Used Atlas for sale (426)

Condition: like new (used), Atlas Copco / Scheugenpflug The entire system is unused and in like-new condition Model: VDS P6030 Automatic processing of a complete cycle from loading to unloading Mixing of two components (e.g., resin and hardener) directly in-process Precise application of material at defined positions on the workpiece Component handling via a 3-axis system (X, Y, Z) Djdpjy Naf Eofx Aitekp Operation in automatic, semi-automatic, and manual modes Technical data: Power supply: 400 V AC, 50/60 Hz Rated current: 13.6 A Power consumption: 8.5 kVA Fusing: 3 × 32 A Control voltage: 24 V DC Operating pressure: 6 bar Pressure monitoring: 4 bar Compressed air connection: 6 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP21 Foundation slope: max. 0.05% Clearance around machine: 0.8 m Clearance in front of control cabinet: 1.2 m Width: 1660 mm x Height: 2305 mm x Depth: 1315 mm Weight: 600 kg Sound pressure level: ≤ 70 dB(A) Model: A310 Technical data: Tank volume: 60 l resin and 20 l hardener Agitator in each tank Vacuum sensor for each tank Level sensors including overfill protection Suction valve per tank Sight glass with illumination Vacuum degassing directly in tank Material circulation to prevent sedimentation Optional tank heating Pneumatically driven piston pumps Delivery volume approx. 294 cm³ per stroke 1 or 2 pumps per tank possible Continuous dosing with dual pump system Pump variants: horizontal and vertical, suitable for highly viscous materials Vacuum generation via vacuum pump or ejector Oil separator to protect vacuum pump Control via SCP touch panel Operating modes: Automatic, pause, external control Material circulation during pause mode Possible integration to external control via interface Monitoring of production time, system availability, and material consumption Calculation of remaining material availability Power supply: 230 V or 400 V AC Operation outside EU with transformer possible Operating temperature: +5 °C to +40 °C With vacuum pump: +10 °C to +40 °C Humidity: 10 to 80 percent Protection class: IP20 Dimensions: Width 700 mm x Height 1950 mm x Depth approx. 1165 mm Weight: approx. 400 kg Model: LP804 Technical data: Application: Conveying and preparation of 1K and 2K dispensing materials (low to medium viscosity, also abrasive) Tanks have 50 and 20 liter capacity Control voltage: 24 V DC Power supply: per wiring diagram Rated current: per wiring diagram Power consumption: per wiring diagram Fusing: per wiring diagram Operating pressure: 6 bar Pressure monitoring: 4 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP54 System protection class: IP20 Installation surface: max. 0.5% slope Clearance around system: 0.8 m Clearance in front of control cabinet: 1.2 m Dimensions: Width: 1500 mm x Height: 2050 mm x Depth: 770 mm Weight: 430 kg Noise level: ≤ 70 dB(A) Condition: unused Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions. Dkodsziizmopfx Aitep

Condition: excellent (used), Year of construction: 2004, operating hours: 59,690 h, functionality: fully functional, Screw compressor Atlas Copco ZR90VSDFF Inverter and dryer integrated. Dkedsyuvwaspfx Aitsp 90 kW 8.75 bar 14.70 m³/min

Condition: used, 2 oil-free screw compressors for the production of sterile compressed air. Of these: - Compressor 1 (year of manufacture 2006): frequency-controlled with built-in dryer - Compressor 2 (year of manufacture 1992): with downstream adsorption dryer (Atlas Copco, 2003) Additional title: Compressed air generation with screw compressors; manufactured between 1992-2006 Capacity compressor 1: 5.952 m³/min, with a final pressure of 8.4 bar Capacity compressor 2: 4,982 m³/min, with a final pressure of 8.0 bar Features: 2 screw compressor (one of which has a built-in dryer and variable-speed drive, and one with a separate dryer) Dksdpfx Aijzkfw Tjtep

Condition: used, Year of construction: 2013, Overview  This low-pressure air compressor was manufactured in 2013 by the Swedish company Atlas Copco, a global leader in industrial compressed air systems. The GA132 VSD model delivers up to 24.1 m³/min of air at a maximum pressure of 8.5 bar. The unit remains installed and connected, is in excellent operating condition, and is immediately available. The annual maintenance was completed in August 2025, and spare parts are included. An Atlas Copco air dryer can also be provided upon request. Technical data  - Operating Pressure: 7–8.5 bar - Air Capacity: 24.1 m³/min - Power Supply: 132 kW - Weight: 4,075 kg - Condition: Excellent, annual maintenance completed August 2025 - Optional equipment: Atlas Copco air dryer available Dodpfx Asyb Thvoitjkp - Status: Installed and connected, fully functional

Condition: used, Year of construction: 2012, Overview  This low-pressure air compressor was manufactured in 2012 by the Swedish company Atlas Copco. The GA132 VSD model delivers up to 24.1 m³/min at a maximum pressure of 8.5 bar. The unit was fully reconditioned in 2025, including the installation of a new HMI, and is in excellent working condition. It remains installed and connected, can be inspected on-site, and is immediately available. Spare parts are included, and an Atlas Copco air dryer can be supplied optionally. Dedpfxjyb Thij Aitekp Technical data  - Operating Pressure: 7–8.5 bar - Air Capacity: 24.1 m³/min - Power Supply: 132 kW - Weight: 4,075 kg - Condition: Fully reconditioned in 2025 (new HMI) - Additional equipment: Optional Atlas Copco air dryer - Status: Installed and connected, fully functional - Availability: Immediate

Condition: used, Year of construction: 2012, Overview This industrial air dryer was manufactured in 2012 by the Swedish company Atlas Copco. The FD760 VSD model is a refrigeration-type dryer designed for continuous operation in compressed air systems up to 14 bar, with a maximum flow capacity of 760 L/s. The unit is still installed and connected, has been regularly maintained, with the latest maintenance completed in August 2025, and is in excellent operating condition. It is immediately available and can be inspected on site. Technical data  - Application: Air dryer for 7 7-bar low-pressure compressor - Flow Capacity: 760 L/s Dkedpoxrnn Dsfx Aitop - Operating Pressure: Up to 14 bar - Power Supply: 5.6 kW - Refrigerant: R410A - Weight: 380 kg

Condition: used, Year of construction: 2009, Overview  This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data  - Years of Manufacture: 2009 – 2013 - Application: Industrial compressed air system - Total Capacity: 2 × 24.1 m³/min - Maximum Pressure: 8.5 bar - Power Supply: 274.8 kW Dkedpfjxrc Acex Aitsp Scope of Delivery  - Compressor | Atlas Copco | GA132 VSD | 2013 - Compressor | Atlas Copco | GA132 VSD | 2012 - Air dryer | Atlas Copco | FD160 VSD | 2012 - Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P3500i power generator The Atlas Copco P3500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 3500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood, CE compliant noise level, quiet Power sockets Electric key start (12V) Inverter technology, stable voltage and frequency Instrumentation, voltmeter, hour meter Circuit breaker Wheels Engine alarm: low oil level, overload Intelligent speed control for fuel efficiency Connections for parallel operation (parallel operation kit with cables optionally available) Voltage 230V / 50Hz Peak power 3.3 Rated power 3.0 Tank capacity (l) 10.0 Starter type electric / cable Weight 45.0 Fuel Gasoline Dksdpol R Hz Sjfx Aitsp Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 240/120V Twist Lock

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P2500i power generator The Atlas Copco P2500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 2500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood CE compliant noise level, quiet Power sockets Inverter technology, stable voltage and frequency Engine alarm: low oil level, overload Speed control for fuel efficiency Connections and cables for parallel operation Voltage 230V / 50Hz Peak power 2.5 Rated power 2.3 Dsdol R Hy Aepfx Aitskp Tank capacity (l) 4.0 Starter type pull starter Weight 27.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 120V 20A | 1x Nema 120V Twist Lock

Condition: good (used), Year of construction: 1998, operating hours: 1,329 h, fuel type: diesel, motor manufacturer: Yanmar, Field of application: Construction Drive: Wheel Empty weight: 3.380 kg Number of owners: 1 Technical condition: good Visual appearance: good Drill equipment: Tank, Control Panel, Steel canopy Production country: NL Please contact Michael Overmeer for more information Dkjdpfxeygwfis Aitop = Additional options and accessories = - Control Panel - Steel canopy - Tank = Remarks = Atlas-Copco with 1.329 operating hours mounted on a trailer year of construction december 1998 with a hydraulically operated light tower (9 meters), hydraulic support legs and a hydraulic nose wheel. Changes and typographical errors reserved.

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar Dkedpjhabk Djfx Aitep -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Condition: good (used), Pneumatic double diaphragm pump -Fast venting and immediate suction of the medium -Dry running without: damage -Hermetically sealed for: moisture-sensitive liquids -Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces: -Air max. Pressure: bar -Air connection: 1 "inch -Water output: l/min Dkjdpfxsdwf S Us Aitep -Water max. Pressure: bar -Connection: B coupling -Dimensions: 480/400/H530 mm -Weight: 32 kg

Year of construction: 2010, condition: good (used), Oil/water separator, oil-water separation system Dksdpfxob A Sgks Aitep -Dimensions: 660/260/H700 mm -Weight: 18 kg

Condition: used, Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab -Bucket width: 600 mm -Contents: 400 l -Opening width: 1400 mm -complete: with rotary servo Dkjdpfx Aisx R Sv Eotep -Mounting bolt: Ø 80 mm -Intermediate mounting dimension: 340 mm -Weight: 700 kg

Year of construction: 1985, condition: good (used), Compressor, compressed air unit, piston compressor -Manufacturer: Atlas Copco, oil-free piston compressor type OIL FREE AIRLET LE 7 N -Motor power: 4 kW -Flow rate: max. 312 l/min -Max. pressure: 10 bar -Pressure vessel: 250 liters Dedpfxsy Tu Trs Aitskp -Dimensions: 1400/560/H1180 mm -Weight: 200 kg

Condition: good (used), Digging bucket, excavator bucket, demolition bucket Dodpfjb A I Rcjx Aitskp -Width: 600 mm -Height: 600 mm -Depth: 800 mm -Intermediate mounting dimension: 255/200 mm -Bore: Ø 45/50 mm -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 160 kg

Condition: good (used), Digging bucket, excavator bucket, demolition bucket -Design: stable -Width: 570 mm -Height: 450 mm -Depth: 600 mm -Intermediate mounting dimension: 160 mm -Hole spacing: 220 mm -Bore: Ø 45 mm Dksdsb A I Inepfx Aitsp -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 130 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder Dodpegr E R Aefx Aitskp -Manufacturer: Atlas Copco, Standard cylinder type C4-200-40 -Stroke travel: 200 mm -Piston rod: Ø 40 mm -Dimensions: 330/280/H510 mm Total weight: 33 kg

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder Djdpfsgrzvkex Aitskp -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 -Stroke: 240 mm -Piston rod: Ø 40 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 320/280/H470 mm -Weight: 34 kg/piece

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder Dsdpefbnkaofx Aitjkp -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 410/55/H55 mm -Weight: 1.5 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 100/65/H65 mm -Weight: 0.75 kg/piece Dkedpfx Aisfbmu Sstop

Condition: used, Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley Dkjdpfx Aod N Rt Djitep -Barrier width: max. 100 mm -Payload: 2500 kg -Dimensions: 327/200/H270 mm -Weight: 27 kg

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200 Dkedpogr E R Uofx Aitsp -Stroke: 194 mm -Piston rod: Ø 40 mm -Total dimensions: 220/265/H645 mm -Total weight: 24 kg

Year of construction: 2005, condition: used, Balancers, machine balancers, spring balancer, cable pulley, counterbalance weight balancers Djdpfx Aisgggy Estekp -Manufacturer: Atlas Copco, type RIL 10C -Load capacity: 2.0 - 5.0 kg -Dimensions: 200/250/70 mm -Own weight: 2.6 kg