Used Weiss Wm250V for sale (127)

Condition: refurbished (used), Year of construction: 2008, rotational speed (max.): 18,000 rpm, WEISS / SPL Motor Spindle HSK-A63 175389A 18000 rpm Manufacturer: Weiss Spindeltechnologie GmbH / SPL Spindel und Präzisionslager GmbH Type: Motor spindle Spindle type: 175389A Tool interface: HSK-A63 SPL type: DR-WE-175-M-W-18-46 Serial number: 60201670 Ljdpfxjyrz Rye Alcohk Year of manufacture: 2008 Maximum speed: 18000 rpm Motor: AC135/200/4 Protection rating: IP54 Cooling: Water cooling Coolant flow rate: 8 l/min Temperature sensor: KTY 84-130, PTC Diameter D1: 179.7 mm Diameter D2: 262 mm Diameter LB: 285 mm Total length L: 1026 mm Spare part number: 90010000013

Condition: excellent (used), Weiss Umwelttechnik WT-600/70/5 Temperature Test Chamber -70°C to +180°C Water-cooled Available for sale is a pre-owned temperature test chamber from Weiss Umwelttechnik. The unit is fully functional and has been tested. This is a temperature-only test chamber without humidity control. The chamber is suitable for testing components, electronics, and materials under extreme temperature conditions. It is widely used in industry, development, and quality assurance processes. Ledpfey At Sxjx Alcjhk The temperature range spans from -70°C to +180°C. The device offers rapid heating and cooling rates and uses internal air circulation to ensure uniform temperature distribution within the chamber. Cable ports of 125 mm and 50 mm are included. Technical data: Model: WT-600/70/5 Cooling / heating operation: -70°C to +180°C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 6 K/min External dimensions (with hinges and door lock): Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions (without hinges and door lock): Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Test chamber volume: approx. 600 liters Electrical connection: 3/N/PE AC 400V ±10% 50Hz Nominal power: 16 kW Nominal current: 19 A Main fuse required: 29 A slow-blow Permissible test load: Total rack capacity: 80 kg Chamber floor: 80 kg, Shelf: 40 kg Refrigerant: R 404A/R23 Weight: 675 kg For your safety as a buyer, please note the following: The following procedures are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), We offer a climatic test chamber from Weiss with Feucht! The climatic test chamber was only serviced by Weiss / Vötsch in December 2020 and was still in use until December. 2021 the test sticker! All tests were carried out, another test run was carried out in our house, the humidity and temperature were checked with calibrated test equipment. The climatic test chamber has been serviced once a year and is in perfect condition! The logbook is attached Lodeg Dcfzopfx Alcshk WHITE 1500SB / 010JU / 40DU Temperature range -40 ° C - + 180 ° C Humidity / climate: 15%-95% / 10°C - 95°C Test space: 1500 liters Inner dimensions: 1490 mm deep, 1100 mm wide, 945 mm high External dimensions: 2470mm wide, 2000mm high, 1450 wide Weight approx. 1100kg Refrigerant: R404a 2.00kg The cabinet has no feet and is stable on a frame If you have further questions, you can contact us at any time

Condition: good (used), Weiss Type: Walk-in Climate Simulation Chamber WK 50 / 40-120 Ledpfx Alszg Txqscehk Technical specifications of the climate chamber: Temperature range: -40...+120 °C Temperature tolerance: +/- 0.5°C Temperature change rate: 1 K/min Humidity range: 15...approx. 95 % RH Humidity tolerance: +/- 5.0 % RH Dimensions: Test space volume: 50 m³ External dimensions (W x D x H): approx. 4800 mm x 6100 mm x 2640 mm Test chamber (W x D x H): approx. 4500 mm x 5000 mm x 2200 mm Door opening (W x H): approx. 3000 mm x 2200 mm Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: ready for operation (used), Year of construction: 1988, A textile cutting and winding system consisting of several individual machines is available. The machine sews tubular bales together, cuts and rolls them into large rolls (bobbins). Working width for elastic/non-elastic fabrics: 1860mm/2400mm, shear width: 980mm, production capacity: 200kg/h, tubular bale weight: approx. 30kg, large roll weight range: 300kg-500kg, roll width: 1780mm, roll width: 2700mm, current fabric web width: 1700mm, total system dimensions X/Y/Z: approx. 5200mm/4000mm/5200mm, total system weight: approx. 3000kg. On-site inspection is possible. Lodpfju Afzwox Alcehk

Condition: ready for operation (used), Weiss 175487A motor grinding spindle SN 175487A-0036 with Indramat connector, used, normal signs of wear, 100% functional, delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Ljdpfxjx Dwiuo Alcshk

Condition: used, Year of construction: 2012, Motor: 0.75 kW Technical data: see illustration. Lhsdpfx Ajxcty Tjlcsk

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, Lhodpfxoyi Ezkj Alcsk - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: used, Year of construction: 2012, Motor: 0.75 kW Technical data: see illustration. Ledpfxexctw Ss Alcjhk

Condition: good (used), Year of construction: 2012, Motor: 1.1 kW Lodpfsxbgg Rjx Alcshk For technical data, see illustration.

Condition: good (used), Year of construction: 2012, Motor: 1.1 kW Ljdpfjxbgfmex Alcjhk For technical data, see illustration.

Condition: good (used), Year of construction: 2012, Motor: 1.1 kW For technical data, see illustration. Lhodpoxbgfgefx Alcek

Condition: used, Weiss clamping carriage fully hydraulic Lhodpoq U N A Sjfx Alcek with auxiliary trolley Track width: 90 cm Has already been dismantled and is ready for loading at any time. Location: Austria, near Kufstein

Condition: used, Remote controlled tensioning wagon fully hydraulic. Track gauge 900 mm. Carriage height 400 mm. With auxiliary trolley. Cabin. Electric control cabinet. Model / Prism Chains driven. 4 years before decommissioning many new parts installed. Lhjdpfx Aemhgc Aolcsk Hydraulics, feed, collet etc.

Condition: used, WEISS MAIN SPINDLE 1P JBD:168347 The article is used, comes from an industrial machine dismantling and was in operation until it was reassembled. Please note that this is a sample image, which may have different signs of use and/or software stocks. Brand names, trademarks and registered trademarks are the property of their legal owners and are used here for description purposes only. You can find more information on our homepage Ljdpjvr E Dgjfx Alcjhk *

Condition: refurbished (used), power: 19 kW (25.83 HP), rotational speed (min.): 1,100 rpm, rotational speed (max.): 15,000 rpm, Manufacturer: Weiss Spindeltechnologie GmbH Manufacturer group: Siemens Company Type: Motor spindle Spindle type: 175047 A Tool interface: HSK-A63 Motor designation: MW20/26-4 DBL 191299 Power P: 19 kW Rated speed: 1100 min⁻¹ Maximum speed: 15000 min⁻¹ Speed ranges: 1260 / 1710 / 4200 / 15000 min⁻¹ Frequency: 42 / 57 / 140 / 500 Hz Voltage: 137 / 175 / 400 / 400 V Current: 116 / 86 / 48 / 36 A Standard: EN 60034 Diameter D1: 179.7 mm Diameter D2: 262 mm Diameter LB: 285 mm Lsdpfjyrz N Ajx Alcjhk Overall length L: 1026 mm Spare part number: 90210001388 Item number: 211167

Condition: used, Weiss tensioning car fully hydraulic with auxiliary car Lhedsip Ty Tepfx Alcjk with rails track gauge 90 cm immediately available location: Austria, near Vienna

Year of construction: 1997, condition: excellent (used), Safety workbench Manufacturer: WIBO Weiss Type: Jekt TCRJO 180/98 with stepped design made of stainless steel Work area: Depth: 920 mm Height: 1200 mm Width: 1800 mm Working height: 600 mm Overall dimensions: Depth: 1080 mm Height: 2100 mm Height with dust extraction: 2550 mm Lodpfx Alohk St Aecohk Width: 1800 mm

Condition: used, Rotary transfer table, rotary indexing table with 16 stations Rotary transfer machine + hydraulic press TOX Rotary transfer machine, special-purpose machine with several assembly stations Manufacturing and assembly system using a rotary transfer process From the special-purpose machine manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS, type TC500, with 16 stations - pressing station with TOX power unit - vibratory conveyor - conveyor belts - inspection stations Lhedjgd D U Eepfx Alcek - some stations are still visible in the pictures but have already been dismantled Space requirement L x W x H approx. 3500 x 2750 x 2300 mm Weight approx. 3000 kg All in like-new condition - The system has never been used in series production.

Condition: ready for operation (used), Positioning table, welding rotator, rotary work table, Used machine Manufacturer: Weiss GMBH Type: TC 700 T Overall dimensions: Width: 870 mm Depth: 900 mm Height: 820 mm Weight: 871 kg Electrical specifications: 400V; 6.8A; 3.4 kW Lodpfew Havfjx Alcehk Table diameter: 700 mm

Condition: new, Type: CR0900S-88 Serial number: CR416156 Gear ratio: 312:1 Speed: 9.6/min Torque: 13000 mm Lhjdpfxsv Tbx Ao Alcjk Year of production: 2022 Weight: 806 kg Country of production: Germany

Condition: not inspected (used), diameter / mm Lhodpfx Aljxn Aqfjcjk Cutting (quantity) / weight / kg Spindeltyp: 195.6/S/48-7.7/20-1D/60HSK-A63 Ident-No.: 195.6/x000917B2 Milling spindle is sold as untested !

Condition: good (used), Remotely controlled, hydraulically operated quick-release carriage with hydraulic auxiliary carriage. Gauge: 840 mm. Control panel and electrical switchgear cabinet. Lhodod Nqrqjpfx Alcek

Year of construction: 1978, condition: used, machine/vehicle number: 5181, temperature: + 10 to + 80°C usable space: width 1200 mm depth 1600 mm height 1750 mm electrical connection: 220 V Lhedpfx Ale Dq Adocek space needed: 1550 x 1900 x 2200 mm high weight: 500 kg

Condition: used, Electric motor, three-phase motor, brake motor Lhsdpem Dyicsfx Alcsk -Manufacturer: Weiss, electric motor with brake -Type: 5.5AZK 90L-8T B14P140 -Power: 0.55kW -Speed: 675 rpm -Brake: 20 Nm -Shaft: Ø 24 x 50 mm -Construction: B3 -Protection class: IP 55 -Number: 2x motor available -Price per piece -Dimensions: 385/175/H230 mm -Weight: 19.4 kg/pc.