Used Weiss Wm250V for sale (136)

Condition: used, Weiss   Type: WK-600/70 (I)-(II) 2 G EEx /22605147   Weiss Climate Chamber, Water-Cooled   (Test chamber, explosion-proof) INERTING WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER   Technical Data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx   External dimensions with hinges and door closure Height 1995 mm, Width 1090 mm, Depth 1660 mm   External dimensions without hinges and door closure Height 1995 mm, Width 1000 mm, Depth 1660 mm   Test chamber volume: approx. 600 liters   Cold / Heat operation -70 to 180°C   Climate operation 10 – 95°C Humidity 10...98 % RH Temperature change per unit of time Cooling approx. 2.5 K/min Heating approx. 4 K/min   3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Fuse, customer-supplied: 32 A slow-blow Permissible test item weight Total load of the grid supports 80 kg   Test chamber floor 80 kg, insert grid 40 kg   Weight: 800 kg   Refrigerant: R 404A/R 23   (Evaporator of the air conditioning system has been replaced)   For your safety as a buyer, here is the following information!   The following points are carried out on our offered chambers in advance: Dksdozh D Ryepfx Apiew 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data and information are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: used, Weiss SC 1000/+20IU Corrosion Climate Change Test Chamber Weiss SC 1000/+20 JU Corrosion Climate Change Test Chamber The test system is a combination of a climate test cabinet with variable temperature and humidity and a corrosion test cabinet with a salt spray test. In a time-lapse sequence, susceptible metallic components are tested for corrosion according to the relevant standards. Temperature operating range: Temperature: +20 °C ... +60 °C Temporal temperature deviation: +0.5K Climate operating range: Temperature: +20 °C ... +60 °C Temporal temperature deviation: +0.5K Relative humidity: 10...98 % RH Temporal humidity deviation: 3...5% RH Dew point: +12 °C ... +59 °C Salt spray test SS (temperature range ambient temperature +5 K ... +50 °C) according to DIN 50 021 (salt spray via 2-nozzle diffuser, 1.5 x 0.5 m, 80 cm height) Control: Digital measurement and control system SIMCON/32*-Net with touch panel Interfaces: serial interface RS 232 C, parallel printer interface Operating modes adjustable via process controller: - Temperature operation - Climate operation - Salt spray test - Direct spraying with salt solution - Condensation load - Flushing of test chamber walls - Drying/ventilation of test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: psychrometric fresh measuring device TFT (with forced humidification) Technical data SC 1000/+20 JU Usable space dimensions: Height up to roof slope approx. 1000 mm + Roof approx. 350 mm Width approx. 1100 mm Width between heating elements approx. 1000 mm Depth approx. 1000 mm Test chamber door made of glass, left-hinged Height approx. 1350 mm Width approx. 1000 mm External dimensions including unit components and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch panel approx. 1700 mm Depth approx. 2600 mm Floor load max. 100 kg Djdpfx Aoph U Dhspiekw Brine storage tank approx. 200 l, with level monitoring, located separately beside/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Connection power: 13 kW Weight: 1300 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Weiss   Type: WT1-340/30   Converted to R452a   Weiss temperature chamber, air-cooled   Temperature range: from -30°C to 180°C   Temperature change rate, cooling: 1.6 K/min Temperature change rate, heating: 2.1 K/min   Test chamber dimensions: Width 550 mm x Depth 750 mm x Height 800 mm Housing dimensions: Width 800 mm x Depth 1500 mm x Height 1800 mm   Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 4.9 kW, Rated current: 9 A   Refrigerant: R452a   Weight: 515 kg   Dkedpszd Rw Sofx Apiew For your safety as a buyer, please note the following information:   The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2008, Here are some key details: - CNC universal cylindrical grinding machine WUG 21 base machine by CNC-Technik Weiss. (The WUG 21 features a Karstens machine bed on which the CNC system is mounted.) - Year of manufacture: 2008 / operated in single-shift use only - 1000 mm between centers - Workpiece spindle headstock and tailstock MK4 - Wheel diameter up to 500 mm - Wheel mounting at a 26.5° angle - Grinding wheel drive with programmable SUG - Grinding spindle headstock manually swivellable on air cushion - Wheel positioned on the right - Internal grinding attachment mounted at the rear, including dressing device - Eckelmann control system - DIN programming - Cycle programs - Manual grinding: yes Dkedpfexmurxox Apijw - Automatic dressing - Marposs acoustic emission monitoring for external grinding wheel, including software package - Grinding wheel spindle and workpiece spindle driven by V-belt drive

Condition: used, Weiss Climate chamber / Temperature and humidity chamber Weiss WK3-340/70 Climate chamber Temperature range from -70 °C to +180 °C with humidity control Approx. 335 liters / 10 to 98 % RH / air-cooled For sale is a used climate chamber from the manufacturer Weiss Umwelttechnik GmbH. The climate chamber is suitable for temperature and humidity testing, environmental simulation, material testing, quality assurance, electronics and component testing as well as development, aging and stress tests. The unit features a programmable touch panel control, temperature and humidity control, a large observation window and lateral test specimen ports. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: WK3-340/70 Device type: Climate chamber / Temperature and humidity chamber Test chamber volume: approx. 335 liters Temperature range: -70 °C to +180 °C Temperature change rate cooling: approx. 3 K/min Temperature change rate heating: approx. 3 K/min Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±1.5 K Climate range temperature: +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Temperature deviation over time in climate operation: ±0.1 to ±0.3 K Temperature homogeneity spatially in climate operation: ±0.5 to ±1 K Humidity deviation over time: ±1 to ±3 % RH Refrigerant 1: R404A Refrigerant quantity: 2.5 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 0.55 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Standby pressure: 13 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 5.5 kW Rated current: 16 A Dimensions and weight: Test chamber volume: approx. 335 liters Internal dimensions (H × W × D): approx. 750 × 580 × 765 mm External dimensions (H × W × D): approx. 1,775 × 870 × 1,600 mm Weight: approx. 585 kg Equipment: Programmable touch panel control Temperature control Humidity control Air-cooled design Stainless steel interior Large observation window Test chamber lighting Lateral test specimen ports Adjustable feet Program and manual operation Test specimen port right: DN 125 mm Test specimen port left: DN 50 mm Stainless steel inserts as shown in the pictures Areas of application: Dodpoz A A T Hofx Apiekw Temperature testing Climate testing Humidity testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Quality assurance Research and development Lifetime testing Aging and stress tests Condition: Used Optical condition as shown in the pictures Scope of delivery: 1x Weiss WK3-340/70 Climate chamber Touch panel control Stainless steel inserts as shown in the pictures Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered test and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / corrosion testing cabinet Weiss SC/KWT 450 salt spray chamber Testing system for salt spray, corrosion and coating tests For sale is a used salt spray chamber from Weiss Umwelttechnik GmbH. The system is suitable for corrosion tests, coating tests, material tests, quality assurance, as well as industrial testing and development applications. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Device type: Salt spray chamber / corrosion testing cabinet Size: 450 l Test chamber volume: approx. 360 l Brine reservoir: approx. 180 l Test chamber dimensions: approx. 850 × 570 × 740 mm (W × D × H) External dimensions: approx. 1,930 × 800 × 920 mm (W × D × H) Dedpfx Apezzzpgoijkw Weight (empty): approx. 140 kg Max. test part weight: 100 kg Max. load per rod: 8 kg Brine consumption: approx. 0.5–1 l/h Compressed air consumption: approx. 1.5 Nm³/h Demineralized water consumption: approx. 0.4 l/h Mains connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Permissible operating overpressure: 6 bar Equipment: Programmable control unit Test chamber with sample holders Brine supply system Compressed air treatment Connection for demineralized water Exhaust connection Brine drain Documentation / operating documents available Accessories according to the pictures Areas of application: Corrosion testing Salt spray testing Coating testing Material testing Quality assurance Automotive industry Research and development Scope of delivery: 1x Weiss SC/KWT 450 salt spray chamber Sample holders according to the pictures Original operating/service documents Accessories according to the pictures Condition: Used Optical condition according to the pictures Normal signs of wear and tear due to age and use The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötschtechnik Climate chamber / Temperature chamber Vötschtechnik ClimeEvent C/480/70/15 Temperature and climate chamber, water-cooled Approx. 480 liters / -72 °C to +180 °C / 10 to 98 % RH For sale is a used climate chamber from Vötschtechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development, aging, and stress tests. The integrated touchscreen control allows temperature and humidity profiles Dsdpfe Af Ig Asx Apijkw and automatic test programs to be created and executed. Existing test programs include tests according to IEC 60068, among others. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/480/70/15 Device type: Climate chamber / Temperature chamber Test chamber volume: approx. 480 liters Country of manufacture: Germany Temperature range: -72 °C to +180 °C Temperature change rate heating: approx. 17 K/min Temperature change rate cooling: approx. 21 K/min Max. heat compensation at +20 °C: approx. 8,000 W Temperature homogeneity spatially: ±0.5 to ±2 K Temperature gradient up to +180 °C: ≤2 K Climate range temperature: +10 °C to +95 °C Dew point range: +4 °C to +94 °C -3 °C to +4 °C discontinuous Humidity range: 10 to 98 % RH Humidity deviation over time: approx. ±1 to ±3 % RH Temperature deviation over time in climate operation: ±0.1 to ±0.3 K Temperature homogeneity spatially in climate operation: ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 4.00 kg / 2.30 kg GWP: 1,397 / 14,800 CO₂ equivalent: 5.59 t / 34.04 t Max. operating pressure ND/HD: 19 / 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 24 kW Rated current: 43 A Cooling Water-cooled design Cooling water supply and cooling water return available Connection for demineralized water Overflow and condensate drain Dimensions and weight Test chamber volume: approx. 480 liters External dimensions according to installation plan (W × D × H): approx. 2,807 × 1,000 × 2,020 mm Transport dimensions with overhangs (L × W): approx. 2,857 × 1,115 mm Weight according to series documentation: approx. 1,350 kg Equipment Touchscreen control / WEBPanel Program and manual test operation Temperature and humidity control Stainless steel interior Large viewing window Test chamber lighting Several shelves / insertion levels Water-cooled design Side test chamber openings Safety temperature limiter RS232 interface RS485 / RS422 interfaces USB interface Status, alarm and maintenance display Operating hour counter Program management and reporting function Areas of application Temperature testing Climate testing Environmental simulation Humidity testing Material testing Electronics testing Component testing Quality assurance Research and development Aging and stress tests Condition Used Workshop inspected Optical condition according to pictures Scope of supply 1x Vötschtechnik ClimeEvent C/480/70/15 climate chamber Shelves according to pictures Existing documentation / operating manual Accessories according to pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or forwarding possible. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2016, We offer here a used rotary indexing table of the brand Weiss. Dkjdpfx Apjni Awpeijw The turntable has a load capacity of approx. 30 tons and a diameter of approx. 3.5m as well as a dead weight with motor of approx. 6500Kg. The control of the turntable is also available, with SEW frequency converter, braking resistor etc.. All documentation is available.

Condition: used, Weiss   Type: SWT 200/400-S   Weiss spray and splash water test cabinet   This cabinet is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum.   Features Glass door with wiper Pneumatic drive for the swivel nozzle Adjustable swivel angle Replaceable swivel nozzles Nozzle holder is swiveling and replaceable Adjustable water flow rate and measurement   Control of the test duration   Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen holder (total) 25 kg Spray radius 200 mm / 400 mm   Data for IP protection tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10°   Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm   Data for operation Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A   Weight: 375 kg   Important note: "The table shown in the photos is not included in the sale."   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone. Dsdpfxezii Akj Apiokw

Condition: used, Weiss Type: SWT 200/400-S Weiss spray and splash water testing cabinet The cabinet is used to test the ingress of water into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system reduces water consumption to a minimum. Features: Glass door with wiper Pneumatic drive of the swivel nozzle Adjustable swivel angle Interchangeable swivel nozzles Nozzle holder can be swivelled and replaced Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress: Max. load with test specimen (evenly distributed over the area) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests: Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data: Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 KW Rated current 5.0 A Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) Dsdpfxozil T Eo Apiskw (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Umwelttechnik GmbH Type: WK11-600/70 WEISS climate chamber / temperature chamber ATEX II 2 G Ex IIB T4 – explosion-proof test chamber Air-cooled – approx. 600 liters For sale is a used WEISS climate chamber, type WK11-600/70, with an explosion-proof test chamber. The system is suitable for temperature and humidity tests as well as for the conditioning of samples and materials. Simcon/32 control system with digital operating panel Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: WK11-600/70 Djdpfx Apo Ad Ibfjijkw Test chamber volume: approx. 600 liters Cooling: air-cooled Temperature range: -70 °C to +100 °C Humidity function: available Explosion protection: Marking according to the nameplate: II 2 G Ex IIB T4 Equipment group II, category 2 G Explosion group IIB Temperature class T4 CE marking available Dimensions and weight (approx.): External dimensions (H x W x D): 1655 x 1085 x 1980 mm Test chamber dimensions (H x W x D): 950 x 800 x 800 mm Weight: approx. 675 kg Electrical connection data: 3/N/PE AC 400 V ±10 %, 50 Hz Rated power: 11 kW Rated current: 22 A Refrigeration data: Refrigerant: R404A / R23 R404A: 3.5 kg R23: 0.6 kg Max. low pressure: 18 bar(g) Max. high pressure: 25 bar(g) Equipment: Digital operating panel Temperature and humidity control RS232 interface Test chamber lighting 230 V socket Connections for demineralized water Air-cooled refrigeration system Condition: Used Visual condition as shown in the pictures Scope of supply: as shown in the pictures Condition: used (Subject to changes and errors in the technical data and information!) We will gladly answer any further questions you may have by phone.

Condition: used, Weiss Type: WT3-480/60 Weiss Temperature Test Chamber WT3-480/60 EX / ATEX – explosion-proof test chamber Water-cooled version With digital control and touch panel Temperature range: -60 °C to +160 °C For sale is a used temperature test chamber from the manufacturer Weiss Umwelttechnik GmbH. The system has an explosion-proof test chamber and is suitable for industrial temperature tests within the permissible operating conditions. ATEX explosion protection: Marking according to the nameplate: II 2/- G IIB T3 Gb/- Test chamber explosion-proof CE 0044 The permissible operating conditions are determined by the manufacturer's documentation. Control panel "Touch Panel" Control and operating functions as well as temperature programs can be called up and set via the touch panel. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: WT3-480/60 Device type: Temperature test chamber Version: EX / ATEX – Test chamber explosion-proof Cooling: water-cooled Humidity control: not available Test chamber volume: approx. 480 liters External dimensions without door fittings: Height: approx. 2050 mm Width: approx. 1000 mm Depth: approx. 2480 mm External dimensions with hinges and door handle: Height: approx. 2050 mm Width: approx. 1100 mm Depth: approx. 2480 mm Overall depth including touch panel: approx. 2600 mm Internal dimensions: Height: approx. 920 mm Width: approx. 800 mm Depth: approx. 650 mm Note on dimensions: The specified dimensions are reference values for the explosion-proof WEISS 480-liter series. Deviations are possible in this special version. Data for temperature tests: Temperature range: -60 °C to +160 °C Temperature change rate: Heating: approx. 4.04 K/min Cooling: approx. 1.42 K/min Measured values according to the workshop report. Data for operation: Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17.0 kW Rated current: 30.0 A Refrigerant: R404A – 3.5 kg R23 – 1.2 kg Refrigeration system: Max. low pressure: 18 bar g Max. high pressure: 25 bar g Dkjdpfx Apo Ad Iy Ijiew Standing pressure: 8.5 bar g Equipment: Digital control with touch panel Test chamber lighting Network interface according to workshop report Water-cooled refrigeration system Explosion-proof test chamber Weight: approx. 930 kg Reference value of the explosion-proof WEISS 480-liter series For your safety as a buyer, the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. A workshop report is available for this device. Temperature functions and other test points have been documented. According to the workshop report, the cooling function has been repaired. The buffer battery has been replaced. Work has been carried out on the display cabling. Details according to the workshop report. Condition: used Scope of delivery: (See picture) Shipping by forwarding agent possible upon request. (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Weiss Type: SWT 200/400 Weiss Spray and Splash Water Test Chamber The chamber is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Features Glass door with wiper Pneumatic drive for the pivoting nozzle Adjustable pivoting angle Replaceable pivoting nozzles Nozzle holder is pivotable and replaceable Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests Pivoting speed approx. 60°/s Dsdpfjzh D Rmox Apiekw Pivoting angle IPX3 approx. ± 60° Pivoting angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Weight: 375 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Weiss Type: SWT 600/800-S Spray Water Test Unit for IP protection tests IPX1 / IPX2 / IPX3 / IPX4 / IPX4K / IPX9K Dkedpfx Aszachcspiow For sale is a professional spray water test unit from Weiss Umwelttechnik GmbH. The unit is used to perform standardized water, spray water, and ingress protection tests on components, housings, electronic components, vehicle parts, and technical products. Suitable for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch panel. Test sequences can be automated. The unit features a stainless steel test chamber, rotating test table, swivel arm, water circulation, and available test accessories. Technical data according to the nameplate / documentation: Electrical data: Voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram No.: 82962 CE marking available Water connection according to documentation: Water inlet: R 3/4" Water outlet: R 1 1/4" Water pressure supply line: approx. 2 – 6 bar Water pressure IPX9K: adjustable approx. 80 – 100 bar Turntable speed: approx. 1 to 5 RPM Swivel speed: approx. 60 °/s Permissible ambient temperature according to documentation: approx. 10 °C to 35 °C Dimensions and weight: Test chamber SWT 600/800: approx. 2350 x 2400 x 2650 mm with hinges and door lock Test chamber without hinges and door lock: approx. 2350 x 2400 x 1850 mm Weight of the test chamber: approx. 650 kg High-pressure unit: approx. 850 x 1200 x 800 mm Weight of the high-pressure unit: approx. 380 kg Total weight according to available data: approx. 1030 kg Noise level according to documentation: approx. 88 dB(A) Heat dissipation to the environment: average approx. 1 kW maximum approx. 3.5 kW Equipment: Touch panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earthing point CE marking Robust industrial design Available documentation: Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories include, among others, as shown in the pictures: Various spray and test components Nozzle ring / spray ring Swivel arm accessories Flow meter Connection components Tools / keys Test accessories Documentation and documents Inspection and testing on site is possible and desired after prior appointment. Scope of delivery: Weiss Umwelttechnik SWT 600/800-S Spray Water Test Unit High-pressure unit Turntable / swivel arm Test and spray accessories as shown in the pictures Operating manual / documentation Accessories and components as shown in the pictures Condition: Used Optical condition see pictures Scope of delivery as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale We will be happy to answer any further questions by telephone.

Condition: like new (used), Year of construction: 2021, WEISS Ltd. used / tested CR heavy duty table with servo amplifier B&R 8V1180.00-2 EXTREME LOADABLE, FOR HORIZONTAL AND VERTICAL 585Kg axial runout : 0,02 mm Radial runout : 0,02 mm Center opening : 346 mm max. dynamic axial force : 70000 N B&R: 8V1180.00-2 Modular mechanical design by plug-in modules Dkjdpfx Aspa Nz Dspisw Integrated mains filter Integrated or optional external braking resistor All connections in pluggable design Integrated electronic restart interlock ACOPOS servo drive, 3x 400-480 V, 19 A, 9 kW, line filter, braking resistor, DC link power supply and electronic safe restart interlock integrated

Condition: used, WEISS TECHNIK Climate testing chamber / Temperature testing chamber / Climate chamber Weiss Umwelttechnik WK-180/70/5 Temperature range -70 °C to +180 °C Test chamber volume approx. 190 liters Water-cooled – Temperature and humidity testing system For sale is a used climate testing chamber from the manufacturer Weiss Umwelttechnik GmbH, model WK-180/70/5. The climate testing chamber was developed for carrying out temperature and climate tests. It is suitable for the testing of materials, components and electronic parts under different temperature and humidity conditions. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Model: WK-180/70/5 Type of equipment: Climate testing chamber / Temperature testing chamber Design: water-cooled Test chamber volume: approx. 190 liters Country of manufacture: Germany Temperature data: Temperature range: -70 °C to +180 °C Temperature change rate according to the manufacturer: Heating: approx. 7.5 K/min Cooling: approx. 7.5 K/min Dkodpo Abbidefx Apiow Climate data according to the manufacturer for the WK series: Climate temperature range: +10 °C to +95 °C Relative humidity: 10 % to 95 % r.h. Humidity control for climate tests The specifications for the temperature change rates and the climate range are the manufacturer's stated values. The actual performance depends on the operating and test conditions. Refrigerant circuit: Refrigerant 1: R404A Fill quantity: 2.50 kg Max. low pressure: 19 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Fill quantity: 0.75 kg Max. low pressure: 19 bar g Max. high pressure: 25 bar g Standby pressure: 13 bar g Refrigerant and fill quantities according to the nameplate. An up-to-date leak test certificate is not included in the available documentation. Electrical data: Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 21 A Test chamber: Test chamber volume: approx. 190 liters Internal dimensions (W × D × H): approx. 580 × 450 × 750 mm Test chamber with viewing window Metallic shelves / grid trays Test specimen feed-throughs Dimensions / Transport: External dimensions (W × D × H): approx. 870 × 1,285 × 1,775 mm Weight: approx. 460 kg Dimensions according to the manufacturer's drawing. Weight according to the manufacturer's specifications without options. Actual dimensions and weight may vary depending on the equipment. Equipment: Climate testing chamber with temperature and humidity control Water-cooled cooling system Electronic temperature control S!MCON / 32 control unit of the series External control panel Viewing window Test chamber lighting Metallic shelves Lateral test specimen feed-through Multi-stage refrigeration system Electrical power connection Industrial housing with adjustable feet Equipment according to the pictures Application areas: Temperature tests Climate tests Environmental simulation Material testing Electronics and component testing Aging and stress tests Quality assurance Research and development Product and component testing Workshop inspection from 15.10.2026: Measured temperature change Heating: approx. 9.7 K/min Measured temperature change Cooling: approx. 12.1 K/min Condition & Notes: Used Optical condition according to the pictures Scope of supply: 1 × Weiss Technik WK-180/70/5 climate testing chamber External control panel Existing shelves Existing connection components Otherwise, scope of supply as shown in the pictures. Collection or shipping by forwarding agent possible by arrangement. Loa

Condition: good (used), Year of construction: 1994, Heating system for hot water or steam Heating capacity: 6 MW Djdpfxeyizqnj Apiokw Fuel: wood chips With oil burner as backup heating Dismantling must be carried out by the buyer

Condition: used, Weiss Type: TS 130 Temperature shock test chamber, water-cooled Specification: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber changeover: 10 sec. Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lift platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Dsdezp D Dijpfx Apijkw Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz /14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Weiss Type: TS 130 Dkjdpfjzp D A Eex Apisw Weiss Temperature Shock Testing Chamber, Air-Cooled Specifications: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber changeover time: 10 seconds Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lift basket (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on test chamber floor: max. 20 kg Cooling water pressure: min. 2 … max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) Refrigeration cascade: water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: TS 130 Temperature shock test chamber, water-cooled Specification: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Dksdpfx Aezp D Alspiow Hot/cold chamber changeover: 10 sec. Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lift platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz /14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Weiss   Weiss ShockEvent D/210/a/V1   Type of equipment: Temperature-controlled shock testing chamber   Testing principle: Stationary test chamber with supply of warm, cold, and ambient air via flaps   Test chamber volume: approx. 210 liters   Usable test chamber width / height according to installation plan: 700 / 500 mm   Installation dimensions according to installation plan (W × D × H): approx. 1,480 × 1,670 × 1,967 mm, plus space for attachments   Weight: approx. 1,350 kg   Temperature range, warm chamber: +50 to +225 °C Temperature range, test chamber, warm phase: +50 to +200 °C Temperature range, test chamber, cold phase: −65 to 0 °C Temperature range, cold chamber: −70 to 0 °C   Heating rate: 18 K/min, i.e. 18 °C Cooling rate: 2 K/min, i.e. 2 °C   Temperature deviation over time: ±0.3 to ±0.5 K in steady state Temperature homogeneity spatially: ±0.5 to ±1.5 K   Heat compensation, cold phase: max. 6,000 W at −20 °C Heat compensation, warm phase: 0 W   Maximum load, test chamber floor: 100 kg, evenly distributed   Maximum number of insert baskets: 7 pieces Maximum load per insert basket: 7.5 kg Maximum total load of insert baskets: 50 kg Distance between insert baskets: 50 mm   Operation: WEBPanel touch display with WEBSeason®   Remote control: via computer, smartphone, or tablet   Interfaces: Ethernet, USB, and digital I/O   Power connection: 3/N/PE AC 400 V ±10 %, 50 Hz; actual design according to nameplate   Other connection options according to instructions: 380 V / 50 Hz or optionally 440 V / 60 Hz Rated power: 31.9 kW Rated current: 57 A On-site protection: 63 A slow-blow fuse Protection class, control cabinet and operating unit: IP23   Cooling: water-cooled Cooling water connections: Supply and return, each 1" internal thread   Cooling water temperature: +12 to +28 °C Cooling water pressure: 2.5 to 6 bar Differential pressure, cooling water circuit: over 2 bar   Cooling water consumption under full load with 18 °C inlet and 10 K heating: 2.9 m³/h Cooling water consumption under full load with 28 °C inlet and 5 K heating: 5.8 m³/h   Maximum heat dissipation to the cooling water: 33.7 kW Maximum heat dissipation to the installation room: 1 kW   Compressed air supply: 4 to 10 bar overpressure Compressed air connection: quick-release coupling DN 7.2 Compressed air temperature: +2 to +50 °C   Condensate drain: hose connection Ø 8 mm   Sound pressure level: approx. 63 dB(A)   Permissible ambient temperature during operation: +10 to +35 °C   Permissible relative humidity at the installation location: max. 75 % Djdpfxjz Rwk Ro Apijkw   Refrigerant: R449A 3.5 kg R469A 2.5 kg   Shipping or freight transport possible. Subject to changes, errors, and prior sale.   We will be happy to answer any further questions by telephone.

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Dodpfx Apjytr Sweiskw Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: used, Weiss Type: TS 130 Weiss Temperature Shock Test Chamber, Water-Cooled Specification: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber changeover: 10 s Temperature stability: ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on test chamber floor: max. 20 kg Cooling water pressure: min. 2 … max. 6 bar Dsdpfx Aszp D A Sjpiokw Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz /18.7 kW Nominal current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WT11-1000/40   Weiss temperature chamber, air-cooled, with Weiss condenser cooler   Test chamber volume approx. 990 liters   Data for temperature tests:   Temperature range -40°C to +180°C   Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K   Temperature change rate (according to IEC 60068-3-5) Heating 4 K/min Cooling 3 K/min   Heat compensation max. 4500 W   Feedthroughs installed as standard R1: NW 125 mm L1: NW 50 m   Dimensions:   Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm   Maximum load (evenly distributed over the area) of the test chamber floor 150 kg Per insert shelf 50 kg Total load of the shelf supports 100 kg   Data for operation:   Test chamber lighting: Halogen bulb 24V, 50W   Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 11.5 kW Rated current 22 A Heat dissipation water-cooled test cabinets max. heat dissipation to the environment 1.3 kW   Noise measurement: Sound pressure level approx. 64 dB(A)   Refrigerant: (converted to R-452a)   Weight: approx. 840 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Dksdpfxozfzame Apiew Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WT3-600/40   Weiss temperature test chamber with S!MCON / 32 control, air-cooled   (Refrigerant converted to R-452A)   Control panel: "Touchpanel" All control and operating commands can be initiated on the "Touchpanel" control panel by simply touching the function symbols.   Adjustable feet To compensate for uneven floors and to ensure adequate ventilation of the machine, the test chamber is equipped with adjustable feet.   Feedthroughs Dksdpfjzga Huex Apisw The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be placed inside the test chamber.   Feedthrough installed as standard R1: 125 mm nominal diameter L1: 50 mm nominal diameter   Test chamber volume: approx. 600 liters   External dimensions with hinges and door latch Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door latch Height 1995 mm, Width 1000 mm, Depth 1660 mm   Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm   Data for temperature tests:   Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K   Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 2500 W   Data for operation:   Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power 7.8 kW Fuse on customer side: 16 A, slow-blow   Sound pressure level approx. Measured at a distance of 1 m from the front, 1 m height: 61 dB(A)   Refrigerant: R-452A   Weight: 620 kg   For your safety as a buyer, here is the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and information are subject to change!)   We are happy to answer any further questions you may have by telephone.