Used Atlas Ar50 for sale (447)

Condition: used, functionality: limited functionality, Year of construction: 2011, operating hours: 1,637 h, Compressor Atlas Copco XAS 97 DDG, year of manufacture 2011, 1637 operating hours, volume flow rate 5.3 m³, emergency power 12.5 kVA, connections: 1 x 230 volts, 2 x 400 volts, serial number YA3062560C0262053, operating permit and registration documents available, 1 torsion bar axle is bent, V-belt cover is missing, fan grill is missing. Godpjzbiicsfx Al Nsiu

Condition: ready for operation (used), functionality: limited functionality, Year of construction: 2011, operating hours: 1,192 h, Equipment: soot filter, Compressor Atlas Copco XAS 67 DDG, built in 2011, 1192 operating hours, volume flow 3.5 m³, emergency power 12.5 kVA, connections 1 x 230 volts, 2 x 400 volts, serial number YA3062566B0165583, approval available, the fuse blows when the emergency power is switched on, downstream soot filter SMF-MR Gisdpov Rbufefx Al Nou

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 1,680 h, Compressor Atlas Copco XAS 67 DDG, year of manufacture 2012, 1680 operating hours, volume flow 3.5 m³, emergency power 12.5 Kva, connections 1 x 230 Volt, 2 x 400 Volt, Ser.No.YA3062560C0250310 Gijdpfx Aju Dh Tljl Neu

Condition: used, Year of construction: 2013, functionality: fully functional, Atlas Copco GA 5 VSD screw compressor, manufactured in 2013, from ongoing operation. The speed-controlled VSD technology adjusts the delivery rate according to demand, thus noticeably saving energy during partial load operation. An operating log with documented maintenance and operating hours was kept throughout the entire period of use (see photo). Condition: • Used, well-maintained condition • Regularly serviced • Operating log available • Technically in use until recently Location: Selters. Shipping or collection from the location is possible. Technical data: Manufacturer: Atlas Copco Model: GA 5 VSD Year of manufacture: 2013 Gijdpfxjza Ah Ao Al Neu Drive power: 5.5 kW Voltage: 400 V / 50 Hz / 3-phase Max. operating pressure: 13 bar Control: Elektronikon Speed control: VSD (frequency-controlled) Weight: approx. 275 kg Refrigerant: R134a CE marking: present Location: Selters

Condition: excellent (used), Year of construction: 2004, operating hours: 114,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters Gjdpfx Aerp D Uxel Njiu machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: good (used), Year of construction: 1998, operating hours: 10,300 h, overall weight: 475 kg, fuel type: electric, volume flow: 186 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, 22kw 3.1m3/min ATLAS COPCO GA22 screw compressor Continuously serviced and maintained 22kw screw compressor for sale. Manufacturer: Atlas Copco GA22 SP Gisdpfstxpd Iex Al Nsu operating hours: 10350 Year of manufacture: 1999 Capacity: 3.1 M3/minute, pressure: 10 bar Power 22kw main engine speed: 3,000/min Net weight: 405 Kg Dimensions: mm (LxWxH) Noise level: 66 dB service booklet, circuit diagram.

Condition: excellent (used), Year of construction: 2002, operating hours: 122,000 h, functionality: fully functional, overall weight: 3,000 kg, total length: 25,400 mm, total width: 1,600 mm, total height: 2,000 mm, power: 165 kW (224.34 HP), fuel type: electric, volume flow: 1.56 m³/h, operating pressure: 8 bar, noise level: 65 dB, Equipment: documentation/manual, refrigerant dryer, type plate available, Continuously serviced, excellent condition. Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Year of construction: 2002 Uptime: 122499 Last service: September 20, 2023. Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Gedpfx Alorn S Hpo Neiu Max. operating pressure: 10.5 bar Empty volume: 199 l

Condition: used, Year of construction: 1994, 1994 | Atlas Copco Qas 28 | Used Generator Set 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 4000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 23 inspection points 18 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Generator Set 30 kVA, 77A/44A 230V/400V. Circuit breakers 40A and 16A. A 32 A socket added on the fly. Number of hours unknown. Works well. Year 1994. 📄 Want to see the full inspection, extra photos, or a video? Gedpfx Asy Rukfel Noiu Tip: The reference "39926 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, power: 125 kW (169.95 HP), fuel type: diesel, Year of construction: 2012, operating hours: 14,463 h, Atlas 270 MH – Long reach – with grab, swivel, and magnet functions – Hydraulic cabin – 4 stabilizers – Total payload: 29,500 kg – 14,464 operating hours = Further information = Year of manufacture: 2012 Drive type: Wheeled CE marking: Yes Gsdpfxszacxbj Al Nsiu Reference number: 52 = Company information = We are located between Antwerp and Brussels, along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: used, Year of construction: 2022, machine/vehicle number: AC20-03842, Unladen weight: 1,940 kg, output: 13.4 kW, with hydraulic loading shovel and 2 trench buckets, recorded operating hours: 3,500 h Gjdpoy Rvm Usfx Al Nsiu

Condition: used, Year of construction: 1977, machine/vehicle number: 132M15957, gross vehicle weight: 12,000 kg; axle load: 8,000 kg each Gijdpfx Aloy Rvq Te Nju

Condition: used, machine/vehicle number: 1549885, Own weight: 239 kg, working width: approx. 2000 mm Gijdpjy Rvrwjfx Al Neu

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 183 h, Atlas Copco XAS88 Gsdpfx Aloy E Nl To Noiu Price Net: €12,999 negotiable Gross: €15,468 negotiable Year of manufacture: 2021 Operating hours: 183 Very good condition, see pictures 3 outlets / 7 bar Price is net plus 19% VAT Flow rate: 4.5 m³/min Engine: Kubota diesel Weight: 749 kg Condition as seen in pictures Papers available (Certificate of Conformity / Registration Certificate Part 1) Adjustable tow bar with ball coupling Sale to businesses/trade only An invoice with VAT shown separately will be issued. Please also see our other offers! Sale without warranty, guarantee or return All details, images, and information are not guaranteed specifications and serve exclusively for general description purposes. The information has been provided to the best of our knowledge and belief but cannot be guaranteed. Offer is subject to change without notice. Errors, alterations, and prior sale reserved.

Condition: excellent (used), power: 103 kW (140.04 HP), operation weight: 12,400 kg, Year of construction: 2012, excellent condition Gijdpfjzcptqsx Al Nsu

Condition: used, functionality: fully functional, power: 95 kW (129.16 HP), fuel type: diesel, color: orange, operation weight: 16,000 kg, tire size: 315/70 R22,5, Year of construction: 2014, operating hours: 10,800 h, Equipment: adjustable boom, air conditioning, centralized greasing system, quick-change device, rear view camera, Atlas 150W mobile excavator Year of manufacture: 2014 10,800 hours 95 kW Deutz engine OQ65 SW, fully hydraulic Approximate weight: 16,000 kg All lines/hoses Adjustable boom Gedpfozbb Ecjx Al Nsiu Air conditioning Camera Central lubrication system Tires: 315/70 R22.5 (wide) Track width: 255 cm

Condition: used, Year of construction: 1994, operating hours: 2,674 h, functionality: fully functional, Atlas Copco XAS 55 construction compressor / screw compressor - manufactured in 1994 - including accessories Commercial sale of a mobile Atlas Copco construction compressor as a complete package! For sale is a reliable and robust screw compressor from the renowned manufacturer Atlas Copco, model XAS 55. The unit comes from the fleet of Fischer Bau GmbH, is mounted on a practical single-axle chassis with a drawbar, and is ready for immediate use on construction sites. Vehicle data & technical specifications (according to the nameplate & instruments): Manufacturer: Atlas Copco Model: XAS 55 Year of manufacture: 1994 Gsdpfxjzbu Rre Al Njiu Operating hours: 2,674.5 hours (as read on the original VDO hour meter) Design: Mobile compressor on trailer hitch (single axle) Extensive accessories included (as shown in the pictures): Large reel of yellow compressed air hose with matching couplings A large set of heavy-duty insert tools for demolition hammers / pneumatic hammers (numerous pointed chisels, flat chisels, and spade chisels, see pictures) Condition: The compressor is in used condition, with normal optical signs of wear and tear appropriate for its age and intended use (paint wear/scratches on the yellow housing). The fittings and gauges are clearly readable. A newer model is also available for sale! Legal notes & terms of sale Commercial sale by Fischer Bau GmbH. The stated price is a gross price (including 20% VAT). You will receive a proper invoice with VAT shown. Warranty note: For companies / entrepreneurs (B2B): The sale is made with the complete exclusion of any warranty, guarantee, and liability for defects. Condition & inspection: Sold as seen and tested. An inspection and functional test are possible at Weissenbach 153, 8967 Haus im Ennstal after prior arrangement.

Condition: used, Year of construction: 1999, operating hours: 1,233 h, functionality: fully functional, machine/vehicle number: 7300, Equipment: type plate available, Atlas Copco XAS 66 PD construction compressor / screw compressor – only 1,233 hours – including accessories Commercial sale of a mobile Atlas Copco construction compressor in a complete, ready-to-use package! For sale is a powerful and compact screw compressor from the quality manufacturer Atlas Copco, model XAS 66 PD. The unit comes from the fleet of Fischer Bau GmbH, is mounted on a sprung single-axle chassis with a car tow hitch, and can be flexibly transported to any work site. Vehicle data & technical data: Manufacturer: Atlas Copco Model: XAS 66 PD / XAS 66 Year of manufacture: 1999 Operating hours: Only 1,233 hours (original reading according to VDO operating hour meter) Drive / construction: Mobile compressor on trailer chassis with support wheel Extensive accessory package included (as shown): Large roll of yellow compressed air hose (wound on an integrated hose reel) Several heavy-duty pneumatic demolition hammers / chisel hammers (ready for use, included in the package) A large assortment of matching insert tools (pointed chisels and flat chisels) Condition: The compressor is in used, well-maintained condition and suitable for its intended purpose. The housing shows the normal wear and tear typical of construction sites. The engine and compressor components inside are very clean, and the switches and displays are perfectly legible. Godpfxszbu N Uo Al Njiu Legal notes & terms of sale Commercial sale by Fischer Bau GmbH. The stated price is a gross price (including 20% VAT). You will receive a proper invoice with VAT shown. Warranty note: For companies / entrepreneurs (B2B): The sale is made with the complete exclusion of any warranty, guarantee and liability for defects. Condition & inspection: Purchased as seen and tested. An inspection and functional test are possible in Weissenbach 153, 8967 Haus im Ennstal after prior arrangement.

Condition: used, operating hours: 1,597 h, functionality: fully functional, fuel type: diesel, color: yellow, output frequency: 50 Hz, type of output current: three-phase, Commercial sale of an extremely robust and mobile Atlas Copco diesel generator! For sale is a sound-insulated emergency power generator from the renowned manufacturer Atlas Copco, model QAS 18. The unit comes from the inventory of Fischer Bau GmbH and is perfectly suited for autonomous power supply on construction sites, in agriculture, or as a reliable emergency power generator for crisis situations. Technical data & features (according to nameplate & instruments): Manufacturer: Atlas Copco Model: QAS 18 Fuel: Diesel Year of manufacture: 2000 Operating hours: Only 1,597.6 hours (original reading from the Hobbs-Quartz hour meter) Control panel / instruments: Gedszbu I Ropfx Al Njiu Analog displays for ammeter (A) and voltmeter (V) Frequency display (Hz / RPM) Fuel gauge (VDO) Ignition switch and clear indicator lights Connections: Existing heavy-duty (CEE) and Schuko sockets directly integrated on the outside, protected. Design: Sound-insulated housing, mounted on a sturdy skid frame with integrated forklift pockets for easy transport and quick relocation by crane or forklift. Condition: The generator is in used condition, commensurate with its intended use. The yellow housing shows normal optical signs of wear and superficial scratches. The control panel is in a clean condition, and all instruments are clear and easily readable. Legal notes & terms of sale Commercial sale by Fischer Bau GmbH. The stated price is a gross price (including 20% VAT). You will receive a proper invoice with VAT shown. Warranty note: For companies / entrepreneurs (B2B): The sale is made with complete exclusion of any warranty, guarantee, and liability for defects. Condition & inspection: Purchased as inspected and tested. An inspection and functional test can be arranged in Weissenbach 153, 8967 Haus im Ennstal, by prior appointment.

Condition: good (used), Year of construction: 2005, functionality: fully functional, power: 55 kW (74.78 HP), type of cooling: air, Excellent screw compressor with a built-in refrigerated dryer, which has only run for a few hours in the last 10 years as the production facility where it was located was shut down. Gedpfsy U Iwgsx Al Noiu

Condition: used, Year of construction: 1988, operating hours: 2,000 h, functionality: fully functional, overall weight: 850 kg, motor manufacturer: Deutz, Atlas Copco XAS60 construction compressor Year of manufacture: 1988 2,000 operating hours Giedpfx Alszau Nfs Nou Approx. 850 kg 9.3 bar Deutz 2-cylinder engine

Condition: used, functionality: fully functional, Set of impact wrenches in original case with accessories (hose, manual, socket inserts). Professional tool for loosening stubborn fasteners in automotive, steel construction, or industrial applications. Features speed/torque control on the tool. Total price: EUR 380 net, negotiable, for all 3 units + accessories. Individual sale of the sets is possible (approx. EUR 150-180 per case set). Technical specifications: - Quantity: 2 sets in a case + 1 additional wrench with carrying handle (visible in the photo) - Drive: Compressed air - Accessories: Hose, operating manual, original bag - Brands: Industrial (Atlas Copco / Ingersoll-Stil) - Condition: fully functional Gsdpfx Alozacfhs Njiu Pickup/transport: Shipping as a package is possible, or self-pickup in Stralsund. Individual sale is possible.

Condition: used, Year of construction: 2015, operating hours: 2,900 h, Equipment: all wheel drive, MAKE: ATLAS WEYCOR TYPE: 75e S SWING LOADER YEAR: 2015 CE MARKED: YES OPERATING HOURS: 2900 TIRES/UNDERCARRIAGE: 70% POWER: 54KW ENGINE: DEUTZ TD2.9 L04 WEIGHT: 6300KG OPTIONS: 4,000KG LIFTING CAPACITY SWING LOADER 4X4 HYDRAULIC QUICK-CHANGE SYSTEM BUCKET FORKS VERY GOOD CONDITION IMMEDIATELY READY FOR USE ## DUTCH MAKE: ATLAS WEYCOR TYPE: 75e S SWING LOADER YEAR: 2015 CE: YES OPERATING HOURS: 2900 TIRES/UNDERCARRIAGE: 70% POWER: 54KW ENGINE: DEUTZ TD2.9L04 WEIGHT: 6300KG OPTIONS: 4,000KG LIFTING CAPACITY SWING LOADER 4X4 BUCKET FORKS HYDRAULIC QUICK-CHANGE SYSTEM VERY GOOD CONDITION IMMEDIATELY READY FOR USE ## ENGLISH MAKE: ATLAS WEYCOR TYPE: 75e S SWING LOADER YEAR: 2015 CE: YES OPERATING HOURS: 2900 TIRES/UNDERCARRIAGE: 70% POWER: 54KW ENGINE: DEUTZ TD2.9L04 WEIGHT: 6300KG OPTIONS: 4,000KG LIFTING CAPACITY SWING LOADER 4X4 HYDRAULIC QUICK COUPLER BUCKET FORKS VERY GOOD CONDITION IMMEDIATELY READY FOR USE KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN THE NETHERLANDS Godpfxey Ui Ndj Al Njiu VAT ID: NL864089764B01

Condition: like new (used), Atlas Copco / Scheugenpflug Gedoy Naf Espfx Al Njiu The entire system is unused and in like-new condition Model: VDS P6030 Automatic processing of a complete cycle from loading to unloading Mixing of two components (e.g., resin and hardener) directly in-process Precise application of material at defined positions on the workpiece Component handling via a 3-axis system (X, Y, Z) Operation in automatic, semi-automatic, and manual modes Technical data: Power supply: 400 V AC, 50/60 Hz Rated current: 13.6 A Power consumption: 8.5 kVA Fusing: 3 × 32 A Control voltage: 24 V DC Operating pressure: 6 bar Pressure monitoring: 4 bar Compressed air connection: 6 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP21 Foundation slope: max. 0.05% Clearance around machine: 0.8 m Clearance in front of control cabinet: 1.2 m Width: 1660 mm x Height: 2305 mm x Depth: 1315 mm Weight: 600 kg Sound pressure level: ≤ 70 dB(A) Model: A310 Technical data: Tank volume: 60 l resin and 20 l hardener Agitator in each tank Vacuum sensor for each tank Level sensors including overfill protection Suction valve per tank Sight glass with illumination Vacuum degassing directly in tank Material circulation to prevent sedimentation Optional tank heating Pneumatically driven piston pumps Delivery volume approx. 294 cm³ per stroke 1 or 2 pumps per tank possible Continuous dosing with dual pump system Pump variants: horizontal and vertical, suitable for highly viscous materials Vacuum generation via vacuum pump or ejector Oil separator to protect vacuum pump Control via SCP touch panel Operating modes: Automatic, pause, external control Material circulation during pause mode Possible integration to external control via interface Monitoring of production time, system availability, and material consumption Calculation of remaining material availability Power supply: 230 V or 400 V AC Operation outside EU with transformer possible Operating temperature: +5 °C to +40 °C With vacuum pump: +10 °C to +40 °C Humidity: 10 to 80 percent Protection class: IP20 Dimensions: Width 700 mm x Height 1950 mm x Depth approx. 1165 mm Weight: approx. 400 kg Model: LP804 Technical data: Application: Conveying and preparation of 1K and 2K dispensing materials (low to medium viscosity, also abrasive) Tanks have 50 and 20 liter capacity Control voltage: 24 V DC Power supply: per wiring diagram Rated current: per wiring diagram Power consumption: per wiring diagram Fusing: per wiring diagram Operating pressure: 6 bar Pressure monitoring: 4 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP54 System protection class: IP20 Installation surface: max. 0.5% slope Clearance around system: 0.8 m Clearance in front of control cabinet: 1.2 m Dimensions: Width: 1500 mm x Height: 2050 mm x Depth: 770 mm Weight: 430 kg Noise level: ≤ 70 dB(A) Condition: unused Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Condition: refurbished (used), Year of construction: 2006, power: 90 kW (122.37 HP), fuel type: electric, volume flow: 1,000 m³/h, pressure (max.): 7.5 bar, type of cooling: air, We offer this refurbished Atlas Copco GA90 rotary screw compressor, year 2006. Gisdpoyxy Dasfx Al Nsu The compressor was imported from Europe and has not been operated in Ukraine. Comprehensive repairs have been carried out, including replacement of the screw block bearings and gearbox (multiplier) bearings, shaft seal replacement and bushing, replacement of the flexible coupling for torque transmission, replacement of the electric motor bearings, as well as replacement of all filters and oil. A new inlet valve with a new solenoid valve has been fitted. The thermostatic valve has been overhauled with a new repair kit, as well as the minimum pressure valve, oil-stop valve, check valve with repair kits replaced, and the condensation drain valve has also been serviced. A new Elektronikon compressor control unit has been installed. The hydraulic hoses have been replaced and the oil system has been cleaned. Delivery across Europe can be arranged.

Condition: excellent (used), Year of construction: 2012, operating hours: 72,651 h, functionality: fully functional, Screw Compressor Atlas Copco GA37VSDFF Giedpfx Aey Rva Ijl Nju Integrated inverter and dryer 37 kW 12.80 bar 7.37 m³/min Year of manufacture: 2012 Operating hours: 72,651