Used Atlas 1605M for sale (429)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: SKE000052, total length: 1,070 mm, total width: 1,200 mm, total height: 1,960 mm, cooling capacity: 27.82 kW (37.82 HP), The TCX4-90A series from Atlas Copco is a compact all-in-one chiller with an air-cooled condenser with integrated hydro module. The TCX28A chiller is specially designed for cooling water (or a mixture of water and glycol) for a wide range of industrial processes. Crsdpfx Agstq Twnetsg Atlas Copco chiller TCX 28 A (indoor installation / +5°C) with integrated tank and 3 bar pump group Cooling capacity: 27.8 kW (37.2 kW) Absorbed power: 9.35 kW (9.33 kW) Water connection 2" Dimensions: 1067x1200x1960 mm lxwxh Used machine from year of construction 2022, very good condition, fully functional, without warranty

Condition: ready for operation (used), Year of construction: 2002, functionality: unexamined, Screw compressor, Atlas Copco GA250 250 kW Cjdpfszymciex Agtjrg 7.50 bar 42.32 m3/min Year of manufacture: 2002

Condition: excellent (used), Year of construction: 2002, operating hours: 111,219 h, functionality: fully functional, Screw compressor, Atlas Copco GA180VSD Inverter integrated 180 kW 12.50 bar 28.90 m3/min Cjdozxxvxjpfx Agtjrg Year of manufacture: 2002 Operating hours: 111,219

Condition: excellent (used), Year of construction: 2020, overall weight: 224 kg, Vacuum pump / vacuum system Crsdpfx Agjxcb Ixstsg Volume flow rate: 280 m3/h Final pressure: 0.1 mbar Motor: 5.5 kW Vacuum tank: 500 L

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW Cedpfxohabk Ds Agtsrg -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 22,314 h, functionality: fully functional, Oil-free screw compressor, Atlas Copco ZT55VSD Inverter integrated 55 kW 8.6 bar 8.55 m³/min Year of manufacture: 2016 Cedpfozwdt Tjx Agtjrg Operating hours: 22,314 h

Condition: used, Year of construction: 2009, operating hours: 73,000 h, functionality: fully functional, power: 75 kW (101.97 HP), pressure (min.): 4 bar, pressure (max.): 10 bar, ambient temperature (max.): 46 °C, type of cooling: air, Equipment: documentation/manual, type plate available, Product description: GA75P A 10 APB 400 50 Product number: 00000402 | 8152811462 Date of manufacture: 09/30/2009 Model: GA75_08 Product description: GA 75 Brand: Atlas Copco Cooling: Air-cooled (AIR) Electrical approval: IEC (IEC) Energy recovery: Yes (Y) Frequency: 50 Hz (50HZ) Model variant: Workplace (W) Pressure Vessel Approval: CE / ASME (CEASME) Regulation: Elektronikon Graphic (MK5GRAPH) Starter type: Star/Delta (Y/D) (YD) Supply voltage: 400 V (400V) Working pressure: 10 bar (10BAR) Ex works with integrated heat recovery. Credpfxjzvqp Sj Agtsg Current operating hours: approx. 73,000 hours Used machine, sold as is, without warranty.

Condition: used, Year of construction: 2015, operating hours: 49,800 h, functionality: fully functional, power: 75 kW (101.97 HP), pressure (min.): 4 bar, pressure (max.): 9.8 bar, ambient temperature (max.): 46 °C, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Product description: GA75FF A 10 APB 400 50 Product number: 0000090580 | 00000502 | 8153587723 Date of manufacture: 19/03/2015 Model: GA75_12 Product description: GA 75 Brand: Atlas Copco Air receiver mounted / Floor mounted (N) Brand: Atlas Copco (01ATLAS_CO) Commercial power: 75 kW (75KW) Cooling: Air cooled (AIR) Electrical approval: IEC (IEC) Element family: Oil Injected Screw (OIS) Energy recovery: Yes (Y) Frequency: 50 Hz (50HZ) Integrated dryer: Yes (Y) Mk5 expansion module: Yes (Y) Model variant: Workplace Full Feature (W_FF) Pressure vessel approval: CE / ASME (CEASME) Product company: API (API) Credjzvqpfspfx Agtjg Regulation: Elektronikon standard (MK5STD) Starter type: Star/Delta (Y/D) (YD) Supply voltage: 400 V (400V) Working pressure: 10 bar (10BAR) Ex works, the machine is already equipped with the following special equipment: - Integrated refrigerant dryer - Integrated heat recovery - Expansion module Current operating hours: approx. 49,800 hours Used machine, sold as is, without warranty.

Condition: excellent (used), Year of construction: 2016, Manufacturer: Atlas Copco Year of manufacture: 2016 Model: C50 Credpozypxaofx Agtsg

Condition: used, mileage: 1,001 km, first registration: 01/1999, empty load weight: 130 kg, color: red, driver cabin: other, gearing type: other, Year of construction: 1999, Equipment: crane, Vehicle location: Bovenden Includes Atlas swivel head! Construction width approx. 450mm! Crsdpfx Ajzyvd Negteg Capacity approx. 90 liters. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale and errors!

Condition: used, Attachment suited for: Construction machines Crodpfx Ajzxqdhsgtjg

Year of construction: 2018, condition: used, Compressor system Manufacturer: Atlas Copco Type: GA15VSD+FF Year of manufacture: 2018 Technical data Cedpfx Aozu Al Asgtorg Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Year of construction: 2011, condition: used, Compressor system Manufacturer: Atlas Copco Type: GX11FF Crjdpfezuz E Isx Agtsg Year of manufacture: 2011 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 1997, functionality: fully functional, OIL-FREE AIR COMPRESSOR Designed to supply oil-free compressed air for low-pressure industrial applications. TECHNICAL DATA Credozvllnspfx Agtjg Maximum working pressure: 3.5 bar(g) Typical operating pressure: 3.2 bar Input power: 168 / 187 kW Shaft speed: 2,220 / 3,570 rpm Approximate dimensions (L × W × H): 3,000 × 1,600 × 2,000 mm Approximate weight: 4,000 kg Serial number: AIF042384

Condition: used, Year of construction: 2015, operating hours: 2,900 h, Equipment: all wheel drive, MAKE: ATLAS WEYCOR TYPE: 75e S SWING LOADER YEAR: 2015 CE MARKED: YES OPERATING HOURS: 2900 TIRES/UNDERCARRIAGE: 70% POWER: 54KW ENGINE: DEUTZ TD2.9 L04 WEIGHT: 6300KG OPTIONS: 4,000KG LIFTING CAPACITY SWING LOADER 4X4 HYDRAULIC QUICK-CHANGE SYSTEM BUCKET FORKS VERY GOOD CONDITION IMMEDIATELY READY FOR USE ## DUTCH MAKE: ATLAS WEYCOR TYPE: 75e S SWING LOADER YEAR: 2015 CE: YES OPERATING HOURS: 2900 TIRES/UNDERCARRIAGE: 70% POWER: 54KW ENGINE: DEUTZ TD2.9L04 WEIGHT: 6300KG OPTIONS: 4,000KG LIFTING CAPACITY SWING LOADER 4X4 BUCKET FORKS HYDRAULIC QUICK-CHANGE SYSTEM VERY GOOD CONDITION IMMEDIATELY READY FOR USE ## ENGLISH MAKE: ATLAS WEYCOR TYPE: 75e S SWING LOADER YEAR: 2015 CE: YES OPERATING HOURS: 2900 TIRES/UNDERCARRIAGE: 70% POWER: 54KW ENGINE: DEUTZ TD2.9L04 WEIGHT: 6300KG OPTIONS: 4,000KG LIFTING CAPACITY SWING LOADER 4X4 HYDRAULIC QUICK COUPLER BUCKET FORKS VERY GOOD CONDITION IMMEDIATELY READY FOR USE KORENBLIK MACHINERY BV. Crsdjy Ui Ndspfx Agteg VEENWEG 56 7336AG APELDOORN THE NETHERLANDS VAT ID: NL864089764B01

Condition: good (used), electric motor, three-phase motor -Manufacture: Siemens Atlas Copco, electric motor from compressor Atlas Copco type GA 408 Pack -Type: 1RA6 183-2AB 51-Z -Power: 30 kW -Speed: 2925 rpm -Shaft: Ø 55 x 110 mm -Design: B5 -Dimensions: 625/480/H395 mm Crjdpjzul Awjfx Agtjg -Weight: 156 kg

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, Power supply: 400 V. Frequency: 50 Hz. Electrical power: 17.4 kW. Phases: 3 Ph. Maximum compressed-air pressure: 14 bar(e). Maximum compressed-air temperature: 70°C. Permissible ambient temperature: min. 0°C / max. 40°C. Refrigerant: R410A. Refrigerant charge: 10.5 kg. Refrigerant GWP: 2,088. Maximum high-side refrigerant pressure: 40.6 bar. Maximum low-side refrigerant pressure: 30 bar. Certifications: CE / EAC. Cedpszvcdbefx Agterg Indicative airflow for this model: approximately 1,750 l/s, equivalent to around 105 m³/min or 6,300 m³/h. Approximate dimensions: Length: 1,474 mm × Width: 1,579 mm × Height: 2,295 mm. Approximate weight: 910 kg.

Condition: good (used), For sale: a mobile Atlas Copco XAS 60 screw compressor with a Deutz F2L 511 diesel engine. The unit has only 613 operating hours since new. The engine is in very good condition – it starts easily and runs properly. The compressor was imported from Germany. It has not been used for about fifteen years, and the compressor's screw element has seized. We attempted to repair it, and the unit was reassembled, but it currently only generates a pressure of approximately 4 bar. For this reason, it is being sold as damaged, for further repair. It may be an interesting proposition for someone who will undertake the repair of the compressor, or as a source of parts, especially the well-maintained Deutz F2L 511 engine. Engine data: * Manufacturer: Deutz * Type: F2L 511 * Power: 25 kW / 34 HP * Speed: 2800 rpm * Operating hours: 613 hours * Engine is functional, starts and runs properly Crjdpfxszv Ei Hs Agteg The visual condition is appropriate for the age of the unit – visible signs of use, storage, and localized corrosion.

Condition: good (used), Pressure and differential pressure switches, transmitters, monitors, sensors, differential pressure indicators, differential pressure switches -Manufacturer: Atlas Copco, Oil-Water Separation System Air Receiver from Compressor GA 408 Pack Cedpjzt Nt Rsfx Agtjrg -Type: 4 ADS-10 -Pressure: max. 25 bar -Quantity: 2x P/N 1089 x P/N 1089 0416-02 (see photos for connections) -Dimensions: 125/105/H85 mm -Weight: 0.9 kg/pc.

Year of construction: 1980, condition: good (used), Oil-air separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator, air receiver -Manufacturer: Atlas Copco, Oil-Water Separation System Air Receiver from Compressor GA 408 Pack -Type: 1615 2653 Credpfx Agjzt I Rzoteg -Pressure: max. 11 bar -Dimensions: 315/200/H500 mm -Weight: 22.2 kg

Condition: good (used), Year of construction: 1980, Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, pressure vessel, compressor tank, air receiver for oil-air separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator, air receiver -Manufacturer: Atlas Copco, Air tank standing from compressor type GA 408 Pack -Type: 19650295-49 -Contents: 46 l -Operating pressure: 11 bar Cedpfxjzt I I Te Agtsrg -Accessories: incl. attachments, see photos -Dimensions: 520/300/H1010 mm -Weight: 62 kg

Year of construction: 1980, condition: good (used), Standard radiators, car radiators, oil coolers, heat exchangers, compressor radiators, hydraulic oil coolers -Manufacturer: AKG, lightweight metal oil/air cooler with filter from Atlas Copco compressor type GA 408 Pack -Type: 1613 2726/653.92 -Pressure: max. 12 bar Crjdpfxjzt Ip Ds Agtog -Dimensions: 910/400/H700 mm -Weight: 49 kg

Condition: excellent (used), ATLAS COPCO GA 110+ FF Screw Air Compressor ATLAS COPCO GA 110+ FF industrial screw air compressor, designed for the continuous and efficient production of compressed air in industrial facilities with high and constant demand. The GA series from Atlas Copco uses lubricated rotary screw technology, especially suitable for industrial applications where a reliable supply of compressed air is required for long operating periods. This unit corresponds to the FF (Full Feature) version, a configuration that integrates compressed air treatment within the unit itself, providing a compact solution for air generation and conditioning. MAIN FEATURES -Manufacturer: ATLAS COPCO -Model: GA 110+ FF -Type: Rotary screw air compressor -Configuration: Full Feature (FF) -Nominal power associated with the model: 110 kW -Continuous compressed air production -Lubricated rotary screw technology -Integrated cooling system -Air dryer integrated in the FF configuration -Condensate separation -Air filtration and treatment system -Electronic control via display / integrated controller -Monitoring of operating parameters -Complete, soundproof enclosure -Compact, packaged design -Robust construction for continuous industrial operation -Direct connection to compressed air networks -Access via panels for maintenance OPERATION Atmospheric air is drawn into the compressor and directed to the screw element, where two rotors progressively compress the air until it reaches the established working pressure. Crjdpfx Aewnxziegtsg Subsequently, the necessary stages of oil separation, cooling, and air conditioning are carried out. In this GA 110+ FF version, the integrated dryer reduces the humidity present in the compressed air before it is fed into the factory network, eliminating the need to install a separate dryer in many configurations. The system can supply a general compressed air network intended for: -Pneumatic actuators and cylinders -Automatic valves -Filling and packaging equipment -Process machinery -Pneumatic transport systems -Instrumentation -Air-powered cleaning equipment -Automatic production lines APPLICATIONS Especially suitable for food processing plants, beverage factories, canning factories, packaging facilities, and other industries with a significant demand for compressed air. The combination of ATLAS COPCO, screw technology, 110 kW power, and Full Feature configuration provides a centralized solution for the supply of compressed air in industrial facilities. Machine available for inspection. Additional technical information, working pressure, flow rate, operating hours, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage Csdpfx Aeztx Anogtjrg -Manufacturer: Atlas Copco, screw block compressor stage from compressor type GA 408 Pack -Screw block: Type GA 408 -Final pressure: max. 8 bar -Shaft: Ø 40 x 55 mm -Dimensions: 760/490/H500 mm -Weight: 160 kg

Condition: used, Year of construction: 2008, operating hours: 85,394 h, functionality: fully functional, machine/vehicle number: APF 136194, overall weight: 2,550 kg, total length: 2,900 mm, total width: 1,450 mm, total height: 2,200 mm, space requirement length: 3,000 mm, space requirement width: 1,600 mm, motor manufacturer: ABB, fuel type: electric, ATLAS COPCO ZT 55 VSD Screw Compressor with Inverter, 18.5 kW, 3.35 m3/min, 13 bar Our company offers a professional level of service and high-quality products, all of which have been “tested” in the market, guaranteeing a successful partnership with you. We offer a warranty on used compressors and dryers! Our strength is our 24/7 compressor service. ATLAS COPCO GA18VSD Screw Compressor with Inverter, 18.5 kW, 3.35 m3/min, 13 bar Technically sound and ready for operation. I also have a dryer with a filter set. Cjdpfx Ajy Amh Hogterg A preferential price is offered for the combined purchase.