Compressed Air Consumption: approx. 4 CFM / 0.11 m³/min Dimensions approx.: 950 x 730 x 1,830 mm (W x D x H) Required Footprint approx.: 1,050 x 2,030 mm (W x D) Weight approx.: 404 kg Minimum Distance Exhaust Hood: approx. 102 - 152 mm Operating Data Equipment Touchscreen Control Panel Xenon Burner Test Chamber with Sample Basket Black Standard Sensor Black Panel Sensor CI 300 - 400 nm Light Sensor CI 420 nm Light Sensor Water-Cooled Lamp System Exhaust Connection Interface Connections Integrated Humidification System Accessories / Documents Blodpfx Aezf D Rnsd Soi Atlas Weathering Testing Guidebook Atlas Weather-Ometer Auxiliary Filter Lantern Kit Instructions Existing Documentation as Shown in Pictures Existing Accessories as Shown in Pictures Areas of Application Artificial Weathering Light Aging Test UV and Xenon Testing Material Testing Plastic Testing Paint and Coating Testing Textile Testing Automotive Industry Quality Assurance Research and Development Scope of Supply Atlas Ci3000+ Xenon Weather-Ometer Existing Accessories as Shown in Pictures Existing Documentation as Shown in Pictures Condition Used Good Optical Condition Optical Condition as Shown in Pictures Inspection possible by appointment. Scope of supply as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: good (used), gearing type: automatic, fuel type: diesel, first registration: 07/1994, Year of construction: 1994, operating hours: 12,130 h, Drive: Wheel drive Number of cylinders: 4 Blsdpfx Aezivd Ied Ssi Gross vehicle weight rating (GVWR): 18,000 kg Dimensions (L x W x H): 850 x 255 x 325 cm Please contact Vitali Lenda for further information.

Condition: used, Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab -Bucket width: 600 mm -Shovel length closed: 1400 mm Bsdpjb A Huisfx Ad Sjli -Total height: 2,200 mm

Condition: excellent (used), Year of construction: 2014, operating hours: 594 h, Field of application: Construction Empty weight: 750 kg Bledezd Af Ijpfx Ad Sji Capacity: 5 m³/m Technical condition: very good Visual appearance: very good Drill equipment: Plastic canopy Delivery terms: EXW Working pressure: 7 bar Please contact Vink Machinery for more information = Additional options and accessories = - Plastic canopy

Condition: used, Quantity: 4 units Functionally tested; item originates from the dismantling of equipment from an automotive supplier. 3001 4294-2304 Atlas Copco Manufacturer: Atlas Copco Model: 3001 4294-2304 Component from Atlas Copco, part of an SCA control or connection unit for industrial applications. Used in automated production environments, particularly in adhesive and dispensing technology. Blodpfx Ajzfi Tujd Ssi Ideal for replacement, maintenance, or system expansion in existing Atlas Copco systems.

Condition: excellent (used), Here we offer you a weathering test device. Heraeus Atlas Xenotest BETA – a universal weathering instrument for testing the lightfastness and weather resistance of materials under normal, high-temperature, and high-performance conditions. XENOSENSIV drive Control of lamp power in W/m² XENOCHROME 320 35-100 W/m² Sample chamber temperature up to 80°C, regulated Measurement sensor on sample level XENOSENSIV E(300-400 nm) Humidification / irrigation Water supply with integrated water tank Sample chamber temperature: Ambient - 80 °C Black standard temperature: Surface - 130 °C Relative humidity: 10 % - 95 % Electronic version: 3/N/PE AC 400V ± 10 % 50-60 Hz Power connection: 32A Power consumption: approx. 12 kVA Rated power of the xenon lamp: 2200 VA Power of the xenon lamp: 2800 VA Rated current: 16A Lamp current max.: 20A Dimensions: Width 900 mm x Depth 1200 mm x Height 1800 mm Maximum sample area: 4000 cm² Weight: approx. 400 kg Type: Heraeus Atlas Xenotest BETA LM Condition: used Scope of delivery: (See picture) Bjdozdtkuopfx Ad Ssli (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2004, Compressor type: Oil-injected rotary screw compressor with integrated refrigerant dryer Motor power: 15 kW (20 HP) Power supply: 380 V / 50 Hz Operating pressure: 7.5 bar Free Air Delivery (FAD): 798 m³/h (approximately 13.3 m³/min) Noise level: 68 dB(A) Tank capacity: 400 liters Dimensions (L × W × H): 1,000 × 660 × 1,400 mm Weight: 450 kg Blsdpswgca Tofx Ad Soi Cooling: Air-cooled Integrated dryer: Yes Control system: Elektronikon®

Condition: used, functionality: fully functional, power: 7 kW (9.52 HP), fuel type: diesel, empty load weight: 1,010 kg, Year of construction: 2024, operating hours: 4 h, drive type: Diesel, Mini excavator Condition: Ready for use and fully functional Technical condition: New Description: Micro excavator ATLAS AC08B - - NEW - - Year of manufacture 2024 - - 4 operating hours - - 1010 kg dead weight - - mechanical quick coupler LEHNHOF MS 01 - - hydraulic adjustable drive 75 - 100 cm - - - headlights at the front - - 2 new trench buckets 25 + 50 cm - - 1 new hydraulic slope bucket 85 cm (strong buckets) - - 2-cylinder YANMAR diesel engine 7.5 kW/10 HP - - roll bar for folding - - fully fueled - - mini excavator in SUPER CONDITION!! Bodpfxozhdl Ds Ad Seli Quick coupler, bucket, work lights at the front, CE certificate,

Condition: excellent (used), Technical condition: very good Visual appearance: very good Please contact Ferdinand Pater for more information Bodpfx Ajt Dltbsd Ssli

Condition: used, Year of construction: 2023, Atlas Copco ZE6D275-5VSD Centrifugal Air Compressor, 315kW, 690V, 1763rpm (Unused) Blsdpjzc Rgljfx Ad Sei Tag K1501S See Lot Details pdf file attachments section below for further information. Photos may feature items not included and should not be relied on. The description table/text describe the item(s) for sale in this lot.

Year of construction: 2014, condition: ready for operation (used), Three Atlas Copco compressed air compressors are available. 1) Oil lubricated screw compressor Atlas Copco GA18 VSD, year of manufacture: 2014, max. operating pressure: 13bar, power: 18kW, max. air flow: 216m³/h, machine dimensions X/Y/Z: approx. 1300mm/900mm/1500mm, weight: approx. 550kg, operating hours: approx. 69000h. 2) Oil lubricated screw compressor Atlas Copco GA15, year of manufacture: 1998, max. operating pressure: 13bar, power: 15kW, max. air flow: 155m³/h, machine dimensions X/Y/Z: approx. 1900mm/700mm/1600mm, weight: approx. 400kg, operating hours: approx. 69000h. 3) Oil lubricated screw compressor Atlas Copco GA15 for spare parts. Documentation available. An on site inspection is possible. Bjdpfx Adozipgve Seli