Used Akerman H5 M for sale (70,041)

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve Fjdpfx Aob A S Haef Defu -Solenoid valve -PN 3-10 bar Price: per piece -Number: 7 available -Weight: 0.8 kg

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, directional control valve -Solenoid valve -PN: 1.6-10 bar -Weight: 0.3 kg Fsdpjb A S Upjfx Af Djfu

Condition: used, Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 1000 x 600 mm Fedpfxsb Uhkwe Af Dofu -Depth: 500 mm -Edge: 14 mm -Price: per piece -Number: 1x available -Dimensions: 1030/630/H500 mm -Weight: 26 kg

Condition: used, 5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, reversing directional valve -Manufacturer: Festo, solenoid valve -Type: 10410 JMFH-5-1 / 4 Ffjdpfxegwmg De Af Dou -Working pressure: 1.5 - 8 bar -Number: 7x valves available -Price per piece -Dimensions: 235/75 / H30 mm -Weight: 0.4kg / piece

Condition: used, Clamping angle, clamping aid Fodpfeffm Ebsx Af Dsfu -Clamping angle: for clamping aid workpiece clamping -Dimensions: 600/380/H500 mm -Wall thickness: 25 mm -Bores below: Ø 11, on the side: Ø 13/180 mm -Weight: 107 kg

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Type: JMVH-5-1/4-B -Solenoid valve -PN: 2-10 bar -Price: per piece -Quantity: 2 available -Weight: 0.7 kg Fsdpfx Afob A H Ewo Defu

Condition: used, Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Manufacturer: Kraft, heavy-duty transport truck industrial trailer with turntable steering -Platform: 2000/1000/H520 mm Ffodel Tuvtspfx Af Deu -Load capacity: 3000 kg -Tires: solid rubber -Total dimensions: 3410/1000/H520 mm -Weight: 200kg

Condition: used, Filter control valve, on-off valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, service unit combination, filter control valve Fedpjkahkvofx Af Defu -Maintenance unit: with stable bracket -Outputs: 2x individually lockable -Pressure: Max. 10 bar / 150 PSI -Dimension: 390/325/H520 mm -Weight: 16 kg

Condition: used, Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, double turntable steering, heavy-duty trailers -Handover: in the current condition as viewed -Note: Check the condition of the wheels -Heavy-duty transport vehicle: Industrial trailer with 1-axle turntable steering -Platform: 6980/1180/H500 mm -Load capacity: 9 t -Tires: Front 400/75-305 / Rear 525/120-370 solid rubber twin tires -Dimensions total: 8370/1300/H660 mm Fodpfxsw Dztgs Af Dofu -Weight: 960 kg

Condition: good (used), Clamping plate, welding table, welding table, straightening plate, measuring plate, measuring table Ffsdpfx Asb Ix Naef Deu -Width: 505 mm -Length: 510 mm -Height: 50 mm -Plate: Massive -Sheet thickness: 50 mm -Weight: 96 kg

Condition: used, Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder Ffjdpfxocti Akj Af Deu -Intermediate plate: for hydraulic press, eccentric press, injection molding machine -with: groove for centering -Width: 380 mm -Length: 1520 mm -Height: 55 mm -from: 2 sides milled -Groove: 21 x 15 mm -Weight: 250 kg

Condition: used, Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 160 mm -Hole spacing: 100 mm -Price: per piece -Number: 6 pieces -Dimensions: 160/20/H50 mm -Weight: 1.1 kg/piece Ffsdpfxefgwv Ro Af Dou

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure boosting cylinders Ffodpfx Afegw Tvao Dju -Manufacturer: Fischer, pressure booster cylinder from Fischer DHS 12 / 3000 guillotine shears -Shaft: Ø 65 mm -Dimensions: 1125/340 / H580 mm -Weight: 326 kg

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Magnetic valve -Series: W402 -Weight: 0.9 kg Ffodpfeb A S Hpox Af Deu

Condition: used, Absolute encoder -Hollow shaft: Ø 12 mm -Dimensions: 80/85/H60 mm Fedpedntfvsfx Af Dofu -Weight: 0.5 kg

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Manufacturer: Festo -Type: MFH-5/2-D-2-FR C -Magnetic valve -PN: 3-10 bar -Number: 1x valve available -Price: per piece -Weight: 0.62 kg Ffedpoct H Tmsfx Af Deu

Condition: used, Clamping angle for workpiece clamping, eccentric press -The clamping angle comes from: an eccentric press -Manufacturer Heilbonn Type: REPV60 -Clamping surface: 600 x 720 mm -Plate thickness: 75 mm -Groove: mm -Surface: milled -Dimensions: 735/900/H545 mm -Weight: 532 kg Ffodpfxoc S Nc Ss Af Dju

Condition: used, Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 160 mm Fedpfsfgwv Dsx Af Defu -Hole spacing: 100 mm/groove: 3 mm -Price: per piece -Number: 3 pieces -Dimensions: 160/14/H50 mm -Weight: 0.8 kg/piece

Condition: used, Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Mounting hole distance: 100 mm -Number: 2 pieces Fedjfgwv Ijpfx Af Dofu -Price: complete -Dimensions: each 160/14/H50 mm -Weight: 0.8 kg/piece

Condition: good (used), Finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine Fjdegylq Sepfx Af Defu -Manufacturer: Homag, profile scraper from edge banding machine BRANDT KM 36 / KM35 -Quantity: 1 piece available -Dimensions: 510/430/H570 mm -Weight: 62 kg

Condition: good (used), Year of construction: 2016, functionality: fully functional, ESC screen printing machine model 600 H/E, semi-automatic, print format max. 400 x 550 mm Precision printing machine with vertical frame lifting designed for high-quality, precise screen printing on foils, scales, circuits, panels, glass, etc. Standard equipment: - vertical frame lifting with pressure in the longitudinal direction from right to left - pneumatic drive, infinitely adjustable - hardened and ground guide shafts with ball guides - pneumatic maintenance unit - pneumatic squeegee head with fine adjustment and automatic, vertical lifting for screen changing and cleaning - flood squeegee device - individual function control for setup operation - individual cycle with operation via foot switch - automatic cycle via timer - modern, synchronized screen frame lifting - print path adjustment infinitely via limit switch - metal vacuum base plate with micrometric fine adjustment in x-y axis - central height adjustment of the Printing unit via trapezoidal thread spindles - stepless squeegee angle adjustment readable via scale - squeegee quick release fasteners - printing and flood squeegee separately adjustable via pressure regulator and readable via pressure gauge Technical data model 600 H/E: Vacuum plate: 500 x 700 mm max. printing format: 400 x 550 mm max. printing material height: 8 mm max. frame format: 600 x 850 mm micrometric fine adjustment: ± 10 mm air consumption: 11.3 I electrical connection: 110V/5A 230V/3.5A max. cycle performance: 1200 p/h Dimensions: Width: 1000 mm Depth: 800 mm Height: 1700 mm Packaging dimensions: 1000 x 880 x 1860 mm Net weight: 250 kg Gross weight: 375 kg • two printing squeegees - length according to customer specifications • two flood squeegees - length according to customer specifications Ffedevvwbfspfx Af Deu Powder Machine 4050 The Powder Machine was specially developed for the easy powdering of DTF transfers. The continuously adjustable film holders allow films up to 40 x 50 cm to be processed. The thermal powder is evenly distributed on the film with one hand. Thanks to the vibration, the excess thermal powder is removed from the film. The thermal powder only sticks to the printed areas. With the Powder Machine you always achieve the optimal application of thermal powder for your transfers. Technical data: Dimensions: 79 x 42 x 64 cm Operating voltage: 230 VAC Power: 35 W Max. format: 40 x 50 cm Time setting: 0 - 3 seconds Volume: less than 70 dB (A) Net weight: 27.5 kg Shipping weight: 44 kg M&R Economax II small dryer

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis - New Vehicle: - NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Ffsdpeydgg Rsfx Af Dou Bodywork: • Carrying out all necessary chassis work for crane installation, removal and installation of components, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and bodywork comply with the body mounting guidelines of the respective chassis manufacturer and are executed accordingly in top quality. • Complete assembly of a special auxiliary frame developed in-house design and manufactured in-house, made of fine-grained steel, for crane and bodywork. The fully welded and chassis-bolted auxiliary frame guarantees exceptional torsional rigidity and perfect stability of the crane vehicle. The distinctive feature is the design of the auxiliary frame. Production is to the highest quality standards and painted in chassis color. • Mounting/bolting the crane and main stabilizer to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front. • Dropside body as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Dropside body painted, paint tone RAL (chassis color) • Removable aluminium drop sides, Suer make, height 600 mm, anodized version with stair steps, removable Kinngripp stanchions • Standard bed with welded 4 mm checkered steel floor, painted RAL (chassis color) • 6 retractable tie-down lashing rings per side, 2500 daN each, mounted in perforated rail for flexible arrangement • 4 chain lashing points, 6500 daN (2 at front and 2 at rear of body) • Robust front wall made of welded frame, welded 4 mm steel plate, 5 accessory hooks, front wall height approx. 1300 mm, steel painted, with 2 foldable lashing eyelets for tensioning straps, welded on • Cover panels, fenders made of aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified; size and position depending on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, double row as agreed, approx. 80 cm from front wall and rear • Brackets (for support pads, crane plates) made of galvanized steel • Additional stabilizer installed under the chassis • Installation of underrun protection at the rear and the additional stabilizer, including hydraulic and electrical connections • Duomatic and red/yellow connectors at the front for semi-trailers and at the rear for trailers New crane, type FASSI F545 RA 2.27, infinitely rotating, fully assembled, installed and configured, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support plates with brackets, arrangement according to production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual and crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 revolving lights on the FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, left and right, arrangement by agreement • 4 LED working lights, 2 left and 2 right under the body in the B

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis – New Vehicle: – NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x4, wheelbase 3,700 mm • Fifth wheel with sliding system and self-lubricating function (type Jost JSK), mounted on the subframe • Reversing camera fully installed. Bodywork: • Execution of all chassis modifications required for crane installation, including removal and reinstallation of add-on parts, exhaust system, tanks, etc. Modification of the vehicle frame as needed. • All chassis and bodywork operations are carried out in strict compliance with the bodybuilder guidelines of the respective chassis manufacturer, ensuring top-quality execution. • Complete assembly of a specially designed and in-house manufactured auxiliary subframe made of high-tensile fine-grained steel for the crane and superstructure. The welded design, bolted to the vehicle chassis, ensures maximum torsional stiffness and optimal crane stability. The unique feature of this subframe is its construction type. Executed to the highest quality standard and painted in the chassis color. • Mounting/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front • Removable steel flatbed as a welded construction • Length approx. 380 cm, width approx. 248 cm • Flatbed superstructure painted in RAL (chassis color) • Removable aluminum sideboards, manufacturer Suer, height 600 mm, anodized finish with stair steps, removable posts with "Kinngrip" feature • Standard flatbed floor made of welded, painted 4 mm steel chequer plate in RAL (chassis color) • 6 recessed lashing rings (2,500 daN each side), mounted in slotted profile with flexible positioning • 4 chain lashing points 6,500 daN (2 front, 2 rear on the superstructure) • Stable front wall made of welded frame, welded 4 mm steel plate and 5 accessory hooks, front wall height approx. 1,300 mm, version painted steel, with 2 folding lashing eyes welded on for tensioning straps • Panel sheeting, fenders made of aluminum chequer plate (sandblasted, powder-coated and painted). Please indicate RAL color references. • 2 BROSSBOX toolboxes, made of aluminum chequer plate (sandblasted, powder-coated, painted). Please indicate RAL color references; size and placement depend on wheelbase and available space. • 1 BROSSBOX toolbox mounted between crane and front wall. • Multifix stake pockets, 2 rows (as agreed), positioned approx. 80 cm from front wall and rear. • Holders (for support pads, crane plates) made of galvanized steel • Additional stabilizer mounted under the chassis • Installation of underrun protection at the rear and on the additional stabilizer, including all hydraulic and electrical connections • Duomatic and red/yellow (trailer) sockets, at the front for semi-trailer, also at rear for trailer New crane, type FASSI F545 RA 2.27, continuous rotation, fully mounted, installed and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support pads with holders, arrangement according to production drawing • AWC (automatic cable length control) • Operating manual, maintenance manual and crane inspection book Lighting: • 2 LED worklights integrated in front wall • 2 beacon lights on FH cab roof Ffodeydggwspfx Af Dou • 2 strobe lights in engine bonnet • 2 LEDs under the superstructure at the rear, left and right, arrangement to be agreed • 4 LED worklights, 2 left and 2 right under the body in area B

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle Description Fsdpfxeydggqo Af Defu Chassis – New Vehicle: – NEW MODEL 2025 • Manufacturer/Type: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel coupling with sliding mechanism and self-lubricating (Jost JSK type), mounted on support frame • Reversing camera fully installed Bodywork: • Execution of all chassis modifications required for crane installation, including removal and installation of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork modifications are carried out in strict compliance with the bodybuilder guidelines of the respective chassis manufacturer and executed in premium quality. • Complete assembly of a proprietary designed and in-house manufactured special subframe made of fine-grained steel for crane and superstructure. The fully welded and bolted subframe to the chassis frame guarantees exceptional torsional rigidity and outstanding stability for the crane vehicle. A unique feature is the subframe construction, executed to the highest quality and coated in chassis color. • Installation/bolting of the crane and main outrigger support on the subframe. Installation of all hydraulic and electrical connections. Installation position: Front • Removable drop-side platform in steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Platform body painted in RAL (chassis colour) • Removable aluminium side boards by Suer, height 600 mm, anodised finish with step treads, removable Kinngripp stakes • Standard platform floor with welded 4 mm steel checker plate painted in RAL (chassis color) • 6 retractable lashing eyes, 2500 daN each side, set in perforated rails for flexible arrangement • 4 chain lashing points 6500 daN (2 front, 2 rear on body) • Robust front wall made from welded frame, welded 4 mm sheet steel and 5 accessory hooks, wall height approx. 1300 mm, painted steel version, with 2 folding lashing eyes welded on for securing straps • Cladding panels, mudguards made from aluminium checker plate (sandblasted, powder-coated, and painted); please specify RAL color • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder-coated, and painted); specify RAL color; size and arrangement depend on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stake pockets, 2 rows (as agreed), approx. 80 cm from front and rear walls • Holders (for outrigger pads, crane plates) made of galvanized steel • Additional stabilizing support mounted under chassis • Installation of underride protection at rear and additional stabilizer, including installation of hydraulic and electrical connections • Duomatic and red/yellow connections at front for semi-trailers and also at rear for trailers New crane, FASSI F545 RA 2.27, continuous rotation, fully assembled, installed and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support pads with holders, arrangement per production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual, crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 beacons on the FH roof • 2 strobe lights in engine hood • 2 LED lights under bodywork at rear, left and right, position per agreement • 4 LED working lights, 2 each left and right

Condition: new, 0 5.000 kg height 500 mm width 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking Ffjdpfx Afoxaak He Dju techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 35 kg